| /* |
| * SA-1101.h |
| * |
| * Copyright (c) Peter Danielsson 1999 |
| * |
| * Definition of constants related to the sa1101 |
| * support chip for the sa1100 |
| * |
| */ |
| |
| |
| /* Be sure that virtual mapping is defined right */ |
| #ifndef __ASM_ARCH_HARDWARE_H |
| #error You must include hardware.h not SA-1101.h |
| #endif |
| |
| #ifndef SA1101_BASE |
| #error You must define SA-1101 physical base address |
| #endif |
| |
| #ifndef LANGUAGE |
| # ifdef __ASSEMBLY__ |
| # define LANGUAGE Assembly |
| # else |
| # define LANGUAGE C |
| # endif |
| #endif |
| |
| /* |
| * We have mapped the sa1101 depending on the value of SA1101_BASE. |
| * It then appears from 0xf4000000. |
| */ |
| |
| #define SA1101_p2v( x ) ((x) - SA1101_BASE + 0xf4000000) |
| #define SA1101_v2p( x ) ((x) - 0xf4000000 + SA1101_BASE) |
| |
| #ifndef SA1101_p2v |
| #define SA1101_p2v(PhAdd) (PhAdd) |
| #endif |
| |
| #include <mach/bitfield.h> |
| |
| #define C 0 |
| #define Assembly 1 |
| |
| |
| /* |
| * Memory map |
| */ |
| |
| #define __SHMEM_CONTROL0 0x00000000 |
| #define __SYSTEM_CONTROL1 0x00000400 |
| #define __ARBITER 0x00020000 |
| #define __SYSTEM_CONTROL2 0x00040000 |
| #define __SYSTEM_CONTROL3 0x00060000 |
| #define __PARALLEL_PORT 0x00080000 |
| #define __VIDMEM_CONTROL 0x00100000 |
| #define __UPDATE_FIFO 0x00120000 |
| #define __SHMEM_CONTROL1 0x00140000 |
| #define __INTERRUPT_CONTROL 0x00160000 |
| #define __USB_CONTROL 0x00180000 |
| #define __TRACK_INTERFACE 0x001a0000 |
| #define __MOUSE_INTERFACE 0x001b0000 |
| #define __KEYPAD_INTERFACE 0x001c0000 |
| #define __PCMCIA_INTERFACE 0x001e0000 |
| #define __VGA_CONTROL 0x00200000 |
| #define __GPIO_INTERFACE 0x00300000 |
| |
| /* |
| * Macro that calculates real address for registers in the SA-1101 |
| */ |
| |
| #define _SA1101( x ) ((x) + SA1101_BASE) |
| |
| /* |
| * Interface and shared memory controller registers |
| * |
| * Registers |
| * SKCR SA-1101 control register (read/write) |
| * SMCR Shared Memory Controller Register |
| * SNPR Snoop Register |
| */ |
| |
| #define _SKCR _SA1101( 0x00000000 ) /* SA-1101 Control Reg. */ |
| #define _SMCR _SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */ |
| #define _SNPR _SA1101( 0x00140400 ) /* Snoop Reg. */ |
| |
| #if LANGUAGE == C |
| #define SKCR (*((volatile Word *) SA1101_p2v (_SKCR))) |
| #define SMCR (*((volatile Word *) SA1101_p2v (_SMCR))) |
| #define SNPR (*((volatile Word *) SA1101_p2v (_SNPR))) |
| |
| #define SKCR_PLLEn 0x0001 /* Enable On-Chip PLL */ |
| #define SKCR_BCLKEn 0x0002 /* Enables BCLK */ |
| #define SKCR_Sleep 0x0004 /* Sleep Mode */ |
| #define SKCR_IRefEn 0x0008 /* DAC Iref input enable */ |
| #define SKCR_VCOON 0x0010 /* VCO bias */ |
| #define SKCR_ScanTestEn 0x0020 /* Enables scan test */ |
| #define SKCR_ClockTestEn 0x0040 /* Enables clock test */ |
| |
| #define SMCR_DCAC Fld(2,0) /* Number of column address bits */ |
| #define SMCR_DRAC Fld(2,2) /* Number of row address bits */ |
| #define SMCR_ArbiterBias 0x0008 /* favor video or USB */ |
| #define SMCR_TopVidMem Fld(4,5) /* Top 4 bits of vidmem addr. */ |
| |
| #define SMCR_ColAdrBits( x ) /* col. addr bits 8..11 */ \ |
| (( (x) - 8 ) << FShft (SMCR_DCAC)) |
| #define SMCR_RowAdrBits( x ) /* row addr bits 9..12 */\ |
| (( (x) - 9 ) << FShft (SMCR_DRAC)) |
| |
| #define SNPR_VFBstart Fld(12,0) /* Video frame buffer addr */ |
| #define SNPR_VFBsize Fld(11,12) /* Video frame buffer size */ |
| #define SNPR_WholeBank (1 << 23) /* Whole bank bit */ |
| #define SNPR_BankSelect Fld(2,27) /* Bank select */ |
| #define SNPR_SnoopEn (1 << 31) /* Enable snoop operation */ |
| |
| #define SNPR_Set_VFBsize( x ) /* set frame buffer size (in kb) */ \ |
| ( (x) << FShft (SNPR_VFBsize)) |
| #define SNPR_Select_Bank(x) /* select bank 0 or 1 */ \ |
| (( (x) + 1 ) << FShft (SNPR_BankSelect )) |
| |
| #endif /* LANGUAGE == C */ |
| |
| /* |
| * Video Memory Controller |
| * |
| * Registers |
| * VMCCR Configuration register |
| * VMCAR VMC address register |
| * VMCDR VMC data register |
| * |
| */ |
| |
