| /* |
| * OPAL API definitions. |
| * |
| * Copyright 2011-2015 IBM Corp. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #ifndef __OPAL_API_H |
| #define __OPAL_API_H |
| |
| /****** OPAL APIs ******/ |
| |
| /* Return codes */ |
| #define OPAL_SUCCESS 0 |
| #define OPAL_PARAMETER -1 |
| #define OPAL_BUSY -2 |
| #define OPAL_PARTIAL -3 |
| #define OPAL_CONSTRAINED -4 |
| #define OPAL_CLOSED -5 |
| #define OPAL_HARDWARE -6 |
| #define OPAL_UNSUPPORTED -7 |
| #define OPAL_PERMISSION -8 |
| #define OPAL_NO_MEM -9 |
| #define OPAL_RESOURCE -10 |
| #define OPAL_INTERNAL_ERROR -11 |
| #define OPAL_BUSY_EVENT -12 |
| #define OPAL_HARDWARE_FROZEN -13 |
| #define OPAL_WRONG_STATE -14 |
| #define OPAL_ASYNC_COMPLETION -15 |
| #define OPAL_EMPTY -16 |
| #define OPAL_I2C_TIMEOUT -17 |
| #define OPAL_I2C_INVALID_CMD -18 |
| #define OPAL_I2C_LBUS_PARITY -19 |
| #define OPAL_I2C_BKEND_OVERRUN -20 |
| #define OPAL_I2C_BKEND_ACCESS -21 |
| #define OPAL_I2C_ARBT_LOST -22 |
| #define OPAL_I2C_NACK_RCVD -23 |
| #define OPAL_I2C_STOP_ERR -24 |
| |
| /* API Tokens (in r0) */ |
| #define OPAL_INVALID_CALL -1 |
| #define OPAL_TEST 0 |
| #define OPAL_CONSOLE_WRITE 1 |
| #define OPAL_CONSOLE_READ 2 |
| #define OPAL_RTC_READ 3 |
| #define OPAL_RTC_WRITE 4 |
| #define OPAL_CEC_POWER_DOWN 5 |
| #define OPAL_CEC_REBOOT 6 |
| #define OPAL_READ_NVRAM 7 |
| #define OPAL_WRITE_NVRAM 8 |
| #define OPAL_HANDLE_INTERRUPT 9 |
| #define OPAL_POLL_EVENTS 10 |
| #define OPAL_PCI_SET_HUB_TCE_MEMORY 11 |
| #define OPAL_PCI_SET_PHB_TCE_MEMORY 12 |
| #define OPAL_PCI_CONFIG_READ_BYTE 13 |
| #define OPAL_PCI_CONFIG_READ_HALF_WORD 14 |
| #define OPAL_PCI_CONFIG_READ_WORD 15 |
| #define OPAL_PCI_CONFIG_WRITE_BYTE 16 |
| #define OPAL_PCI_CONFIG_WRITE_HALF_WORD 17 |
| #define OPAL_PCI_CONFIG_WRITE_WORD 18 |
| #define OPAL_SET_XIVE 19 |
| #define OPAL_GET_XIVE 20 |
| #define OPAL_GET_COMPLETION_TOKEN_STATUS 21 /* obsolete */ |
| #define OPAL_REGISTER_OPAL_EXCEPTION_HANDLER 22 |
| #define OPAL_PCI_EEH_FREEZE_STATUS 23 |
| #define OPAL_PCI_SHPC 24 |
| #define OPAL_CONSOLE_WRITE_BUFFER_SPACE 25 |
| #define OPAL_PCI_EEH_FREEZE_CLEAR 26 |
| #define OPAL_PCI_PHB_MMIO_ENABLE 27 |
| #define OPAL_PCI_SET_PHB_MEM_WINDOW 28 |
| #define OPAL_PCI_MAP_PE_MMIO_WINDOW 29 |
| #define OPAL_PCI_SET_PHB_TABLE_MEMORY 30 |
| #define OPAL_PCI_SET_PE 31 |
| #define OPAL_PCI_SET_PELTV 32 |
| #define OPAL_PCI_SET_MVE 33 |
| #define OPAL_PCI_SET_MVE_ENABLE 34 |
| #define OPAL_PCI_GET_XIVE_REISSUE 35 |
| #define OPAL_PCI_SET_XIVE_REISSUE 36 |
| #define OPAL_PCI_SET_XIVE_PE 37 |
| #define OPAL_GET_XIVE_SOURCE 38 |
| #define OPAL_GET_MSI_32 39 |
| #define OPAL_GET_MSI_64 40 |
| #define OPAL_START_CPU 41 |
| #define OPAL_QUERY_CPU_STATUS 42 |
| #define OPAL_WRITE_OPPANEL 43 /* unimplemented */ |
| #define OPAL_PCI_MAP_PE_DMA_WINDOW 44 |
| #define OPAL_PCI_MAP_PE_DMA_WINDOW_REAL 45 |
| #define OPAL_PCI_RESET 49 |
| #define OPAL_PCI_GET_HUB_DIAG_DATA 50 |
| #define OPAL_PCI_GET_PHB_DIAG_DATA 51 |
| #define OPAL_PCI_FENCE_PHB 52 |
| #define OPAL_PCI_REINIT 53 |
| #define OPAL_PCI_MASK_PE_ERROR 54 |
| #define OPAL_SET_SLOT_LED_STATUS 55 |
| #define OPAL_GET_EPOW_STATUS 56 |
| #define OPAL_SET_SYSTEM_ATTENTION_LED 57 |
