| /* |
| * Copyright 2010 Tilera Corporation. All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation, version 2. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for |
| * more details. |
| * |
| * From i386 code copyright (C) 1995 Linus Torvalds |
| */ |
| |
| #include <linux/signal.h> |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/types.h> |
| #include <linux/ptrace.h> |
| #include <linux/mman.h> |
| #include <linux/mm.h> |
| #include <linux/smp.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/tty.h> |
| #include <linux/vt_kern.h> /* For unblank_screen() */ |
| #include <linux/highmem.h> |
| #include <linux/module.h> |
| #include <linux/kprobes.h> |
| #include <linux/hugetlb.h> |
| #include <linux/syscalls.h> |
| #include <linux/uaccess.h> |
| #include <linux/kdebug.h> |
| |
| #include <asm/pgalloc.h> |
| #include <asm/sections.h> |
| #include <asm/traps.h> |
| #include <asm/syscalls.h> |
| |
| #include <arch/interrupts.h> |
| |
| static noinline void force_sig_info_fault(const char *type, int si_signo, |
| int si_code, unsigned long address, |
| int fault_num, |
| struct task_struct *tsk, |
| struct pt_regs *regs) |
| { |
| siginfo_t info; |
| |
| if (unlikely(tsk->pid < 2)) { |
| panic("Signal %d (code %d) at %#lx sent to %s!", |
| si_signo, si_code & 0xffff, address, |
| is_idle_task(tsk) ? "the idle task" : "init"); |
| } |
| |
| info.si_signo = si_signo; |
| info.si_errno = 0; |
| info.si_code = si_code; |
| info.si_addr = (void __user *)address; |
| info.si_trapno = fault_num; |
| trace_unhandled_signal(type, regs, address, si_signo); |
| force_sig_info(si_signo, &info, tsk); |
| } |
| |
| #ifndef __tilegx__ |
| /* |
| * Synthesize the fault a PL0 process would get by doing a word-load of |
| * an unaligned address or a high kernel address. |
| */ |
| SYSCALL_DEFINE1(cmpxchg_badaddr, unsigned long, address) |
| { |
| struct pt_regs *regs = current_pt_regs(); |
| |
| if (address >= PAGE_OFFSET) |
| force_sig_info_fault("atomic segfault", SIGSEGV, SEGV_MAPERR, |
| address, INT_DTLB_MISS, current, regs); |
| else |
| force_sig_info_fault("atomic alignment fault", SIGBUS, |
| BUS_ADRALN, address, |
| INT_UNALIGN_DATA, current, regs); |
| |
| /* |
| * Adjust pc to point at the actual instruction, which is unusual |
| * for syscalls normally, but is appropriate when we are claiming |
| * that a syscall swint1 caused a page fault or bus error. |
| */ |
| regs->pc -= 8; |
| |
| /* |
| * Mark this as a caller-save interrupt, like a normal page fault, |
| * so that when we go through the signal handler path we will |
| * properly restore r0, r1, and r2 for the signal handler arguments. |
| */ |
| regs->flags |= PT_FLAGS_CALLER_SAVES; |
| |
| return 0; |
| } |
| #endif |
| |
| static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address) |
| { |
| unsigned index = pgd_index(address); |
| pgd_t *pgd_k; |
| pud_t *pud, *pud_k; |
| pmd_t *pmd, *pmd_k; |
| |
| pgd += index; |
| pgd_k = init_mm.pgd + index; |
| |
| if (!pgd_present(*pgd_k)) |
| return NULL; |
| |
| pud = pud_offset(pgd, address); |
| pud_k = pud_offset(pgd_k, address); |
| if (!pud_present(*pud_k)) |
| return NULL; |
| |
| pmd = pmd_offset(pud, address); |
| pmd_k = pmd_offset(pud_k, address); |
| if (!pmd_present(*pmd_k)) |
| return NULL; |
| if (!pmd_present(*pmd)) |
| set_pmd(pmd, *pmd_k); |
| else |
| BUG_ON(pmd_ptfn(*pmd) != pmd_ptfn(*pmd_k)); |
| return pmd_k; |
| } |
| |
| /* |
| * Handle a fault on the vmalloc area. |
| */ |