| #define _VMCCR _SA1101( 0x00100000 ) /* Configuration register */ |
| #define _VMCAR _SA1101( 0x00101000 ) /* VMC address register */ |
| #define _VMCDR _SA1101( 0x00101400 ) /* VMC data register */ |
| |
| #if LANGUAGE == C |
| #define VMCCR (*((volatile Word *) SA1101_p2v (_VMCCR))) |
| #define VMCAR (*((volatile Word *) SA1101_p2v (_VMCAR))) |
| #define VMCDR (*((volatile Word *) SA1101_p2v (_VMCDR))) |
| |
| #define VMCCR_RefreshEn 0x0000 /* Enable memory refresh */ |
| #define VMCCR_Config 0x0001 /* DRAM size */ |
| #define VMCCR_RefPeriod Fld(2,3) /* Refresh period */ |
| #define VMCCR_StaleDataWait Fld(4,5) /* Stale FIFO data timeout counter */ |
| #define VMCCR_SleepState (1<<9) /* State of interface pins in sleep*/ |
| #define VMCCR_RefTest (1<<10) /* refresh test */ |
| #define VMCCR_RefLow Fld(6,11) /* refresh low counter */ |
| #define VMCCR_RefHigh Fld(7,17) /* refresh high counter */ |
| #define VMCCR_SDTCTest Fld(7,24) /* stale data timeout counter */ |
| #define VMCCR_ForceSelfRef (1<<31) /* Force self refresh */ |
| |
| #endif LANGUAGE == C |
| |
| |
| /* Update FIFO |
| * |
| * Registers |
| * UFCR Update FIFO Control Register |
| * UFSR Update FIFO Status Register |
| * UFLVLR update FIFO level register |
| * UFDR update FIFO data register |
| */ |
| |
| #define _UFCR _SA1101(0x00120000) /* Update FIFO Control Reg. */ |
| #define _UFSR _SA1101(0x00120400) /* Update FIFO Status Reg. */ |
| #define _UFLVLR _SA1101(0x00120800) /* Update FIFO level reg. */ |
| #define _UFDR _SA1101(0x00120c00) /* Update FIFO data reg. */ |
| |
| #if LANGUAGE == C |
| |
| #define UFCR (*((volatile Word *) SA1101_p2v (_UFCR))) |
| #define UFSR (*((volatile Word *) SA1101_p2v (_UFSR))) |
| #define UFLVLR (*((volatile Word *) SA1101_p2v (_UFLVLR))) |
| #define UFDR (*((volatile Word *) SA1101_p2v (_UFDR))) |
| |
| |
| #define UFCR_FifoThreshhold Fld(7,0) /* Level for FifoGTn flag */ |
| |
| #define UFSR_FifoGTnFlag 0x01 /* FifoGTn flag */#define UFSR_FifoEmpty 0x80 /* FIFO is empty */ |
| |
| #endif /* LANGUAGE == C */ |
| |
| /* System Controller |
| * |
| * Registers |
| * SKPCR Power Control Register |
| * SKCDR Clock Divider Register |
| * DACDR1 DAC1 Data register |
| * DACDR2 DAC2 Data register |
| */ |
| |
| #define _SKPCR _SA1101(0x00000400) |
| #define _SKCDR _SA1101(0x00040000) |
| #define _DACDR1 _SA1101(0x00060000) |
| #define _DACDR2 _SA1101(0x00060400) |
| |
| #if LANGUAGE == C |
| #define SKPCR (*((volatile Word *) SA1101_p2v (_SKPCR))) |
| #define SKCDR (*((volatile Word *) SA1101_p2v (_SKCDR))) |
| #define DACDR1 (*((volatile Word *) SA1101_p2v (_DACDR1))) |
| #define DACDR2 (*((volatile Word *) SA1101_p2v (_DACDR2))) |
| |
| #define SKPCR_UCLKEn 0x01 /* USB Enable */ |
| #define SKPCR_PCLKEn 0x02 /* PS/2 Enable */ |
| #define SKPCR_ICLKEn 0x04 /* Interrupt Controller Enable */ |
| #define SKPCR_VCLKEn 0x08 /* Video Controller Enable */ |
| #define SKPCR_PICLKEn 0x10 /* parallel port Enable */ |
| #define SKPCR_DCLKEn 0x20 /* DACs Enable */ |
| #define SKPCR_nKPADEn 0x40 /* Multiplexer */ |
| |
| #define SKCDR_PLLMul Fld(7,0) /* PLL Multiplier */ |
| #define SKCDR_VCLKEn Fld(2,7) /* Video controller clock divider */ |
| #define SKDCR_BCLKEn (1<<9) /* BCLK Divider */ |
| #define SKDCR_UTESTCLKEn (1<<10) /* Route USB clock during test mode */ |
| #define SKDCR_DivRValue Fld(6,11) /* Input clock divider for PLL */ |
| #define SKDCR_DivNValue Fld(5,17) /* Output clock divider for PLL */ |
| #define SKDCR_PLLRSH Fld(3,22) /* PLL bandwidth control */ |
| #define SKDCR_ChargePump (1<<25) /* Charge pump control */ |
| #define SKDCR_ClkTestMode (1<<26) /* Clock output test mode */ |
| #define SKDCR_ClkTestEn (1<<27) /* Test clock generator */ |
| #define SKDCR_ClkJitterCntl Fld(3,28) /* video clock jitter compensation */ |
| |
| #define DACDR_DACCount Fld(8,0) /* Count value */ |
| #define DACDR1_DACCount DACDR_DACCount |
| #define DACDR2_DACCount DACDR_DACCount |
| |
| #endif /* LANGUAGE == C */ |
| |
| /* |
| * Parallel Port Interface |
| * |
| * Registers |
| * IEEE_Config IEEE mode selection and programmable attributes |
