| /* |
| * linux/sound/pxa2xx-ac97.c -- AC97 support for the Intel PXA2xx chip. |
| * |
| * Author: Nicolas Pitre |
| * Created: Dec 02, 2004 |
| * Copyright: MontaVista Software Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/dmaengine.h> |
| #include <linux/dma/pxa-dma.h> |
| |
| #include <sound/core.h> |
| #include <sound/ac97_codec.h> |
| #include <sound/soc.h> |
| #include <sound/pxa2xx-lib.h> |
| #include <sound/dmaengine_pcm.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/regs-ac97.h> |
| #include <mach/audio.h> |
| |
| #include "pxa2xx-ac97.h" |
| |
| static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97) |
| { |
| pxa2xx_ac97_try_warm_reset(ac97); |
| |
| pxa2xx_ac97_finish_reset(ac97); |
| } |
| |
| static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97) |
| { |
| pxa2xx_ac97_try_cold_reset(ac97); |
| |
| pxa2xx_ac97_finish_reset(ac97); |
| } |
| |
| static struct snd_ac97_bus_ops pxa2xx_ac97_ops = { |
| .read = pxa2xx_ac97_read, |
| .write = pxa2xx_ac97_write, |
| .warm_reset = pxa2xx_ac97_warm_reset, |
| .reset = pxa2xx_ac97_cold_reset, |
| }; |
| |
| static struct pxad_param pxa2xx_ac97_pcm_stereo_in_req = { |
| .prio = PXAD_PRIO_LOWEST, |
| .drcmr = 11, |
| }; |
| |
| static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_in = { |
| .addr = __PREG(PCDR), |
| .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, |
| .maxburst = 32, |
| .filter_data = &pxa2xx_ac97_pcm_stereo_in_req, |
| }; |
| |
| static struct pxad_param pxa2xx_ac97_pcm_stereo_out_req = { |
| .prio = PXAD_PRIO_LOWEST, |
| .drcmr = 12, |
| }; |
| |
| static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_out = { |
| .addr = __PREG(PCDR), |
| .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, |
| .maxburst = 32, |
| .filter_data = &pxa2xx_ac97_pcm_stereo_out_req, |
| }; |
| |
| static struct pxad_param pxa2xx_ac97_pcm_aux_mono_out_req = { |
| .prio = PXAD_PRIO_LOWEST, |
| .drcmr = 10, |
| }; |
| static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_out = { |
| .addr = __PREG(MODR), |
| .addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES, |
| .maxburst = 16, |
| .filter_data = &pxa2xx_ac97_pcm_aux_mono_out_req, |
| }; |
| |
| static struct pxad_param pxa2xx_ac97_pcm_aux_mono_in_req = { |
| .prio = PXAD_PRIO_LOWEST, |
| .drcmr = 9, |
| }; |
| static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_in = { |
| .addr = __PREG(MODR), |
| .addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES, |
| .maxburst = 16, |
| .filter_data = &pxa2xx_ac97_pcm_aux_mono_in_req, |
| }; |
| |
| static struct pxad_param pxa2xx_ac97_pcm_aux_mic_mono_req = { |
| .prio = PXAD_PRIO_LOWEST, |
| .drcmr = 8, |
| }; |
| static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_mic_mono_in = { |
| .addr = __PREG(MCDR), |
| .addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES, |
| .maxburst = 16, |
| .filter_data = &pxa2xx_ac97_pcm_aux_mic_mono_req, |
| }; |
| |
| static int pxa2xx_ac97_hifi_startup(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *cpu_dai) |
| { |
| struct snd_dmaengine_dai_dma_data *dma_data; |
| |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| dma_data = &pxa2xx_ac97_pcm_stereo_out; |
| else |
| dma_data = &pxa2xx_ac97_pcm_stereo_in; |
| |
| snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data); |
| |
| return 0; |
| } |
| |
| static int pxa2xx_ac97_aux_startup(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *cpu_dai) |
| { |
| struct snd_dmaengine_dai_dma_data *dma_data; |
| |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| dma_data = &pxa2xx_ac97_pcm_aux_mono_out; |
| else |
| dma_data = &pxa2xx_ac97_pcm_aux_mono_in; |
| |
| snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data); |
| |
| return 0; |
| } |
| |
| static int pxa2xx_ac97_mic_startup(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *cpu_dai) |
| { |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| return -ENODEV; |
| else |