| static inline int vmalloc_fault(pgd_t *pgd, unsigned long address) |
| { |
| pmd_t *pmd_k; |
| pte_t *pte_k; |
| |
| /* Make sure we are in vmalloc area */ |
| if (!(address >= VMALLOC_START && address < VMALLOC_END)) |
| return -1; |
| |
| /* |
| * Synchronize this task's top level page-table |
| * with the 'reference' page table. |
| */ |
| pmd_k = vmalloc_sync_one(pgd, address); |
| if (!pmd_k) |
| return -1; |
| pte_k = pte_offset_kernel(pmd_k, address); |
| if (!pte_present(*pte_k)) |
| return -1; |
| return 0; |
| } |
| |
| /* Wait until this PTE has completed migration. */ |
| static void wait_for_migration(pte_t *pte) |
| { |
| if (pte_migrating(*pte)) { |
| /* |
| * Wait until the migrater fixes up this pte. |
| * We scale the loop count by the clock rate so we'll wait for |
| * a few seconds here. |
| */ |
| int retries = 0; |
| int bound = get_clock_rate(); |
| while (pte_migrating(*pte)) { |
| barrier(); |
| if (++retries > bound) |
| panic("Hit migrating PTE (%#llx) and page PFN %#lx still migrating", |
| pte->val, pte_pfn(*pte)); |
| } |
| } |
| } |
| |
| /* |
| * It's not generally safe to use "current" to get the page table pointer, |
| * since we might be running an oprofile interrupt in the middle of a |
| * task switch. |
| */ |
| static pgd_t *get_current_pgd(void) |
| { |
| HV_Context ctx = hv_inquire_context(); |
| unsigned long pgd_pfn = ctx.page_table >> PAGE_SHIFT; |
| struct page *pgd_page = pfn_to_page(pgd_pfn); |
| BUG_ON(PageHighMem(pgd_page)); |
| return (pgd_t *) __va(ctx.page_table); |
| } |
| |
| /* |
| * We can receive a page fault from a migrating PTE at any time. |
| * Handle it by just waiting until the fault resolves. |
| * |
| * It's also possible to get a migrating kernel PTE that resolves |
| * itself during the downcall from hypervisor to Linux. We just check |
| * here to see if the PTE seems valid, and if so we retry it. |
| * |
| * NOTE! We MUST NOT take any locks for this case. We may be in an |
| * interrupt or a critical region, and must do as little as possible. |
| * Similarly, we can't use atomic ops here, since we may be handling a |
| * fault caused by an atomic op access. |
| * |
| * If we find a migrating PTE while we're in an NMI context, and we're |
| * at a PC that has a registered exception handler, we don't wait, |
| * since this thread may (e.g.) have been interrupted while migrating |
| * its own stack, which would then cause us to self-deadlock. |
| */ |
| static int handle_migrating_pte(pgd_t *pgd, int fault_num, |
| unsigned long address, unsigned long pc, |
| int is_kernel_mode, int write) |
| { |
| pud_t *pud; |
| pmd_t *pmd; |
| pte_t *pte; |
| pte_t pteval; |
| |
| if (pgd_addr_invalid(address)) |
| return 0; |
| |
| pgd += pgd_index(address); |
| pud = pud_offset(pgd, address); |
| if (!pud || !pud_present(*pud)) |
| return 0; |
| pmd = pmd_offset(pud, address); |
| if (!pmd || !pmd_present(*pmd)) |
| return 0; |
| pte = pmd_huge_page(*pmd) ? ((pte_t *)pmd) : |
| pte_offset_kernel(pmd, address); |
| pteval = *pte; |
| if (pte_migrating(pteval)) { |
| if (in_nmi() && search_exception_tables(pc)) |
| return 0; |
| wait_for_migration(pte); |
| return 1; |
| } |
| |
| if (!is_kernel_mode || !pte_present(pteval)) |
| return 0; |
| if (fault_num == INT_ITLB_MISS) { |
| if (pte_exec(pteval)) |
| return 1; |
| } else if (write) { |
| if (pte_write(pteval)) |
| return 1; |
| } else { |
| if (pte_read(pteval)) |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * This routine is responsible for faulting in user pages. |