| * IEEE_Control Controls the states of IEEE port control outputs |
| * IEEE_Data Forward transfer data register |
| * IEEE_Addr Forward transfer address register |
| * IEEE_Status Port IO signal status register |
| * IEEE_IntStatus Port interrupts status register |
| * IEEE_FifoLevels Rx and Tx FIFO interrupt generation levels |
| * IEEE_InitTime Forward timeout counter initial value |
| * IEEE_TimerStatus Forward timeout counter current value |
| * IEEE_FifoReset Reset forward transfer FIFO |
| * IEEE_ReloadValue Counter reload value |
| * IEEE_TestControl Control testmode |
| * IEEE_TestDataIn Test data register |
| * IEEE_TestDataInEn Enable test data |
| * IEEE_TestCtrlIn Test control signals |
| * IEEE_TestCtrlInEn Enable test control signals |
| * IEEE_TestDataStat Current data bus value |
| * |
| */ |
| |
| /* |
| * The control registers are defined as offsets from a base address |
| */ |
| |
| #define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT ) |
| |
| #define _IEEE_Config _IEEE( 0x0000 ) |
| #define _IEEE_Control _IEEE( 0x0400 ) |
| #define _IEEE_Data _IEEE( 0x4000 ) |
| #define _IEEE_Addr _IEEE( 0x0800 ) |
| #define _IEEE_Status _IEEE( 0x0c00 ) |
| #define _IEEE_IntStatus _IEEE( 0x1000 ) |
| #define _IEEE_FifoLevels _IEEE( 0x1400 ) |
| #define _IEEE_InitTime _IEEE( 0x1800 ) |
| #define _IEEE_TimerStatus _IEEE( 0x1c00 ) |
| #define _IEEE_FifoReset _IEEE( 0x2000 ) |
| #define _IEEE_ReloadValue _IEEE( 0x3c00 ) |
| #define _IEEE_TestControl _IEEE( 0x2400 ) |
| #define _IEEE_TestDataIn _IEEE( 0x2800 ) |
| #define _IEEE_TestDataInEn _IEEE( 0x2c00 ) |
| #define _IEEE_TestCtrlIn _IEEE( 0x3000 ) |
| #define _IEEE_TestCtrlInEn _IEEE( 0x3400 ) |
| #define _IEEE_TestDataStat _IEEE( 0x3800 ) |
| |
| |
| #if LANGUAGE == C |
| #define IEEE_Config (*((volatile Word *) SA1101_p2v (_IEEE_Config))) |
| #define IEEE_Control (*((volatile Word *) SA1101_p2v (_IEEE_Control))) |
| #define IEEE_Data (*((volatile Word *) SA1101_p2v (_IEEE_Data))) |
| #define IEEE_Addr (*((volatile Word *) SA1101_p2v (_IEEE_Addr))) |
| #define IEEE_Status (*((volatile Word *) SA1101_p2v (_IEEE_Status))) |
| #define IEEE_IntStatus (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus))) |
| #define IEEE_FifoLevels (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels))) |
| #define IEEE_InitTime (*((volatile Word *) SA1101_p2v (_IEEE_InitTime))) |
| #define IEEE_TimerStatus (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus))) |
| #define IEEE_FifoReset (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset))) |
| #define IEEE_ReloadValue (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue))) |
| #define IEEE_TestControl (*((volatile Word *) SA1101_p2v (_IEEE_TestControl))) |
| #define IEEE_TestDataIn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn))) |
| #define IEEE_TestDataInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn))) |
| #define IEEE_TestCtrlIn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn))) |
| #define IEEE_TestCtrlInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn))) |
| #define IEEE_TestDataStat (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat))) |
| |
| |
| #define IEEE_Config_M Fld(3,0) /* Mode select */ |
| #define IEEE_Config_D 0x04 /* FIFO access enable */ |
| #define IEEE_Config_B 0x08 /* 9-bit word enable */ |
| #define IEEE_Config_T 0x10 /* Data transfer enable */ |
| #define IEEE_Config_A 0x20 /* Data transfer direction */ |
| #define IEEE_Config_E 0x40 /* Timer enable */ |
| #define IEEE_Control_A 0x08 /* AutoFd output */ |
| #define IEEE_Control_E 0x04 /* Selectin output */ |
| #define IEEE_Control_T 0x02 /* Strobe output */ |
| #define IEEE_Control_I 0x01 /* Port init output */ |
| #define IEEE_Data_C (1<<31) /* Byte count */ |
| #define IEEE_Data_Db Fld(9,16) /* Data byte 2 */ |
| #define IEEE_Data_Da Fld(9,0) /* Data byte 1 */ |
| #define IEEE_Addr_A Fld(8,0) /* forward address transfer byte */ |
| #define IEEE_Status_A 0x0100 /* nAutoFd port output status */ |
| #define IEEE_Status_E 0x0080 /* nSelectIn port output status */ |
