| /* |
| * CS2000 -- CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier |
| * |
| * Copyright (C) 2015 Renesas Electronics Corporation |
| * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/clk-provider.h> |
| #include <linux/delay.h> |
| #include <linux/clk.h> |
| #include <linux/i2c.h> |
| #include <linux/of_device.h> |
| #include <linux/module.h> |
| |
| #define CH_MAX 4 |
| #define RATIO_REG_SIZE 4 |
| |
| #define DEVICE_ID 0x1 |
| #define DEVICE_CTRL 0x2 |
| #define DEVICE_CFG1 0x3 |
| #define DEVICE_CFG2 0x4 |
| #define GLOBAL_CFG 0x5 |
| #define Ratio_Add(x, nth) (6 + (x * 4) + (nth)) |
| #define Ratio_Val(x, nth) ((x >> (24 - (8 * nth))) & 0xFF) |
| #define Val_Ratio(x, nth) ((x & 0xFF) << (24 - (8 * nth))) |
| #define FUNC_CFG1 0x16 |
| #define FUNC_CFG2 0x17 |
| |
| /* DEVICE_ID */ |
| #define REVISION_MASK (0x7) |
| #define REVISION_B2_B3 (0x4) |
| #define REVISION_C1 (0x6) |
| |
| /* DEVICE_CTRL */ |
| #define PLL_UNLOCK (1 << 7) |
| |
| /* DEVICE_CFG1 */ |
| #define RSEL(x) (((x) & 0x3) << 3) |
| #define RSEL_MASK RSEL(0x3) |
| #define ENDEV1 (0x1) |
| |
| /* GLOBAL_CFG */ |
| #define ENDEV2 (0x1) |
| |
| #define CH_SIZE_ERR(ch) ((ch < 0) || (ch >= CH_MAX)) |
| #define hw_to_priv(_hw) container_of(_hw, struct cs2000_priv, hw) |
| #define priv_to_client(priv) (priv->client) |
| #define priv_to_dev(priv) (&(priv_to_client(priv)->dev)) |
| |
| #define CLK_IN 0 |
| #define REF_CLK 1 |
| #define CLK_MAX 2 |
| |
| struct cs2000_priv { |
| struct clk_hw hw; |
| struct i2c_client *client; |
| struct clk *clk_in; |
| struct clk *ref_clk; |
| struct clk *clk_out; |
| }; |
| |
| static const struct of_device_id cs2000_of_match[] = { |
| { .compatible = "cirrus,cs2000-cp", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, cs2000_of_match); |
| |
| static const struct i2c_device_id cs2000_id[] = { |
| { "cs2000-cp", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, cs2000_id); |
| |
| #define cs2000_read(priv, addr) \ |
| i2c_smbus_read_byte_data(priv_to_client(priv), addr) |
| #define cs2000_write(priv, addr, val) \ |
| i2c_smbus_write_byte_data(priv_to_client(priv), addr, val) |
| |
| static int cs2000_bset(struct cs2000_priv *priv, u8 addr, u8 mask, u8 val) |
| { |
| s32 data; |
| |
| data = cs2000_read(priv, addr); |
| if (data < 0) |
| return data; |
| |
| data &= ~mask; |
| data |= (val & mask); |
| |
| return cs2000_write(priv, addr, data); |
| } |
| |
| static int cs2000_enable_dev_config(struct cs2000_priv *priv, bool enable) |
| { |
| int ret; |
| |
| ret = cs2000_bset(priv, DEVICE_CFG1, ENDEV1, |
| enable ? ENDEV1 : 0); |
| if (ret < 0) |
| return ret; |
| |
| ret = cs2000_bset(priv, GLOBAL_CFG, ENDEV2, |
| enable ? ENDEV2 : 0); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int cs2000_clk_in_bound_rate(struct cs2000_priv *priv, |
| u32 rate_in) |
| { |
| u32 val; |
| |
| if (rate_in >= 32000000 && rate_in < 56000000) |
| val = 0x0; |
| else if (rate_in >= 16000000 && rate_in < 28000000) |
| val = 0x1; |
| else if (rate_in >= 8000000 && rate_in < 14000000) |
| val = 0x2; |
| else |
| return -EINVAL; |
| |
| return cs2000_bset(priv, FUNC_CFG1, 0x3 << 3, val << 3); |
| } |
| |
| static int cs2000_wait_pll_lock(struct cs2000_priv *priv) |
| { |
| struct device *dev = priv_to_dev(priv); |
| s32 val; |
| unsigned int i; |
| |
| for (i = 0; i < 256; i++) { |
| val = cs2000_read(priv, DEVICE_CTRL); |
| if (val < 0) |
| return val; |
| if (!(val & PLL_UNLOCK)) |
| return 0; |
| udelay(1); |
| } |
| |
| dev_err(dev, "pll lock failed\n"); |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int cs2000_clk_out_enable(struct cs2000_priv *priv, bool enable) |
| { |
| /* enable both AUX_OUT, CLK_OUT */ |
| return cs2000_write(priv, DEVICE_CTRL, enable ? 0 : 0x3); |
| } |
| |
| static u32 cs2000_rate_to_ratio(u32 rate_in, u32 rate_out) |
| { |
| u64 ratio; |