| * It passes the work off to one of the appropriate routines. |
| * It returns true if the fault was successfully handled. |
| */ |
| static int handle_page_fault(struct pt_regs *regs, |
| int fault_num, |
| int is_page_fault, |
| unsigned long address, |
| int write) |
| { |
| struct task_struct *tsk; |
| struct mm_struct *mm; |
| struct vm_area_struct *vma; |
| unsigned long stack_offset; |
| int fault; |
| int si_code; |
| int is_kernel_mode; |
| pgd_t *pgd; |
| unsigned int flags; |
| |
| /* on TILE, protection faults are always writes */ |
| if (!is_page_fault) |
| write = 1; |
| |
| flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; |
| |
| is_kernel_mode = !user_mode(regs); |
| |
| tsk = validate_current(); |
| |
| /* |
| * Check to see if we might be overwriting the stack, and bail |
| * out if so. The page fault code is a relatively likely |
| * place to get trapped in an infinite regress, and once we |
| * overwrite the whole stack, it becomes very hard to recover. |
| */ |
| stack_offset = stack_pointer & (THREAD_SIZE-1); |
| if (stack_offset < THREAD_SIZE / 8) { |
| pr_alert("Potential stack overrun: sp %#lx\n", stack_pointer); |
| show_regs(regs); |
| pr_alert("Killing current process %d/%s\n", |
| tsk->pid, tsk->comm); |
| do_group_exit(SIGKILL); |
| } |
| |
| /* |
| * Early on, we need to check for migrating PTE entries; |
| * see homecache.c. If we find a migrating PTE, we wait until |
| * the backing page claims to be done migrating, then we proceed. |
| * For kernel PTEs, we rewrite the PTE and return and retry. |
| * Otherwise, we treat the fault like a normal "no PTE" fault, |
| * rather than trying to patch up the existing PTE. |
| */ |
| pgd = get_current_pgd(); |
| if (handle_migrating_pte(pgd, fault_num, address, regs->pc, |
| is_kernel_mode, write)) |
| return 1; |
| |
| si_code = SEGV_MAPERR; |
| |
| /* |
| * We fault-in kernel-space virtual memory on-demand. The |
| * 'reference' page table is init_mm.pgd. |
| * |
| * NOTE! We MUST NOT take any locks for this case. We may |
| * be in an interrupt or a critical region, and should |
| * only copy the information from the master page table, |
| * nothing more. |
| * |
| * This verifies that the fault happens in kernel space |
| * and that the fault was not a protection fault. |
| */ |
| if (unlikely(address >= TASK_SIZE && |
| !is_arch_mappable_range(address, 0))) { |
| if (is_kernel_mode && is_page_fault && |
| vmalloc_fault(pgd, address) >= 0) |
| return 1; |
| /* |
| * Don't take the mm semaphore here. If we fixup a prefetch |
| * fault we could otherwise deadlock. |
| */ |
| mm = NULL; /* happy compiler */ |
| vma = NULL; |
| goto bad_area_nosemaphore; |
| } |
| |
| /* |
| * If we're trying to touch user-space addresses, we must |
| * be either at PL0, or else with interrupts enabled in the |
| * kernel, so either way we can re-enable interrupts here |
| * unless we are doing atomic access to user space with |
| * interrupts disabled. |
| */ |
| if (!(regs->flags & PT_FLAGS_DISABLE_IRQ)) |
| local_irq_enable(); |
| |
| mm = tsk->mm; |
| |
| /* |
| * If we're in an interrupt, have no user context or are running in an |
| * region with pagefaults disabled then we must not take the fault. |
| */ |
| if (pagefault_disabled() || !mm) { |
| vma = NULL; /* happy compiler */ |
| goto bad_area_nosemaphore; |
| } |
| |
| if (!is_kernel_mode) |
| flags |= FAULT_FLAG_USER; |
| |
| /* |
