| /* |
| * Driver for the Conexant CX23885 PCIe bridge |
| * |
| * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/kmod.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <asm/div64.h> |
| #include <linux/firmware.h> |
| |
| #include "cx23885.h" |
| #include "cimax2.h" |
| #include "altera-ci.h" |
| #include "cx23888-ir.h" |
| #include "cx23885-ir.h" |
| #include "cx23885-av.h" |
| #include "cx23885-input.h" |
| |
| MODULE_DESCRIPTION("Driver for cx23885 based TV cards"); |
| MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(CX23885_VERSION); |
| |
| static unsigned int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "enable debug messages"); |
| |
| static unsigned int card[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET }; |
| module_param_array(card, int, NULL, 0444); |
| MODULE_PARM_DESC(card, "card type"); |
| |
| #define dprintk(level, fmt, arg...)\ |
| do { if (debug >= level)\ |
| printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\ |
| } while (0) |
| |
| static unsigned int cx23885_devcount; |
| |
| #define NO_SYNC_LINE (-1U) |
| |
| /* FIXME, these allocations will change when |
| * analog arrives. The be reviewed. |
| * CX23887 Assumptions |
| * 1 line = 16 bytes of CDT |
| * cmds size = 80 |
| * cdt size = 16 * linesize |
| * iqsize = 64 |
| * maxlines = 6 |
| * |
| * Address Space: |
| * 0x00000000 0x00008fff FIFO clusters |
| * 0x00010000 0x000104af Channel Management Data Structures |
| * 0x000104b0 0x000104ff Free |
| * 0x00010500 0x000108bf 15 channels * iqsize |
| * 0x000108c0 0x000108ff Free |
| * 0x00010900 0x00010e9f IQ's + Cluster Descriptor Tables |
| * 15 channels * (iqsize + (maxlines * linesize)) |
| * 0x00010ea0 0x00010xxx Free |
| */ |
| |
| static struct sram_channel cx23885_sram_channels[] = { |
| [SRAM_CH01] = { |
| .name = "VID A", |
| .cmds_start = 0x10000, |
| .ctrl_start = 0x10380, |
| .cdt = 0x104c0, |
| .fifo_start = 0x40, |
| .fifo_size = 0x2800, |
| .ptr1_reg = DMA1_PTR1, |
| .ptr2_reg = DMA1_PTR2, |
| .cnt1_reg = DMA1_CNT1, |
| .cnt2_reg = DMA1_CNT2, |
| }, |
| [SRAM_CH02] = { |
| .name = "ch2", |
| .cmds_start = 0x0, |
| .ctrl_start = 0x0, |
| .cdt = 0x0, |
| .fifo_start = 0x0, |
| .fifo_size = 0x0, |
| .ptr1_reg = DMA2_PTR1, |
| .ptr2_reg = DMA2_PTR2, |
| .cnt1_reg = DMA2_CNT1, |
| .cnt2_reg = DMA2_CNT2, |
| }, |
| [SRAM_CH03] = { |
| .name = "TS1 B", |
| .cmds_start = 0x100A0, |
| .ctrl_start = 0x10400, |
| .cdt = 0x10580, |
| .fifo_start = 0x5000, |
| .fifo_size = 0x1000, |
| .ptr1_reg = DMA3_PTR1, |
| .ptr2_reg = DMA3_PTR2, |
| .cnt1_reg = DMA3_CNT1, |
| .cnt2_reg = DMA3_CNT2, |
| }, |
| [SRAM_CH04] = { |
| .name = "ch4", |
| .cmds_start = 0x0, |
| .ctrl_start = 0x0, |
| .cdt = 0x0, |
| .fifo_start = 0x0, |
| .fifo_size = 0x0, |
| .ptr1_reg = DMA4_PTR1, |
| .ptr2_reg = DMA4_PTR2, |
| .cnt1_reg = DMA4_CNT1, |
| .cnt2_reg = DMA4_CNT2, |
| }, |
| [SRAM_CH05] = { |
| .name = "ch5", |
| .cmds_start = 0x0, |
| .ctrl_start = 0x0, |
| .cdt = 0x0, |
| .fifo_start = 0x0, |
| .fifo_size = 0x0, |
| .ptr1_reg = DMA5_PTR1, |
| .ptr2_reg = DMA5_PTR2, |
| .cnt1_reg = DMA5_CNT1, |
| .cnt2_reg = DMA5_CNT2, |
| }, |
| [SRAM_CH06] = { |
| .name = "TS2 C", |
| .cmds_start = 0x10140, |
| .ctrl_start = 0x10440, |
| .cdt = 0x105e0, |
| .fifo_start = 0x6000, |
| .fifo_size = 0x1000, |
| .ptr1_reg = DMA5_PTR1, |
| .ptr2_reg = DMA5_PTR2, |
| .cnt1_reg = DMA5_CNT1, |
| .cnt2_reg = DMA5_CNT2, |
| }, |
| [SRAM_CH07] = { |
| .name = "TV Audio", |
| .cmds_start = 0x10190, |
| .ctrl_start = 0x10480, |
| .cdt = 0x10a00, |
| .fifo_start = 0x7000, |
| .fifo_size = 0x1000, |
| .ptr1_reg = DMA6_PTR1, |
| .ptr2_reg = DMA6_PTR2, |
| .cnt1_reg = DMA6_CNT1, |
| .cnt2_reg = DMA6_CNT2, |
| }, |
| [SRAM_CH08] = { |
| .name = "ch8", |
| .cmds_start = 0x0, |
| .ctrl_start = 0x0, |
| .cdt = 0x0, |
| .fifo_start = 0x0, |
| .fifo_size = 0x0, |
| .ptr1_reg = DMA7_PTR1, |
| .ptr2_reg = DMA7_PTR2, |
| .cnt1_reg = DMA7_CNT1, |
| .cnt2_reg = DMA7_CNT2, |
| }, |
| [SRAM_CH09] = { |
| .name = "ch9", |
| .cmds_start = 0x0, |
| .ctrl_start = 0x0, |
| .cdt = 0x0, |
| .fifo_start = 0x0, |
| .fifo_size = 0x0, |
| .ptr1_reg = DMA8_PTR1, |
| .ptr2_reg = DMA8_PTR2, |
| .cnt1_reg = DMA8_CNT1, |
| .cnt2_reg = DMA8_CNT2, |
| }, |
| }; |
| |
| static struct sram_channel cx23887_sram_channels[] = { |
| [SRAM_CH01] = { |
| .name = "VID A", |
| .cmds_start = 0x10000, |
| .ctrl_start = 0x105b0, |
| .cdt = 0x107b0, |
| .fifo_start = 0x40, |
| .fifo_size = 0x2800, |
| .ptr1_reg = DMA1_PTR1, |
| .ptr2_reg = DMA1_PTR2, |
| .cnt1_reg = DMA1_CNT1, |
| .cnt2_reg = DMA1_CNT2, |
| }, |
| [SRAM_CH02] = { |
| .name = "VID A (VBI)", |
| .cmds_start = 0x10050, |
| .ctrl_start = 0x105F0, |
| .cdt = 0x10810, |
| .fifo_start = 0x3000, |
| .fifo_size = 0x1000, |
| .ptr1_reg = DMA2_PTR1, |
| .ptr2_reg = DMA2_PTR2, |
| .cnt1_reg = DMA2_CNT1, |
| .cnt2_reg = DMA2_CNT2, |
| }, |
| [SRAM_CH03] = { |
| .name = "TS1 B", |
| .cmds_start = 0x100A0, |
| .ctrl_start = 0x10630, |
| .cdt = 0x10870, |
| .fifo_start = 0x5000, |
| .fifo_size = 0x1000, |
| .ptr1_reg = DMA3_PTR1, |
| .ptr2_reg = DMA3_PTR2, |
| .cnt1_reg = DMA3_CNT1, |
| .cnt2_reg = DMA3_CNT2, |
| }, |
| [SRAM_CH04] = { |
| .name = "ch4", |
| .cmds_start = 0x0, |
| .ctrl_start = 0x0, |
| .cdt = 0x0, |
| .fifo_start = 0x0, |
| .fifo_size = 0x0, |
| .ptr1_reg = DMA4_PTR1, |
| .ptr2_reg = DMA4_PTR2, |
| .cnt1_reg = DMA4_CNT1, |
| .cnt2_reg = DMA4_CNT2, |
| }, |
| [SRAM_CH05] = { |
| .name = "ch5", |
| .cmds_start = 0x0, |
| .ctrl_start = 0x0, |
| .cdt = 0x0, |
| .fifo_start = 0x0, |
| .fifo_size = 0x0, |
| .ptr1_reg = DMA5_PTR1, |
| .ptr2_reg = DMA5_PTR2, |
| .cnt1_reg = DMA5_CNT1, |
| .cnt2_reg = DMA5_CNT2, |
| }, |
| [SRAM_CH06] = { |
| .name = "TS2 C", |
| .cmds_start = 0x10140, |
| .ctrl_start = 0x10670, |
| .cdt = 0x108d0, |
| .fifo_start = 0x6000, |
| .fifo_size = 0x1000, |
| .ptr1_reg = DMA5_PTR1, |
| .ptr2_reg = DMA5_PTR2, |
| .cnt1_reg = DMA5_CNT1, |
| .cnt2_reg = DMA5_CNT2, |
| }, |
| [SRAM_CH07] = { |
| .name = "TV Audio", |
| .cmds_start = 0x10190, |
| .ctrl_start = 0x106B0, |
| .cdt = 0x10930, |
| .fifo_start = 0x7000, |
| .fifo_size = 0x1000, |
| .ptr1_reg = DMA6_PTR1, |
| .ptr2_reg = DMA6_PTR2, |
| .cnt1_reg = DMA6_CNT1, |
| .cnt2_reg = DMA6_CNT2, |
| }, |
| [SRAM_CH08] = { |
| .name = "ch8", |
| .cmds_start = 0x0, |
| .ctrl_start = 0x0, |
| .cdt = 0x0, |
| .fifo_start = 0x0, |
| .fifo_size = 0x0, |
| .ptr1_reg = DMA7_PTR1, |
| .ptr2_reg = DMA7_PTR2, |
| .cnt1_reg = DMA7_CNT1, |
| .cnt2_reg = DMA7_CNT2, |
| }, |
| [SRAM_CH09] = { |
| .name = "ch9", |
| .cmds_start = 0x0, |
| .ctrl_start = 0x0, |
| .cdt = 0x0, |
| .fifo_start = 0x0, |
| .fifo_size = 0x0, |
| .ptr1_reg = DMA8_PTR1, |
| .ptr2_reg = DMA8_PTR2, |
| .cnt1_reg = DMA8_CNT1, |
| .cnt2_reg = DMA8_CNT2, |
| }, |
| }; |
| |
| static void cx23885_irq_add(struct cx23885_dev *dev, u32 mask) |
| { |
| unsigned long flags; |
| spin_lock_irqsave(&dev->pci_irqmask_lock, flags); |
| |
| dev->pci_irqmask |= mask; |
| |
| spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags); |
| } |
| |
| void cx23885_irq_add_enable(struct cx23885_dev *dev, u32 mask) |
| { |
| unsigned long flags; |
| spin_lock_irqsave(&dev->pci_irqmask_lock, flags); |
| |
| dev->pci_irqmask |= mask; |
| cx_set(PCI_INT_MSK, mask); |
| |
| spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags); |
| } |
| |
| void cx23885_irq_enable(struct cx23885_dev *dev, u32 mask) |
| { |
| u32 v; |
| unsigned long flags; |
| spin_lock_irqsave(&dev->pci_irqmask_lock, flags); |
| |
| v = mask & dev->pci_irqmask; |
| if (v) |
| cx_set(PCI_INT_MSK, v); |
| |
| spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags); |
| } |
| |
| static inline void cx23885_irq_enable_all(struct cx23885_dev *dev) |
| { |
| cx23885_irq_enable(dev, 0xffffffff); |
| } |
| |
| void cx23885_irq_disable(struct cx23885_dev *dev, u32 mask) |