| #define IEEE_Status_T 0x0040 /* nStrobe port output status */ |
| #define IEEE_Status_I 0x0020 /* nInit port output status */ |
| #define IEEE_Status_B 0x0010 /* Busy port inout status */ |
| #define IEEE_Status_S 0x0008 /* Select port input status */ |
| #define IEEE_Status_K 0x0004 /* nAck port input status */ |
| #define IEEE_Status_F 0x0002 /* nFault port input status */ |
| #define IEEE_Status_R 0x0001 /* pError port input status */ |
| |
| #define IEEE_IntStatus_IntReqDat 0x0100 |
| #define IEEE_IntStatus_IntReqEmp 0x0080 |
| #define IEEE_IntStatus_IntReqInt 0x0040 |
| #define IEEE_IntStatus_IntReqRav 0x0020 |
| #define IEEE_IntStatus_IntReqTim 0x0010 |
| #define IEEE_IntStatus_RevAddrComp 0x0008 |
| #define IEEE_IntStatus_RevDataComp 0x0004 |
| #define IEEE_IntStatus_FwdAddrComp 0x0002 |
| #define IEEE_IntStatus_FwdDataComp 0x0001 |
| #define IEEE_FifoLevels_RevFifoLevel 2 |
| #define IEEE_FifoLevels_FwdFifoLevel 1 |
| #define IEEE_InitTime_TimValInit Fld(22,0) |
| #define IEEE_TimerStatus_TimValStat Fld(22,0) |
| #define IEEE_ReloadValue_Reload Fld(4,0) |
| |
| #define IEEE_TestControl_RegClk 0x04 |
| #define IEEE_TestControl_ClockSelect Fld(2,1) |
| #define IEEE_TestControl_TimerTestModeEn 0x01 |
| #define IEEE_TestCtrlIn_PError 0x10 |
| #define IEEE_TestCtrlIn_nFault 0x08 |
| #define IEEE_TestCtrlIn_nAck 0x04 |
| #define IEEE_TestCtrlIn_PSel 0x02 |
| #define IEEE_TestCtrlIn_Busy 0x01 |
| |
| #endif /* LANGUAGE == C */ |
| |
| /* |
| * VGA Controller |
| * |
| * Registers |
| * VideoControl Video Control Register |
| * VgaTiming0 VGA Timing Register 0 |
| * VgaTiming1 VGA Timing Register 1 |
| * VgaTiming2 VGA Timing Register 2 |
| * VgaTiming3 VGA Timing Register 3 |
| * VgaBorder VGA Border Color Register |
| * VgaDBAR VGADMA Base Address Register |
| * VgaDCAR VGADMA Channel Current Address Register |
| * VgaStatus VGA Status Register |
| * VgaInterruptMask VGA Interrupt Mask Register |
| * VgaPalette VGA Palette Registers |
| * DacControl DAC Control Register |
| * VgaTest VGA Controller Test Register |
| */ |
| |
| #define _VGA( x ) _SA1101( ( x ) + __VGA_CONTROL ) |
| |
| #define _VideoControl _VGA( 0x0000 ) |
| #define _VgaTiming0 _VGA( 0x0400 ) |
| #define _VgaTiming1 _VGA( 0x0800 ) |
| #define _VgaTiming2 _VGA( 0x0c00 ) |
| #define _VgaTiming3 _VGA( 0x1000 ) |
| #define _VgaBorder _VGA( 0x1400 ) |
| #define _VgaDBAR _VGA( 0x1800 ) |
| #define _VgaDCAR _VGA( 0x1c00 ) |
| #define _VgaStatus _VGA( 0x2000 ) |
| #define _VgaInterruptMask _VGA( 0x2400 ) |
| #define _VgaPalette _VGA( 0x40000 ) |
| #define _DacControl _VGA( 0x3000 ) |
| #define _VgaTest _VGA( 0x2c00 ) |
| |
| #if (LANGUAGE == C) |
| #define VideoControl (*((volatile Word *) SA1101_p2v (_VideoControl))) |
| #define VgaTiming0 (*((volatile Word *) SA1101_p2v (_VgaTiming0))) |
| #define VgaTiming1 (*((volatile Word *) SA1101_p2v (_VgaTiming1))) |
| #define VgaTiming2 (*((volatile Word *) SA1101_p2v (_VgaTiming2))) |
| #define VgaTiming3 (*((volatile Word *) SA1101_p2v (_VgaTiming3))) |
| #define VgaBorder (*((volatile Word *) SA1101_p2v (_VgaBorder))) |
| #define VgaDBAR (*((volatile Word *) SA1101_p2v (_VgaDBAR))) |
| #define VgaDCAR (*((volatile Word *) SA1101_p2v (_VgaDCAR))) |
| #define VgaStatus (*((volatile Word *) SA1101_p2v (_VgaStatus))) |
| #define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask))) |
| #define VgaPalette (*((volatile Word *) SA1101_p2v (_VgaPalette))) |
| #define DacControl (*((volatile Word *) SA1101_p2v (_DacControl))) |
| #define VgaTest (*((volatile Word *) SA1101_p2v (_VgaTest))) |
| |
| #define VideoControl_VgaEn 0x00000000 |
| #define VideoControl_BGR 0x00000001 |
| #define VideoControl_VCompVal Fld(2,2) |
| #define VideoControl_VgaReq Fld(4,4) |
| #define VideoControl_VBurstL Fld(4,8) |
| #define VideoControl_VMode (1<<12) |
| #define VideoControl_PalRead (1<<13) |
| |
| #define VgaTiming0_PPL Fld(6,2) |
| #define VgaTiming0_HSW Fld(8,8) |
| #define VgaTiming0_HFP Fld(8,16) |
| #define VgaTiming0_HBP Fld(8,24) |
| |
| #define VgaTiming1_LPS Fld(10,0) |