| * When running in the kernel we expect faults to occur only to |
| * addresses in user space. All other faults represent errors in the |
| * kernel and should generate an OOPS. Unfortunately, in the case of an |
| * erroneous fault occurring in a code path which already holds mmap_sem |
| * we will deadlock attempting to validate the fault against the |
| * address space. Luckily the kernel only validly references user |
| * space from well defined areas of code, which are listed in the |
| * exceptions table. |
| * |
| * As the vast majority of faults will be valid we will only perform |
| * the source reference check when there is a possibility of a deadlock. |
| * Attempt to lock the address space, if we cannot we then validate the |
| * source. If this is invalid we can skip the address space check, |
| * thus avoiding the deadlock. |
| */ |
| if (!down_read_trylock(&mm->mmap_sem)) { |
| if (is_kernel_mode && |
| !search_exception_tables(regs->pc)) { |
| vma = NULL; /* happy compiler */ |
| goto bad_area_nosemaphore; |
| } |
| |
| retry: |
| down_read(&mm->mmap_sem); |
| } |
| |
| vma = find_vma(mm, address); |
| if (!vma) |
| goto bad_area; |
| if (vma->vm_start <= address) |
| goto good_area; |
| if (!(vma->vm_flags & VM_GROWSDOWN)) |
| goto bad_area; |
| if (regs->sp < PAGE_OFFSET) { |
| /* |
| * accessing the stack below sp is always a bug. |
| */ |
| if (address < regs->sp) |
| goto bad_area; |
| } |
| if (expand_stack(vma, address)) |
| goto bad_area; |
| |
| /* |
| * Ok, we have a good vm_area for this memory access, so |
| * we can handle it.. |
| */ |
| good_area: |
| si_code = SEGV_ACCERR; |
| if (fault_num == INT_ITLB_MISS) { |
| if (!(vma->vm_flags & VM_EXEC)) |
| goto bad_area; |
| } else if (write) { |
| #ifdef TEST_VERIFY_AREA |
| if (!is_page_fault && regs->cs == KERNEL_CS) |
| pr_err("WP fault at " REGFMT "\n", regs->eip); |
| #endif |
| if (!(vma->vm_flags & VM_WRITE)) |
| goto bad_area; |
| flags |= FAULT_FLAG_WRITE; |
| } else { |
| if (!is_page_fault || !(vma->vm_flags & VM_READ)) |
| goto bad_area; |
| } |
| |
| /* |
| * If for any reason at all we couldn't handle the fault, |
| * make sure we exit gracefully rather than endlessly redo |
| * the fault. |
| */ |
| fault = handle_mm_fault(mm, vma, address, flags); |
| |
| if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) |
| return 0; |
| |
| if (unlikely(fault & VM_FAULT_ERROR)) { |
| if (fault & VM_FAULT_OOM) |
| goto out_of_memory; |
| else if (fault & VM_FAULT_SIGSEGV) |
| goto bad_area; |
| else if (fault & VM_FAULT_SIGBUS) |
| goto do_sigbus; |
| BUG(); |
| } |
| if (flags & FAULT_FLAG_ALLOW_RETRY) { |
| if (fault & VM_FAULT_MAJOR) |
| tsk->maj_flt++; |
| else |
| tsk->min_flt++; |
| if (fault & VM_FAULT_RETRY) { |
| flags &= ~FAULT_FLAG_ALLOW_RETRY; |
| flags |= FAULT_FLAG_TRIED; |
| |
| /* |
| * No need to up_read(&mm->mmap_sem) as we would |
| * have already released it in __lock_page_or_retry |
| * in mm/filemap.c. |
| */ |
| goto retry; |
| } |
| } |
| |
| #if CHIP_HAS_TILE_DMA() |
| /* If this was a DMA TLB fault, restart the DMA engine. */ |
| switch (fault_num) { |
| case INT_DMATLB_MISS: |
| case INT_DMATLB_MISS_DWNCL: |
| case INT_DMATLB_ACCESS: |
| case INT_DMATLB_ACCESS_DWNCL: |
| __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__REQUEST_MASK); |
| break; |
| } |
| #endif |
| |
| up_read(&mm->mmap_sem); |
| return 1; |
| |
| /* |
| * Something tried to access memory that isn't in our memory map.. |
| * Fix it, but check if it's kernel or user first.. |