| { |
| unsigned long flags; |
| spin_lock_irqsave(&dev->pci_irqmask_lock, flags); |
| |
| cx_clear(PCI_INT_MSK, mask); |
| |
| spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags); |
| } |
| |
| static inline void cx23885_irq_disable_all(struct cx23885_dev *dev) |
| { |
| cx23885_irq_disable(dev, 0xffffffff); |
| } |
| |
| void cx23885_irq_remove(struct cx23885_dev *dev, u32 mask) |
| { |
| unsigned long flags; |
| spin_lock_irqsave(&dev->pci_irqmask_lock, flags); |
| |
| dev->pci_irqmask &= ~mask; |
| cx_clear(PCI_INT_MSK, mask); |
| |
| spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags); |
| } |
| |
| static u32 cx23885_irq_get_mask(struct cx23885_dev *dev) |
| { |
| u32 v; |
| unsigned long flags; |
| spin_lock_irqsave(&dev->pci_irqmask_lock, flags); |
| |
| v = cx_read(PCI_INT_MSK); |
| |
| spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags); |
| return v; |
| } |
| |
| static int cx23885_risc_decode(u32 risc) |
| { |
| static char *instr[16] = { |
| [RISC_SYNC >> 28] = "sync", |
| [RISC_WRITE >> 28] = "write", |
| [RISC_WRITEC >> 28] = "writec", |
| [RISC_READ >> 28] = "read", |
| [RISC_READC >> 28] = "readc", |
| [RISC_JUMP >> 28] = "jump", |
| [RISC_SKIP >> 28] = "skip", |
| [RISC_WRITERM >> 28] = "writerm", |
| [RISC_WRITECM >> 28] = "writecm", |
| [RISC_WRITECR >> 28] = "writecr", |
| }; |
| static int incr[16] = { |
| [RISC_WRITE >> 28] = 3, |
| [RISC_JUMP >> 28] = 3, |
| [RISC_SKIP >> 28] = 1, |
| [RISC_SYNC >> 28] = 1, |
| [RISC_WRITERM >> 28] = 3, |
| [RISC_WRITECM >> 28] = 3, |
| [RISC_WRITECR >> 28] = 4, |
| }; |
| static char *bits[] = { |
| "12", "13", "14", "resync", |
| "cnt0", "cnt1", "18", "19", |
| "20", "21", "22", "23", |
| "irq1", "irq2", "eol", "sol", |
| }; |
| int i; |
| |
| printk("0x%08x [ %s", risc, |
| instr[risc >> 28] ? instr[risc >> 28] : "INVALID"); |
| for (i = ARRAY_SIZE(bits) - 1; i >= 0; i--) |
| if (risc & (1 << (i + 12))) |
| printk(" %s", bits[i]); |
| printk(" count=%d ]\n", risc & 0xfff); |
| return incr[risc >> 28] ? incr[risc >> 28] : 1; |
| } |
| |
| static void cx23885_wakeup(struct cx23885_tsport *port, |
| struct cx23885_dmaqueue *q, u32 count) |
| { |
| struct cx23885_dev *dev = port->dev; |
| struct cx23885_buffer *buf; |
| |
| if (list_empty(&q->active)) |
| return; |
| buf = list_entry(q->active.next, |
| struct cx23885_buffer, queue); |
| |
| buf->vb.vb2_buf.timestamp = ktime_get_ns(); |
| buf->vb.sequence = q->count++; |
| dprintk(1, "[%p/%d] wakeup reg=%d buf=%d\n", buf, |
| buf->vb.vb2_buf.index, |
| count, q->count); |
| list_del(&buf->queue); |
| vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); |
| } |
| |
| int cx23885_sram_channel_setup(struct cx23885_dev *dev, |
| struct sram_channel *ch, |
| unsigned int bpl, u32 risc) |
| { |
| unsigned int i, lines; |
| u32 cdt; |
| |
| if (ch->cmds_start == 0) { |
| dprintk(1, "%s() Erasing channel [%s]\n", __func__, |
| ch->name); |
| cx_write(ch->ptr1_reg, 0); |
| cx_write(ch->ptr2_reg, 0); |
| cx_write(ch->cnt2_reg, 0); |
| cx_write(ch->cnt1_reg, 0); |
| return 0; |
| } else { |
| dprintk(1, "%s() Configuring channel [%s]\n", __func__, |
| ch->name); |
| } |
| |
| bpl = (bpl + 7) & ~7; /* alignment */ |
| cdt = ch->cdt; |
| lines = ch->fifo_size / bpl; |
| if (lines > 6) |
| lines = 6; |
| BUG_ON(lines < 2); |
| |
| cx_write(8 + 0, RISC_JUMP | RISC_CNT_RESET); |
| cx_write(8 + 4, 12); |
| cx_write(8 + 8, 0); |
| |
| /* write CDT */ |
| for (i = 0; i < lines; i++) { |
| dprintk(2, "%s() 0x%08x <- 0x%08x\n", __func__, cdt + 16*i, |
| ch->fifo_start + bpl*i); |
| cx_write(cdt + 16*i, ch->fifo_start + bpl*i); |
| cx_write(cdt + 16*i + 4, 0); |
| cx_write(cdt + 16*i + 8, 0); |
| cx_write(cdt + 16*i + 12, 0); |
| } |
| |
| /* write CMDS */ |
| if (ch->jumponly) |
| cx_write(ch->cmds_start + 0, 8); |
| else |
| cx_write(ch->cmds_start + 0, risc); |
| cx_write(ch->cmds_start + 4, 0); /* 64 bits 63-32 */ |
| cx_write(ch->cmds_start + 8, cdt); |
| cx_write(ch->cmds_start + 12, (lines*16) >> 3); |
| cx_write(ch->cmds_start + 16, ch->ctrl_start); |
| if (ch->jumponly) |
| cx_write(ch->cmds_start + 20, 0x80000000 | (64 >> 2)); |
| else |
| cx_write(ch->cmds_start + 20, 64 >> 2); |
| for (i = 24; i < 80; i += 4) |
| cx_write(ch->cmds_start + i, 0); |
| |
| /* fill registers */ |
| cx_write(ch->ptr1_reg, ch->fifo_start); |
| cx_write(ch->ptr2_reg, cdt); |
| cx_write(ch->cnt2_reg, (lines*16) >> 3); |
| cx_write(ch->cnt1_reg, (bpl >> 3) - 1); |
| |
| dprintk(2, "[bridge %d] sram setup %s: bpl=%d lines=%d\n", |
| dev->bridge, |
| ch->name, |
| bpl, |
| lines); |
| |
| return 0; |
| } |
| |
| void cx23885_sram_channel_dump(struct cx23885_dev *dev, |
| struct sram_channel *ch) |
| { |
| static char *name[] = { |
| "init risc lo", |
| "init risc hi", |
| "cdt base", |
| "cdt size", |
| "iq base", |
| "iq size", |
| "risc pc lo", |
| "risc pc hi", |
| "iq wr ptr", |
| "iq rd ptr", |
| "cdt current", |
| "pci target lo", |
| "pci target hi", |
| "line / byte", |
| }; |
| u32 risc; |
| unsigned int i, j, n; |
| |
| printk(KERN_WARNING "%s: %s - dma channel status dump\n", |
| dev->name, ch->name); |
| for (i = 0; i < ARRAY_SIZE(name); i++) |
| printk(KERN_WARNING "%s: cmds: %-15s: 0x%08x\n", |
| dev->name, name[i], |
| cx_read(ch->cmds_start + 4*i)); |
| |
| for (i = 0; i < 4; i++) { |
| risc = cx_read(ch->cmds_start + 4 * (i + 14)); |
| printk(KERN_WARNING "%s: risc%d: ", dev->name, i); |
| cx23885_risc_decode(risc); |
| } |
| for (i = 0; i < (64 >> 2); i += n) { |
| risc = cx_read(ch->ctrl_start + 4 * i); |
| /* No consideration for bits 63-32 */ |
| |
| printk(KERN_WARNING "%s: (0x%08x) iq %x: ", dev->name, |
| ch->ctrl_start + 4 * i, i); |
| n = cx23885_risc_decode(risc); |
| for (j = 1; j < n; j++) { |
| risc = cx_read(ch->ctrl_start + 4 * (i + j)); |
| printk(KERN_WARNING "%s: iq %x: 0x%08x [ arg #%d ]\n", |
| dev->name, i+j, risc, j); |
| } |
| } |
| |
| printk(KERN_WARNING "%s: fifo: 0x%08x -> 0x%x\n", |
| dev->name, ch->fifo_start, ch->fifo_start+ch->fifo_size); |
| printk(KERN_WARNING "%s: ctrl: 0x%08x -> 0x%x\n", |
| dev->name, ch->ctrl_start, ch->ctrl_start + 6*16); |
| printk(KERN_WARNING "%s: ptr1_reg: 0x%08x\n", |
| dev->name, cx_read(ch->ptr1_reg)); |
| printk(KERN_WARNING "%s: ptr2_reg: 0x%08x\n", |
| dev->name, cx_read(ch->ptr2_reg)); |
| printk(KERN_WARNING "%s: cnt1_reg: 0x%08x\n", |
| dev->name, cx_read(ch->cnt1_reg)); |
| printk(KERN_WARNING "%s: cnt2_reg: 0x%08x\n", |
| dev->name, cx_read(ch->cnt2_reg)); |
| } |
| |
| static void cx23885_risc_disasm(struct cx23885_tsport *port, |
| struct cx23885_riscmem *risc) |
| { |
| struct cx23885_dev *dev = port->dev; |
| unsigned int i, j, n; |
| |
| printk(KERN_INFO "%s: risc disasm: %p [dma=0x%08lx]\n", |
| dev->name, risc->cpu, (unsigned long)risc->dma); |
| for (i = 0; i < (risc->size >> 2); i += n) { |
| printk(KERN_INFO "%s: %04d: ", dev->name, i); |
| n = cx23885_risc_decode(le32_to_cpu(risc->cpu[i])); |
| for (j = 1; j < n; j++) |
| printk(KERN_INFO "%s: %04d: 0x%08x [ arg #%d ]\n", |
| dev->name, i + j, risc->cpu[i + j], j); |
| if (risc->cpu[i] == cpu_to_le32(RISC_JUMP)) |
| break; |
| } |
| } |
| |
| static void cx23885_shutdown(struct cx23885_dev *dev) |
| { |
| /* disable RISC controller */ |
| cx_write(DEV_CNTRL2, 0); |
| |
| /* Disable all IR activity */ |
| cx_write(IR_CNTRL_REG, 0); |
| |
| /* Disable Video A/B activity */ |
| cx_write(VID_A_DMA_CTL, 0); |
| cx_write(VID_B_DMA_CTL, 0); |
| cx_write(VID_C_DMA_CTL, 0); |
| |
| /* Disable Audio activity */ |
| cx_write(AUD_INT_DMA_CTL, 0); |
| cx_write(AUD_EXT_DMA_CTL, 0); |
| |
| /* Disable Serial port */ |
| cx_write(UART_CTL, 0); |
| |
| /* Disable Interrupts */ |
| cx23885_irq_disable_all(dev); |
| cx_write(VID_A_INT_MSK, 0); |
| cx_write(VID_B_INT_MSK, 0); |
| cx_write(VID_C_INT_MSK, 0); |
| cx_write(AUDIO_INT_INT_MSK, 0); |