| #define VgaTiming1_VSW Fld(6,10) |
| #define VgaTiming1_VFP Fld(8,16) |
| #define VgaTiming1_VBP Fld(8,24) |
| |
| #define VgaTiming2_IVS 0x01 |
| #define VgaTiming2_IHS 0x02 |
| #define VgaTiming2_CVS 0x04 |
| #define VgaTiming2_CHS 0x08 |
| |
| #define VgaTiming3_HBS Fld(8,0) |
| #define VgaTiming3_HBE Fld(8,8) |
| #define VgaTiming3_VBS Fld(8,16) |
| #define VgaTiming3_VBE Fld(8,24) |
| |
| #define VgaBorder_BCOL Fld(24,0) |
| |
| #define VgaStatus_VFUF 0x01 |
| #define VgaStatus_VNext 0x02 |
| #define VgaStatus_VComp 0x04 |
| |
| #define VgaInterruptMask_VFUFMask 0x00 |
| #define VgaInterruptMask_VNextMask 0x01 |
| #define VgaInterruptMask_VCompMask 0x02 |
| |
| #define VgaPalette_R Fld(8,0) |
| #define VgaPalette_G Fld(8,8) |
| #define VgaPalette_B Fld(8,16) |
| |
| #define DacControl_DACON 0x0001 |
| #define DacControl_COMPON 0x0002 |
| #define DacControl_PEDON 0x0004 |
| #define DacControl_RTrim Fld(5,4) |
| #define DacControl_GTrim Fld(5,9) |
| #define DacControl_BTrim Fld(5,14) |
| |
| #define VgaTest_TDAC 0x00 |
| #define VgaTest_Datatest Fld(4,1) |
| #define VgaTest_DACTESTDAC 0x10 |
| #define VgaTest_DACTESTOUT Fld(3,5) |
| |
| #endif /* LANGUAGE == C */ |
| |
| /* |
| * USB Host Interface Controller |
| * |
| * Registers |
| * Revision |
| * Control |
| * CommandStatus |
| * InterruptStatus |
| * InterruptEnable |
| * HCCA |
| * PeriodCurrentED |
| * ControlHeadED |
| * BulkHeadED |
| * BulkCurrentED |
| * DoneHead |
| * FmInterval |
| * FmRemaining |
| * FmNumber |
| * PeriodicStart |
| * LSThreshold |
| * RhDescriptorA |
| * RhDescriptorB |
| * RhStatus |
| * RhPortStatus |
| * USBStatus |
| * USBReset |
| * USTAR |
| * USWER |
| * USRFR |
| * USNFR |
| * USTCSR |
| * USSR |
| * |
| */ |
| |
| #define _USB( x ) _SA1101( ( x ) + __USB_CONTROL ) |
| |
| |
| #define _Revision _USB( 0x0000 ) |
| #define _Control _USB( 0x0888 ) |
| #define _CommandStatus _USB( 0x0c00 ) |
| #define _InterruptStatus _USB( 0x1000 ) |
| #define _InterruptEnable _USB( 0x1400 ) |
| #define _HCCA _USB( 0x1800 ) |
| #define _PeriodCurrentED _USB( 0x1c00 ) |
| #define _ControlHeadED _USB( 0x2000 ) |
| #define _BulkHeadED _USB( 0x2800 ) |
| #define _BulkCurrentED _USB( 0x2c00 ) |
| #define _DoneHead _USB( 0x3000 ) |
| #define _FmInterval _USB( 0x3400 ) |
| #define _FmRemaining _USB( 0x3800 ) |
| #define _FmNumber _USB( 0x3c00 ) |
| #define _PeriodicStart _USB( 0x4000 ) |
| #define _LSThreshold _USB( 0x4400 ) |
| #define _RhDescriptorA _USB( 0x4800 ) |
| #define _RhDescriptorB _USB( 0x4c00 ) |
| #define _RhStatus _USB( 0x5000 ) |
| #define _RhPortStatus _USB( 0x5400 ) |
| #define _USBStatus _USB( 0x11800 ) |
| #define _USBReset _USB( 0x11c00 ) |
| |
| #define _USTAR _USB( 0x10400 ) |
| #define _USWER _USB( 0x10800 ) |
| #define _USRFR _USB( 0x10c00 ) |
| #define _USNFR _USB( 0x11000 ) |
| #define _USTCSR _USB( 0x11400 ) |
| #define _USSR _USB( 0x11800 ) |
| |
| |
| #if (LANGUAGE == C) |
| |
| #define Revision (*((volatile Word *) SA1101_p2v (_Revision))) |
| #define Control (*((volatile Word *) SA1101_p2v (_Control))) |
| #define CommandStatus (*((volatile Word *) SA1101_p2v (_CommandStatus))) |
| #define InterruptStatus (*((volatile Word *) SA1101_p2v (_InterruptStatus))) |
| #define InterruptEnable (*((volatile Word *) SA1101_p2v (_InterruptEnable))) |
| #define HCCA (*((volatile Word *) SA1101_p2v (_HCCA))) |
| #define PeriodCurrentED (*((volatile Word *) SA1101_p2v (_PeriodCurrentED))) |
| #define ControlHeadED (*((volatile Word *) SA1101_p2v (_ControlHeadED))) |
| #define BulkHeadED (*((volatile Word *) SA1101_p2v (_BulkHeadED))) |
| #define BulkCurrentED (*((volatile Word *) SA1101_p2v (_BulkCurrentED))) |
| #define DoneHead (*((volatile Word *) SA1101_p2v (_DoneHead))) |
| #define FmInterval (*((volatile Word *) SA1101_p2v (_FmInterval))) |
| #define FmRemaining (*((volatile Word *) SA1101_p2v (_FmRemaining))) |
| #define FmNumber (*((volatile Word *) SA1101_p2v (_FmNumber))) |
| #define PeriodicStart (*((volatile Word *) SA1101_p2v (_PeriodicStart))) |
| #define LSThreshold (*((volatile Word *) SA1101_p2v (_LSThreshold))) |