| #define OPAL_RESERVED1 58 |
| #define OPAL_RESERVED2 59 |
| #define OPAL_PCI_NEXT_ERROR 60 |
| #define OPAL_PCI_EEH_FREEZE_STATUS2 61 |
| #define OPAL_PCI_POLL 62 |
| #define OPAL_PCI_MSI_EOI 63 |
| #define OPAL_PCI_GET_PHB_DIAG_DATA2 64 |
| #define OPAL_XSCOM_READ 65 |
| #define OPAL_XSCOM_WRITE 66 |
| #define OPAL_LPC_READ 67 |
| #define OPAL_LPC_WRITE 68 |
| #define OPAL_RETURN_CPU 69 |
| #define OPAL_REINIT_CPUS 70 |
| #define OPAL_ELOG_READ 71 |
| #define OPAL_ELOG_WRITE 72 |
| #define OPAL_ELOG_ACK 73 |
| #define OPAL_ELOG_RESEND 74 |
| #define OPAL_ELOG_SIZE 75 |
| #define OPAL_FLASH_VALIDATE 76 |
| #define OPAL_FLASH_MANAGE 77 |
| #define OPAL_FLASH_UPDATE 78 |
| #define OPAL_RESYNC_TIMEBASE 79 |
| #define OPAL_CHECK_TOKEN 80 |
| #define OPAL_DUMP_INIT 81 |
| #define OPAL_DUMP_INFO 82 |
| #define OPAL_DUMP_READ 83 |
| #define OPAL_DUMP_ACK 84 |
| #define OPAL_GET_MSG 85 |
| #define OPAL_CHECK_ASYNC_COMPLETION 86 |
| #define OPAL_SYNC_HOST_REBOOT 87 |
| #define OPAL_SENSOR_READ 88 |
| #define OPAL_GET_PARAM 89 |
| #define OPAL_SET_PARAM 90 |
| #define OPAL_DUMP_RESEND 91 |
| #define OPAL_ELOG_SEND 92 /* Deprecated */ |
| #define OPAL_PCI_SET_PHB_CAPI_MODE 93 |
| #define OPAL_DUMP_INFO2 94 |
| #define OPAL_WRITE_OPPANEL_ASYNC 95 |
| #define OPAL_PCI_ERR_INJECT 96 |
| #define OPAL_PCI_EEH_FREEZE_SET 97 |
| #define OPAL_HANDLE_HMI 98 |
| #define OPAL_CONFIG_CPU_IDLE_STATE 99 |
| #define OPAL_SLW_SET_REG 100 |
| #define OPAL_REGISTER_DUMP_REGION 101 |
| #define OPAL_UNREGISTER_DUMP_REGION 102 |
| #define OPAL_WRITE_TPO 103 |
| #define OPAL_READ_TPO 104 |
| #define OPAL_GET_DPO_STATUS 105 |
| #define OPAL_OLD_I2C_REQUEST 106 /* Deprecated */ |
| #define OPAL_IPMI_SEND 107 |
| #define OPAL_IPMI_RECV 108 |
| #define OPAL_I2C_REQUEST 109 |
| #define OPAL_FLASH_READ 110 |
| #define OPAL_FLASH_WRITE 111 |
| #define OPAL_FLASH_ERASE 112 |
| #define OPAL_PRD_MSG 113 |
| #define OPAL_LEDS_GET_INDICATOR 114 |
| #define OPAL_LEDS_SET_INDICATOR 115 |
| #define OPAL_CEC_REBOOT2 116 |
| #define OPAL_CONSOLE_FLUSH 117 |
| #define OPAL_LAST 117 |
| |
| /* Device tree flags */ |
| |
| /* Flags set in power-mgmt nodes in device tree if |
| * respective idle states are supported in the platform. |
| */ |
| #define OPAL_PM_NAP_ENABLED 0x00010000 |
| #define OPAL_PM_SLEEP_ENABLED 0x00020000 |
| #define OPAL_PM_WINKLE_ENABLED 0x00040000 |
| #define OPAL_PM_SLEEP_ENABLED_ER1 0x00080000 /* with workaround */ |
| |
| /* |
| * OPAL_CONFIG_CPU_IDLE_STATE parameters |
| */ |
| #define OPAL_CONFIG_IDLE_FASTSLEEP 1 |
| #define OPAL_CONFIG_IDLE_UNDO 0 |
| #define OPAL_CONFIG_IDLE_APPLY 1 |
| |
| #ifndef __ASSEMBLY__ |
| |
| /* Other enums */ |
| enum OpalFreezeState { |
| OPAL_EEH_STOPPED_NOT_FROZEN = 0, |
| OPAL_EEH_STOPPED_MMIO_FREEZE = 1, |
| OPAL_EEH_STOPPED_DMA_FREEZE = 2, |
| OPAL_EEH_STOPPED_MMIO_DMA_FREEZE = 3, |
| OPAL_EEH_STOPPED_RESET = 4, |
| OPAL_EEH_STOPPED_TEMP_UNAVAIL = 5, |
| OPAL_EEH_STOPPED_PERM_UNAVAIL = 6 |
| }; |
| |
| enum OpalEehFreezeActionToken { |
| OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO = 1, |
| OPAL_EEH_ACTION_CLEAR_FREEZE_DMA = 2, |
| OPAL_EEH_ACTION_CLEAR_FREEZE_ALL = 3, |
| |
| OPAL_EEH_ACTION_SET_FREEZE_MMIO = 1, |
| OPAL_EEH_ACTION_SET_FREEZE_DMA = 2, |