| cx_write(AUDIO_EXT_INT_MSK, 0); |
| |
| } |
| |
| static void cx23885_reset(struct cx23885_dev *dev) |
| { |
| dprintk(1, "%s()\n", __func__); |
| |
| cx23885_shutdown(dev); |
| |
| cx_write(PCI_INT_STAT, 0xffffffff); |
| cx_write(VID_A_INT_STAT, 0xffffffff); |
| cx_write(VID_B_INT_STAT, 0xffffffff); |
| cx_write(VID_C_INT_STAT, 0xffffffff); |
| cx_write(AUDIO_INT_INT_STAT, 0xffffffff); |
| cx_write(AUDIO_EXT_INT_STAT, 0xffffffff); |
| cx_write(CLK_DELAY, cx_read(CLK_DELAY) & 0x80000000); |
| cx_write(PAD_CTRL, 0x00500300); |
| |
| mdelay(100); |
| |
| cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH01], |
| 720*4, 0); |
| cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH02], 128, 0); |
| cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH03], |
| 188*4, 0); |
| cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH04], 128, 0); |
| cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH05], 128, 0); |
| cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH06], |
| 188*4, 0); |
| cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH07], 128, 0); |
| cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH08], 128, 0); |
| cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH09], 128, 0); |
| |
| cx23885_gpio_setup(dev); |
| } |
| |
| |
| static int cx23885_pci_quirks(struct cx23885_dev *dev) |
| { |
| dprintk(1, "%s()\n", __func__); |
| |
| /* The cx23885 bridge has a weird bug which causes NMI to be asserted |
| * when DMA begins if RDR_TLCTL0 bit4 is not cleared. It does not |
| * occur on the cx23887 bridge. |
| */ |
| if (dev->bridge == CX23885_BRIDGE_885) |
| cx_clear(RDR_TLCTL0, 1 << 4); |
| |
| return 0; |
| } |
| |
| static int get_resources(struct cx23885_dev *dev) |
| { |
| if (request_mem_region(pci_resource_start(dev->pci, 0), |
| pci_resource_len(dev->pci, 0), |
| dev->name)) |
| return 0; |
| |
| printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx\n", |
| dev->name, (unsigned long long)pci_resource_start(dev->pci, 0)); |
| |
| return -EBUSY; |
| } |
| |
| static int cx23885_init_tsport(struct cx23885_dev *dev, |
| struct cx23885_tsport *port, int portno) |
| { |
| dprintk(1, "%s(portno=%d)\n", __func__, portno); |
| |
| /* Transport bus init dma queue - Common settings */ |
| port->dma_ctl_val = 0x11; /* Enable RISC controller and Fifo */ |
| port->ts_int_msk_val = 0x1111; /* TS port bits for RISC */ |
| port->vld_misc_val = 0x0; |
| port->hw_sop_ctrl_val = (0x47 << 16 | 188 << 4); |
| |
| spin_lock_init(&port->slock); |
| port->dev = dev; |
| port->nr = portno; |
| |
| INIT_LIST_HEAD(&port->mpegq.active); |
| mutex_init(&port->frontends.lock); |
| INIT_LIST_HEAD(&port->frontends.felist); |
| port->frontends.active_fe_id = 0; |
| |
| /* This should be hardcoded allow a single frontend |
| * attachment to this tsport, keeping the -dvb.c |
| * code clean and safe. |
| */ |
| if (!port->num_frontends) |
| port->num_frontends = 1; |
| |
| switch (portno) { |
| case 1: |
| port->reg_gpcnt = VID_B_GPCNT; |
| port->reg_gpcnt_ctl = VID_B_GPCNT_CTL; |
| port->reg_dma_ctl = VID_B_DMA_CTL; |
| port->reg_lngth = VID_B_LNGTH; |
| port->reg_hw_sop_ctrl = VID_B_HW_SOP_CTL; |
| port->reg_gen_ctrl = VID_B_GEN_CTL; |
| port->reg_bd_pkt_status = VID_B_BD_PKT_STATUS; |
| port->reg_sop_status = VID_B_SOP_STATUS; |
| port->reg_fifo_ovfl_stat = VID_B_FIFO_OVFL_STAT; |
| port->reg_vld_misc = VID_B_VLD_MISC; |
| port->reg_ts_clk_en = VID_B_TS_CLK_EN; |
| port->reg_src_sel = VID_B_SRC_SEL; |
| port->reg_ts_int_msk = VID_B_INT_MSK; |
| port->reg_ts_int_stat = VID_B_INT_STAT; |
| port->sram_chno = SRAM_CH03; /* VID_B */ |
| port->pci_irqmask = 0x02; /* VID_B bit1 */ |
| break; |
| case 2: |
| port->reg_gpcnt = VID_C_GPCNT; |
| port->reg_gpcnt_ctl = VID_C_GPCNT_CTL; |
| port->reg_dma_ctl = VID_C_DMA_CTL; |
| port->reg_lngth = VID_C_LNGTH; |
| port->reg_hw_sop_ctrl = VID_C_HW_SOP_CTL; |
| port->reg_gen_ctrl = VID_C_GEN_CTL; |
| port->reg_bd_pkt_status = VID_C_BD_PKT_STATUS; |
| port->reg_sop_status = VID_C_SOP_STATUS; |
| port->reg_fifo_ovfl_stat = VID_C_FIFO_OVFL_STAT; |
| port->reg_vld_misc = VID_C_VLD_MISC; |
| port->reg_ts_clk_en = VID_C_TS_CLK_EN; |
| port->reg_src_sel = 0; |
| port->reg_ts_int_msk = VID_C_INT_MSK; |
| port->reg_ts_int_stat = VID_C_INT_STAT; |
| port->sram_chno = SRAM_CH06; /* VID_C */ |
| port->pci_irqmask = 0x04; /* VID_C bit2 */ |
| break; |
| default: |
| BUG(); |
| } |
| |
| return 0; |
| } |
| |
| static void cx23885_dev_checkrevision(struct cx23885_dev *dev) |
| { |
| switch (cx_read(RDR_CFG2) & 0xff) { |
| case 0x00: |
| /* cx23885 */ |
| dev->hwrevision = 0xa0; |
| break; |
| case 0x01: |
| /* CX23885-12Z */ |
| dev->hwrevision = 0xa1; |
| break; |
| case 0x02: |
| /* CX23885-13Z/14Z */ |
| dev->hwrevision = 0xb0; |
| break; |
| case 0x03: |
| if (dev->pci->device == 0x8880) { |
| /* CX23888-21Z/22Z */ |
| dev->hwrevision = 0xc0; |
| } else { |
| /* CX23885-14Z */ |
| dev->hwrevision = 0xa4; |
| } |
| break; |
| case 0x04: |
| if (dev->pci->device == 0x8880) { |
| /* CX23888-31Z */ |
| dev->hwrevision = 0xd0; |
| } else { |
| /* CX23885-15Z, CX23888-31Z */ |
| dev->hwrevision = 0xa5; |
| } |
| break; |
| case 0x0e: |
| /* CX23887-15Z */ |
| dev->hwrevision = 0xc0; |
| break; |
| case 0x0f: |
| /* CX23887-14Z */ |
| dev->hwrevision = 0xb1; |
| break; |
| default: |
| printk(KERN_ERR "%s() New hardware revision found 0x%x\n", |
| __func__, dev->hwrevision); |
| } |
| if (dev->hwrevision) |
| printk(KERN_INFO "%s() Hardware revision = 0x%02x\n", |
| __func__, dev->hwrevision); |
| else |
| printk(KERN_ERR "%s() Hardware revision unknown 0x%x\n", |
| __func__, dev->hwrevision); |
| } |
| |
| /* Find the first v4l2_subdev member of the group id in hw */ |
| struct v4l2_subdev *cx23885_find_hw(struct cx23885_dev *dev, u32 hw) |
| { |
| struct v4l2_subdev *result = NULL; |
| struct v4l2_subdev *sd; |
| |
| spin_lock(&dev->v4l2_dev.lock); |
| v4l2_device_for_each_subdev(sd, &dev->v4l2_dev) { |
| if (sd->grp_id == hw) { |
| result = sd; |
| break; |
| } |
| } |
| spin_unlock(&dev->v4l2_dev.lock); |
| return result; |
| } |
| |
| static int cx23885_dev_setup(struct cx23885_dev *dev) |
| { |
| int i; |
| |
| spin_lock_init(&dev->pci_irqmask_lock); |
| spin_lock_init(&dev->slock); |
| |
| mutex_init(&dev->lock); |
| mutex_init(&dev->gpio_lock); |
| |
| atomic_inc(&dev->refcount); |
| |
| dev->nr = cx23885_devcount++; |
| sprintf(dev->name, "cx23885[%d]", dev->nr); |
| |
| /* Configure the internal memory */ |
| if (dev->pci->device == 0x8880) { |
| /* Could be 887 or 888, assume a default */ |
| dev->bridge = CX23885_BRIDGE_887; |
| /* Apply a sensible clock frequency for the PCIe bridge */ |
| dev->clk_freq = 25000000; |
| dev->sram_channels = cx23887_sram_channels; |
| } else |
| if (dev->pci->device == 0x8852) { |
| dev->bridge = CX23885_BRIDGE_885; |
| /* Apply a sensible clock frequency for the PCIe bridge */ |
| dev->clk_freq = 28000000; |
| dev->sram_channels = cx23885_sram_channels; |
| } else |
| BUG(); |
| |
| dprintk(1, "%s() Memory configured for PCIe bridge type %d\n", |
| __func__, dev->bridge); |
| |
| /* board config */ |
| dev->board = UNSET; |
| if (card[dev->nr] < cx23885_bcount) |
| dev->board = card[dev->nr]; |
| for (i = 0; UNSET == dev->board && i < cx23885_idcount; i++) |
| if (dev->pci->subsystem_vendor == cx23885_subids[i].subvendor && |
| dev->pci->subsystem_device == cx23885_subids[i].subdevice) |
| dev->board = cx23885_subids[i].card; |
| if (UNSET == dev->board) { |
| dev->board = CX23885_BOARD_UNKNOWN; |
| cx23885_card_list(dev); |
| } |
| |
| /* If the user specific a clk freq override, apply it */ |
| if (cx23885_boards[dev->board].clk_freq > 0) |
| dev->clk_freq = cx23885_boards[dev->board].clk_freq; |
| |
| dev->pci_bus = dev->pci->bus->number; |
| dev->pci_slot = PCI_SLOT(dev->pci->devfn); |
