arch/x86/crypto/crct10dif-pcl-asm_64.S - kernel/quantenna - Git at Google

 ########################################################################
 # Implement fast CRC-T10DIF computation with SSE and PCLMULQDQ instructions
 #
 # Copyright (c) 2013, Intel Corporation
 #
 # Authors:
 #     Erdinc Ozturk <erdinc.ozturk@intel.com>
 #     Vinodh Gopal <vinodh.gopal@intel.com>
 #     James Guilford <james.guilford@intel.com>
 #     Tim Chen <tim.c.chen@linux.intel.com>
 #
 # This software is available to you under a choice of one of two
 # licenses.  You may choose to be licensed under the terms of the GNU
 # General Public License (GPL) Version 2, available from the file
 # COPYING in the main directory of this source tree, or the
 # OpenIB.org BSD license below:
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are
 # met:
 #
 # * Redistributions of source code must retain the above copyright
 #   notice, this list of conditions and the following disclaimer.
 #
 # * Redistributions in binary form must reproduce the above copyright
 #   notice, this list of conditions and the following disclaimer in the
 #   documentation and/or other materials provided with the
 #   distribution.
 #
 # * Neither the name of the Intel Corporation nor the names of its
 #   contributors may be used to endorse or promote products derived from
 #   this software without specific prior written permission.
 #
 #
 # THIS SOFTWARE IS PROVIDED BY INTEL CORPORATION ""AS IS"" AND ANY
 # EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 # PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL CORPORATION OR
 # CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 # PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 # PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 # LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 ########################################################################
 #       Function API:
 #       UINT16 crc_t10dif_pcl(
 #               UINT16 init_crc, //initial CRC value, 16 bits
 #               const unsigned char *buf, //buffer pointer to calculate CRC on
 #               UINT64 len //buffer length in bytes (64-bit data)
 #       );
 #
 #       Reference paper titled "Fast CRC Computation for Generic
 #	Polynomials Using PCLMULQDQ Instruction"
 #       URL: http://www.intel.com/content/dam/www/public/us/en/documents
 #  /white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf
 #
 #

 #include <linux/linkage.h>

 .text

 #define        arg1 %rdi
 #define        arg2 %rsi
 #define        arg3 %rdx

 #define        arg1_low32 %edi

 ENTRY(crc_t10dif_pcl)
 .align 16

 	# adjust the 16-bit initial_crc value, scale it to 32 bits
 	shl	$16, arg1_low32

 	# Allocate Stack Space
 	mov     %rsp, %rcx
 	sub	$16*2, %rsp
 	# align stack to 16 byte boundary
 	and     $~(0x10 - 1), %rsp

 	# check if smaller than 256
 	cmp	$256, arg3

 	# for sizes less than 128, we can't fold 64B at a time...
 	jl	_less_than_128


 	# load the initial crc value
 	movd	arg1_low32, %xmm10	# initial crc

 	# crc value does not need to be byte-reflected, but it needs
 	# to be moved to the high part of the register.
 	# because data will be byte-reflected and will align with
 	# initial crc at correct place.
 	pslldq	$12, %xmm10

 	movdqa  SHUF_MASK(%rip), %xmm11
 	# receive the initial 64B data, xor the initial crc value
 	movdqu	16*0(arg2), %xmm0
 	movdqu	16*1(arg2), %xmm1
 	movdqu	16*2(arg2), %xmm2
 	movdqu	16*3(arg2), %xmm3
 	movdqu	16*4(arg2), %xmm4
 	movdqu	16*5(arg2), %xmm5
 	movdqu	16*6(arg2), %xmm6
 	movdqu	16*7(arg2), %xmm7

 	pshufb	%xmm11, %xmm0
 	# XOR the initial_crc value
 	pxor	%xmm10, %xmm0
 	pshufb	%xmm11, %xmm1
 	pshufb	%xmm11, %xmm2
 	pshufb	%xmm11, %xmm3
 	pshufb	%xmm11, %xmm4
 	pshufb	%xmm11, %xmm5
 	pshufb	%xmm11, %xmm6
 	pshufb	%xmm11, %xmm7

 	movdqa	rk3(%rip), %xmm10	#xmm10 has rk3 and rk4
 					#imm value of pclmulqdq instruction
 					#will determine which constant to use

 	#################################################################
 	# we subtract 256 instead of 128 to save one instruction from the loop
 	sub	$256, arg3

 	# at this section of the code, there is 64*x+y (0<=y<64) bytes of
 	# buffer. The _fold_64_B_loop will fold 64B at a time
 	# until we have 64+y Bytes of buffer