| #define RhDescriptorA (*((volatile Word *) SA1101_p2v (_RhDescriptorA))) |
| #define RhDescriptorB (*((volatile Word *) SA1101_p2v (_RhDescriptorB))) |
| #define RhStatus (*((volatile Word *) SA1101_p2v (_RhStatus))) |
| #define RhPortStatus (*((volatile Word *) SA1101_p2v (_RhPortStatus))) |
| #define USBStatus (*((volatile Word *) SA1101_p2v (_USBStatus))) |
| #define USBReset (*((volatile Word *) SA1101_p2v (_USBReset))) |
| #define USTAR (*((volatile Word *) SA1101_p2v (_USTAR))) |
| #define USWER (*((volatile Word *) SA1101_p2v (_USWER))) |
| #define USRFR (*((volatile Word *) SA1101_p2v (_USRFR))) |
| #define USNFR (*((volatile Word *) SA1101_p2v (_USNFR))) |
| #define USTCSR (*((volatile Word *) SA1101_p2v (_USTCSR))) |
| #define USSR (*((volatile Word *) SA1101_p2v (_USSR))) |
| |
| |
| #define USBStatus_IrqHciRmtWkp (1<<7) |
| #define USBStatus_IrqHciBuffAcc (1<<8) |
| #define USBStatus_nIrqHciM (1<<9) |
| #define USBStatus_nHciMFClr (1<<10) |
| |
| #define USBReset_ForceIfReset 0x01 |
| #define USBReset_ForceHcReset 0x02 |
| #define USBReset_ClkGenReset 0x04 |
| |
| #define USTCR_RdBstCntrl Fld(3,0) |
| #define USTCR_ByteEnable Fld(4,3) |
| #define USTCR_WriteEn (1<<7) |
| #define USTCR_FifoCir (1<<8) |
| #define USTCR_TestXferSel (1<<9) |
| #define USTCR_FifoCirAtEnd (1<<10) |
| #define USTCR_nSimScaleDownClk (1<<11) |
| |
| #define USSR_nAppMDEmpty 0x01 |
| #define USSR_nAppMDFirst 0x02 |
| #define USSR_nAppMDLast 0x04 |
| #define USSR_nAppMDFull 0x08 |
| #define USSR_nAppMAFull 0x10 |
| #define USSR_XferReq 0x20 |
| #define USSR_XferEnd 0x40 |
| |
| #endif /* LANGUAGE == C */ |
| |
| |
| /* |
| * Interrupt Controller |
| * |
| * Registers |
| * INTTEST0 Test register 0 |
| * INTTEST1 Test register 1 |
| * INTENABLE0 Interrupt Enable register 0 |
| * INTENABLE1 Interrupt Enable register 1 |
| * INTPOL0 Interrupt Polarity selection 0 |
| * INTPOL1 Interrupt Polarity selection 1 |
| * INTTSTSEL Interrupt source selection |
| * INTSTATCLR0 Interrupt Status 0 |
| * INTSTATCLR1 Interrupt Status 1 |
| * INTSET0 Interrupt Set 0 |
| * INTSET1 Interrupt Set 1 |
| */ |
| |
| #define _INT( x ) _SA1101( ( x ) + __INTERRUPT_CONTROL) |
| |
| #define _INTTEST0 _INT( 0x1000 ) |
| #define _INTTEST1 _INT( 0x1400 ) |
| #define _INTENABLE0 _INT( 0x2000 ) |
| #define _INTENABLE1 _INT( 0x2400 ) |
| #define _INTPOL0 _INT( 0x3000 ) |
| #define _INTPOL1 _INT( 0x3400 ) |
| #define _INTTSTSEL _INT( 0x5000 ) |
| #define _INTSTATCLR0 _INT( 0x6000 ) |
| #define _INTSTATCLR1 _INT( 0x6400 ) |
| #define _INTSET0 _INT( 0x7000 ) |
| #define _INTSET1 _INT( 0x7400 ) |
| |
| #if ( LANGUAGE == C ) |
| #define INTTEST0 (*((volatile Word *) SA1101_p2v (_INTTEST0))) |
| #define INTTEST1 (*((volatile Word *) SA1101_p2v (_INTTEST1))) |
| #define INTENABLE0 (*((volatile Word *) SA1101_p2v (_INTENABLE0))) |
| #define INTENABLE1 (*((volatile Word *) SA1101_p2v (_INTENABLE1))) |
| #define INTPOL0 (*((volatile Word *) SA1101_p2v (_INTPOL0))) |
| #define INTPOL1 (*((volatile Word *) SA1101_p2v (_INTPOL1))) |
| #define INTTSTSEL (*((volatile Word *) SA1101_p2v (_INTTSTSEL))) |
| #define INTSTATCLR0 (*((volatile Word *) SA1101_p2v (_INTSTATCLR0))) |
| #define INTSTATCLR1 (*((volatile Word *) SA1101_p2v (_INTSTATCLR1))) |
| #define INTSET0 (*((volatile Word *) SA1101_p2v (_INTSET0))) |
| #define INTSET1 (*((volatile Word *) SA1101_p2v (_INTSET1))) |
| |
| #endif /* LANGUAGE == C */ |
| |
| /* |
| * PS/2 Trackpad and Mouse Interfaces |
| * |
| * Registers (prefix kbd applies to trackpad interface, mse to mouse) |
| * KBDCR Control Register |
| * KBDSTAT Status Register |
| * KBDDATA Transmit/Receive Data register |
| * KBDCLKDIV Clock Division Register |
| * KBDPRECNT Clock Precount Register |
| * KBDTEST1 Test register 1 |
| * KBDTEST2 Test register 2 |
| * KBDTEST3 Test register 3 |
| * KBDTEST4 Test register 4 |
| * MSECR |
| * MSESTAT |
| * MSEDATA |
| * MSECLKDIV |
| * MSEPRECNT |
| * MSETEST1 |
| * MSETEST2 |
| * MSETEST3 |
| * MSETEST4 |
| * |
| */ |
| |
| #define _KBD( x ) _SA1101( ( x ) + __TRACK_INTERFACE ) |