| */ |
| bad_area: |
| up_read(&mm->mmap_sem); |
| |
| bad_area_nosemaphore: |
| /* User mode accesses just cause a SIGSEGV */ |
| if (!is_kernel_mode) { |
| /* |
| * It's possible to have interrupts off here. |
| */ |
| local_irq_enable(); |
| |
| force_sig_info_fault("segfault", SIGSEGV, si_code, address, |
| fault_num, tsk, regs); |
| return 0; |
| } |
| |
| no_context: |
| /* Are we prepared to handle this kernel fault? */ |
| if (fixup_exception(regs)) |
| return 0; |
| |
| /* |
| * Oops. The kernel tried to access some bad page. We'll have to |
| * terminate things with extreme prejudice. |
| */ |
| |
| bust_spinlocks(1); |
| |
| /* FIXME: no lookup_address() yet */ |
| #ifdef SUPPORT_LOOKUP_ADDRESS |
| if (fault_num == INT_ITLB_MISS) { |
| pte_t *pte = lookup_address(address); |
| |
| if (pte && pte_present(*pte) && !pte_exec_kernel(*pte)) |
| pr_crit("kernel tried to execute non-executable page - exploit attempt? (uid: %d)\n", |
| current->uid); |
| } |
| #endif |
| if (address < PAGE_SIZE) |
| pr_alert("Unable to handle kernel NULL pointer dereference\n"); |
| else |
| pr_alert("Unable to handle kernel paging request\n"); |
| pr_alert(" at virtual address " REGFMT ", pc " REGFMT "\n", |
| address, regs->pc); |
| |
| show_regs(regs); |
| |
| if (unlikely(tsk->pid < 2)) { |
| panic("Kernel page fault running %s!", |
| is_idle_task(tsk) ? "the idle task" : "init"); |
| } |
| |
| /* |
| * More FIXME: we should probably copy the i386 here and |
| * implement a generic die() routine. Not today. |
| */ |
| #ifdef SUPPORT_DIE |
| die("Oops", regs); |
| #endif |
| bust_spinlocks(1); |
| |
| do_group_exit(SIGKILL); |
| |
| /* |
| * We ran out of memory, or some other thing happened to us that made |
| * us unable to handle the page fault gracefully. |
| */ |
| out_of_memory: |
| up_read(&mm->mmap_sem); |
| if (is_kernel_mode) |
| goto no_context; |
| pagefault_out_of_memory(); |
| return 0; |
| |
| do_sigbus: |
| up_read(&mm->mmap_sem); |
| |
| /* Kernel mode? Handle exceptions or die */ |
| if (is_kernel_mode) |
| goto no_context; |
| |
| force_sig_info_fault("bus error", SIGBUS, BUS_ADRERR, address, |
| fault_num, tsk, regs); |
| return 0; |
| } |
| |
| #ifndef __tilegx__ |
| |
| /* We must release ICS before panicking or we won't get anywhere. */ |
| #define ics_panic(fmt, ...) \ |
| do { \ |
| __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); \ |
| panic(fmt, ##__VA_ARGS__); \ |
| } while (0) |
| |
| /* |
| * When we take an ITLB or DTLB fault or access violation in the |
| * supervisor while the critical section bit is set, the hypervisor is |
| * reluctant to write new values into the EX_CONTEXT_K_x registers, |
| * since that might indicate we have not yet squirreled the SPR |
| * contents away and can thus safely take a recursive interrupt. |
| * Accordingly, the hypervisor passes us the PC via SYSTEM_SAVE_K_2. |
| * |
| * Note that this routine is called before homecache_tlb_defer_enter(), |
| * which means that we can properly unlock any atomics that might |
| * be used there (good), but also means we must be very sensitive |
| * to not touch any data structures that might be located in memory |
| * that could migrate, as we could be entering the kernel on a dataplane |
| * cpu that has been deferring kernel TLB updates. This means, for |
| * example, that we can't migrate init_mm or its pgd. |
| */ |
| struct intvec_state do_page_fault_ics(struct pt_regs *regs, int fault_num, |
| unsigned long address, |