| OPAL_EEH_ACTION_SET_FREEZE_ALL = 3 |
| }; |
| |
| enum OpalPciStatusToken { |
| OPAL_EEH_NO_ERROR = 0, |
| OPAL_EEH_IOC_ERROR = 1, |
| OPAL_EEH_PHB_ERROR = 2, |
| OPAL_EEH_PE_ERROR = 3, |
| OPAL_EEH_PE_MMIO_ERROR = 4, |
| OPAL_EEH_PE_DMA_ERROR = 5 |
| }; |
| |
| enum OpalPciErrorSeverity { |
| OPAL_EEH_SEV_NO_ERROR = 0, |
| OPAL_EEH_SEV_IOC_DEAD = 1, |
| OPAL_EEH_SEV_PHB_DEAD = 2, |
| OPAL_EEH_SEV_PHB_FENCED = 3, |
| OPAL_EEH_SEV_PE_ER = 4, |
| OPAL_EEH_SEV_INF = 5 |
| }; |
| |
| enum OpalErrinjectType { |
| OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR = 0, |
| OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64 = 1, |
| }; |
| |
| enum OpalErrinjectFunc { |
| /* IOA bus specific errors */ |
| OPAL_ERR_INJECT_FUNC_IOA_LD_MEM_ADDR = 0, |
| OPAL_ERR_INJECT_FUNC_IOA_LD_MEM_DATA = 1, |
| OPAL_ERR_INJECT_FUNC_IOA_LD_IO_ADDR = 2, |
| OPAL_ERR_INJECT_FUNC_IOA_LD_IO_DATA = 3, |
| OPAL_ERR_INJECT_FUNC_IOA_LD_CFG_ADDR = 4, |
| OPAL_ERR_INJECT_FUNC_IOA_LD_CFG_DATA = 5, |
| OPAL_ERR_INJECT_FUNC_IOA_ST_MEM_ADDR = 6, |
| OPAL_ERR_INJECT_FUNC_IOA_ST_MEM_DATA = 7, |
| OPAL_ERR_INJECT_FUNC_IOA_ST_IO_ADDR = 8, |
| OPAL_ERR_INJECT_FUNC_IOA_ST_IO_DATA = 9, |
| OPAL_ERR_INJECT_FUNC_IOA_ST_CFG_ADDR = 10, |
| OPAL_ERR_INJECT_FUNC_IOA_ST_CFG_DATA = 11, |
| OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_ADDR = 12, |
| OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_DATA = 13, |
| OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_MASTER = 14, |
| OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_TARGET = 15, |
| OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_ADDR = 16, |
| OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_DATA = 17, |
| OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_MASTER = 18, |
| OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_TARGET = 19, |
| }; |
| |
| enum OpalMmioWindowType { |
| OPAL_M32_WINDOW_TYPE = 1, |
| OPAL_M64_WINDOW_TYPE = 2, |
| OPAL_IO_WINDOW_TYPE = 3 |
| }; |
| |
| enum OpalExceptionHandler { |
| OPAL_MACHINE_CHECK_HANDLER = 1, |
| OPAL_HYPERVISOR_MAINTENANCE_HANDLER = 2, |
| OPAL_SOFTPATCH_HANDLER = 3 |
| }; |
| |
| enum OpalPendingState { |
| OPAL_EVENT_OPAL_INTERNAL = 0x1, |
| OPAL_EVENT_NVRAM = 0x2, |
| OPAL_EVENT_RTC = 0x4, |
| OPAL_EVENT_CONSOLE_OUTPUT = 0x8, |
| OPAL_EVENT_CONSOLE_INPUT = 0x10, |
| OPAL_EVENT_ERROR_LOG_AVAIL = 0x20, |
| OPAL_EVENT_ERROR_LOG = 0x40, |
| OPAL_EVENT_EPOW = 0x80, |
| OPAL_EVENT_LED_STATUS = 0x100, |
| OPAL_EVENT_PCI_ERROR = 0x200, |
| OPAL_EVENT_DUMP_AVAIL = 0x400, |
| OPAL_EVENT_MSG_PENDING = 0x800, |
| }; |
| |
| enum OpalThreadStatus { |
| OPAL_THREAD_INACTIVE = 0x0, |
| OPAL_THREAD_STARTED = 0x1, |
| OPAL_THREAD_UNAVAILABLE = 0x2 /* opal-v3 */ |
| }; |
| |
| enum OpalPciBusCompare { |
| OpalPciBusAny = 0, /* Any bus number match */ |
| OpalPciBus3Bits = 2, /* Match top 3 bits of bus number */ |
| OpalPciBus4Bits = 3, /* Match top 4 bits of bus number */ |
| OpalPciBus5Bits = 4, /* Match top 5 bits of bus number */ |
| OpalPciBus6Bits = 5, /* Match top 6 bits of bus number */ |
| OpalPciBus7Bits = 6, /* Match top 7 bits of bus number */ |
| OpalPciBusAll = 7, /* Match bus number exactly */ |
| }; |
| |
