| /* |
| * Samsung MHL interface driver |
| * |
| * Copyright (C) 2011 Samsung Electronics Co.Ltd |
| * Author: Tomasz Stanislawski <t.stanislaws@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/freezer.h> |
| #include <linux/gpio.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/kthread.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/slab.h> |
| |
| #include <linux/platform_data/media/sii9234.h> |
| #include <media/v4l2-subdev.h> |
| |
| MODULE_AUTHOR("Tomasz Stanislawski <t.stanislaws@samsung.com>"); |
| MODULE_DESCRIPTION("Samsung MHL interface driver"); |
| MODULE_LICENSE("GPL"); |
| |
| struct sii9234_context { |
| struct i2c_client *client; |
| struct regulator *power; |
| int gpio_n_reset; |
| struct v4l2_subdev sd; |
| }; |
| |
| static inline struct sii9234_context *sd_to_context(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct sii9234_context, sd); |
| } |
| |
| static inline int sii9234_readb(struct i2c_client *client, int addr) |
| { |
| return i2c_smbus_read_byte_data(client, addr); |
| } |
| |
| static inline int sii9234_writeb(struct i2c_client *client, int addr, int value) |
| { |
| return i2c_smbus_write_byte_data(client, addr, value); |
| } |
| |
| static inline int sii9234_writeb_mask(struct i2c_client *client, int addr, |
| int value, int mask) |
| { |
| int ret; |
| |
| ret = i2c_smbus_read_byte_data(client, addr); |
| if (ret < 0) |
| return ret; |
| ret = (ret & ~mask) | (value & mask); |
| return i2c_smbus_write_byte_data(client, addr, ret); |
| } |
| |
| static inline int sii9234_readb_idx(struct i2c_client *client, int addr) |
| { |
| int ret; |
| ret = i2c_smbus_write_byte_data(client, 0xbc, addr >> 8); |
| if (ret < 0) |
| return ret; |
| ret = i2c_smbus_write_byte_data(client, 0xbd, addr & 0xff); |
| if (ret < 0) |
| return ret; |
| return i2c_smbus_read_byte_data(client, 0xbe); |
| } |
| |
| static inline int sii9234_writeb_idx(struct i2c_client *client, int addr, |
| int value) |
| { |
| int ret; |
| ret = i2c_smbus_write_byte_data(client, 0xbc, addr >> 8); |
| if (ret < 0) |
| return ret; |
| ret = i2c_smbus_write_byte_data(client, 0xbd, addr & 0xff); |
| if (ret < 0) |
| return ret; |
| ret = i2c_smbus_write_byte_data(client, 0xbe, value); |
| return ret; |
| } |
| |
| static inline int sii9234_writeb_idx_mask(struct i2c_client *client, int addr, |
| int value, int mask) |
| { |
| int ret; |
| |
| ret = sii9234_readb_idx(client, addr); |
| if (ret < 0) |
| return ret; |
| ret = (ret & ~mask) | (value & mask); |
| return sii9234_writeb_idx(client, addr, ret); |
| } |
| |
| static int sii9234_reset(struct sii9234_context *ctx) |
| { |
| struct i2c_client *client = ctx->client; |
| struct device *dev = &client->dev; |
| int ret, tries; |
| |
| gpio_direction_output(ctx->gpio_n_reset, 1); |
| mdelay(1); |
| gpio_direction_output(ctx->gpio_n_reset, 0); |
| mdelay(1); |
| gpio_direction_output(ctx->gpio_n_reset, 1); |
| mdelay(1); |
| |
| /* going to TTPI mode */ |
| ret = sii9234_writeb(client, 0xc7, 0); |
| if (ret < 0) { |
| dev_err(dev, "failed to set TTPI mode\n"); |
| return ret; |
| } |
| for (tries = 0; tries < 100 ; ++tries) { |
| ret = sii9234_readb(client, 0x1b); |
| if (ret > 0) |
| break; |
| if (ret < 0) { |
| dev_err(dev, "failed to reset device\n"); |
| return -EIO; |
| } |
| mdelay(1); |
| } |
| if (tries == 100) { |
| dev_err(dev, "maximal number of tries reached\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int sii9234_verify_version(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| int family, rev, tpi_rev, dev_id, sub_id, hdcp, id; |
| |
| family = sii9234_readb(client, 0x1b); |
| rev = sii9234_readb(client, 0x1c) & 0x0f; |
| tpi_rev = sii9234_readb(client, 0x1d) & 0x7f; |