| unsigned long info) |
| { |
| unsigned long pc = info & ~1; |
| int write = info & 1; |
| pgd_t *pgd = get_current_pgd(); |
| |
| /* Retval is 1 at first since we will handle the fault fully. */ |
| struct intvec_state state = { |
| do_page_fault, fault_num, address, write, 1 |
| }; |
| |
| /* Validate that we are plausibly in the right routine. */ |
| if ((pc & 0x7) != 0 || pc < PAGE_OFFSET || |
| (fault_num != INT_DTLB_MISS && |
| fault_num != INT_DTLB_ACCESS)) { |
| unsigned long old_pc = regs->pc; |
| regs->pc = pc; |
| ics_panic("Bad ICS page fault args: old PC %#lx, fault %d/%d at %#lx", |
| old_pc, fault_num, write, address); |
| } |
| |
| /* We might be faulting on a vmalloc page, so check that first. */ |
| if (fault_num != INT_DTLB_ACCESS && vmalloc_fault(pgd, address) >= 0) |
| return state; |
| |
| /* |
| * If we faulted with ICS set in sys_cmpxchg, we are providing |
| * a user syscall service that should generate a signal on |
| * fault. We didn't set up a kernel stack on initial entry to |
| * sys_cmpxchg, but instead had one set up by the fault, which |
| * (because sys_cmpxchg never releases ICS) came to us via the |
| * SYSTEM_SAVE_K_2 mechanism, and thus EX_CONTEXT_K_[01] are |
| * still referencing the original user code. We release the |
| * atomic lock and rewrite pt_regs so that it appears that we |
| * came from user-space directly, and after we finish the |
| * fault we'll go back to user space and re-issue the swint. |
| * This way the backtrace information is correct if we need to |
| * emit a stack dump at any point while handling this. |
| * |
| * Must match register use in sys_cmpxchg(). |
| */ |
| if (pc >= (unsigned long) sys_cmpxchg && |
| pc < (unsigned long) __sys_cmpxchg_end) { |
| #ifdef CONFIG_SMP |
| /* Don't unlock before we could have locked. */ |
| if (pc >= (unsigned long)__sys_cmpxchg_grab_lock) { |
| int *lock_ptr = (int *)(regs->regs[ATOMIC_LOCK_REG]); |
| __atomic_fault_unlock(lock_ptr); |
| } |
| #endif |
| regs->sp = regs->regs[27]; |
| } |
| |
| /* |
| * We can also fault in the atomic assembly, in which |
| * case we use the exception table to do the first-level fixup. |
| * We may re-fixup again in the real fault handler if it |
| * turns out the faulting address is just bad, and not, |
| * for example, migrating. |
| */ |
| else if (pc >= (unsigned long) __start_atomic_asm_code && |
| pc < (unsigned long) __end_atomic_asm_code) { |
| const struct exception_table_entry *fixup; |
| #ifdef CONFIG_SMP |
| /* Unlock the atomic lock. */ |
| int *lock_ptr = (int *)(regs->regs[ATOMIC_LOCK_REG]); |
| __atomic_fault_unlock(lock_ptr); |
| #endif |
| fixup = search_exception_tables(pc); |
| if (!fixup) |
| ics_panic("ICS atomic fault not in table: PC %#lx, fault %d", |
| pc, fault_num); |
| regs->pc = fixup->fixup; |
| regs->ex1 = PL_ICS_EX1(KERNEL_PL, 0); |
| } |
| |
| /* |
| * Now that we have released the atomic lock (if necessary), |
| * it's safe to spin if the PTE that caused the fault was migrating. |
| */ |
| if (fault_num == INT_DTLB_ACCESS) |
| write = 1; |
| if (handle_migrating_pte(pgd, fault_num, address, pc, 1, write)) |
| return state; |
| |
| /* Return zero so that we continue on with normal fault handling. */ |
| state.retval = 0; |
| return state; |
| } |
| |
| #endif /* !__tilegx__ */ |
| |
| /* |
| * This routine handles page faults. It determines the address, and the |
| * problem, and then passes it handle_page_fault() for normal DTLB and |