| enum OpalDeviceCompare { |
| OPAL_IGNORE_RID_DEVICE_NUMBER = 0, |
| OPAL_COMPARE_RID_DEVICE_NUMBER = 1 |
| }; |
| |
| enum OpalFuncCompare { |
| OPAL_IGNORE_RID_FUNCTION_NUMBER = 0, |
| OPAL_COMPARE_RID_FUNCTION_NUMBER = 1 |
| }; |
| |
| enum OpalPeAction { |
| OPAL_UNMAP_PE = 0, |
| OPAL_MAP_PE = 1 |
| }; |
| |
| enum OpalPeltvAction { |
| OPAL_REMOVE_PE_FROM_DOMAIN = 0, |
| OPAL_ADD_PE_TO_DOMAIN = 1 |
| }; |
| |
| enum OpalMveEnableAction { |
| OPAL_DISABLE_MVE = 0, |
| OPAL_ENABLE_MVE = 1 |
| }; |
| |
| enum OpalM64Action { |
| OPAL_DISABLE_M64 = 0, |
| OPAL_ENABLE_M64_SPLIT = 1, |
| OPAL_ENABLE_M64_NON_SPLIT = 2 |
| }; |
| |
| enum OpalPciResetScope { |
| OPAL_RESET_PHB_COMPLETE = 1, |
| OPAL_RESET_PCI_LINK = 2, |
| OPAL_RESET_PHB_ERROR = 3, |
| OPAL_RESET_PCI_HOT = 4, |
| OPAL_RESET_PCI_FUNDAMENTAL = 5, |
| OPAL_RESET_PCI_IODA_TABLE = 6 |
| }; |
| |
| enum OpalPciReinitScope { |
| /* |
| * Note: we chose values that do not overlap |
| * OpalPciResetScope as OPAL v2 used the same |
| * enum for both |
| */ |
| OPAL_REINIT_PCI_DEV = 1000 |
| }; |
| |
| enum OpalPciResetState { |
| OPAL_DEASSERT_RESET = 0, |
| OPAL_ASSERT_RESET = 1 |
| }; |
| |
| enum OpalSlotLedType { |
| OPAL_SLOT_LED_TYPE_ID = 0, /* IDENTIFY LED */ |
| OPAL_SLOT_LED_TYPE_FAULT = 1, /* FAULT LED */ |
| OPAL_SLOT_LED_TYPE_ATTN = 2, /* System Attention LED */ |
| OPAL_SLOT_LED_TYPE_MAX = 3 |
| }; |
| |
| enum OpalSlotLedState { |
| OPAL_SLOT_LED_STATE_OFF = 0, /* LED is OFF */ |
| OPAL_SLOT_LED_STATE_ON = 1 /* LED is ON */ |
| }; |
| |
| /* |
| * Address cycle types for LPC accesses. These also correspond |
| * to the content of the first cell of the "reg" property for |
| * device nodes on the LPC bus |
| */ |
| enum OpalLPCAddressType { |
| OPAL_LPC_MEM = 0, |
| OPAL_LPC_IO = 1, |
| OPAL_LPC_FW = 2, |
| }; |
| |
| enum opal_msg_type { |
| OPAL_MSG_ASYNC_COMP = 0, /* params[0] = token, params[1] = rc, |
| * additional params function-specific |
| */ |
| OPAL_MSG_MEM_ERR = 1, |
| OPAL_MSG_EPOW = 2, |
| OPAL_MSG_SHUTDOWN = 3, /* params[0] = 1 reboot, 0 shutdown */ |
| OPAL_MSG_HMI_EVT = 4, |
| OPAL_MSG_DPO = 5, |
| OPAL_MSG_PRD = 6, |
| OPAL_MSG_OCC = 7, |
| OPAL_MSG_TYPE_MAX, |
| }; |
| |
| struct opal_msg { |
| __be32 msg_type; |
| __be32 reserved; |
| __be64 params[8]; |
| }; |
| |
| /* System parameter permission */ |
| enum OpalSysparamPerm { |
| OPAL_SYSPARAM_READ = 0x1, |
| OPAL_SYSPARAM_WRITE = 0x2, |
| OPAL_SYSPARAM_RW = (OPAL_SYSPARAM_READ | OPAL_SYSPARAM_WRITE), |
| }; |
| |
| enum { |
| OPAL_IPMI_MSG_FORMAT_VERSION_1 = 1, |
| }; |
| |
| struct opal_ipmi_msg { |
| uint8_t version; |
| uint8_t netfn; |
| uint8_t cmd; |
| uint8_t data[]; |
| }; |
| |
| /* FSP memory errors handling */ |
| enum OpalMemErr_Version { |
| OpalMemErr_V1 = 1, |
| }; |
| |
| enum OpalMemErrType { |
| OPAL_MEM_ERR_TYPE_RESILIENCE = 0, |
| OPAL_MEM_ERR_TYPE_DYN_DALLOC, |
| }; |
| |
| /* Memory Reilience error type */ |
| enum OpalMemErr_ResilErrType { |
| OPAL_MEM_RESILIENCE_CE = 0, |
| OPAL_MEM_RESILIENCE_UE, |
| OPAL_MEM_RESILIENCE_UE_SCRUB, |
| }; |
| |
| /* Dynamic Memory Deallocation type */ |
| enum OpalMemErr_DynErrType { |
| OPAL_MEM_DYNAMIC_DEALLOC = 0, |
| }; |
| |
| struct OpalMemoryErrorData { |
