| /* |
| * Elan I2C/SMBus Touchpad driver - SMBus interface |
| * |
| * Copyright (c) 2013 ELAN Microelectronics Corp. |
| * |
| * Author: 林政維 (Duson Lin) <dusonlin@emc.com.tw> |
| * |
| * Based on cyapa driver: |
| * copyright (c) 2011-2012 Cypress Semiconductor, Inc. |
| * copyright (c) 2011-2012 Google, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| * Trademarks are the property of their respective owners. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| |
| #include "elan_i2c.h" |
| |
| /* Elan SMbus commands */ |
| #define ETP_SMBUS_IAP_CMD 0x00 |
| #define ETP_SMBUS_ENABLE_TP 0x20 |
| #define ETP_SMBUS_SLEEP_CMD 0x21 |
| #define ETP_SMBUS_IAP_PASSWORD_WRITE 0x29 |
| #define ETP_SMBUS_IAP_PASSWORD_READ 0x80 |
| #define ETP_SMBUS_WRITE_FW_BLOCK 0x2A |
| #define ETP_SMBUS_IAP_RESET_CMD 0x2B |
| #define ETP_SMBUS_RANGE_CMD 0xA0 |
| #define ETP_SMBUS_FW_VERSION_CMD 0xA1 |
| #define ETP_SMBUS_XY_TRACENUM_CMD 0xA2 |
| #define ETP_SMBUS_SM_VERSION_CMD 0xA3 |
| #define ETP_SMBUS_UNIQUEID_CMD 0xA3 |
| #define ETP_SMBUS_RESOLUTION_CMD 0xA4 |
| #define ETP_SMBUS_HELLOPACKET_CMD 0xA7 |
| #define ETP_SMBUS_PACKET_QUERY 0xA8 |
| #define ETP_SMBUS_IAP_VERSION_CMD 0xAC |
| #define ETP_SMBUS_IAP_CTRL_CMD 0xAD |
| #define ETP_SMBUS_IAP_CHECKSUM_CMD 0xAE |
| #define ETP_SMBUS_FW_CHECKSUM_CMD 0xAF |
| #define ETP_SMBUS_MAX_BASELINE_CMD 0xC3 |
| #define ETP_SMBUS_MIN_BASELINE_CMD 0xC4 |
| #define ETP_SMBUS_CALIBRATE_QUERY 0xC5 |
| |
| #define ETP_SMBUS_REPORT_LEN 32 |
| #define ETP_SMBUS_REPORT_OFFSET 2 |
| #define ETP_SMBUS_HELLOPACKET_LEN 5 |
| #define ETP_SMBUS_IAP_PASSWORD 0x1234 |
| #define ETP_SMBUS_IAP_MODE_ON (1 << 6) |
| |
| static int elan_smbus_initialize(struct i2c_client *client) |
| { |
| u8 check[ETP_SMBUS_HELLOPACKET_LEN] = { 0x55, 0x55, 0x55, 0x55, 0x55 }; |
| u8 values[ETP_SMBUS_HELLOPACKET_LEN] = { 0, 0, 0, 0, 0 }; |
| int len, error; |
| |
| /* Get hello packet */ |
| len = i2c_smbus_read_block_data(client, |
| ETP_SMBUS_HELLOPACKET_CMD, values); |
| if (len != ETP_SMBUS_HELLOPACKET_LEN) { |
| dev_err(&client->dev, "hello packet length fail: %d\n", len); |
| error = len < 0 ? len : -EIO; |
| return error; |
| } |
| |
| /* compare hello packet */ |
| if (memcmp(values, check, ETP_SMBUS_HELLOPACKET_LEN)) { |
| dev_err(&client->dev, "hello packet fail [%*ph]\n", |
| ETP_SMBUS_HELLOPACKET_LEN, values); |
| return -ENXIO; |
| } |
| |
| /* enable tp */ |
| error = i2c_smbus_write_byte(client, ETP_SMBUS_ENABLE_TP); |
| if (error) { |
| dev_err(&client->dev, "failed to enable touchpad: %d\n", error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int elan_smbus_set_mode(struct i2c_client *client, u8 mode) |
| { |
| u8 cmd[4] = { 0x00, 0x07, 0x00, mode }; |
| |
| return i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD, |
| sizeof(cmd), cmd); |
| } |
| |
| static int elan_smbus_sleep_control(struct i2c_client *client, bool sleep) |
| { |
| if (sleep) |
| return i2c_smbus_write_byte(client, ETP_SMBUS_SLEEP_CMD); |
| else |
| return 0; /* XXX should we send ETP_SMBUS_ENABLE_TP here? */ |
| } |
| |
| static int elan_smbus_power_control(struct i2c_client *client, bool enable) |
| { |
| return 0; /* A no-op */ |
| } |
| |
| static int elan_smbus_calibrate(struct i2c_client *client) |
| { |
| u8 cmd[4] = { 0x00, 0x08, 0x00, 0x01 }; |
| |