| * ITLB issues, and for DMA or SN processor faults when we are in user |
| * space. For the latter, if we're in kernel mode, we just save the |
| * interrupt away appropriately and return immediately. We can't do |
| * page faults for user code while in kernel mode. |
| */ |
| static inline void __do_page_fault(struct pt_regs *regs, int fault_num, |
| unsigned long address, unsigned long write) |
| { |
| int is_page_fault; |
| |
| #ifdef CONFIG_KPROBES |
| /* |
| * This is to notify the fault handler of the kprobes. The |
| * exception code is redundant as it is also carried in REGS, |
| * but we pass it anyhow. |
| */ |
| if (notify_die(DIE_PAGE_FAULT, "page fault", regs, -1, |
| regs->faultnum, SIGSEGV) == NOTIFY_STOP) |
| return; |
| #endif |
| |
| #ifdef __tilegx__ |
| /* |
| * We don't need early do_page_fault_ics() support, since unlike |
| * Pro we don't need to worry about unlocking the atomic locks. |
| * There is only one current case in GX where we touch any memory |
| * under ICS other than our own kernel stack, and we handle that |
| * here. (If we crash due to trying to touch our own stack, |
| * we're in too much trouble for C code to help out anyway.) |
| */ |
| if (write & ~1) { |
| unsigned long pc = write & ~1; |
| if (pc >= (unsigned long) __start_unalign_asm_code && |
| pc < (unsigned long) __end_unalign_asm_code) { |
| struct thread_info *ti = current_thread_info(); |
| /* |
| * Our EX_CONTEXT is still what it was from the |
| * initial unalign exception, but now we've faulted |
| * on the JIT page. We would like to complete the |
| * page fault however is appropriate, and then retry |
| * the instruction that caused the unalign exception. |
| * Our state has been "corrupted" by setting the low |
| * bit in "sp", and stashing r0..r3 in the |
| * thread_info area, so we revert all of that, then |
| * continue as if this were a normal page fault. |
| */ |
| regs->sp &= ~1UL; |
| regs->regs[0] = ti->unalign_jit_tmp[0]; |
| regs->regs[1] = ti->unalign_jit_tmp[1]; |
| regs->regs[2] = ti->unalign_jit_tmp[2]; |
| regs->regs[3] = ti->unalign_jit_tmp[3]; |
| write &= 1; |
| } else { |
| pr_alert("%s/%d: ICS set at page fault at %#lx: %#lx\n", |
| current->comm, current->pid, pc, address); |
| show_regs(regs); |
| do_group_exit(SIGKILL); |
| } |
| } |
| #else |
| /* This case should have been handled by do_page_fault_ics(). */ |
| BUG_ON(write & ~1); |
| #endif |
| |
| #if CHIP_HAS_TILE_DMA() |
| /* |
| * If it's a DMA fault, suspend the transfer while we're |
| * handling the miss; we'll restart after it's handled. If we |
| * don't suspend, it's possible that this process could swap |
| * out and back in, and restart the engine since the DMA is |
| * still 'running'. |
| */ |
| if (fault_num == INT_DMATLB_MISS || |
| fault_num == INT_DMATLB_ACCESS || |
| fault_num == INT_DMATLB_MISS_DWNCL || |
| fault_num == INT_DMATLB_ACCESS_DWNCL) { |
| __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__SUSPEND_MASK); |
| while (__insn_mfspr(SPR_DMA_USER_STATUS) & |
| SPR_DMA_STATUS__BUSY_MASK) |
| ; |
| } |
| #endif |
| |
| /* Validate fault num and decide if this is a first-time page fault. */ |
| switch (fault_num) { |
| case INT_ITLB_MISS: |
| case INT_DTLB_MISS: |
| #if CHIP_HAS_TILE_DMA() |
| case INT_DMATLB_MISS: |
| case INT_DMATLB_MISS_DWNCL: |
| #endif |
| is_page_fault = 1; |
| break; |
| |
| case INT_DTLB_ACCESS: |
| #if CHIP_HAS_TILE_DMA() |
| case INT_DMATLB_ACCESS: |
| case INT_DMATLB_ACCESS_DWNCL: |
| #endif |
| is_page_fault = 0; |