| snd_soc_dai_set_dma_data(cpu_dai, substream, |
| &pxa2xx_ac97_pcm_mic_mono_in); |
| |
| return 0; |
| } |
| |
| #define PXA2XX_AC97_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ |
| SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \ |
| SNDRV_PCM_RATE_48000) |
| |
| static const struct snd_soc_dai_ops pxa_ac97_hifi_dai_ops = { |
| .startup = pxa2xx_ac97_hifi_startup, |
| }; |
| |
| static const struct snd_soc_dai_ops pxa_ac97_aux_dai_ops = { |
| .startup = pxa2xx_ac97_aux_startup, |
| }; |
| |
| static const struct snd_soc_dai_ops pxa_ac97_mic_dai_ops = { |
| .startup = pxa2xx_ac97_mic_startup, |
| }; |
| |
| /* |
| * There is only 1 physical AC97 interface for pxa2xx, but it |
| * has extra fifo's that can be used for aux DACs and ADCs. |
| */ |
| static struct snd_soc_dai_driver pxa_ac97_dai_driver[] = { |
| { |
| .name = "pxa2xx-ac97", |
| .bus_control = true, |
| .playback = { |
| .stream_name = "AC97 Playback", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = PXA2XX_AC97_RATES, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE,}, |
| .capture = { |
| .stream_name = "AC97 Capture", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = PXA2XX_AC97_RATES, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE,}, |
| .ops = &pxa_ac97_hifi_dai_ops, |
| }, |
| { |
| .name = "pxa2xx-ac97-aux", |
| .bus_control = true, |
| .playback = { |
| .stream_name = "AC97 Aux Playback", |
| .channels_min = 1, |
| .channels_max = 1, |
| .rates = PXA2XX_AC97_RATES, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE,}, |
| .capture = { |
| .stream_name = "AC97 Aux Capture", |
| .channels_min = 1, |
| .channels_max = 1, |
| .rates = PXA2XX_AC97_RATES, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE,}, |
| .ops = &pxa_ac97_aux_dai_ops, |
| }, |
| { |
| .name = "pxa2xx-ac97-mic", |
| .bus_control = true, |
| .capture = { |
| .stream_name = "AC97 Mic Capture", |
| .channels_min = 1, |
| .channels_max = 1, |
| .rates = PXA2XX_AC97_RATES, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE,}, |
| .ops = &pxa_ac97_mic_dai_ops, |
| }, |
| }; |
| |
| static const struct snd_soc_component_driver pxa_ac97_component = { |
| .name = "pxa-ac97", |
| }; |
| |
| static int pxa2xx_ac97_dev_probe(struct platform_device *pdev) |
| { |
| int ret; |
| |
| if (pdev->id != -1) { |
| dev_err(&pdev->dev, "PXA2xx has only one AC97 port.\n"); |
| return -ENXIO; |
| } |
| |
| ret = pxa2xx_ac97_hw_probe(pdev); |
| if (ret) { |
| dev_err(&pdev->dev, "PXA2xx AC97 hw probe error (%d)\n", ret); |
| return ret; |
| } |
| |
| ret = snd_soc_set_ac97_ops(&pxa2xx_ac97_ops); |
| if (ret != 0) |
| return ret; |
| |
| /* Punt most of the init to the SoC probe; we may need the machine |
| * driver to do interesting things with the clocking to get us up |
| * and running. |
| */ |
| return snd_soc_register_component(&pdev->dev, &pxa_ac97_component, |
| pxa_ac97_dai_driver, ARRAY_SIZE(pxa_ac97_dai_driver)); |
| } |
| |
| static int pxa2xx_ac97_dev_remove(struct platform_device *pdev) |
| { |
| snd_soc_unregister_component(&pdev->dev); |
| snd_soc_set_ac97_ops(NULL); |
| pxa2xx_ac97_hw_remove(pdev); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int pxa2xx_ac97_dev_suspend(struct device *dev) |
| { |
| return pxa2xx_ac97_hw_suspend(); |
| } |
| |
| static int pxa2xx_ac97_dev_resume(struct device *dev) |
| { |
| return pxa2xx_ac97_hw_resume(); |
| } |
| |
| static SIMPLE_DEV_PM_OPS(pxa2xx_ac97_pm_ops, |
| pxa2xx_ac97_dev_suspend, pxa2xx_ac97_dev_resume); |
| #endif |
| |
| static struct platform_driver pxa2xx_ac97_driver = { |
| .probe = pxa2xx_ac97_dev_probe, |
| .remove = pxa2xx_ac97_dev_remove, |
| .driver = { |
| .name = "pxa2xx-ac97", |
| #ifdef CONFIG_PM_SLEEP |
| .pm = &pxa2xx_ac97_pm_ops, |
| #endif |
| }, |
| }; |
| |
| module_platform_driver(pxa2xx_ac97_driver); |
| |
| MODULE_AUTHOR("Nicolas Pitre"); |
| MODULE_DESCRIPTION("AC97 driver for the Intel PXA2xx chip"); |
| MODULE_LICENSE("GPL"); |