| /* |
| * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology |
| * Author: Fuxin Zhang, zhangfx@lemote.com |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| #include <linux/pci.h> |
| |
| #include <pci.h> |
| #include <loongson.h> |
| #include <boot_param.h> |
| |
| static struct resource loongson_pci_mem_resource = { |
| .name = "pci memory space", |
| .start = LOONGSON_PCI_MEM_START, |
| .end = LOONGSON_PCI_MEM_END, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| static struct resource loongson_pci_io_resource = { |
| .name = "pci io space", |
| .start = LOONGSON_PCI_IO_START, |
| .end = IO_SPACE_LIMIT, |
| .flags = IORESOURCE_IO, |
| }; |
| |
| static struct pci_controller loongson_pci_controller = { |
| .pci_ops = &loongson_pci_ops, |
| .io_resource = &loongson_pci_io_resource, |
| .mem_resource = &loongson_pci_mem_resource, |
| .mem_offset = 0x00000000UL, |
| .io_offset = 0x00000000UL, |
| }; |
| |
| static void __init setup_pcimap(void) |
| { |
| /* |
| * local to PCI mapping for CPU accessing PCI space |
| * CPU address space [256M,448M] is window for accessing pci space |
| * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M] |
| * |
| * pcimap: PCI_MAP2 PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0 |
| * [<2G] [384M,448M] [320M,384M] [0M,64M] |
| */ |
| LOONGSON_PCIMAP = LOONGSON_PCIMAP_PCIMAP_2 | |
| LOONGSON_PCIMAP_WIN(2, LOONGSON_PCILO2_BASE) | |
| LOONGSON_PCIMAP_WIN(1, LOONGSON_PCILO1_BASE) | |
| LOONGSON_PCIMAP_WIN(0, 0); |
| |
| /* |
| * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M] |
| */ |
| LOONGSON_PCIBASE0 = 0x80000000ul; /* base: 2G -> mmap: 0M */ |
| /* size: 256M, burst transmission, pre-fetch enable, 64bit */ |
| LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul; |
| LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful; |
| LOONGSON_PCI_HIT1_SEL_L = 0x00000006ul; /* set this BAR as invalid */ |
| LOONGSON_PCI_HIT1_SEL_H = 0x00000000ul; |
| LOONGSON_PCI_HIT2_SEL_L = 0x00000006ul; /* set this BAR as invalid */ |
| LOONGSON_PCI_HIT2_SEL_H = 0x00000000ul; |
| |
| /* avoid deadlock of PCI reading/writing lock operation */ |
| LOONGSON_PCI_ISR4C = 0xd2000001ul; |
| |
| /* can not change gnt to break pci transfer when device's gnt not |
| deassert for some broken device */ |
| LOONGSON_PXARB_CFG = 0x00fe0105ul; |
| |
| #ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG |
| /* |
| * set cpu addr window2 to map CPU address space to PCI address space |
| */ |
| LOONGSON_ADDRWIN_CPUTOPCI(ADDRWIN_WIN2, LOONGSON_CPU_MEM_SRC, |
| LOONGSON_PCI_MEM_DST, MMAP_CPUTOPCI_SIZE); |
| #endif |
| } |
| |
| extern int sbx00_acpi_init(void); |
| |
| static int __init pcibios_init(void) |
| { |
| setup_pcimap(); |
| |
| loongson_pci_controller.io_map_base = mips_io_port_base; |
| #ifdef CONFIG_LEFI_FIRMWARE_INTERFACE |
| loongson_pci_mem_resource.start = loongson_sysconf.pci_mem_start_addr; |
| loongson_pci_mem_resource.end = loongson_sysconf.pci_mem_end_addr; |
| #endif |
| register_pci_controller(&loongson_pci_controller); |
| |
| #ifdef CONFIG_CPU_LOONGSON3 |
| sbx00_acpi_init(); |
| #endif |
| |
| return 0; |
| } |
| |
| arch_initcall(pcibios_init); |