| cx23885_irq_add(dev, 0x001f00); |
| |
| /* External Master 1 Bus */ |
| dev->i2c_bus[0].nr = 0; |
| dev->i2c_bus[0].dev = dev; |
| dev->i2c_bus[0].reg_stat = I2C1_STAT; |
| dev->i2c_bus[0].reg_ctrl = I2C1_CTRL; |
| dev->i2c_bus[0].reg_addr = I2C1_ADDR; |
| dev->i2c_bus[0].reg_rdata = I2C1_RDATA; |
| dev->i2c_bus[0].reg_wdata = I2C1_WDATA; |
| dev->i2c_bus[0].i2c_period = (0x9d << 24); /* 100kHz */ |
| |
| /* External Master 2 Bus */ |
| dev->i2c_bus[1].nr = 1; |
| dev->i2c_bus[1].dev = dev; |
| dev->i2c_bus[1].reg_stat = I2C2_STAT; |
| dev->i2c_bus[1].reg_ctrl = I2C2_CTRL; |
| dev->i2c_bus[1].reg_addr = I2C2_ADDR; |
| dev->i2c_bus[1].reg_rdata = I2C2_RDATA; |
| dev->i2c_bus[1].reg_wdata = I2C2_WDATA; |
| dev->i2c_bus[1].i2c_period = (0x9d << 24); /* 100kHz */ |
| |
| /* Internal Master 3 Bus */ |
| dev->i2c_bus[2].nr = 2; |
| dev->i2c_bus[2].dev = dev; |
| dev->i2c_bus[2].reg_stat = I2C3_STAT; |
| dev->i2c_bus[2].reg_ctrl = I2C3_CTRL; |
| dev->i2c_bus[2].reg_addr = I2C3_ADDR; |
| dev->i2c_bus[2].reg_rdata = I2C3_RDATA; |
| dev->i2c_bus[2].reg_wdata = I2C3_WDATA; |
| dev->i2c_bus[2].i2c_period = (0x07 << 24); /* 1.95MHz */ |
| |
| if ((cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) || |
| (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER)) |
| cx23885_init_tsport(dev, &dev->ts1, 1); |
| |
| if ((cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) || |
| (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER)) |
| cx23885_init_tsport(dev, &dev->ts2, 2); |
| |
| if (get_resources(dev) < 0) { |
| printk(KERN_ERR "CORE %s No more PCIe resources for " |
| "subsystem: %04x:%04x\n", |
| dev->name, dev->pci->subsystem_vendor, |
| dev->pci->subsystem_device); |
| |
| cx23885_devcount--; |
| return -ENODEV; |
| } |
| |
| /* PCIe stuff */ |
| dev->lmmio = ioremap(pci_resource_start(dev->pci, 0), |
| pci_resource_len(dev->pci, 0)); |
| |
| dev->bmmio = (u8 __iomem *)dev->lmmio; |
| |
| printk(KERN_INFO "CORE %s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n", |
| dev->name, dev->pci->subsystem_vendor, |
| dev->pci->subsystem_device, cx23885_boards[dev->board].name, |
| dev->board, card[dev->nr] == dev->board ? |
| "insmod option" : "autodetected"); |
| |
| cx23885_pci_quirks(dev); |
| |
| /* Assume some sensible defaults */ |
| dev->tuner_type = cx23885_boards[dev->board].tuner_type; |
| dev->tuner_addr = cx23885_boards[dev->board].tuner_addr; |
| dev->tuner_bus = cx23885_boards[dev->board].tuner_bus; |
| dev->radio_type = cx23885_boards[dev->board].radio_type; |
| dev->radio_addr = cx23885_boards[dev->board].radio_addr; |
| |
| dprintk(1, "%s() tuner_type = 0x%x tuner_addr = 0x%x tuner_bus = %d\n", |
| __func__, dev->tuner_type, dev->tuner_addr, dev->tuner_bus); |
| dprintk(1, "%s() radio_type = 0x%x radio_addr = 0x%x\n", |
| __func__, dev->radio_type, dev->radio_addr); |
| |
| /* The cx23417 encoder has GPIO's that need to be initialised |
| * before DVB, so that demodulators and tuners are out of |
| * reset before DVB uses them. |
| */ |
| if ((cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) || |
| (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER)) |
| cx23885_mc417_init(dev); |
| |
| /* init hardware */ |
| cx23885_reset(dev); |
| |
| cx23885_i2c_register(&dev->i2c_bus[0]); |
| cx23885_i2c_register(&dev->i2c_bus[1]); |
| cx23885_i2c_register(&dev->i2c_bus[2]); |
| cx23885_card_setup(dev); |
| call_all(dev, core, s_power, 0); |
| cx23885_ir_init(dev); |
| |
| if (dev->board == CX23885_BOARD_VIEWCAST_460E) { |
| /* |
| * GPIOs 9/8 are input detection bits for the breakout video |
| * (gpio 8) and audio (gpio 9) cables. When they're attached, |
| * this gpios are pulled high. Make sure these GPIOs are marked |
| * as inputs. |
| */ |
| cx23885_gpio_enable(dev, 0x300, 0); |
| } |
| |
| if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) { |
| if (cx23885_video_register(dev) < 0) { |
| printk(KERN_ERR "%s() Failed to register analog " |
| "video adapters on VID_A\n", __func__); |
| } |
| } |
| |
| if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) { |
| if (cx23885_boards[dev->board].num_fds_portb) |
| dev->ts1.num_frontends = |
| cx23885_boards[dev->board].num_fds_portb; |
| if (cx23885_dvb_register(&dev->ts1) < 0) { |
| printk(KERN_ERR "%s() Failed to register dvb adapters on VID_B\n", |
| __func__); |
| } |
| } else |
| if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) { |
| if (cx23885_417_register(dev) < 0) { |
| printk(KERN_ERR |
| "%s() Failed to register 417 on VID_B\n", |
| __func__); |
| } |
| } |
| |
| if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) { |
| if (cx23885_boards[dev->board].num_fds_portc) |
| dev->ts2.num_frontends = |
| cx23885_boards[dev->board].num_fds_portc; |
| if (cx23885_dvb_register(&dev->ts2) < 0) { |
| printk(KERN_ERR |
| "%s() Failed to register dvb on VID_C\n", |
| __func__); |
| } |
| } else |
| if (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER) { |
| if (cx23885_417_register(dev) < 0) { |
| printk(KERN_ERR |
| "%s() Failed to register 417 on VID_C\n", |
| __func__); |
| } |
| } |
| |
| cx23885_dev_checkrevision(dev); |
| |
| /* disable MSI for NetUP cards, otherwise CI is not working */ |
| if (cx23885_boards[dev->board].ci_type > 0) |
| cx_clear(RDR_RDRCTL1, 1 << 8); |
| |
| switch (dev->board) { |
| case CX23885_BOARD_TEVII_S470: |
| case CX23885_BOARD_TEVII_S471: |
| cx_clear(RDR_RDRCTL1, 1 << 8); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static void cx23885_dev_unregister(struct cx23885_dev *dev) |
| { |
| release_mem_region(pci_resource_start(dev->pci, 0), |
| pci_resource_len(dev->pci, 0)); |
| |
| if (!atomic_dec_and_test(&dev->refcount)) |
| return; |
| |
| if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) |
| cx23885_video_unregister(dev); |
| |
| if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) |
| cx23885_dvb_unregister(&dev->ts1); |
| |
| if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) |
| cx23885_417_unregister(dev); |
| |
| if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) |
| cx23885_dvb_unregister(&dev->ts2); |
| |
| if (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER) |
| cx23885_417_unregister(dev); |
| |
| cx23885_i2c_unregister(&dev->i2c_bus[2]); |
| cx23885_i2c_unregister(&dev->i2c_bus[1]); |
| cx23885_i2c_unregister(&dev->i2c_bus[0]); |
| |
| iounmap(dev->lmmio); |
| } |
| |
| static __le32 *cx23885_risc_field(__le32 *rp, struct scatterlist *sglist, |
| unsigned int offset, u32 sync_line, |
| unsigned int bpl, unsigned int padding, |
| unsigned int lines, unsigned int lpi, bool jump) |
| { |
| struct scatterlist *sg; |
| unsigned int line, todo, sol; |
| |
| |
| if (jump) { |
| *(rp++) = cpu_to_le32(RISC_JUMP); |
| *(rp++) = cpu_to_le32(0); |
| *(rp++) = cpu_to_le32(0); /* bits 63-32 */ |
| } |
| |
| /* sync instruction */ |
| if (sync_line != NO_SYNC_LINE) |
| *(rp++) = cpu_to_le32(RISC_RESYNC | sync_line); |
| |
| /* scan lines */ |
| sg = sglist; |
| for (line = 0; line < lines; line++) { |
| while (offset && offset >= sg_dma_len(sg)) { |
| offset -= sg_dma_len(sg); |
| sg = sg_next(sg); |
| } |
| |
| if (lpi && line > 0 && !(line % lpi)) |
| sol = RISC_SOL | RISC_IRQ1 | RISC_CNT_INC; |
| else |
| sol = RISC_SOL; |
| |
| if (bpl <= sg_dma_len(sg)-offset) { |
| /* fits into current chunk */ |
| *(rp++) = cpu_to_le32(RISC_WRITE|sol|RISC_EOL|bpl); |
| *(rp++) = cpu_to_le32(sg_dma_address(sg)+offset); |
| *(rp++) = cpu_to_le32(0); /* bits 63-32 */ |
| offset += bpl; |
| } else { |
| /* scanline needs to be split */ |
| todo = bpl; |
| *(rp++) = cpu_to_le32(RISC_WRITE|sol| |
| (sg_dma_len(sg)-offset)); |
| *(rp++) = cpu_to_le32(sg_dma_address(sg)+offset); |
| *(rp++) = cpu_to_le32(0); /* bits 63-32 */ |
| todo -= (sg_dma_len(sg)-offset); |
| offset = 0; |
| sg = sg_next(sg); |