| enum OpalMemErr_Version version:8; /* 0x00 */ |
| enum OpalMemErrType type:8; /* 0x01 */ |
| __be16 flags; /* 0x02 */ |
| uint8_t reserved_1[4]; /* 0x04 */ |
| |
| union { |
| /* Memory Resilience corrected/uncorrected error info */ |
| struct { |
| enum OpalMemErr_ResilErrType resil_err_type:8; |
| uint8_t reserved_1[7]; |
| __be64 physical_address_start; |
| __be64 physical_address_end; |
| } resilience; |
| /* Dynamic memory deallocation error info */ |
| struct { |
| enum OpalMemErr_DynErrType dyn_err_type:8; |
| uint8_t reserved_1[7]; |
| __be64 physical_address_start; |
| __be64 physical_address_end; |
| } dyn_dealloc; |
| } u; |
| }; |
| |
| /* HMI interrupt event */ |
| enum OpalHMI_Version { |
| OpalHMIEvt_V1 = 1, |
| OpalHMIEvt_V2 = 2, |
| }; |
| |
| enum OpalHMI_Severity { |
| OpalHMI_SEV_NO_ERROR = 0, |
| OpalHMI_SEV_WARNING = 1, |
| OpalHMI_SEV_ERROR_SYNC = 2, |
| OpalHMI_SEV_FATAL = 3, |
| }; |
| |
| enum OpalHMI_Disposition { |
| OpalHMI_DISPOSITION_RECOVERED = 0, |
| OpalHMI_DISPOSITION_NOT_RECOVERED = 1, |
| }; |
| |
| enum OpalHMI_ErrType { |
| OpalHMI_ERROR_MALFUNC_ALERT = 0, |
| OpalHMI_ERROR_PROC_RECOV_DONE, |
| OpalHMI_ERROR_PROC_RECOV_DONE_AGAIN, |
| OpalHMI_ERROR_PROC_RECOV_MASKED, |
| OpalHMI_ERROR_TFAC, |
| OpalHMI_ERROR_TFMR_PARITY, |
| OpalHMI_ERROR_HA_OVERFLOW_WARN, |
| OpalHMI_ERROR_XSCOM_FAIL, |
| OpalHMI_ERROR_XSCOM_DONE, |
| OpalHMI_ERROR_SCOM_FIR, |
| OpalHMI_ERROR_DEBUG_TRIG_FIR, |
| OpalHMI_ERROR_HYP_RESOURCE, |
| OpalHMI_ERROR_CAPP_RECOVERY, |
| }; |
| |
| enum OpalHMI_XstopType { |
| CHECKSTOP_TYPE_UNKNOWN = 0, |
| CHECKSTOP_TYPE_CORE = 1, |
| CHECKSTOP_TYPE_NX = 2, |
| }; |
| |
| enum OpalHMI_CoreXstopReason { |
| CORE_CHECKSTOP_IFU_REGFILE = 0x00000001, |
| CORE_CHECKSTOP_IFU_LOGIC = 0x00000002, |
| CORE_CHECKSTOP_PC_DURING_RECOV = 0x00000004, |
| CORE_CHECKSTOP_ISU_REGFILE = 0x00000008, |
| CORE_CHECKSTOP_ISU_LOGIC = 0x00000010, |
| CORE_CHECKSTOP_FXU_LOGIC = 0x00000020, |
| CORE_CHECKSTOP_VSU_LOGIC = 0x00000040, |
| CORE_CHECKSTOP_PC_RECOV_IN_MAINT_MODE = 0x00000080, |
| CORE_CHECKSTOP_LSU_REGFILE = 0x00000100, |
| CORE_CHECKSTOP_PC_FWD_PROGRESS = 0x00000200, |
| CORE_CHECKSTOP_LSU_LOGIC = 0x00000400, |
| CORE_CHECKSTOP_PC_LOGIC = 0x00000800, |
| CORE_CHECKSTOP_PC_HYP_RESOURCE = 0x00001000, |
| CORE_CHECKSTOP_PC_HANG_RECOV_FAILED = 0x00002000, |
| CORE_CHECKSTOP_PC_AMBI_HANG_DETECTED = 0x00004000, |
| CORE_CHECKSTOP_PC_DEBUG_TRIG_ERR_INJ = 0x00008000, |
| CORE_CHECKSTOP_PC_SPRD_HYP_ERR_INJ = 0x00010000, |
| }; |
| |
| enum OpalHMI_NestAccelXstopReason { |
| NX_CHECKSTOP_SHM_INVAL_STATE_ERR = 0x00000001, |
| NX_CHECKSTOP_DMA_INVAL_STATE_ERR_1 = 0x00000002, |
| NX_CHECKSTOP_DMA_INVAL_STATE_ERR_2 = 0x00000004, |
| NX_CHECKSTOP_DMA_CH0_INVAL_STATE_ERR = 0x00000008, |
| NX_CHECKSTOP_DMA_CH1_INVAL_STATE_ERR = 0x00000010, |
| NX_CHECKSTOP_DMA_CH2_INVAL_STATE_ERR = 0x00000020, |
| NX_CHECKSTOP_DMA_CH3_INVAL_STATE_ERR = 0x00000040, |
| NX_CHECKSTOP_DMA_CH4_INVAL_STATE_ERR = 0x00000080, |
| NX_CHECKSTOP_DMA_CH5_INVAL_STATE_ERR = 0x00000100, |
| NX_CHECKSTOP_DMA_CH6_INVAL_STATE_ERR = 0x00000200, |
| NX_CHECKSTOP_DMA_CH7_INVAL_STATE_ERR = 0x00000400, |
| NX_CHECKSTOP_DMA_CRB_UE = 0x00000800, |
| NX_CHECKSTOP_DMA_CRB_SUE = 0x00001000, |