| dev_id = sii9234_readb_idx(client, 0x0103); |
| sub_id = sii9234_readb_idx(client, 0x0102); |
| hdcp = sii9234_readb(client, 0x30); |
| |
| if (family < 0 || rev < 0 || tpi_rev < 0 || dev_id < 0 || |
| sub_id < 0 || hdcp < 0) { |
| dev_err(dev, "failed to read chip's version\n"); |
| return -EIO; |
| } |
| |
| id = (dev_id << 8) | sub_id; |
| |
| dev_info(dev, "chip: SiL%02x family: %02x, rev: %02x\n", |
| id, family, rev); |
| dev_info(dev, "tpi_rev:%02x, hdcp: %02x\n", tpi_rev, hdcp); |
| if (id != 0x9234) { |
| dev_err(dev, "not supported chip\n"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static u8 data[][3] = { |
| /* setup from driver created by doonsoo45.kim */ |
| { 0x01, 0x05, 0x04 }, /* Enable Auto soft reset on SCDT = 0 */ |
| { 0x01, 0x08, 0x35 }, /* Power Up TMDS Tx Core */ |
| { 0x01, 0x0d, 0x1c }, /* HDMI Transcode mode enable */ |
| { 0x01, 0x2b, 0x01 }, /* Enable HDCP Compliance workaround */ |
| { 0x01, 0x79, 0x40 }, /* daniel test...MHL_INT */ |
| { 0x01, 0x80, 0x34 }, /* Enable Rx PLL Clock Value */ |
| { 0x01, 0x90, 0x27 }, /* Enable CBUS discovery */ |
| { 0x01, 0x91, 0xe5 }, /* Skip RGND detection */ |
| { 0x01, 0x92, 0x46 }, /* Force MHD mode */ |
| { 0x01, 0x93, 0xdc }, /* Disable CBUS pull-up during RGND measurement */ |
| { 0x01, 0x94, 0x66 }, /* 1.8V CBUS VTH & GND threshold */ |
| { 0x01, 0x95, 0x31 }, /* RGND block & single discovery attempt */ |
| { 0x01, 0x96, 0x22 }, /* use 1K and 2K setting */ |
| { 0x01, 0xa0, 0x10 }, /* SIMG: Term mode */ |
| { 0x01, 0xa1, 0xfc }, /* Disable internal Mobile HD driver */ |
| { 0x01, 0xa3, 0xfa }, /* SIMG: Output Swing default EB, 3x Clk Mult */ |
| { 0x01, 0xa5, 0x80 }, /* SIMG: RGND Hysterisis, 3x mode for Beast */ |
| { 0x01, 0xa6, 0x0c }, /* SIMG: Swing Offset */ |
| { 0x02, 0x3d, 0x3f }, /* Power up CVCC 1.2V core */ |
| { 0x03, 0x00, 0x00 }, /* SIMG: correcting HW default */ |
| { 0x03, 0x11, 0x01 }, /* Enable TxPLL Clock */ |
| { 0x03, 0x12, 0x15 }, /* Enable Tx Clock Path & Equalizer */ |
| { 0x03, 0x13, 0x60 }, /* SIMG: Set termination value */ |
| { 0x03, 0x14, 0xf0 }, /* SIMG: Change CKDT level */ |
| { 0x03, 0x17, 0x07 }, /* SIMG: PLL Calrefsel */ |
| { 0x03, 0x1a, 0x20 }, /* VCO Cal */ |
| { 0x03, 0x22, 0xe0 }, /* SIMG: Auto EQ */ |
| { 0x03, 0x23, 0xc0 }, /* SIMG: Auto EQ */ |
| { 0x03, 0x24, 0xa0 }, /* SIMG: Auto EQ */ |
| { 0x03, 0x25, 0x80 }, /* SIMG: Auto EQ */ |
| { 0x03, 0x26, 0x60 }, /* SIMG: Auto EQ */ |
| { 0x03, 0x27, 0x40 }, /* SIMG: Auto EQ */ |
| { 0x03, 0x28, 0x20 }, /* SIMG: Auto EQ */ |
| { 0x03, 0x29, 0x00 }, /* SIMG: Auto EQ */ |
| { 0x03, 0x31, 0x0b }, /* SIMG: Rx PLL BW value from I2C BW ~ 4MHz */ |
| { 0x03, 0x45, 0x06 }, /* SIMG: DPLL Mode */ |
| { 0x03, 0x4b, 0x06 }, /* SIMG: Correcting HW default */ |
| { 0x03, 0x4c, 0xa0 }, /* Manual zone control */ |
| { 0x03, 0x4d, 0x02 }, /* SIMG: PLL Mode Value (order is important) */ |
| }; |
| |
| static int sii9234_set_internal(struct sii9234_context *ctx) |
| { |
| struct i2c_client *client = ctx->client; |
| int i, ret; |
| |
| for (i = 0; i < ARRAY_SIZE(data); ++i) { |
| int addr = (data[i][0] << 8) | data[i][1]; |
| ret = sii9234_writeb_idx(client, addr, data[i][2]); |
| if (ret < 0) |
| return ret; |
| } |
| return 0; |
| } |
| |
| static int sii9234_runtime_suspend(struct device *dev) |
| { |
| struct v4l2_subdev *sd = dev_get_drvdata(dev); |
| struct sii9234_context *ctx = sd_to_context(sd); |
| struct i2c_client *client = ctx->client; |
| |
| dev_info(dev, "suspend start\n"); |
| |
| sii9234_writeb_mask(client, 0x1e, 3, 3); |
| regulator_disable(ctx->power); |
| |
| return 0; |
| } |
| |
| static int sii9234_runtime_resume(struct device *dev) |
| { |
| struct v4l2_subdev *sd = dev_get_drvdata(dev); |
