| /* |
| * rcar_du_lvdscon.c -- R-Car Display Unit LVDS Connector |
| * |
| * Copyright (C) 2013-2014 Renesas Electronics Corporation |
| * |
| * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_crtc_helper.h> |
| |
| #include <video/display_timing.h> |
| #include <video/of_display_timing.h> |
| #include <video/videomode.h> |
| |
| #include "rcar_du_drv.h" |
| #include "rcar_du_encoder.h" |
| #include "rcar_du_kms.h" |
| #include "rcar_du_lvdscon.h" |
| |
| struct rcar_du_lvds_connector { |
| struct rcar_du_connector connector; |
| |
| struct { |
| unsigned int width_mm; /* Panel width in mm */ |
| unsigned int height_mm; /* Panel height in mm */ |
| struct videomode mode; |
| } panel; |
| }; |
| |
| #define to_rcar_lvds_connector(c) \ |
| container_of(c, struct rcar_du_lvds_connector, connector.connector) |
| |
| static int rcar_du_lvds_connector_get_modes(struct drm_connector *connector) |
| { |
| struct rcar_du_lvds_connector *lvdscon = |
| to_rcar_lvds_connector(connector); |
| struct drm_display_mode *mode; |
| |
| mode = drm_mode_create(connector->dev); |
| if (mode == NULL) |
| return 0; |
| |
| mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER; |
| |
| drm_display_mode_from_videomode(&lvdscon->panel.mode, mode); |
| |
| drm_mode_probed_add(connector, mode); |
| |
| return 1; |
| } |
| |
| static const struct drm_connector_helper_funcs connector_helper_funcs = { |
| .get_modes = rcar_du_lvds_connector_get_modes, |
| .best_encoder = rcar_du_connector_best_encoder, |
| }; |
| |
| static enum drm_connector_status |
| rcar_du_lvds_connector_detect(struct drm_connector *connector, bool force) |
| { |
| return connector_status_connected; |
| } |
| |
| static const struct drm_connector_funcs connector_funcs = { |
| .dpms = drm_atomic_helper_connector_dpms, |
| .reset = drm_atomic_helper_connector_reset, |
| .detect = rcar_du_lvds_connector_detect, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = drm_connector_cleanup, |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| }; |
| |
| int rcar_du_lvds_connector_init(struct rcar_du_device *rcdu, |
| struct rcar_du_encoder *renc, |
| /* TODO const */ struct device_node *np) |
| { |
| struct drm_encoder *encoder = rcar_encoder_to_drm_encoder(renc); |
| struct rcar_du_lvds_connector *lvdscon; |
| struct drm_connector *connector; |
| struct display_timing timing; |
| int ret; |
| |
| lvdscon = devm_kzalloc(rcdu->dev, sizeof(*lvdscon), GFP_KERNEL); |
| if (lvdscon == NULL) |
| return -ENOMEM; |
| |
| ret = of_get_display_timing(np, "panel-timing", &timing); |
| if (ret < 0) |
| return ret; |
| |
| videomode_from_timing(&timing, &lvdscon->panel.mode); |
| |
| of_property_read_u32(np, "width-mm", &lvdscon->panel.width_mm); |
| of_property_read_u32(np, "height-mm", &lvdscon->panel.height_mm); |
| |
| connector = &lvdscon->connector.connector; |
| connector->display_info.width_mm = lvdscon->panel.width_mm; |
| connector->display_info.height_mm = lvdscon->panel.height_mm; |
| |
| ret = drm_connector_init(rcdu->ddev, connector, &connector_funcs, |
| DRM_MODE_CONNECTOR_LVDS); |
| if (ret < 0) |
| return ret; |
| |
| drm_connector_helper_add(connector, &connector_helper_funcs); |
| |
| connector->dpms = DRM_MODE_DPMS_OFF; |
| drm_object_property_set_value(&connector->base, |
| rcdu->ddev->mode_config.dpms_property, DRM_MODE_DPMS_OFF); |
| |
| ret = drm_mode_connector_attach_encoder(connector, encoder); |
| if (ret < 0) |
| return ret; |
| |
| lvdscon->connector.encoder = renc; |
| |
| return 0; |
| } |