| NX_CHECKSTOP_PBI_ISN_UE = 0x00002000, |
| }; |
| |
| struct OpalHMIEvent { |
| uint8_t version; /* 0x00 */ |
| uint8_t severity; /* 0x01 */ |
| uint8_t type; /* 0x02 */ |
| uint8_t disposition; /* 0x03 */ |
| uint8_t reserved_1[4]; /* 0x04 */ |
| |
| __be64 hmer; |
| /* TFMR register. Valid only for TFAC and TFMR_PARITY error type. */ |
| __be64 tfmr; |
| |
| /* version 2 and later */ |
| union { |
| /* |
| * checkstop info (Core/NX). |
| * Valid for OpalHMI_ERROR_MALFUNC_ALERT. |
| */ |
| struct { |
| uint8_t xstop_type; /* enum OpalHMI_XstopType */ |
| uint8_t reserved_1[3]; |
| __be32 xstop_reason; |
| union { |
| __be32 pir; /* for CHECKSTOP_TYPE_CORE */ |
| __be32 chip_id; /* for CHECKSTOP_TYPE_NX */ |
| } u; |
| } xstop_error; |
| } u; |
| }; |
| |
| enum { |
| OPAL_P7IOC_DIAG_TYPE_NONE = 0, |
| OPAL_P7IOC_DIAG_TYPE_RGC = 1, |
| OPAL_P7IOC_DIAG_TYPE_BI = 2, |
| OPAL_P7IOC_DIAG_TYPE_CI = 3, |
| OPAL_P7IOC_DIAG_TYPE_MISC = 4, |
| OPAL_P7IOC_DIAG_TYPE_I2C = 5, |
| OPAL_P7IOC_DIAG_TYPE_LAST = 6 |
| }; |
| |
| struct OpalIoP7IOCErrorData { |
| __be16 type; |
| |
| /* GEM */ |
| __be64 gemXfir; |
| __be64 gemRfir; |
| __be64 gemRirqfir; |
| __be64 gemMask; |
| __be64 gemRwof; |
| |
| /* LEM */ |
| __be64 lemFir; |
| __be64 lemErrMask; |
| __be64 lemAction0; |
| __be64 lemAction1; |
| __be64 lemWof; |
| |
| union { |
| struct OpalIoP7IOCRgcErrorData { |
| __be64 rgcStatus; /* 3E1C10 */ |
| __be64 rgcLdcp; /* 3E1C18 */ |
| }rgc; |
| struct OpalIoP7IOCBiErrorData { |
| __be64 biLdcp0; /* 3C0100, 3C0118 */ |
| __be64 biLdcp1; /* 3C0108, 3C0120 */ |
| __be64 biLdcp2; /* 3C0110, 3C0128 */ |
| __be64 biFenceStatus; /* 3C0130, 3C0130 */ |
| |
| uint8_t biDownbound; /* BI Downbound or Upbound */ |
| }bi; |
| struct OpalIoP7IOCCiErrorData { |
| __be64 ciPortStatus; /* 3Dn008 */ |
| __be64 ciPortLdcp; /* 3Dn010 */ |
| |
| uint8_t ciPort; /* Index of CI port: 0/1 */ |
| }ci; |
| }; |
| }; |
| |
| /** |
| * This structure defines the overlay which will be used to store PHB error |
| * data upon request. |
| */ |
| enum { |
| OPAL_PHB_ERROR_DATA_VERSION_1 = 1, |
| }; |
| |
| enum { |
| OPAL_PHB_ERROR_DATA_TYPE_P7IOC = 1, |
| OPAL_PHB_ERROR_DATA_TYPE_PHB3 = 2 |
| }; |
| |
| enum { |
| OPAL_P7IOC_NUM_PEST_REGS = 128, |
| OPAL_PHB3_NUM_PEST_REGS = 256 |
| }; |
| |
| struct OpalIoPhbErrorCommon { |
| __be32 version; |
| __be32 ioType; |
| __be32 len; |
| }; |
| |
| struct OpalIoP7IOCPhbErrorData { |
| struct OpalIoPhbErrorCommon common; |
| |
| __be32 brdgCtl; |
| |
| // P7IOC utl regs |
| __be32 portStatusReg; |
| __be32 rootCmplxStatus; |
| __be32 busAgentStatus; |
| |
| // P7IOC cfg regs |
| __be32 deviceStatus; |
| __be32 slotStatus; |
| __be32 linkStatus; |
| __be32 devCmdStatus; |
| __be32 devSecStatus; |
| |
| // cfg AER regs |
| __be32 rootErrorStatus; |
| __be32 uncorrErrorStatus; |
| __be32 corrErrorStatus; |
| __be32 tlpHdr1; |
| __be32 tlpHdr2; |
| __be32 tlpHdr3; |
| __be32 tlpHdr4; |
| __be32 sourceId; |
| |
| __be32 rsv3; |
| |
| // Record data about the call to allocate a buffer. |
| __be64 errorClass; |
| __be64 correlator; |
| |
| //P7IOC MMIO Error Regs |
| __be64 p7iocPlssr; // n120 |
| __be64 p7iocCsr; // n110 |
| __be64 lemFir; // nC00 |
