| Alphascale Clock Controller |
| |
| The ACC (Alphascale Clock Controller) is responsible of choising proper |
| clock source, setting deviders and clock gates. |
| |
| Required properties for the ACC node: |
| - compatible: must be "alphascale,asm9260-clock-controller" |
| - reg: must contain the ACC register base and size |
| - #clock-cells : shall be set to 1. |
| |
| Simple one-cell clock specifier format is used, where the only cell is used |
| as an index of the clock inside the provider. |
| It is encouraged to use dt-binding for clock index definitions. SoC specific |
| dt-binding should be included to the device tree descriptor. For example |
| Alphascale ASM9260: |
| #include <dt-bindings/clock/alphascale,asm9260.h> |
| |
| This binding contains two types of clock providers: |
| _AHB_ - AHB gate; |
| _SYS_ - adjustable clock source. Not all peripheral have _SYS_ clock provider. |
| All clock specific details can be found in the SoC documentation. |
| CLKID_AHB_ROM 0 |
| CLKID_AHB_RAM 1 |
| CLKID_AHB_GPIO 2 |
| CLKID_AHB_MAC 3 |
| CLKID_AHB_EMI 4 |
| CLKID_AHB_USB0 5 |
| CLKID_AHB_USB1 6 |
| CLKID_AHB_DMA0 7 |
| CLKID_AHB_DMA1 8 |
| CLKID_AHB_UART0 9 |
| CLKID_AHB_UART1 10 |
| CLKID_AHB_UART2 11 |
| CLKID_AHB_UART3 12 |
| CLKID_AHB_UART4 13 |
| CLKID_AHB_UART5 14 |
| CLKID_AHB_UART6 15 |
| CLKID_AHB_UART7 16 |
| CLKID_AHB_UART8 17 |
| CLKID_AHB_UART9 18 |
| CLKID_AHB_I2S0 19 |
| CLKID_AHB_I2C0 20 |
| CLKID_AHB_I2C1 21 |
| CLKID_AHB_SSP0 22 |
| CLKID_AHB_IOCONFIG 23 |
| CLKID_AHB_WDT 24 |
| CLKID_AHB_CAN0 25 |
| CLKID_AHB_CAN1 26 |
| CLKID_AHB_MPWM 27 |
| CLKID_AHB_SPI0 28 |
| CLKID_AHB_SPI1 29 |
| CLKID_AHB_QEI 30 |
| CLKID_AHB_QUADSPI0 31 |
| CLKID_AHB_CAMIF 32 |
| CLKID_AHB_LCDIF 33 |
| CLKID_AHB_TIMER0 34 |
| CLKID_AHB_TIMER1 35 |
| CLKID_AHB_TIMER2 36 |
| CLKID_AHB_TIMER3 37 |
| CLKID_AHB_IRQ 38 |
| CLKID_AHB_RTC 39 |
| CLKID_AHB_NAND 40 |
| CLKID_AHB_ADC0 41 |
| CLKID_AHB_LED 42 |
| CLKID_AHB_DAC0 43 |
| CLKID_AHB_LCD 44 |
| CLKID_AHB_I2S1 45 |
| CLKID_AHB_MAC1 46 |
| |
| CLKID_SYS_CPU 47 |
| CLKID_SYS_AHB 48 |
| CLKID_SYS_I2S0M 49 |
| CLKID_SYS_I2S0S 50 |
| CLKID_SYS_I2S1M 51 |
| CLKID_SYS_I2S1S 52 |
| CLKID_SYS_UART0 53 |
| CLKID_SYS_UART1 54 |
| CLKID_SYS_UART2 55 |
| CLKID_SYS_UART3 56 |
| CLKID_SYS_UART4 56 |
| CLKID_SYS_UART5 57 |
| CLKID_SYS_UART6 58 |
| CLKID_SYS_UART7 59 |
| CLKID_SYS_UART8 60 |
| CLKID_SYS_UART9 61 |
| CLKID_SYS_SPI0 62 |
| CLKID_SYS_SPI1 63 |
| CLKID_SYS_QUADSPI 64 |
| CLKID_SYS_SSP0 65 |
| CLKID_SYS_NAND 66 |
| CLKID_SYS_TRACE 67 |
| CLKID_SYS_CAMM 68 |
| CLKID_SYS_WDT 69 |
| CLKID_SYS_CLKOUT 70 |
| CLKID_SYS_MAC 71 |
| CLKID_SYS_LCD 72 |
| CLKID_SYS_ADCANA 73 |
| |
| Example of clock consumer with _SYS_ and _AHB_ sinks. |
| uart4: serial@80010000 { |
| compatible = "alphascale,asm9260-uart"; |
| reg = <0x80010000 0x4000>; |
| clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>; |
| interrupts = <19>; |
| status = "disabled"; |
| }; |
| |
| Clock consumer with only one, _AHB_ sink. |
| timer0: timer@80088000 { |
| compatible = "alphascale,asm9260-timer"; |
| reg = <0x80088000 0x4000>; |
| clocks = <&acc CLKID_AHB_TIMER0>; |
| interrupts = <29>; |
| }; |
| |