| while (todo > sg_dma_len(sg)) { |
| *(rp++) = cpu_to_le32(RISC_WRITE| |
| sg_dma_len(sg)); |
| *(rp++) = cpu_to_le32(sg_dma_address(sg)); |
| *(rp++) = cpu_to_le32(0); /* bits 63-32 */ |
| todo -= sg_dma_len(sg); |
| sg = sg_next(sg); |
| } |
| *(rp++) = cpu_to_le32(RISC_WRITE|RISC_EOL|todo); |
| *(rp++) = cpu_to_le32(sg_dma_address(sg)); |
| *(rp++) = cpu_to_le32(0); /* bits 63-32 */ |
| offset += todo; |
| } |
| offset += padding; |
| } |
| |
| return rp; |
| } |
| |
| int cx23885_risc_buffer(struct pci_dev *pci, struct cx23885_riscmem *risc, |
| struct scatterlist *sglist, unsigned int top_offset, |
| unsigned int bottom_offset, unsigned int bpl, |
| unsigned int padding, unsigned int lines) |
| { |
| u32 instructions, fields; |
| __le32 *rp; |
| |
| fields = 0; |
| if (UNSET != top_offset) |
| fields++; |
| if (UNSET != bottom_offset) |
| fields++; |
| |
| /* estimate risc mem: worst case is one write per page border + |
| one write per scan line + syncs + jump (all 2 dwords). Padding |
| can cause next bpl to start close to a page border. First DMA |
| region may be smaller than PAGE_SIZE */ |
| /* write and jump need and extra dword */ |
| instructions = fields * (1 + ((bpl + padding) * lines) |
| / PAGE_SIZE + lines); |
| instructions += 5; |
| risc->size = instructions * 12; |
| risc->cpu = pci_alloc_consistent(pci, risc->size, &risc->dma); |
| if (risc->cpu == NULL) |
| return -ENOMEM; |
| |
| /* write risc instructions */ |
| rp = risc->cpu; |
| if (UNSET != top_offset) |
| rp = cx23885_risc_field(rp, sglist, top_offset, 0, |
| bpl, padding, lines, 0, true); |
| if (UNSET != bottom_offset) |
| rp = cx23885_risc_field(rp, sglist, bottom_offset, 0x200, |
| bpl, padding, lines, 0, UNSET == top_offset); |
| |
| /* save pointer to jmp instruction address */ |
| risc->jmp = rp; |
| BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); |
| return 0; |
| } |
| |
| int cx23885_risc_databuffer(struct pci_dev *pci, |
| struct cx23885_riscmem *risc, |
| struct scatterlist *sglist, |
| unsigned int bpl, |
| unsigned int lines, unsigned int lpi) |
| { |
| u32 instructions; |
| __le32 *rp; |
| |
| /* estimate risc mem: worst case is one write per page border + |
| one write per scan line + syncs + jump (all 2 dwords). Here |
| there is no padding and no sync. First DMA region may be smaller |
| than PAGE_SIZE */ |
| /* Jump and write need an extra dword */ |
| instructions = 1 + (bpl * lines) / PAGE_SIZE + lines; |
| instructions += 4; |
| |
| risc->size = instructions * 12; |
| risc->cpu = pci_alloc_consistent(pci, risc->size, &risc->dma); |
| if (risc->cpu == NULL) |
| return -ENOMEM; |
| |
| /* write risc instructions */ |
| rp = risc->cpu; |
| rp = cx23885_risc_field(rp, sglist, 0, NO_SYNC_LINE, |
| bpl, 0, lines, lpi, lpi == 0); |
| |
| /* save pointer to jmp instruction address */ |
| risc->jmp = rp; |
| BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); |
| return 0; |
| } |
| |
| int cx23885_risc_vbibuffer(struct pci_dev *pci, struct cx23885_riscmem *risc, |
| struct scatterlist *sglist, unsigned int top_offset, |
| unsigned int bottom_offset, unsigned int bpl, |
| unsigned int padding, unsigned int lines) |
| { |
| u32 instructions, fields; |
| __le32 *rp; |
| |
| fields = 0; |
| if (UNSET != top_offset) |
| fields++; |
| if (UNSET != bottom_offset) |
| fields++; |
| |
| /* estimate risc mem: worst case is one write per page border + |
| one write per scan line + syncs + jump (all 2 dwords). Padding |
| can cause next bpl to start close to a page border. First DMA |
| region may be smaller than PAGE_SIZE */ |
| /* write and jump need and extra dword */ |
| instructions = fields * (1 + ((bpl + padding) * lines) |
| / PAGE_SIZE + lines); |
| instructions += 5; |
| risc->size = instructions * 12; |
| risc->cpu = pci_alloc_consistent(pci, risc->size, &risc->dma); |
| if (risc->cpu == NULL) |
| return -ENOMEM; |
| /* write risc instructions */ |
| rp = risc->cpu; |
| |
| /* Sync to line 6, so US CC line 21 will appear in line '12' |
| * in the userland vbi payload */ |
| if (UNSET != top_offset) |
| rp = cx23885_risc_field(rp, sglist, top_offset, 0, |
| bpl, padding, lines, 0, true); |
| |
| if (UNSET != bottom_offset) |
| rp = cx23885_risc_field(rp, sglist, bottom_offset, 0x200, |
| bpl, padding, lines, 0, UNSET == top_offset); |
| |
| |
| |
| /* save pointer to jmp instruction address */ |
| risc->jmp = rp; |
| BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); |
| return 0; |
| } |
| |
| |
| void cx23885_free_buffer(struct cx23885_dev *dev, struct cx23885_buffer *buf) |
| { |
| struct cx23885_riscmem *risc = &buf->risc; |
| |
| BUG_ON(in_interrupt()); |
| pci_free_consistent(dev->pci, risc->size, risc->cpu, risc->dma); |
| } |
| |
| static void cx23885_tsport_reg_dump(struct cx23885_tsport *port) |
| { |
| struct cx23885_dev *dev = port->dev; |
| |
| dprintk(1, "%s() Register Dump\n", __func__); |
| dprintk(1, "%s() DEV_CNTRL2 0x%08X\n", __func__, |
| cx_read(DEV_CNTRL2)); |
| dprintk(1, "%s() PCI_INT_MSK 0x%08X\n", __func__, |
| cx23885_irq_get_mask(dev)); |
| dprintk(1, "%s() AUD_INT_INT_MSK 0x%08X\n", __func__, |
| cx_read(AUDIO_INT_INT_MSK)); |
| dprintk(1, "%s() AUD_INT_DMA_CTL 0x%08X\n", __func__, |
| cx_read(AUD_INT_DMA_CTL)); |
| dprintk(1, "%s() AUD_EXT_INT_MSK 0x%08X\n", __func__, |
| cx_read(AUDIO_EXT_INT_MSK)); |
| dprintk(1, "%s() AUD_EXT_DMA_CTL 0x%08X\n", __func__, |
| cx_read(AUD_EXT_DMA_CTL)); |
| dprintk(1, "%s() PAD_CTRL 0x%08X\n", __func__, |
| cx_read(PAD_CTRL)); |
| dprintk(1, "%s() ALT_PIN_OUT_SEL 0x%08X\n", __func__, |
| cx_read(ALT_PIN_OUT_SEL)); |
| dprintk(1, "%s() GPIO2 0x%08X\n", __func__, |
| cx_read(GPIO2)); |
| dprintk(1, "%s() gpcnt(0x%08X) 0x%08X\n", __func__, |
| port->reg_gpcnt, cx_read(port->reg_gpcnt)); |
| dprintk(1, "%s() gpcnt_ctl(0x%08X) 0x%08x\n", __func__, |
| port->reg_gpcnt_ctl, cx_read(port->reg_gpcnt_ctl)); |
| dprintk(1, "%s() dma_ctl(0x%08X) 0x%08x\n", __func__, |
| port->reg_dma_ctl, cx_read(port->reg_dma_ctl)); |
| if (port->reg_src_sel) |
| dprintk(1, "%s() src_sel(0x%08X) 0x%08x\n", __func__, |
| port->reg_src_sel, cx_read(port->reg_src_sel)); |
| dprintk(1, "%s() lngth(0x%08X) 0x%08x\n", __func__, |
| port->reg_lngth, cx_read(port->reg_lngth)); |
| dprintk(1, "%s() hw_sop_ctrl(0x%08X) 0x%08x\n", __func__, |
| port->reg_hw_sop_ctrl, cx_read(port->reg_hw_sop_ctrl)); |
| dprintk(1, "%s() gen_ctrl(0x%08X) 0x%08x\n", __func__, |
| port->reg_gen_ctrl, cx_read(port->reg_gen_ctrl)); |
| dprintk(1, "%s() bd_pkt_status(0x%08X) 0x%08x\n", __func__, |
| port->reg_bd_pkt_status, cx_read(port->reg_bd_pkt_status)); |
| dprintk(1, "%s() sop_status(0x%08X) 0x%08x\n", __func__, |
| port->reg_sop_status, cx_read(port->reg_sop_status)); |
| dprintk(1, "%s() fifo_ovfl_stat(0x%08X) 0x%08x\n", __func__, |
| port->reg_fifo_ovfl_stat, cx_read(port->reg_fifo_ovfl_stat)); |
| dprintk(1, "%s() vld_misc(0x%08X) 0x%08x\n", __func__, |
| port->reg_vld_misc, cx_read(port->reg_vld_misc)); |
| dprintk(1, "%s() ts_clk_en(0x%08X) 0x%08x\n", __func__, |
| port->reg_ts_clk_en, cx_read(port->reg_ts_clk_en)); |
| dprintk(1, "%s() ts_int_msk(0x%08X) 0x%08x\n", __func__, |
| port->reg_ts_int_msk, cx_read(port->reg_ts_int_msk)); |
| } |
| |
| int cx23885_start_dma(struct cx23885_tsport *port, |
| struct cx23885_dmaqueue *q, |
| struct cx23885_buffer *buf) |
| { |
| struct cx23885_dev *dev = port->dev; |
| u32 reg; |
| |
| dprintk(1, "%s() w: %d, h: %d, f: %d\n", __func__, |
| dev->width, dev->height, dev->field); |
| |
| /* Stop the fifo and risc engine for this port */ |
| cx_clear(port->reg_dma_ctl, port->dma_ctl_val); |
| |
| /* setup fifo + format */ |
| cx23885_sram_channel_setup(dev, |
| &dev->sram_channels[port->sram_chno], |
| port->ts_packet_size, buf->risc.dma); |
| if (debug > 5) { |
| cx23885_sram_channel_dump(dev, |
| &dev->sram_channels[port->sram_chno]); |