| __be64 lemErrorMask; // nC18 |
| __be64 lemWOF; // nC40 |
| __be64 phbErrorStatus; // nC80 |
| __be64 phbFirstErrorStatus; // nC88 |
| __be64 phbErrorLog0; // nCC0 |
| __be64 phbErrorLog1; // nCC8 |
| __be64 mmioErrorStatus; // nD00 |
| __be64 mmioFirstErrorStatus; // nD08 |
| __be64 mmioErrorLog0; // nD40 |
| __be64 mmioErrorLog1; // nD48 |
| __be64 dma0ErrorStatus; // nD80 |
| __be64 dma0FirstErrorStatus; // nD88 |
| __be64 dma0ErrorLog0; // nDC0 |
| __be64 dma0ErrorLog1; // nDC8 |
| __be64 dma1ErrorStatus; // nE00 |
| __be64 dma1FirstErrorStatus; // nE08 |
| __be64 dma1ErrorLog0; // nE40 |
| __be64 dma1ErrorLog1; // nE48 |
| __be64 pestA[OPAL_P7IOC_NUM_PEST_REGS]; |
| __be64 pestB[OPAL_P7IOC_NUM_PEST_REGS]; |
| }; |
| |
| struct OpalIoPhb3ErrorData { |
| struct OpalIoPhbErrorCommon common; |
| |
| __be32 brdgCtl; |
| |
| /* PHB3 UTL regs */ |
| __be32 portStatusReg; |
| __be32 rootCmplxStatus; |
| __be32 busAgentStatus; |
| |
| /* PHB3 cfg regs */ |
| __be32 deviceStatus; |
| __be32 slotStatus; |
| __be32 linkStatus; |
| __be32 devCmdStatus; |
| __be32 devSecStatus; |
| |
| /* cfg AER regs */ |
| __be32 rootErrorStatus; |
| __be32 uncorrErrorStatus; |
| __be32 corrErrorStatus; |
| __be32 tlpHdr1; |
| __be32 tlpHdr2; |
| __be32 tlpHdr3; |
| __be32 tlpHdr4; |
| __be32 sourceId; |
| |
| __be32 rsv3; |
| |
| /* Record data about the call to allocate a buffer */ |
| __be64 errorClass; |
| __be64 correlator; |
| |
| /* PHB3 MMIO Error Regs */ |
| __be64 nFir; /* 000 */ |
| __be64 nFirMask; /* 003 */ |
| __be64 nFirWOF; /* 008 */ |
| __be64 phbPlssr; /* 120 */ |
| __be64 phbCsr; /* 110 */ |
| __be64 lemFir; /* C00 */ |
| __be64 lemErrorMask; /* C18 */ |
| __be64 lemWOF; /* C40 */ |
| __be64 phbErrorStatus; /* C80 */ |
| __be64 phbFirstErrorStatus; /* C88 */ |
| __be64 phbErrorLog0; /* CC0 */ |
| __be64 phbErrorLog1; /* CC8 */ |
| __be64 mmioErrorStatus; /* D00 */ |
| __be64 mmioFirstErrorStatus; /* D08 */ |
| __be64 mmioErrorLog0; /* D40 */ |
| __be64 mmioErrorLog1; /* D48 */ |
| __be64 dma0ErrorStatus; /* D80 */ |
| __be64 dma0FirstErrorStatus; /* D88 */ |
| __be64 dma0ErrorLog0; /* DC0 */ |
| __be64 dma0ErrorLog1; /* DC8 */ |
| __be64 dma1ErrorStatus; /* E00 */ |
| __be64 dma1FirstErrorStatus; /* E08 */ |
| __be64 dma1ErrorLog0; /* E40 */ |
| __be64 dma1ErrorLog1; /* E48 */ |
| __be64 pestA[OPAL_PHB3_NUM_PEST_REGS]; |
| __be64 pestB[OPAL_PHB3_NUM_PEST_REGS]; |
| }; |
| |
| enum { |
| OPAL_REINIT_CPUS_HILE_BE = (1 << 0), |
| OPAL_REINIT_CPUS_HILE_LE = (1 << 1), |
| }; |
| |
| typedef struct oppanel_line { |
| __be64 line; |
| __be64 line_len; |
| } oppanel_line_t; |
| |
| enum opal_prd_msg_type { |
| OPAL_PRD_MSG_TYPE_INIT = 0, /* HBRT --> OPAL */ |
| OPAL_PRD_MSG_TYPE_FINI, /* HBRT/kernel --> OPAL */ |
| OPAL_PRD_MSG_TYPE_ATTN, /* HBRT <-- OPAL */ |
| OPAL_PRD_MSG_TYPE_ATTN_ACK, /* HBRT --> OPAL */ |
| OPAL_PRD_MSG_TYPE_OCC_ERROR, /* HBRT <-- OPAL */ |
| OPAL_PRD_MSG_TYPE_OCC_RESET, /* HBRT <-- OPAL */ |
| }; |
| |
| struct opal_prd_msg_header { |
| uint8_t type; |
| uint8_t pad[1]; |
| __be16 size; |
| }; |
| |
| struct opal_prd_msg; |
| |
| #define OCC_RESET 0 |
| #define OCC_LOAD 1 |
| #define OCC_THROTTLE 2 |
| #define OCC_MAX_THROTTLE_STATUS 5 |