| |
| /* |
| * ratio = rate_out / rate_in * 2^20 |
| * |
| * To avoid over flow, rate_out is u64. |
| * The result should be u32. |
| */ |
| ratio = (u64)rate_out << 20; |
| do_div(ratio, rate_in); |
| |
| return ratio; |
| } |
| |
| static unsigned long cs2000_ratio_to_rate(u32 ratio, u32 rate_in) |
| { |
| u64 rate_out; |
| |
| /* |
| * ratio = rate_out / rate_in * 2^20 |
| * |
| * To avoid over flow, rate_out is u64. |
| * The result should be u32 or unsigned long. |
| */ |
| |
| rate_out = (u64)ratio * rate_in; |
| return rate_out >> 20; |
| } |
| |
| static int cs2000_ratio_set(struct cs2000_priv *priv, |
| int ch, u32 rate_in, u32 rate_out) |
| { |
| u32 val; |
| unsigned int i; |
| int ret; |
| |
| if (CH_SIZE_ERR(ch)) |
| return -EINVAL; |
| |
| val = cs2000_rate_to_ratio(rate_in, rate_out); |
| for (i = 0; i < RATIO_REG_SIZE; i++) { |
| ret = cs2000_write(priv, |
| Ratio_Add(ch, i), |
| Ratio_Val(val, i)); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static u32 cs2000_ratio_get(struct cs2000_priv *priv, int ch) |
| { |
| s32 tmp; |
| u32 val; |
| unsigned int i; |
| |
| val = 0; |
| for (i = 0; i < RATIO_REG_SIZE; i++) { |
| tmp = cs2000_read(priv, Ratio_Add(ch, i)); |
| if (tmp < 0) |
| return 0; |
| |
| val |= Val_Ratio(tmp, i); |
| } |
| |
| return val; |
| } |
| |
| static int cs2000_ratio_select(struct cs2000_priv *priv, int ch) |
| { |
| int ret; |
| |
| if (CH_SIZE_ERR(ch)) |
| return -EINVAL; |
| |
| /* |
| * FIXME |
| * |
| * this driver supports static ratio mode only at this point. |
| */ |
| ret = cs2000_bset(priv, DEVICE_CFG1, RSEL_MASK, RSEL(ch)); |
| if (ret < 0) |
| return ret; |
| |
| ret = cs2000_write(priv, DEVICE_CFG2, 0x0); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static unsigned long cs2000_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct cs2000_priv *priv = hw_to_priv(hw); |
| int ch = 0; /* it uses ch0 only at this point */ |
| u32 ratio; |
| |
| ratio = cs2000_ratio_get(priv, ch); |
| |
| return cs2000_ratio_to_rate(ratio, parent_rate); |
| } |
| |
| static long cs2000_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *parent_rate) |
| { |
| u32 ratio; |
| |
| ratio = cs2000_rate_to_ratio(*parent_rate, rate); |
| |
| return cs2000_ratio_to_rate(ratio, *parent_rate); |
| } |
| |
| static int __cs2000_set_rate(struct cs2000_priv *priv, int ch, |
| unsigned long rate, unsigned long parent_rate) |
| |
| { |
| int ret; |
| |
| ret = cs2000_clk_in_bound_rate(priv, parent_rate); |
| if (ret < 0) |
| return ret; |
| |
| ret = cs2000_ratio_set(priv, ch, parent_rate, rate); |
| if (ret < 0) |
| return ret; |
| |
| ret = cs2000_ratio_select(priv, ch); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int cs2000_set_rate(struct clk_hw *hw, |
| unsigned long rate, unsigned long parent_rate) |
| { |
| struct cs2000_priv *priv = hw_to_priv(hw); |
| int ch = 0; /* it uses ch0 only at this point */ |
| |
| return __cs2000_set_rate(priv, ch, rate, parent_rate); |
| } |
| |
| static int cs2000_enable(struct clk_hw *hw) |
| { |
| struct cs2000_priv *priv = hw_to_priv(hw); |
| int ret; |
| |
| ret = cs2000_enable_dev_config(priv, true); |
| if (ret < 0) |
| return ret; |
| |
| ret = cs2000_clk_out_enable(priv, true); |
| if (ret < 0) |
| return ret; |
| |
| ret = cs2000_wait_pll_lock(priv); |
| if (ret < 0) |
| return ret; |
| |
| return ret; |
| } |
| |
| static void cs2000_disable(struct clk_hw *hw) |
| { |
| struct cs2000_priv *priv = hw_to_priv(hw); |
| |
| cs2000_enable_dev_config(priv, false); |
| |
| cs2000_clk_out_enable(priv, false); |
| } |
| |
| static u8 cs2000_get_parent(struct clk_hw *hw) |
| { |
| /* always return REF_CLK */ |
| return REF_CLK; |
| } |
| |
| static const struct clk_ops cs2000_ops = { |
| .get_parent = cs2000_get_parent, |
| .recalc_rate = cs2000_recalc_rate, |
| .round_rate = cs2000_round_rate, |