| cx23885_risc_disasm(port, &buf->risc); |
| } |
| |
| /* write TS length to chip */ |
| cx_write(port->reg_lngth, port->ts_packet_size); |
| |
| if ((!(cx23885_boards[dev->board].portb & CX23885_MPEG_DVB)) && |
| (!(cx23885_boards[dev->board].portc & CX23885_MPEG_DVB))) { |
| printk("%s() Unsupported .portb/c (0x%08x)/(0x%08x)\n", |
| __func__, |
| cx23885_boards[dev->board].portb, |
| cx23885_boards[dev->board].portc); |
| return -EINVAL; |
| } |
| |
| if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) |
| cx23885_av_clk(dev, 0); |
| |
| udelay(100); |
| |
| /* If the port supports SRC SELECT, configure it */ |
| if (port->reg_src_sel) |
| cx_write(port->reg_src_sel, port->src_sel_val); |
| |
| cx_write(port->reg_hw_sop_ctrl, port->hw_sop_ctrl_val); |
| cx_write(port->reg_ts_clk_en, port->ts_clk_en_val); |
| cx_write(port->reg_vld_misc, port->vld_misc_val); |
| cx_write(port->reg_gen_ctrl, port->gen_ctrl_val); |
| udelay(100); |
| |
| /* NOTE: this is 2 (reserved) for portb, does it matter? */ |
| /* reset counter to zero */ |
| cx_write(port->reg_gpcnt_ctl, 3); |
| q->count = 0; |
| |
| /* Set VIDB pins to input */ |
| if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) { |
| reg = cx_read(PAD_CTRL); |
| reg &= ~0x3; /* Clear TS1_OE & TS1_SOP_OE */ |
| cx_write(PAD_CTRL, reg); |
| } |
| |
| /* Set VIDC pins to input */ |
| if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) { |
| reg = cx_read(PAD_CTRL); |
| reg &= ~0x4; /* Clear TS2_SOP_OE */ |
| cx_write(PAD_CTRL, reg); |
| } |
| |
| if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) { |
| |
| reg = cx_read(PAD_CTRL); |
| reg = reg & ~0x1; /* Clear TS1_OE */ |
| |
| /* FIXME, bit 2 writing here is questionable */ |
| /* set TS1_SOP_OE and TS1_OE_HI */ |
| reg = reg | 0xa; |
| cx_write(PAD_CTRL, reg); |
| |
| /* FIXME and these two registers should be documented. */ |
| cx_write(CLK_DELAY, cx_read(CLK_DELAY) | 0x80000011); |
| cx_write(ALT_PIN_OUT_SEL, 0x10100045); |
| } |
| |
| switch (dev->bridge) { |
| case CX23885_BRIDGE_885: |
| case CX23885_BRIDGE_887: |
| case CX23885_BRIDGE_888: |
| /* enable irqs */ |
| dprintk(1, "%s() enabling TS int's and DMA\n", __func__); |
| cx_set(port->reg_ts_int_msk, port->ts_int_msk_val); |
| cx_set(port->reg_dma_ctl, port->dma_ctl_val); |
| cx23885_irq_add(dev, port->pci_irqmask); |
| cx23885_irq_enable_all(dev); |
| break; |
| default: |
| BUG(); |
| } |
| |
| cx_set(DEV_CNTRL2, (1<<5)); /* Enable RISC controller */ |
| |
| if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) |
| cx23885_av_clk(dev, 1); |
| |
| if (debug > 4) |
| cx23885_tsport_reg_dump(port); |
| |
| return 0; |
| } |
| |
| static int cx23885_stop_dma(struct cx23885_tsport *port) |
| { |
| struct cx23885_dev *dev = port->dev; |
| u32 reg; |
| |
| dprintk(1, "%s()\n", __func__); |
| |
| /* Stop interrupts and DMA */ |
| cx_clear(port->reg_ts_int_msk, port->ts_int_msk_val); |
| cx_clear(port->reg_dma_ctl, port->dma_ctl_val); |
| |
| if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) { |
| |
| reg = cx_read(PAD_CTRL); |
| |
| /* Set TS1_OE */ |
| reg = reg | 0x1; |
| |
| /* clear TS1_SOP_OE and TS1_OE_HI */ |
| reg = reg & ~0xa; |
| cx_write(PAD_CTRL, reg); |
| cx_write(port->reg_src_sel, 0); |
| cx_write(port->reg_gen_ctrl, 8); |
| |
| } |
| |
| if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) |
| cx23885_av_clk(dev, 0); |
| |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| int cx23885_buf_prepare(struct cx23885_buffer *buf, struct cx23885_tsport *port) |
| { |
| struct cx23885_dev *dev = port->dev; |
| int size = port->ts_packet_size * port->ts_packet_count; |
| struct sg_table *sgt = vb2_dma_sg_plane_desc(&buf->vb.vb2_buf, 0); |
| |
| dprintk(1, "%s: %p\n", __func__, buf); |
| if (vb2_plane_size(&buf->vb.vb2_buf, 0) < size) |
| return -EINVAL; |
| vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size); |
| |
| cx23885_risc_databuffer(dev->pci, &buf->risc, |
| sgt->sgl, |
| port->ts_packet_size, port->ts_packet_count, 0); |
| return 0; |
| } |
| |
| /* |
| * The risc program for each buffer works as follows: it starts with a simple |
| * 'JUMP to addr + 12', which is effectively a NOP. Then the code to DMA the |
| * buffer follows and at the end we have a JUMP back to the start + 12 (skipping |
| * the initial JUMP). |
| * |
| * This is the risc program of the first buffer to be queued if the active list |
| * is empty and it just keeps DMAing this buffer without generating any |
| * interrupts. |
| * |
| * If a new buffer is added then the initial JUMP in the code for that buffer |
| * will generate an interrupt which signals that the previous buffer has been |
| * DMAed successfully and that it can be returned to userspace. |
| * |
| * It also sets the final jump of the previous buffer to the start of the new |
| * buffer, thus chaining the new buffer into the DMA chain. This is a single |
| * atomic u32 write, so there is no race condition. |
| * |
| * The end-result of all this that you only get an interrupt when a buffer |
| * is ready, so the control flow is very easy. |
| */ |
| void cx23885_buf_queue(struct cx23885_tsport *port, struct cx23885_buffer *buf) |
| { |
| struct cx23885_buffer *prev; |
| struct cx23885_dev *dev = port->dev; |
| struct cx23885_dmaqueue *cx88q = &port->mpegq; |
| unsigned long flags; |
| |
| buf->risc.cpu[1] = cpu_to_le32(buf->risc.dma + 12); |
| buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_CNT_INC); |
| buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma + 12); |
| buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */ |
| |
| spin_lock_irqsave(&dev->slock, flags); |
| if (list_empty(&cx88q->active)) { |
| list_add_tail(&buf->queue, &cx88q->active); |
| dprintk(1, "[%p/%d] %s - first active\n", |
| buf, buf->vb.vb2_buf.index, __func__); |
| } else { |
| buf->risc.cpu[0] |= cpu_to_le32(RISC_IRQ1); |
| prev = list_entry(cx88q->active.prev, struct cx23885_buffer, |
| queue); |
| list_add_tail(&buf->queue, &cx88q->active); |
| prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); |
| dprintk(1, "[%p/%d] %s - append to active\n", |
| buf, buf->vb.vb2_buf.index, __func__); |
| } |
| spin_unlock_irqrestore(&dev->slock, flags); |
| } |
| |
| /* ----------------------------------------------------------- */ |
| |
| static void do_cancel_buffers(struct cx23885_tsport *port, char *reason) |
| { |
| struct cx23885_dev *dev = port->dev; |
| struct cx23885_dmaqueue *q = &port->mpegq; |
| struct cx23885_buffer *buf; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&port->slock, flags); |
| while (!list_empty(&q->active)) { |
| buf = list_entry(q->active.next, struct cx23885_buffer, |
| queue); |
| list_del(&buf->queue); |
| vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); |
| dprintk(1, "[%p/%d] %s - dma=0x%08lx\n", |
| buf, buf->vb.vb2_buf.index, reason, |
| (unsigned long)buf->risc.dma); |
| } |
| spin_unlock_irqrestore(&port->slock, flags); |
| } |
| |
| void cx23885_cancel_buffers(struct cx23885_tsport *port) |
| { |
| struct cx23885_dev *dev = port->dev; |
| |
| dprintk(1, "%s()\n", __func__); |
| cx23885_stop_dma(port); |
| do_cancel_buffers(port, "cancel"); |
| } |
| |
| int cx23885_irq_417(struct cx23885_dev *dev, u32 status) |
| { |
| /* FIXME: port1 assumption here. */ |
| struct cx23885_tsport *port = &dev->ts1; |
| int count = 0; |
| int handled = 0; |
| |
| if (status == 0) |
| return handled; |
| |
| count = cx_read(port->reg_gpcnt); |
| dprintk(7, "status: 0x%08x mask: 0x%08x count: 0x%x\n", |
| status, cx_read(port->reg_ts_int_msk), count); |
| |
| if ((status & VID_B_MSK_BAD_PKT) || |
| (status & VID_B_MSK_OPC_ERR) || |
| (status & VID_B_MSK_VBI_OPC_ERR) || |
| (status & VID_B_MSK_SYNC) || |
| (status & VID_B_MSK_VBI_SYNC) || |
| (status & VID_B_MSK_OF) || |