| |
| struct opal_occ_msg { |
| __be64 type; |
| __be64 chip; |
| __be64 throttle_status; |
| }; |
| |
| /* |
| * SG entries |
| * |
| * WARNING: The current implementation requires each entry |
| * to represent a block that is 4k aligned *and* each block |
| * size except the last one in the list to be as well. |
| */ |
| struct opal_sg_entry { |
| __be64 data; |
| __be64 length; |
| }; |
| |
| /* |
| * Candiate image SG list. |
| * |
| * length = VER | length |
| */ |
| struct opal_sg_list { |
| __be64 length; |
| __be64 next; |
| struct opal_sg_entry entry[]; |
| }; |
| |
| /* |
| * Dump region ID range usable by the OS |
| */ |
| #define OPAL_DUMP_REGION_HOST_START 0x80 |
| #define OPAL_DUMP_REGION_LOG_BUF 0x80 |
| #define OPAL_DUMP_REGION_HOST_END 0xFF |
| |
| /* CAPI modes for PHB */ |
| enum { |
| OPAL_PHB_CAPI_MODE_PCIE = 0, |
| OPAL_PHB_CAPI_MODE_CAPI = 1, |
| OPAL_PHB_CAPI_MODE_SNOOP_OFF = 2, |
| OPAL_PHB_CAPI_MODE_SNOOP_ON = 3, |
| }; |
| |
| /* OPAL I2C request */ |
| struct opal_i2c_request { |
| uint8_t type; |
| #define OPAL_I2C_RAW_READ 0 |
| #define OPAL_I2C_RAW_WRITE 1 |
| #define OPAL_I2C_SM_READ 2 |
| #define OPAL_I2C_SM_WRITE 3 |
| uint8_t flags; |
| #define OPAL_I2C_ADDR_10 0x01 /* Not supported yet */ |
| uint8_t subaddr_sz; /* Max 4 */ |
| uint8_t reserved; |
| __be16 addr; /* 7 or 10 bit address */ |
| __be16 reserved2; |
| __be32 subaddr; /* Sub-address if any */ |
| __be32 size; /* Data size */ |
| __be64 buffer_ra; /* Buffer real address */ |
| }; |
| |
| /* |
| * EPOW status sharing (OPAL and the host) |
| * |
| * The host will pass on OPAL, a buffer of length OPAL_SYSEPOW_MAX |
| * with individual elements being 16 bits wide to fetch the system |
| * wide EPOW status. Each element in the buffer will contain the |
| * EPOW status in it's bit representation for a particular EPOW sub |
| * class as defiend here. So multiple detailed EPOW status bits |
| * specific for any sub class can be represented in a single buffer |
| * element as it's bit representation. |
| */ |
| |
| /* System EPOW type */ |
| enum OpalSysEpow { |
| OPAL_SYSEPOW_POWER = 0, /* Power EPOW */ |
| OPAL_SYSEPOW_TEMP = 1, /* Temperature EPOW */ |
| OPAL_SYSEPOW_COOLING = 2, /* Cooling EPOW */ |
| OPAL_SYSEPOW_MAX = 3, /* Max EPOW categories */ |
| }; |
| |
| /* Power EPOW */ |
| enum OpalSysPower { |
| OPAL_SYSPOWER_UPS = 0x0001, /* System on UPS power */ |
| OPAL_SYSPOWER_CHNG = 0x0002, /* System power config change */ |
| OPAL_SYSPOWER_FAIL = 0x0004, /* System impending power failure */ |
| OPAL_SYSPOWER_INCL = 0x0008, /* System incomplete power */ |
| }; |
| |
| /* Temperature EPOW */ |
| enum OpalSysTemp { |
| OPAL_SYSTEMP_AMB = 0x0001, /* System over ambient temperature */ |
| OPAL_SYSTEMP_INT = 0x0002, /* System over internal temperature */ |
| OPAL_SYSTEMP_HMD = 0x0004, /* System over ambient humidity */ |
| }; |
| |
| /* Cooling EPOW */ |
| enum OpalSysCooling { |
| OPAL_SYSCOOL_INSF = 0x0001, /* System insufficient cooling */ |
| }; |
| |
| /* Argument to OPAL_CEC_REBOOT2() */ |
| enum { |
| OPAL_REBOOT_NORMAL = 0, |
| OPAL_REBOOT_PLATFORM_ERROR = 1, |
| }; |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| #endif /* __OPAL_API_H */ |