| return i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD, |
| sizeof(cmd), cmd); |
| } |
| |
| static int elan_smbus_calibrate_result(struct i2c_client *client, u8 *val) |
| { |
| int error; |
| |
| error = i2c_smbus_read_block_data(client, |
| ETP_SMBUS_CALIBRATE_QUERY, val); |
| if (error < 0) |
| return error; |
| |
| return 0; |
| } |
| |
| static int elan_smbus_get_baseline_data(struct i2c_client *client, |
| bool max_baseline, u8 *value) |
| { |
| int error; |
| u8 val[3]; |
| |
| error = i2c_smbus_read_block_data(client, |
| max_baseline ? |
| ETP_SMBUS_MAX_BASELINE_CMD : |
| ETP_SMBUS_MIN_BASELINE_CMD, |
| val); |
| if (error < 0) |
| return error; |
| |
| *value = be16_to_cpup((__be16 *)val); |
| |
| return 0; |
| } |
| |
| static int elan_smbus_get_version(struct i2c_client *client, |
| bool iap, u8 *version) |
| { |
| int error; |
| u8 val[3]; |
| |
| error = i2c_smbus_read_block_data(client, |
| iap ? ETP_SMBUS_IAP_VERSION_CMD : |
| ETP_SMBUS_FW_VERSION_CMD, |
| val); |
| if (error < 0) { |
| dev_err(&client->dev, "failed to get %s version: %d\n", |
| iap ? "IAP" : "FW", error); |
| return error; |
| } |
| |
| *version = val[2]; |
| return 0; |
| } |
| |
| static int elan_smbus_get_sm_version(struct i2c_client *client, |
| u8 *ic_type, u8 *version) |
| { |
| int error; |
| u8 val[3]; |
| |
| error = i2c_smbus_read_block_data(client, |
| ETP_SMBUS_SM_VERSION_CMD, val); |
| if (error < 0) { |
| dev_err(&client->dev, "failed to get SM version: %d\n", error); |
| return error; |
| } |
| |
| *version = val[0]; |
| *ic_type = val[1]; |
| return 0; |
| } |
| |
| static int elan_smbus_get_product_id(struct i2c_client *client, u16 *id) |
| { |
| int error; |
| u8 val[3]; |
| |
| error = i2c_smbus_read_block_data(client, |
| ETP_SMBUS_UNIQUEID_CMD, val); |
| if (error < 0) { |
| dev_err(&client->dev, "failed to get product ID: %d\n", error); |
| return error; |
| } |
| |
| *id = be16_to_cpup((__be16 *)val); |
| return 0; |
| } |
| |
| static int elan_smbus_get_checksum(struct i2c_client *client, |
| bool iap, u16 *csum) |
| { |
| int error; |
| u8 val[3]; |
| |
| error = i2c_smbus_read_block_data(client, |
| iap ? ETP_SMBUS_FW_CHECKSUM_CMD : |
| ETP_SMBUS_IAP_CHECKSUM_CMD, |
| val); |
| if (error < 0) { |
| dev_err(&client->dev, "failed to get %s checksum: %d\n", |
| iap ? "IAP" : "FW", error); |
| return error; |
| } |
| |
| *csum = be16_to_cpup((__be16 *)val); |
| return 0; |
| } |
| |
| static int elan_smbus_get_max(struct i2c_client *client, |
| unsigned int *max_x, unsigned int *max_y) |
| { |
| int error; |
| u8 val[3]; |
| |
| error = i2c_smbus_read_block_data(client, ETP_SMBUS_RANGE_CMD, val); |
| if (error) { |
| dev_err(&client->dev, "failed to get dimensions: %d\n", error); |
| return error; |
| } |
| |
| *max_x = (0x0f & val[0]) << 8 | val[1]; |
| *max_y = (0xf0 & val[0]) << 4 | val[2]; |
| |
| return 0; |
| } |
| |
| static int elan_smbus_get_resolution(struct i2c_client *client, |
| u8 *hw_res_x, u8 *hw_res_y) |
| { |
| int error; |
| u8 val[3]; |
| |
| error = i2c_smbus_read_block_data(client, |
| ETP_SMBUS_RESOLUTION_CMD, val); |
| if (error) { |
| dev_err(&client->dev, "failed to get resolution: %d\n", error); |
| return error; |
| } |
| |
| *hw_res_x = val[1] & 0x0F; |
| *hw_res_y = (val[1] & 0xF0) >> 4; |
| |
| return 0; |