| (status & VID_B_MSK_VBI_OF)) { |
| printk(KERN_ERR "%s: V4L mpeg risc op code error, status " |
| "= 0x%x\n", dev->name, status); |
| if (status & VID_B_MSK_BAD_PKT) |
| dprintk(1, " VID_B_MSK_BAD_PKT\n"); |
| if (status & VID_B_MSK_OPC_ERR) |
| dprintk(1, " VID_B_MSK_OPC_ERR\n"); |
| if (status & VID_B_MSK_VBI_OPC_ERR) |
| dprintk(1, " VID_B_MSK_VBI_OPC_ERR\n"); |
| if (status & VID_B_MSK_SYNC) |
| dprintk(1, " VID_B_MSK_SYNC\n"); |
| if (status & VID_B_MSK_VBI_SYNC) |
| dprintk(1, " VID_B_MSK_VBI_SYNC\n"); |
| if (status & VID_B_MSK_OF) |
| dprintk(1, " VID_B_MSK_OF\n"); |
| if (status & VID_B_MSK_VBI_OF) |
| dprintk(1, " VID_B_MSK_VBI_OF\n"); |
| |
| cx_clear(port->reg_dma_ctl, port->dma_ctl_val); |
| cx23885_sram_channel_dump(dev, |
| &dev->sram_channels[port->sram_chno]); |
| cx23885_417_check_encoder(dev); |
| } else if (status & VID_B_MSK_RISCI1) { |
| dprintk(7, " VID_B_MSK_RISCI1\n"); |
| spin_lock(&port->slock); |
| cx23885_wakeup(port, &port->mpegq, count); |
| spin_unlock(&port->slock); |
| } |
| if (status) { |
| cx_write(port->reg_ts_int_stat, status); |
| handled = 1; |
| } |
| |
| return handled; |
| } |
| |
| static int cx23885_irq_ts(struct cx23885_tsport *port, u32 status) |
| { |
| struct cx23885_dev *dev = port->dev; |
| int handled = 0; |
| u32 count; |
| |
| if ((status & VID_BC_MSK_OPC_ERR) || |
| (status & VID_BC_MSK_BAD_PKT) || |
| (status & VID_BC_MSK_SYNC) || |
| (status & VID_BC_MSK_OF)) { |
| |
| if (status & VID_BC_MSK_OPC_ERR) |
| dprintk(7, " (VID_BC_MSK_OPC_ERR 0x%08x)\n", |
| VID_BC_MSK_OPC_ERR); |
| |
| if (status & VID_BC_MSK_BAD_PKT) |
| dprintk(7, " (VID_BC_MSK_BAD_PKT 0x%08x)\n", |
| VID_BC_MSK_BAD_PKT); |
| |
| if (status & VID_BC_MSK_SYNC) |
| dprintk(7, " (VID_BC_MSK_SYNC 0x%08x)\n", |
| VID_BC_MSK_SYNC); |
| |
| if (status & VID_BC_MSK_OF) |
| dprintk(7, " (VID_BC_MSK_OF 0x%08x)\n", |
| VID_BC_MSK_OF); |
| |
| printk(KERN_ERR "%s: mpeg risc op code error\n", dev->name); |
| |
| cx_clear(port->reg_dma_ctl, port->dma_ctl_val); |
| cx23885_sram_channel_dump(dev, |
| &dev->sram_channels[port->sram_chno]); |
| |
| } else if (status & VID_BC_MSK_RISCI1) { |
| |
| dprintk(7, " (RISCI1 0x%08x)\n", VID_BC_MSK_RISCI1); |
| |
| spin_lock(&port->slock); |
| count = cx_read(port->reg_gpcnt); |
| cx23885_wakeup(port, &port->mpegq, count); |
| spin_unlock(&port->slock); |
| |
| } |
| if (status) { |
| cx_write(port->reg_ts_int_stat, status); |
| handled = 1; |
| } |
| |
| return handled; |
| } |
| |
| static irqreturn_t cx23885_irq(int irq, void *dev_id) |
| { |
| struct cx23885_dev *dev = dev_id; |
| struct cx23885_tsport *ts1 = &dev->ts1; |
| struct cx23885_tsport *ts2 = &dev->ts2; |
| u32 pci_status, pci_mask; |
| u32 vida_status, vida_mask; |
| u32 audint_status, audint_mask; |
| u32 ts1_status, ts1_mask; |
| u32 ts2_status, ts2_mask; |
| int vida_count = 0, ts1_count = 0, ts2_count = 0, handled = 0; |
| int audint_count = 0; |
| bool subdev_handled; |
| |
| pci_status = cx_read(PCI_INT_STAT); |
| pci_mask = cx23885_irq_get_mask(dev); |
| vida_status = cx_read(VID_A_INT_STAT); |
| vida_mask = cx_read(VID_A_INT_MSK); |
| audint_status = cx_read(AUDIO_INT_INT_STAT); |
| audint_mask = cx_read(AUDIO_INT_INT_MSK); |
| ts1_status = cx_read(VID_B_INT_STAT); |
| ts1_mask = cx_read(VID_B_INT_MSK); |
| ts2_status = cx_read(VID_C_INT_STAT); |
| ts2_mask = cx_read(VID_C_INT_MSK); |
| |
| if ((pci_status == 0) && (ts2_status == 0) && (ts1_status == 0)) |
| goto out; |
| |
| vida_count = cx_read(VID_A_GPCNT); |
| audint_count = cx_read(AUD_INT_A_GPCNT); |
| ts1_count = cx_read(ts1->reg_gpcnt); |
| ts2_count = cx_read(ts2->reg_gpcnt); |
| dprintk(7, "pci_status: 0x%08x pci_mask: 0x%08x\n", |
| pci_status, pci_mask); |
| dprintk(7, "vida_status: 0x%08x vida_mask: 0x%08x count: 0x%x\n", |
| vida_status, vida_mask, vida_count); |
| dprintk(7, "audint_status: 0x%08x audint_mask: 0x%08x count: 0x%x\n", |
| audint_status, audint_mask, audint_count); |
| dprintk(7, "ts1_status: 0x%08x ts1_mask: 0x%08x count: 0x%x\n", |
| ts1_status, ts1_mask, ts1_count); |
| dprintk(7, "ts2_status: 0x%08x ts2_mask: 0x%08x count: 0x%x\n", |
| ts2_status, ts2_mask, ts2_count); |
| |
| if (pci_status & (PCI_MSK_RISC_RD | PCI_MSK_RISC_WR | |
| PCI_MSK_AL_RD | PCI_MSK_AL_WR | PCI_MSK_APB_DMA | |
| PCI_MSK_VID_C | PCI_MSK_VID_B | PCI_MSK_VID_A | |
| PCI_MSK_AUD_INT | PCI_MSK_AUD_EXT | |
| PCI_MSK_GPIO0 | PCI_MSK_GPIO1 | |
| PCI_MSK_AV_CORE | PCI_MSK_IR)) { |
| |
| if (pci_status & PCI_MSK_RISC_RD) |
| dprintk(7, " (PCI_MSK_RISC_RD 0x%08x)\n", |
| PCI_MSK_RISC_RD); |
| |
| if (pci_status & PCI_MSK_RISC_WR) |
| dprintk(7, " (PCI_MSK_RISC_WR 0x%08x)\n", |
| PCI_MSK_RISC_WR); |
| |
| if (pci_status & PCI_MSK_AL_RD) |
| dprintk(7, " (PCI_MSK_AL_RD 0x%08x)\n", |
| PCI_MSK_AL_RD); |
| |
| if (pci_status & PCI_MSK_AL_WR) |
| dprintk(7, " (PCI_MSK_AL_WR 0x%08x)\n", |
| PCI_MSK_AL_WR); |
| |
| if (pci_status & PCI_MSK_APB_DMA) |
| dprintk(7, " (PCI_MSK_APB_DMA 0x%08x)\n", |
| PCI_MSK_APB_DMA); |
| |
| if (pci_status & PCI_MSK_VID_C) |
| dprintk(7, " (PCI_MSK_VID_C 0x%08x)\n", |
| PCI_MSK_VID_C); |
| |
| if (pci_status & PCI_MSK_VID_B) |
| dprintk(7, " (PCI_MSK_VID_B 0x%08x)\n", |
| PCI_MSK_VID_B); |
| |
| if (pci_status & PCI_MSK_VID_A) |
| dprintk(7, " (PCI_MSK_VID_A 0x%08x)\n", |
| PCI_MSK_VID_A); |
| |
| if (pci_status & PCI_MSK_AUD_INT) |
| dprintk(7, " (PCI_MSK_AUD_INT 0x%08x)\n", |
| PCI_MSK_AUD_INT); |
| |
| if (pci_status & PCI_MSK_AUD_EXT) |
| dprintk(7, " (PCI_MSK_AUD_EXT 0x%08x)\n", |
| PCI_MSK_AUD_EXT); |
| |
| if (pci_status & PCI_MSK_GPIO0) |
| dprintk(7, " (PCI_MSK_GPIO0 0x%08x)\n", |
| PCI_MSK_GPIO0); |
| |
| if (pci_status & PCI_MSK_GPIO1) |
| dprintk(7, " (PCI_MSK_GPIO1 0x%08x)\n", |
| PCI_MSK_GPIO1); |
| |
| if (pci_status & PCI_MSK_AV_CORE) |
| dprintk(7, " (PCI_MSK_AV_CORE 0x%08x)\n", |
| PCI_MSK_AV_CORE); |
| |
| if (pci_status & PCI_MSK_IR) |
| dprintk(7, " (PCI_MSK_IR 0x%08x)\n", |
| PCI_MSK_IR); |
| } |
| |
| if (cx23885_boards[dev->board].ci_type == 1 && |
| (pci_status & (PCI_MSK_GPIO1 | PCI_MSK_GPIO0))) |
| handled += netup_ci_slot_status(dev, pci_status); |
| |
| if (cx23885_boards[dev->board].ci_type == 2 && |
| (pci_status & PCI_MSK_GPIO0)) |
| handled += altera_ci_irq(dev); |
| |
| if (ts1_status) { |
| if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) |
| handled += cx23885_irq_ts(ts1, ts1_status); |
| else |
| if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) |
| handled += cx23885_irq_417(dev, ts1_status); |
| } |
| |
| if (ts2_status) { |
| if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) |
| handled += cx23885_irq_ts(ts2, ts2_status); |
| else |
| if (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER) |
| handled += cx23885_irq_417(dev, ts2_status); |
| } |
| |
| if (vida_status) |
| handled += cx23885_video_irq(dev, vida_status); |
| |
| if (audint_status) |
| handled += cx23885_audio_irq(dev, audint_status, audint_mask); |
| |
| if (pci_status & PCI_MSK_IR) { |
| subdev_handled = false; |
| v4l2_subdev_call(dev->sd_ir, core, interrupt_service_routine, |
| pci_status, &subdev_handled); |
| if (subdev_handled) |
| handled++; |
| } |
| |
| if ((pci_status & pci_mask) & PCI_MSK_AV_CORE) { |
| cx23885_irq_disable(dev, PCI_MSK_AV_CORE); |
| schedule_work(&dev->cx25840_work); |
| handled++; |
| } |
| |
| if (handled) |
| cx_write(PCI_INT_STAT, pci_status); |
| out: |
| return IRQ_RETVAL(handled); |
| } |
| |
| static void cx23885_v4l2_dev_notify(struct v4l2_subdev *sd, |
| unsigned int notification, void *arg) |
| { |
| struct cx23885_dev *dev; |
| |
| if (sd == NULL) |
| return; |
| |
| dev = to_cx23885(sd->v4l2_dev); |
| |
| switch (notification) { |
| case V4L2_SUBDEV_IR_RX_NOTIFY: /* Possibly called in an IRQ context */ |
| if (sd == dev->sd_ir) |
| cx23885_ir_rx_v4l2_dev_notify(sd, *(u32 *)arg); |
| break; |