| #define _MSE( x ) _SA1101( ( x ) + __MOUSE_INTERFACE ) |
| |
| #define _KBDCR _KBD( 0x0000 ) |
| #define _KBDSTAT _KBD( 0x0400 ) |
| #define _KBDDATA _KBD( 0x0800 ) |
| #define _KBDCLKDIV _KBD( 0x0c00 ) |
| #define _KBDPRECNT _KBD( 0x1000 ) |
| #define _KBDTEST1 _KBD( 0x2000 ) |
| #define _KBDTEST2 _KBD( 0x2400 ) |
| #define _KBDTEST3 _KBD( 0x2800 ) |
| #define _KBDTEST4 _KBD( 0x2c00 ) |
| #define _MSECR _MSE( 0x0000 ) |
| #define _MSESTAT _MSE( 0x0400 ) |
| #define _MSEDATA _MSE( 0x0800 ) |
| #define _MSECLKDIV _MSE( 0x0c00 ) |
| #define _MSEPRECNT _MSE( 0x1000 ) |
| #define _MSETEST1 _MSE( 0x2000 ) |
| #define _MSETEST2 _MSE( 0x2400 ) |
| #define _MSETEST3 _MSE( 0x2800 ) |
| #define _MSETEST4 _MSE( 0x2c00 ) |
| |
| #if ( LANGUAGE == C ) |
| |
| #define KBDCR (*((volatile Word *) SA1101_p2v (_KBDCR))) |
| #define KBDSTAT (*((volatile Word *) SA1101_p2v (_KBDSTAT))) |
| #define KBDDATA (*((volatile Word *) SA1101_p2v (_KBDDATA))) |
| #define KBDCLKDIV (*((volatile Word *) SA1101_p2v (_KBDCLKDIV))) |
| #define KBDPRECNT (*((volatile Word *) SA1101_p2v (_KBDPRECNT))) |
| #define KBDTEST1 (*((volatile Word *) SA1101_p2v (_KBDTEST1))) |
| #define KBDTEST2 (*((volatile Word *) SA1101_p2v (_KBDTEST2))) |
| #define KBDTEST3 (*((volatile Word *) SA1101_p2v (_KBDTEST3))) |
| #define KBDTEST4 (*((volatile Word *) SA1101_p2v (_KBDTEST4))) |
| #define MSECR (*((volatile Word *) SA1101_p2v (_MSECR))) |
| #define MSESTAT (*((volatile Word *) SA1101_p2v (_MSESTAT))) |
| #define MSEDATA (*((volatile Word *) SA1101_p2v (_MSEDATA))) |
| #define MSECLKDIV (*((volatile Word *) SA1101_p2v (_MSECLKDIV))) |
| #define MSEPRECNT (*((volatile Word *) SA1101_p2v (_MSEPRECNT))) |
| #define MSETEST1 (*((volatile Word *) SA1101_p2v (_MSETEST1))) |
| #define MSETEST2 (*((volatile Word *) SA1101_p2v (_MSETEST2))) |
| #define MSETEST3 (*((volatile Word *) SA1101_p2v (_MSETEST3))) |
| #define MSETEST4 (*((volatile Word *) SA1101_p2v (_MSETEST4))) |
| |
| |
| #define KBDCR_ENA 0x08 |
| #define KBDCR_FKD 0x02 |
| #define KBDCR_FKC 0x01 |
| |
| #define KBDSTAT_TXE 0x80 |
| #define KBDSTAT_TXB 0x40 |
| #define KBDSTAT_RXF 0x20 |
| #define KBDSTAT_RXB 0x10 |
| #define KBDSTAT_ENA 0x08 |
| #define KBDSTAT_RXP 0x04 |
| #define KBDSTAT_KBD 0x02 |
| #define KBDSTAT_KBC 0x01 |
| |
| #define KBDCLKDIV_DivVal Fld(4,0) |
| |
| #define MSECR_ENA 0x08 |
| #define MSECR_FKD 0x02 |
| #define MSECR_FKC 0x01 |
| |
| #define MSESTAT_TXE 0x80 |
| #define MSESTAT_TXB 0x40 |
| #define MSESTAT_RXF 0x20 |
| #define MSESTAT_RXB 0x10 |
| #define MSESTAT_ENA 0x08 |
| #define MSESTAT_RXP 0x04 |
| #define MSESTAT_MSD 0x02 |
| #define MSESTAT_MSC 0x01 |
| |
| #define MSECLKDIV_DivVal Fld(4,0) |
| |
| #define KBDTEST1_CD 0x80 |
| #define KBDTEST1_RC1 0x40 |
| #define KBDTEST1_MC 0x20 |
| #define KBDTEST1_C Fld(2,3) |
| #define KBDTEST1_T2 0x40 |
| #define KBDTEST1_T1 0x20 |
| #define KBDTEST1_T0 0x10 |
| #define KBDTEST2_TICBnRES 0x08 |
| #define KBDTEST2_RKC 0x04 |
| #define KBDTEST2_RKD 0x02 |
| #define KBDTEST2_SEL 0x01 |
| #define KBDTEST3_ms_16 0x80 |
| #define KBDTEST3_us_64 0x40 |
| #define KBDTEST3_us_16 0x20 |
| #define KBDTEST3_DIV8 0x10 |
| #define KBDTEST3_DIn 0x08 |
| #define KBDTEST3_CIn 0x04 |
| #define KBDTEST3_KD 0x02 |
| #define KBDTEST3_KC 0x01 |
| #define KBDTEST4_BC12 0x80 |
| #define KBDTEST4_BC11 0x40 |
| #define KBDTEST4_TRES 0x20 |
| #define KBDTEST4_CLKOE 0x10 |
| #define KBDTEST4_CRES 0x08 |
| #define KBDTEST4_RXB 0x04 |
| #define KBDTEST4_TXB 0x02 |
| #define KBDTEST4_SRX 0x01 |
| |
| #define MSETEST1_CD 0x80 |
| #define MSETEST1_RC1 0x40 |
| #define MSETEST1_MC 0x20 |
| #define MSETEST1_C Fld(2,3) |
| #define MSETEST1_T2 0x40 |
| #define MSETEST1_T1 0x20 |
| #define MSETEST1_T0 0x10 |
| #define MSETEST2_TICBnRES 0x08 |
| #define MSETEST2_RKC 0x04 |
| #define MSETEST2_RKD 0x02 |
| #define MSETEST2_SEL 0x01 |
| #define MSETEST3_ms_16 0x80 |
| #define MSETEST3_us_64 0x40 |
| #define MSETEST3_us_16 0x20 |
| #define MSETEST3_DIV8 0x10 |
| #define MSETEST3_DIn 0x08 |
| #define MSETEST3_CIn 0x04 |
| #define MSETEST3_KD 0x02 |
