| * NXP PNX I2C Controller |
| |
| Required properties: |
| |
| - reg: Offset and length of the register set for the device |
| - compatible: should be "nxp,pnx-i2c" |
| - interrupts: configure one interrupt line |
| - #address-cells: always 1 (for i2c addresses) |
| - #size-cells: always 0 |
| - interrupt-parent: the phandle for the interrupt controller that |
| services interrupts for this device. |
| |
| Optional properties: |
| |
| - clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz |
| |
| Examples: |
| |
| i2c1: i2c@400a0000 { |
| compatible = "nxp,pnx-i2c"; |
| reg = <0x400a0000 0x100>; |
| interrupt-parent = <&mic>; |
| interrupts = <51 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c2: i2c@400a8000 { |
| compatible = "nxp,pnx-i2c"; |
| reg = <0x400a8000 0x100>; |
| interrupt-parent = <&mic>; |
| interrupts = <50 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-frequency = <100000>; |
| }; |