| case V4L2_SUBDEV_IR_TX_NOTIFY: /* Possibly called in an IRQ context */ |
| if (sd == dev->sd_ir) |
| cx23885_ir_tx_v4l2_dev_notify(sd, *(u32 *)arg); |
| break; |
| } |
| } |
| |
| static void cx23885_v4l2_dev_notify_init(struct cx23885_dev *dev) |
| { |
| INIT_WORK(&dev->cx25840_work, cx23885_av_work_handler); |
| INIT_WORK(&dev->ir_rx_work, cx23885_ir_rx_work_handler); |
| INIT_WORK(&dev->ir_tx_work, cx23885_ir_tx_work_handler); |
| dev->v4l2_dev.notify = cx23885_v4l2_dev_notify; |
| } |
| |
| static inline int encoder_on_portb(struct cx23885_dev *dev) |
| { |
| return cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER; |
| } |
| |
| static inline int encoder_on_portc(struct cx23885_dev *dev) |
| { |
| return cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER; |
| } |
| |
| /* Mask represents 32 different GPIOs, GPIO's are split into multiple |
| * registers depending on the board configuration (and whether the |
| * 417 encoder (wi it's own GPIO's) are present. Each GPIO bit will |
| * be pushed into the correct hardware register, regardless of the |
| * physical location. Certain registers are shared so we sanity check |
| * and report errors if we think we're tampering with a GPIo that might |
| * be assigned to the encoder (and used for the host bus). |
| * |
| * GPIO 2 thru 0 - On the cx23885 bridge |
| * GPIO 18 thru 3 - On the cx23417 host bus interface |
| * GPIO 23 thru 19 - On the cx25840 a/v core |
| */ |
| void cx23885_gpio_set(struct cx23885_dev *dev, u32 mask) |
| { |
| if (mask & 0x7) |
| cx_set(GP0_IO, mask & 0x7); |
| |
| if (mask & 0x0007fff8) { |
| if (encoder_on_portb(dev) || encoder_on_portc(dev)) |
| printk(KERN_ERR |
| "%s: Setting GPIO on encoder ports\n", |
| dev->name); |
| cx_set(MC417_RWD, (mask & 0x0007fff8) >> 3); |
| } |
| |
| /* TODO: 23-19 */ |
| if (mask & 0x00f80000) |
| printk(KERN_INFO "%s: Unsupported\n", dev->name); |
| } |
| |
| void cx23885_gpio_clear(struct cx23885_dev *dev, u32 mask) |
| { |
| if (mask & 0x00000007) |
| cx_clear(GP0_IO, mask & 0x7); |
| |
| if (mask & 0x0007fff8) { |
| if (encoder_on_portb(dev) || encoder_on_portc(dev)) |
| printk(KERN_ERR |
| "%s: Clearing GPIO moving on encoder ports\n", |
| dev->name); |
| cx_clear(MC417_RWD, (mask & 0x7fff8) >> 3); |
| } |
| |
| /* TODO: 23-19 */ |
| if (mask & 0x00f80000) |
| printk(KERN_INFO "%s: Unsupported\n", dev->name); |
| } |
| |
| u32 cx23885_gpio_get(struct cx23885_dev *dev, u32 mask) |
| { |
| if (mask & 0x00000007) |
| return (cx_read(GP0_IO) >> 8) & mask & 0x7; |
| |
| if (mask & 0x0007fff8) { |
| if (encoder_on_portb(dev) || encoder_on_portc(dev)) |
| printk(KERN_ERR |
| "%s: Reading GPIO moving on encoder ports\n", |
| dev->name); |
| return (cx_read(MC417_RWD) & ((mask & 0x7fff8) >> 3)) << 3; |
| } |
| |
| /* TODO: 23-19 */ |
| if (mask & 0x00f80000) |
| printk(KERN_INFO "%s: Unsupported\n", dev->name); |
| |
| return 0; |
| } |
| |
| void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput) |
| { |
| if ((mask & 0x00000007) && asoutput) |
| cx_set(GP0_IO, (mask & 0x7) << 16); |
| else if ((mask & 0x00000007) && !asoutput) |
| cx_clear(GP0_IO, (mask & 0x7) << 16); |
| |
| if (mask & 0x0007fff8) { |
| if (encoder_on_portb(dev) || encoder_on_portc(dev)) |
| printk(KERN_ERR |
| "%s: Enabling GPIO on encoder ports\n", |
| dev->name); |
| } |
| |
| /* MC417_OEN is active low for output, write 1 for an input */ |
| if ((mask & 0x0007fff8) && asoutput) |
| cx_clear(MC417_OEN, (mask & 0x7fff8) >> 3); |
| |
| else if ((mask & 0x0007fff8) && !asoutput) |
| cx_set(MC417_OEN, (mask & 0x7fff8) >> 3); |
| |
| /* TODO: 23-19 */ |
| } |
| |
| static int cx23885_initdev(struct pci_dev *pci_dev, |
| const struct pci_device_id *pci_id) |
| { |
| struct cx23885_dev *dev; |
| struct v4l2_ctrl_handler *hdl; |
| int err; |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (NULL == dev) |
| return -ENOMEM; |
| |
| err = v4l2_device_register(&pci_dev->dev, &dev->v4l2_dev); |
| if (err < 0) |
| goto fail_free; |
| |
| hdl = &dev->ctrl_handler; |
| v4l2_ctrl_handler_init(hdl, 6); |
| if (hdl->error) { |
| err = hdl->error; |
| goto fail_ctrl; |
| } |
| dev->v4l2_dev.ctrl_handler = hdl; |
| |
| /* Prepare to handle notifications from subdevices */ |
| cx23885_v4l2_dev_notify_init(dev); |
| |
| /* pci init */ |
| dev->pci = pci_dev; |
| if (pci_enable_device(pci_dev)) { |
| err = -EIO; |
| goto fail_ctrl; |
| } |
| |
| if (cx23885_dev_setup(dev) < 0) { |
| err = -EINVAL; |
| goto fail_ctrl; |
| } |
| |
| /* print pci info */ |
| dev->pci_rev = pci_dev->revision; |
| pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat); |
| printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, " |
| "latency: %d, mmio: 0x%llx\n", dev->name, |
| pci_name(pci_dev), dev->pci_rev, pci_dev->irq, |
| dev->pci_lat, |
| (unsigned long long)pci_resource_start(pci_dev, 0)); |
| |
| pci_set_master(pci_dev); |
| err = pci_set_dma_mask(pci_dev, 0xffffffff); |
| if (err) { |
| printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name); |
| goto fail_context; |
| } |
| |
| dev->alloc_ctx = vb2_dma_sg_init_ctx(&pci_dev->dev); |
| if (IS_ERR(dev->alloc_ctx)) { |
| err = PTR_ERR(dev->alloc_ctx); |
| goto fail_context; |
| } |
| err = request_irq(pci_dev->irq, cx23885_irq, |
| IRQF_SHARED, dev->name, dev); |
| if (err < 0) { |
| printk(KERN_ERR "%s: can't get IRQ %d\n", |
| dev->name, pci_dev->irq); |
| goto fail_irq; |
| } |
| |
| switch (dev->board) { |
| case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: |
| cx23885_irq_add_enable(dev, PCI_MSK_GPIO1 | PCI_MSK_GPIO0); |
| break; |
| case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: |
| cx23885_irq_add_enable(dev, PCI_MSK_GPIO0); |
| break; |
| } |
| |
| /* |
| * The CX2388[58] IR controller can start firing interrupts when |
| * enabled, so these have to take place after the cx23885_irq() handler |
| * is hooked up by the call to request_irq() above. |
| */ |
| cx23885_ir_pci_int_enable(dev); |
| cx23885_input_init(dev); |
| |
| return 0; |
| |
| fail_irq: |
| vb2_dma_sg_cleanup_ctx(dev->alloc_ctx); |
| fail_context: |
| cx23885_dev_unregister(dev); |
| fail_ctrl: |
| v4l2_ctrl_handler_free(hdl); |
| v4l2_device_unregister(&dev->v4l2_dev); |
| fail_free: |
| kfree(dev); |
| return err; |
| } |
| |
| static void cx23885_finidev(struct pci_dev *pci_dev) |
| { |
| struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); |
| struct cx23885_dev *dev = to_cx23885(v4l2_dev); |
| |
| cx23885_input_fini(dev); |
| cx23885_ir_fini(dev); |
| |
| cx23885_shutdown(dev); |
| |
| /* unregister stuff */ |
| free_irq(pci_dev->irq, dev); |
| |
| pci_disable_device(pci_dev); |
| |
| cx23885_dev_unregister(dev); |
| vb2_dma_sg_cleanup_ctx(dev->alloc_ctx); |
| v4l2_ctrl_handler_free(&dev->ctrl_handler); |
| v4l2_device_unregister(v4l2_dev); |
| kfree(dev); |
| } |
| |
| static struct pci_device_id cx23885_pci_tbl[] = { |
| { |
| /* CX23885 */ |
| .vendor = 0x14f1, |
| .device = 0x8852, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| }, { |
| /* CX23887 Rev 2 */ |
| .vendor = 0x14f1, |
| .device = 0x8880, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| }, { |
| /* --- end of list --- */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(pci, cx23885_pci_tbl); |
| |
| static struct pci_driver cx23885_pci_driver = { |
| .name = "cx23885", |
| .id_table = cx23885_pci_tbl, |
| .probe = cx23885_initdev, |
| .remove = cx23885_finidev, |
| /* TODO */ |
| .suspend = NULL, |
| .resume = NULL, |
| }; |
| |
| static int __init cx23885_init(void) |
| { |
| printk(KERN_INFO "cx23885 driver version %s loaded\n", |
| CX23885_VERSION); |
| return pci_register_driver(&cx23885_pci_driver); |
| } |
| |
| static void __exit cx23885_fini(void) |
| { |
| pci_unregister_driver(&cx23885_pci_driver); |
| } |
| |
| module_init(cx23885_init); |
| module_exit(cx23885_fini); |