| } |
| |
| static int elan_smbus_get_num_traces(struct i2c_client *client, |
| unsigned int *x_traces, |
| unsigned int *y_traces) |
| { |
| int error; |
| u8 val[3]; |
| |
| error = i2c_smbus_read_block_data(client, |
| ETP_SMBUS_XY_TRACENUM_CMD, val); |
| if (error) { |
| dev_err(&client->dev, "failed to get trace info: %d\n", error); |
| return error; |
| } |
| |
| *x_traces = val[1]; |
| *y_traces = val[2]; |
| |
| return 0; |
| } |
| |
| static int elan_smbus_get_pressure_adjustment(struct i2c_client *client, |
| int *adjustment) |
| { |
| *adjustment = ETP_PRESSURE_OFFSET; |
| return 0; |
| } |
| |
| static int elan_smbus_iap_get_mode(struct i2c_client *client, |
| enum tp_mode *mode) |
| { |
| int error; |
| u16 constant; |
| u8 val[3]; |
| |
| error = i2c_smbus_read_block_data(client, ETP_SMBUS_IAP_CTRL_CMD, val); |
| if (error < 0) { |
| dev_err(&client->dev, "failed to read iap ctrol register: %d\n", |
| error); |
| return error; |
| } |
| |
| constant = be16_to_cpup((__be16 *)val); |
| dev_dbg(&client->dev, "iap control reg: 0x%04x.\n", constant); |
| |
| *mode = (constant & ETP_SMBUS_IAP_MODE_ON) ? IAP_MODE : MAIN_MODE; |
| |
| return 0; |
| } |
| |
| static int elan_smbus_iap_reset(struct i2c_client *client) |
| { |
| int error; |
| |
| error = i2c_smbus_write_byte(client, ETP_SMBUS_IAP_RESET_CMD); |
| if (error) { |
| dev_err(&client->dev, "cannot reset IC: %d\n", error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int elan_smbus_set_flash_key(struct i2c_client *client) |
| { |
| int error; |
| u8 cmd[4] = { 0x00, 0x0B, 0x00, 0x5A }; |
| |
| error = i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD, |
| sizeof(cmd), cmd); |
| if (error) { |
| dev_err(&client->dev, "cannot set flash key: %d\n", error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int elan_smbus_prepare_fw_update(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| int len; |
| int error; |
| enum tp_mode mode; |
| u8 val[3]; |
| u8 cmd[4] = {0x0F, 0x78, 0x00, 0x06}; |
| u16 password; |
| |
| /* Get FW in which mode (IAP_MODE/MAIN_MODE) */ |
| error = elan_smbus_iap_get_mode(client, &mode); |
| if (error) |
| return error; |
| |
| if (mode == MAIN_MODE) { |
| |
| /* set flash key */ |
| error = elan_smbus_set_flash_key(client); |
| if (error) |
| return error; |
| |
| /* write iap password */ |
| if (i2c_smbus_write_byte(client, |
| ETP_SMBUS_IAP_PASSWORD_WRITE) < 0) { |
| dev_err(dev, "cannot write iap password\n"); |
| return -EIO; |
| } |
| |
| error = i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD, |
| sizeof(cmd), cmd); |
| if (error) { |
| dev_err(dev, "failed to write iap password: %d\n", |
| error); |
| return error; |
| } |
| |
| /* |
| * Read back password to make sure we enabled flash |
| * successfully. |
| */ |
| len = i2c_smbus_read_block_data(client, |
| ETP_SMBUS_IAP_PASSWORD_READ, |
| val); |
| if (len < sizeof(u16)) { |
| error = len < 0 ? len : -EIO; |
| dev_err(dev, "failed to read iap password: %d\n", |
| error); |
| return error; |
| } |
| |
| password = be16_to_cpup((__be16 *)val); |
| if (password != ETP_SMBUS_IAP_PASSWORD) { |
| dev_err(dev, "wrong iap password = 0x%X\n", password); |
| return -EIO; |
| } |
| |
| /* Wait 30ms for MAIN_MODE change to IAP_MODE */ |
| msleep(30); |
| } |
| |
| error = elan_smbus_set_flash_key(client); |