| struct sii9234_context *ctx = sd_to_context(sd); |
| struct i2c_client *client = ctx->client; |
| int ret; |
| |
| dev_info(dev, "resume start\n"); |
| ret = regulator_enable(ctx->power); |
| if (ret < 0) |
| return ret; |
| |
| ret = sii9234_reset(ctx); |
| if (ret) |
| goto fail; |
| |
| /* enable tpi */ |
| ret = sii9234_writeb_mask(client, 0x1e, 1, 0); |
| if (ret < 0) |
| goto fail; |
| ret = sii9234_set_internal(ctx); |
| if (ret < 0) |
| goto fail; |
| |
| return 0; |
| |
| fail: |
| dev_err(dev, "failed to resume\n"); |
| regulator_disable(ctx->power); |
| |
| return ret; |
| } |
| |
| static const struct dev_pm_ops sii9234_pm_ops = { |
| .runtime_suspend = sii9234_runtime_suspend, |
| .runtime_resume = sii9234_runtime_resume, |
| }; |
| |
| static int sii9234_s_power(struct v4l2_subdev *sd, int on) |
| { |
| struct sii9234_context *ctx = sd_to_context(sd); |
| int ret; |
| |
| if (on) |
| ret = pm_runtime_get_sync(&ctx->client->dev); |
| else |
| ret = pm_runtime_put(&ctx->client->dev); |
| /* only values < 0 indicate errors */ |
| return ret < 0 ? ret : 0; |
| } |
| |
| static int sii9234_s_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct sii9234_context *ctx = sd_to_context(sd); |
| |
| /* (dis/en)able TDMS output */ |
| sii9234_writeb_mask(ctx->client, 0x1a, enable ? 0 : ~0 , 1 << 4); |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_core_ops sii9234_core_ops = { |
| .s_power = sii9234_s_power, |
| }; |
| |
| static const struct v4l2_subdev_video_ops sii9234_video_ops = { |
| .s_stream = sii9234_s_stream, |
| }; |
| |
| static const struct v4l2_subdev_ops sii9234_ops = { |
| .core = &sii9234_core_ops, |
| .video = &sii9234_video_ops, |
| }; |
| |
| static int sii9234_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct device *dev = &client->dev; |
| struct sii9234_platform_data *pdata = dev->platform_data; |
| struct sii9234_context *ctx; |
| int ret; |
| |
| ctx = devm_kzalloc(&client->dev, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) { |
| dev_err(dev, "out of memory\n"); |
| ret = -ENOMEM; |
| goto fail; |
| } |
| ctx->client = client; |
| |
| ctx->power = devm_regulator_get(dev, "hdmi-en"); |
| if (IS_ERR(ctx->power)) { |
| dev_err(dev, "failed to acquire regulator hdmi-en\n"); |
| return PTR_ERR(ctx->power); |
| } |
| |
| ctx->gpio_n_reset = pdata->gpio_n_reset; |
| ret = devm_gpio_request(dev, ctx->gpio_n_reset, "MHL_RST"); |
| if (ret) { |
| dev_err(dev, "failed to acquire MHL_RST gpio\n"); |
| return ret; |
| } |
| |
| v4l2_i2c_subdev_init(&ctx->sd, client, &sii9234_ops); |
| |
| pm_runtime_enable(dev); |
| |
| /* enable device */ |
| ret = pm_runtime_get_sync(dev); |
| if (ret) |
| goto fail_pm; |
| |
| /* verify chip version */ |
| ret = sii9234_verify_version(client); |
| if (ret) |
| goto fail_pm_get; |
| |
| /* stop processing */ |
| pm_runtime_put(dev); |
| |
| dev_info(dev, "probe successful\n"); |
| |
| return 0; |
| |
| fail_pm_get: |
| pm_runtime_put_sync(dev); |
| |
| fail_pm: |
| pm_runtime_disable(dev); |
| |
| fail: |
| dev_err(dev, "probe failed\n"); |
| |
| return ret; |
| } |
| |
| static int sii9234_remove(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| |
| pm_runtime_disable(dev); |
| |
| dev_info(dev, "remove successful\n"); |
| |
| return 0; |
| } |
| |
| |
| static const struct i2c_device_id sii9234_id[] = { |
| { "SII9234", 0 }, |
| { }, |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, sii9234_id); |
| static struct i2c_driver sii9234_driver = { |
| .driver = { |
| .name = "sii9234", |
| .pm = &sii9234_pm_ops, |
| }, |
| .probe = sii9234_probe, |
| .remove = sii9234_remove, |
| .id_table = sii9234_id, |
| }; |
| |
| module_i2c_driver(sii9234_driver); |