| break; |
| |
| default: |
| panic("Bad fault number %d in do_page_fault", fault_num); |
| } |
| |
| #if CHIP_HAS_TILE_DMA() |
| if (!user_mode(regs)) { |
| struct async_tlb *async; |
| switch (fault_num) { |
| #if CHIP_HAS_TILE_DMA() |
| case INT_DMATLB_MISS: |
| case INT_DMATLB_ACCESS: |
| case INT_DMATLB_MISS_DWNCL: |
| case INT_DMATLB_ACCESS_DWNCL: |
| async = ¤t->thread.dma_async_tlb; |
| break; |
| #endif |
| default: |
| async = NULL; |
| } |
| if (async) { |
| |
| /* |
| * No vmalloc check required, so we can allow |
| * interrupts immediately at this point. |
| */ |
| local_irq_enable(); |
| |
| set_thread_flag(TIF_ASYNC_TLB); |
| if (async->fault_num != 0) { |
| panic("Second async fault %d; old fault was %d (%#lx/%ld)", |
| fault_num, async->fault_num, |
| address, write); |
| } |
| BUG_ON(fault_num == 0); |
| async->fault_num = fault_num; |
| async->is_fault = is_page_fault; |
| async->is_write = write; |
| async->address = address; |
| return; |
| } |
| } |
| #endif |
| |
| handle_page_fault(regs, fault_num, is_page_fault, address, write); |
| } |
| |
| void do_page_fault(struct pt_regs *regs, int fault_num, |
| unsigned long address, unsigned long write) |
| { |
| __do_page_fault(regs, fault_num, address, write); |
| } |
| |
| #if CHIP_HAS_TILE_DMA() |
| /* |
| * This routine effectively re-issues asynchronous page faults |
| * when we are returning to user space. |
| */ |
| void do_async_page_fault(struct pt_regs *regs) |
| { |
| struct async_tlb *async = ¤t->thread.dma_async_tlb; |
| |
| /* |
| * Clear thread flag early. If we re-interrupt while processing |
| * code here, we will reset it and recall this routine before |
| * returning to user space. |
| */ |
| clear_thread_flag(TIF_ASYNC_TLB); |
| |
| if (async->fault_num) { |
| /* |
| * Clear async->fault_num before calling the page-fault |
| * handler so that if we re-interrupt before returning |
| * from the function we have somewhere to put the |
| * information from the new interrupt. |
| */ |
| int fault_num = async->fault_num; |
| async->fault_num = 0; |
| handle_page_fault(regs, fault_num, async->is_fault, |
| async->address, async->is_write); |
| } |
| } |
| #endif /* CHIP_HAS_TILE_DMA() */ |
| |
| |
| void vmalloc_sync_all(void) |
| { |
| #ifdef __tilegx__ |
| /* Currently all L1 kernel pmd's are static and shared. */ |
| BUILD_BUG_ON(pgd_index(VMALLOC_END - PAGE_SIZE) != |
| pgd_index(VMALLOC_START)); |
| #else |
| /* |
| * Note that races in the updates of insync and start aren't |
| * problematic: insync can only get set bits added, and updates to |
| * start are only improving performance (without affecting correctness |
| * if undone). |
| */ |
| static DECLARE_BITMAP(insync, PTRS_PER_PGD); |
| static unsigned long start = PAGE_OFFSET; |
| unsigned long address; |
| |
| BUILD_BUG_ON(PAGE_OFFSET & ~PGDIR_MASK); |
| for (address = start; address >= PAGE_OFFSET; address += PGDIR_SIZE) { |
| if (!test_bit(pgd_index(address), insync)) { |
| unsigned long flags; |
| struct list_head *pos; |
| |
| spin_lock_irqsave(&pgd_lock, flags); |
| list_for_each(pos, &pgd_list) |
| if (!vmalloc_sync_one(list_to_pgd(pos), |
| address)) { |
| /* Must be at first entry in list. */ |
| BUG_ON(pos != pgd_list.next); |
| break; |
| } |
| spin_unlock_irqrestore(&pgd_lock, flags); |
| if (pos != pgd_list.next) |
| set_bit(pgd_index(address), insync); |
| } |
| if (address == start && test_bit(pgd_index(address), insync)) |
| start = address + PGDIR_SIZE; |
| } |
| #endif |
| } |