| NXP I2C controller for LPC2xxx/178x/18xx/43xx |
| |
| Required properties: |
| - compatible: must be "nxp,lpc1788-i2c" |
| - reg: physical address and length of the device registers |
| - interrupts: a single interrupt specifier |
| - clocks: clock for the device |
| - #address-cells: should be <1> |
| - #size-cells: should be <0> |
| |
| Optional properties: |
| - clock-frequency: the desired I2C bus clock frequency in Hz; in |
| absence of this property the default value is used (100 kHz). |
| |
| Example: |
| i2c0: i2c@400a1000 { |
| compatible = "nxp,lpc1788-i2c"; |
| reg = <0x400a1000 0x1000>; |
| interrupts = <18>; |
| clocks = <&ccu1 CLK_APB1_I2C0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| &i2c0 { |
| clock-frequency = <400000>; |
| |
| lm75@48 { |
| compatible = "nxp,lm75"; |
| reg = <0x48>; |
| }; |
| }; |
| |