| #define MSETEST3_KC 0x01 |
| #define MSETEST4_BC12 0x80 |
| #define MSETEST4_BC11 0x40 |
| #define MSETEST4_TRES 0x20 |
| #define MSETEST4_CLKOE 0x10 |
| #define MSETEST4_CRES 0x08 |
| #define MSETEST4_RXB 0x04 |
| #define MSETEST4_TXB 0x02 |
| #define MSETEST4_SRX 0x01 |
| |
| #endif /* LANGUAGE == C */ |
| |
| |
| /* |
| * General-Purpose I/O Interface |
| * |
| * Registers |
| * PADWR Port A Data Write Register |
| * PBDWR Port B Data Write Register |
| * PADRR Port A Data Read Register |
| * PBDRR Port B Data Read Register |
| * PADDR Port A Data Direction Register |
| * PBDDR Port B Data Direction Register |
| * PASSR Port A Sleep State Register |
| * PBSSR Port B Sleep State Register |
| * |
| */ |
| |
| #define _PIO( x ) _SA1101( ( x ) + __GPIO_INTERFACE ) |
| |
| #define _PADWR _PIO( 0x0000 ) |
| #define _PBDWR _PIO( 0x0400 ) |
| #define _PADRR _PIO( 0x0000 ) |
| #define _PBDRR _PIO( 0x0400 ) |
| #define _PADDR _PIO( 0x0800 ) |
| #define _PBDDR _PIO( 0x0c00 ) |
| #define _PASSR _PIO( 0x1000 ) |
| #define _PBSSR _PIO( 0x1400 ) |
| |
| |
| #if ( LANGUAGE == C ) |
| |
| |
| #define PADWR (*((volatile Word *) SA1101_p2v (_PADWR))) |
| #define PBDWR (*((volatile Word *) SA1101_p2v (_PBDWR))) |
| #define PADRR (*((volatile Word *) SA1101_p2v (_PADRR))) |
| #define PBDRR (*((volatile Word *) SA1101_p2v (_PBDRR))) |
| #define PADDR (*((volatile Word *) SA1101_p2v (_PADDR))) |
| #define PBDDR (*((volatile Word *) SA1101_p2v (_PBDDR))) |
| #define PASSR (*((volatile Word *) SA1101_p2v (_PASSR))) |
| #define PBSSR (*((volatile Word *) SA1101_p2v (_PBSSR))) |
| |
| #endif |
| |
| |
| |
| /* |
| * Keypad Interface |
| * |
| * Registers |
| * PXDWR |
| * PXDRR |
| * PYDWR |
| * PYDRR |
| * |
| */ |
| |
| #define _KEYPAD( x ) _SA1101( ( x ) + __KEYPAD_INTERFACE ) |
| |
| #define _PXDWR _KEYPAD( 0x0000 ) |
| #define _PXDRR _KEYPAD( 0x0000 ) |
| #define _PYDWR _KEYPAD( 0x0400 ) |
| #define _PYDRR _KEYPAD( 0x0400 ) |
| |
| #if ( LANGUAGE == C ) |
| |
| |
| #define PXDWR (*((volatile Word *) SA1101_p2v (_PXDWR))) |
| #define PXDRR (*((volatile Word *) SA1101_p2v (_PXDRR))) |
| #define PYDWR (*((volatile Word *) SA1101_p2v (_PYDWR))) |
| #define PYDRR (*((volatile Word *) SA1101_p2v (_PYDRR))) |
| |
| #endif |
| |
| |
| |
| /* |
| * PCMCIA Interface |
| * |
| * Registers |
| * PCSR Status Register |
| * PCCR Control Register |
| * PCSSR Sleep State Register |
| * |
| */ |
| |
| #define _CARD( x ) _SA1101( ( x ) + __PCMCIA_INTERFACE ) |
| |
| #define _PCSR _CARD( 0x0000 ) |
| #define _PCCR _CARD( 0x0400 ) |
| #define _PCSSR _CARD( 0x0800 ) |
| |
| #if ( LANGUAGE == C ) |
| #define PCSR (*((volatile Word *) SA1101_p2v (_PCSR))) |
| #define PCCR (*((volatile Word *) SA1101_p2v (_PCCR))) |
| #define PCSSR (*((volatile Word *) SA1101_p2v (_PCSSR))) |
| |
| #define PCSR_S0_ready 0x0001 |
| #define PCSR_S1_ready 0x0002 |
| #define PCSR_S0_detected 0x0004 |
| #define PCSR_S1_detected 0x0008 |
| #define PCSR_S0_VS1 0x0010 |
| #define PCSR_S0_VS2 0x0020 |
| #define PCSR_S1_VS1 0x0040 |
| #define PCSR_S1_VS2 0x0080 |
| #define PCSR_S0_WP 0x0100 |
| #define PCSR_S1_WP 0x0200 |
| #define PCSR_S0_BVD1_nSTSCHG 0x0400 |
| #define PCSR_S0_BVD2_nSPKR 0x0800 |
| #define PCSR_S1_BVD1_nSTSCHG 0x1000 |
| #define PCSR_S1_BVD2_nSPKR 0x2000 |
| |
| #define PCCR_S0_VPP0 0x0001 |
| #define PCCR_S0_VPP1 0x0002 |
| #define PCCR_S0_VCC0 0x0004 |
| #define PCCR_S0_VCC1 0x0008 |
| #define PCCR_S1_VPP0 0x0010 |
| #define PCCR_S1_VPP1 0x0020 |
| #define PCCR_S1_VCC0 0x0040 |
| #define PCCR_S1_VCC1 0x0080 |
| #define PCCR_S0_reset 0x0100 |
| #define PCCR_S1_reset 0x0200 |
| #define PCCR_S0_float 0x0400 |
| #define PCCR_S1_float 0x0800 |
| |
| #define PCSSR_S0_VCC0 0x0001 |
| #define PCSSR_S0_VCC1 0x0002 |
| #define PCSSR_S0_VPP0 0x0004 |
| #define PCSSR_S0_VPP1 0x0008 |
| #define PCSSR_S0_control 0x0010 |
| #define PCSSR_S1_VCC0 0x0020 |
| #define PCSSR_S1_VCC1 0x0040 |
| #define PCSSR_S1_VPP0 0x0080 |
| #define PCSSR_S1_VPP1 0x0100 |
| #define PCSSR_S1_control 0x0200 |
| |
| #endif |
| |
| #undef C |
| #undef Assembly |