| if (error) |
| return error; |
| |
| /* Reset IC */ |
| error = elan_smbus_iap_reset(client); |
| if (error) |
| return error; |
| |
| return 0; |
| } |
| |
| |
| static int elan_smbus_write_fw_block(struct i2c_client *client, |
| const u8 *page, u16 checksum, int idx) |
| { |
| struct device *dev = &client->dev; |
| int error; |
| u16 result; |
| u8 val[3]; |
| |
| /* |
| * Due to the limitation of smbus protocol limiting |
| * transfer to 32 bytes at a time, we must split block |
| * in 2 transfers. |
| */ |
| error = i2c_smbus_write_block_data(client, |
| ETP_SMBUS_WRITE_FW_BLOCK, |
| ETP_FW_PAGE_SIZE / 2, |
| page); |
| if (error) { |
| dev_err(dev, "Failed to write page %d (part %d): %d\n", |
| idx, 1, error); |
| return error; |
| } |
| |
| error = i2c_smbus_write_block_data(client, |
| ETP_SMBUS_WRITE_FW_BLOCK, |
| ETP_FW_PAGE_SIZE / 2, |
| page + ETP_FW_PAGE_SIZE / 2); |
| if (error) { |
| dev_err(dev, "Failed to write page %d (part %d): %d\n", |
| idx, 2, error); |
| return error; |
| } |
| |
| |
| /* Wait for F/W to update one page ROM data. */ |
| usleep_range(8000, 10000); |
| |
| error = i2c_smbus_read_block_data(client, |
| ETP_SMBUS_IAP_CTRL_CMD, val); |
| if (error < 0) { |
| dev_err(dev, "Failed to read IAP write result: %d\n", |
| error); |
| return error; |
| } |
| |
| result = be16_to_cpup((__be16 *)val); |
| if (result & (ETP_FW_IAP_PAGE_ERR | ETP_FW_IAP_INTF_ERR)) { |
| dev_err(dev, "IAP reports failed write: %04hx\n", |
| result); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int elan_smbus_get_report(struct i2c_client *client, u8 *report) |
| { |
| int len; |
| |
| len = i2c_smbus_read_block_data(client, |
| ETP_SMBUS_PACKET_QUERY, |
| &report[ETP_SMBUS_REPORT_OFFSET]); |
| if (len < 0) { |
| dev_err(&client->dev, "failed to read report data: %d\n", len); |
| return len; |
| } |
| |
| if (len != ETP_SMBUS_REPORT_LEN) { |
| dev_err(&client->dev, |
| "wrong report length (%d vs %d expected)\n", |
| len, ETP_SMBUS_REPORT_LEN); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int elan_smbus_finish_fw_update(struct i2c_client *client, |
| struct completion *fw_completion) |
| { |
| /* No special handling unlike I2C transport */ |
| return 0; |
| } |
| |
| const struct elan_transport_ops elan_smbus_ops = { |
| .initialize = elan_smbus_initialize, |
| .sleep_control = elan_smbus_sleep_control, |
| .power_control = elan_smbus_power_control, |
| .set_mode = elan_smbus_set_mode, |
| |
| .calibrate = elan_smbus_calibrate, |
| .calibrate_result = elan_smbus_calibrate_result, |
| |
| .get_baseline_data = elan_smbus_get_baseline_data, |
| |
| .get_version = elan_smbus_get_version, |
| .get_sm_version = elan_smbus_get_sm_version, |
| .get_product_id = elan_smbus_get_product_id, |
| .get_checksum = elan_smbus_get_checksum, |
| .get_pressure_adjustment = elan_smbus_get_pressure_adjustment, |
| |
| .get_max = elan_smbus_get_max, |
| .get_resolution = elan_smbus_get_resolution, |
| .get_num_traces = elan_smbus_get_num_traces, |
| |
| .iap_get_mode = elan_smbus_iap_get_mode, |
| .iap_reset = elan_smbus_iap_reset, |
| |
| .prepare_fw_update = elan_smbus_prepare_fw_update, |
| .write_fw_block = elan_smbus_write_fw_block, |
| .finish_fw_update = elan_smbus_finish_fw_update, |
| |
| .get_report = elan_smbus_get_report, |
| }; |