| .set_rate = cs2000_set_rate, |
| .prepare = cs2000_enable, |
| .unprepare = cs2000_disable, |
| }; |
| |
| static int cs2000_clk_get(struct cs2000_priv *priv) |
| { |
| struct i2c_client *client = priv_to_client(priv); |
| struct device *dev = &client->dev; |
| struct clk *clk_in, *ref_clk; |
| |
| clk_in = devm_clk_get(dev, "clk_in"); |
| /* not yet provided */ |
| if (IS_ERR(clk_in)) |
| return -EPROBE_DEFER; |
| |
| ref_clk = devm_clk_get(dev, "ref_clk"); |
| /* not yet provided */ |
| if (IS_ERR(ref_clk)) |
| return -EPROBE_DEFER; |
| |
| priv->clk_in = clk_in; |
| priv->ref_clk = ref_clk; |
| |
| return 0; |
| } |
| |
| static int cs2000_clk_register(struct cs2000_priv *priv) |
| { |
| struct device *dev = priv_to_dev(priv); |
| struct device_node *np = dev->of_node; |
| struct clk_init_data init; |
| const char *name = np->name; |
| struct clk *clk; |
| static const char *parent_names[CLK_MAX]; |
| int ch = 0; /* it uses ch0 only at this point */ |
| int rate; |
| int ret; |
| |
| of_property_read_string(np, "clock-output-names", &name); |
| |
| /* |
| * set default rate as 1/1. |
| * otherwise .set_rate which setup ratio |
| * is never called if user requests 1/1 rate |
| */ |
| rate = clk_get_rate(priv->ref_clk); |
| ret = __cs2000_set_rate(priv, ch, rate, rate); |
| if (ret < 0) |
| return ret; |
| |
| parent_names[CLK_IN] = __clk_get_name(priv->clk_in); |
| parent_names[REF_CLK] = __clk_get_name(priv->ref_clk); |
| |
| init.name = name; |
| init.ops = &cs2000_ops; |
| init.flags = CLK_SET_RATE_GATE; |
| init.parent_names = parent_names; |
| init.num_parents = ARRAY_SIZE(parent_names); |
| |
| priv->hw.init = &init; |
| |
| clk = clk_register(dev, &priv->hw); |
| if (IS_ERR(clk)) |
| return PTR_ERR(clk); |
| |
| ret = of_clk_add_provider(np, of_clk_src_simple_get, clk); |
| if (ret < 0) { |
| clk_unregister(clk); |
| return ret; |
| } |
| |
| priv->clk_out = clk; |
| |
| return 0; |
| } |
| |
| static int cs2000_version_print(struct cs2000_priv *priv) |
| { |
| struct i2c_client *client = priv_to_client(priv); |
| struct device *dev = &client->dev; |
| s32 val; |
| const char *revision; |
| |
| val = cs2000_read(priv, DEVICE_ID); |
| if (val < 0) |
| return val; |
| |
| /* CS2000 should be 0x0 */ |
| if (val >> 3) |
| return -EIO; |
| |
| switch (val & REVISION_MASK) { |
| case REVISION_B2_B3: |
| revision = "B2 / B3"; |
| break; |
| case REVISION_C1: |
| revision = "C1"; |
| break; |
| default: |
| return -EIO; |
| } |
| |
| dev_info(dev, "revision - %s\n", revision); |
| |
| return 0; |
| } |
| |
| static int cs2000_remove(struct i2c_client *client) |
| { |
| struct cs2000_priv *priv = i2c_get_clientdata(client); |
| struct device *dev = &client->dev; |
| struct device_node *np = dev->of_node; |
| |
| of_clk_del_provider(np); |
| |
| clk_unregister(priv->clk_out); |
| |
| return 0; |
| } |
| |
| static int cs2000_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct cs2000_priv *priv; |
| struct device *dev = &client->dev; |
| int ret; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->client = client; |
| i2c_set_clientdata(client, priv); |
| |
| ret = cs2000_clk_get(priv); |
| if (ret < 0) |
| return ret; |
| |
| ret = cs2000_clk_register(priv); |
| if (ret < 0) |
| return ret; |
| |
| ret = cs2000_version_print(priv); |
| if (ret < 0) |
| goto probe_err; |
| |
| return 0; |
| |
| probe_err: |
| cs2000_remove(client); |
| |
| return ret; |
| } |
| |
| static struct i2c_driver cs2000_driver = { |
| .driver = { |
| .name = "cs2000-cp", |
| .of_match_table = cs2000_of_match, |
| }, |
| .probe = cs2000_probe, |
| .remove = cs2000_remove, |
| .id_table = cs2000_id, |
| }; |
| |
| module_i2c_driver(cs2000_driver); |
| |
| MODULE_DESCRIPTION("CS2000-CP driver"); |
| MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"); |
| MODULE_LICENSE("GPL v2"); |