 	# fold 64B at a time. This section of the code folds 4 xmm
 	# registers in parallel
 _fold_64_B_loop:

 	# update the buffer pointer
 	add	$128, arg2		#    buf += 64#

 	movdqu	16*0(arg2), %xmm9
 	movdqu	16*1(arg2), %xmm12
 	pshufb	%xmm11, %xmm9
 	pshufb	%xmm11, %xmm12
 	movdqa	%xmm0, %xmm8
 	movdqa	%xmm1, %xmm13
 	pclmulqdq	$0x0 , %xmm10, %xmm0
 	pclmulqdq	$0x11, %xmm10, %xmm8
 	pclmulqdq	$0x0 , %xmm10, %xmm1
 	pclmulqdq	$0x11, %xmm10, %xmm13
 	pxor	%xmm9 , %xmm0
 	xorps	%xmm8 , %xmm0
 	pxor	%xmm12, %xmm1
 	xorps	%xmm13, %xmm1

 	movdqu	16*2(arg2), %xmm9
 	movdqu	16*3(arg2), %xmm12
 	pshufb	%xmm11, %xmm9
 	pshufb	%xmm11, %xmm12
 	movdqa	%xmm2, %xmm8
 	movdqa	%xmm3, %xmm13
 	pclmulqdq	$0x0, %xmm10, %xmm2
 	pclmulqdq	$0x11, %xmm10, %xmm8
 	pclmulqdq	$0x0, %xmm10, %xmm3
 	pclmulqdq	$0x11, %xmm10, %xmm13
 	pxor	%xmm9 , %xmm2
 	xorps	%xmm8 , %xmm2
 	pxor	%xmm12, %xmm3
 	xorps	%xmm13, %xmm3

 	movdqu	16*4(arg2), %xmm9
 	movdqu	16*5(arg2), %xmm12
 	pshufb	%xmm11, %xmm9
 	pshufb	%xmm11, %xmm12
 	movdqa	%xmm4, %xmm8
 	movdqa	%xmm5, %xmm13
 	pclmulqdq	$0x0,  %xmm10, %xmm4
 	pclmulqdq	$0x11, %xmm10, %xmm8
 	pclmulqdq	$0x0,  %xmm10, %xmm5
 	pclmulqdq	$0x11, %xmm10, %xmm13
 	pxor	%xmm9 ,  %xmm4
 	xorps	%xmm8 ,  %xmm4
 	pxor	%xmm12,  %xmm5
 	xorps	%xmm13,  %xmm5

 	movdqu	16*6(arg2), %xmm9
 	movdqu	16*7(arg2), %xmm12
 	pshufb	%xmm11, %xmm9
 	pshufb	%xmm11, %xmm12
 	movdqa	%xmm6 , %xmm8
 	movdqa	%xmm7 , %xmm13
 	pclmulqdq	$0x0 , %xmm10, %xmm6
 	pclmulqdq	$0x11, %xmm10, %xmm8
 	pclmulqdq	$0x0 , %xmm10, %xmm7
 	pclmulqdq	$0x11, %xmm10, %xmm13
 	pxor	%xmm9 , %xmm6
 	xorps	%xmm8 , %xmm6
 	pxor	%xmm12, %xmm7
 	xorps	%xmm13, %xmm7

 	sub	$128, arg3

 	# check if there is another 64B in the buffer to be able to fold
 	jge	_fold_64_B_loop
 	##################################################################


 	add	$128, arg2
 	# at this point, the buffer pointer is pointing at the last y Bytes
 	# of the buffer the 64B of folded data is in 4 of the xmm
 	# registers: xmm0, xmm1, xmm2, xmm3


 	# fold the 8 xmm registers to 1 xmm register with different constants

 	movdqa	rk9(%rip), %xmm10
 	movdqa	%xmm0, %xmm8
 	pclmulqdq	$0x11, %xmm10, %xmm0
 	pclmulqdq	$0x0 , %xmm10, %xmm8
 	pxor	%xmm8, %xmm7
 	xorps	%xmm0, %xmm7

 	movdqa	rk11(%rip), %xmm10
 	movdqa	%xmm1, %xmm8
 	pclmulqdq	 $0x11, %xmm10, %xmm1
 	pclmulqdq	 $0x0 , %xmm10, %xmm8
 	pxor	%xmm8, %xmm7
 	xorps	%xmm1, %xmm7

 	movdqa	rk13(%rip), %xmm10
 	movdqa	%xmm2, %xmm8
 	pclmulqdq	 $0x11, %xmm10, %xmm2
 	pclmulqdq	 $0x0 , %xmm10, %xmm8
 	pxor	%xmm8, %xmm7
 	pxor	%xmm2, %xmm7

 	movdqa	rk15(%rip), %xmm10
 	movdqa	%xmm3, %xmm8
 	pclmulqdq	$0x11, %xmm10, %xmm3
 	pclmulqdq	$0x0 , %xmm10, %xmm8
 	pxor	%xmm8, %xmm7
 	xorps	%xmm3, %xmm7

 	movdqa	rk17(%rip), %xmm10
 	movdqa	%xmm4, %xmm8
 	pclmulqdq	$0x11, %xmm10, %xmm4
 	pclmulqdq	$0x0 , %xmm10, %xmm8
 	pxor	%xmm8, %xmm7
 	pxor	%xmm4, %xmm7

 	movdqa	rk19(%rip), %xmm10
 	movdqa	%xmm5, %xmm8
 	pclmulqdq	$0x11, %xmm10, %xmm5
 	pclmulqdq	$0x0 , %xmm10, %xmm8
 	pxor	%xmm8, %xmm7
 	xorps	%xmm5, %xmm7

 	movdqa	rk1(%rip), %xmm10	#xmm10 has rk1 and rk2
 					#imm value of pclmulqdq instruction
 					#will determine which constant to use
 	movdqa	%xmm6, %xmm8
 	pclmulqdq	$0x11, %xmm10, %xmm6
 	pclmulqdq	$0x0 , %xmm10, %xmm8
 	pxor	%xmm8, %xmm7
 	pxor	%xmm6, %xmm7


 	# instead of 64, we add 48 to the loop counter to save 1 instruction
 	# from the loop instead of a cmp instruction, we use the negative
 	# flag with the jl instruction
 	add	$128-16, arg3
 	jl	_final_reduction_for_128

 	# now we have 16+y bytes left to reduce. 16 Bytes is in register xmm7
 	# and the rest is in memory. We can fold 16 bytes at a time if y>=16
 	# continue folding 16B at a time

 _16B_reduction_loop:
 	movdqa	%xmm7, %xmm8
 	pclmulqdq	$0x11, %xmm10, %xmm7
 	pclmulqdq	$0x0 , %xmm10, %xmm8
 	pxor	%xmm8, %xmm7
 	movdqu	(arg2), %xmm0
 	pshufb	%xmm11, %xmm0
 	pxor	%xmm0 , %xmm7
 	add	$16, arg2
 	sub	$16, arg3
 	# instead of a cmp instruction, we utilize the flags with the
 	# jge instruction equivalent of: cmp arg3, 16-16
 	# check if there is any more 16B in the buffer to be able to fold
 	jge	_16B_reduction_loop

 	#now we have 16+z bytes left to reduce, where 0<= z < 16.
 	#first, we reduce the data in the xmm7 register


 _final_reduction_for_128:
 	# check if any more data to fold. If not, compute the CRC of
 	# the final 128 bits
 	add	$16, arg3
 	je	_128_done

 	# here we are getting data that is less than 16 bytes.
 	# since we know that there was data before the pointer, we can
 	# offset the input pointer before the actual point, to receive
 	# exactly 16 bytes. after that the registers need to be adjusted.
 _get_last_two_xmms:
 	movdqa	%xmm7, %xmm2

 	movdqu	-16(arg2, arg3), %xmm1
 	pshufb	%xmm11, %xmm1

 	# get rid of the extra data that was loaded before
 	# load the shift constant
 	lea	pshufb_shf_table+16(%rip), %rax
 	sub	arg3, %rax
 	movdqu	(%rax), %xmm0

 	# shift xmm2 to the left by arg3 bytes
 	pshufb	%xmm0, %xmm2

 	# shift xmm7 to the right by 16-arg3 bytes
 	pxor	mask1(%rip), %xmm0
 	pshufb	%xmm0, %xmm7
 	pblendvb	%xmm2, %xmm1	#xmm0 is implicit

 	# fold 16 Bytes
 	movdqa	%xmm1, %xmm2
 	movdqa	%xmm7, %xmm8
 	pclmulqdq	$0x11, %xmm10, %xmm7
 	pclmulqdq	$0x0 , %xmm10, %xmm8
 	pxor	%xmm8, %xmm7
 	pxor	%xmm2, %xmm7

 _128_done:
 	# compute crc of a 128-bit value
 	movdqa	rk5(%rip), %xmm10	# rk5 and rk6 in xmm10
 	movdqa	%xmm7, %xmm0

 	#64b fold
 	pclmulqdq	$0x1, %xmm10, %xmm7
 	pslldq	$8   ,  %xmm0
 	pxor	%xmm0,  %xmm7

 	#32b fold
 	movdqa	%xmm7, %xmm0

 	pand	mask2(%rip), %xmm0

 	psrldq	$12, %xmm7
 	pclmulqdq	$0x10, %xmm10, %xmm7
 	pxor	%xmm0, %xmm7

 	#barrett reduction
 _barrett:
 	movdqa	rk7(%rip), %xmm10	# rk7 and rk8 in xmm10
 	movdqa	%xmm7, %xmm0
 	pclmulqdq	$0x01, %xmm10, %xmm7
 	pslldq	$4, %xmm7
 	pclmulqdq	$0x11, %xmm10, %xmm7

 	pslldq	$4, %xmm7
 	pxor	%xmm0, %xmm7
 	pextrd	$1, %xmm7, %eax

 _cleanup:
 	# scale the result back to 16 bits
 	shr	$16, %eax
 	mov     %rcx, %rsp
 	ret

 ########################################################################

 .align 16
 _less_than_128:

 	# check if there is enough buffer to be able to fold 16B at a time
 	cmp	$32, arg3
 	jl	_less_than_32
 	movdqa  SHUF_MASK(%rip), %xmm11

 	# now if there is, load the constants
 	movdqa	rk1(%rip), %xmm10	# rk1 and rk2 in xmm10

 	movd	arg1_low32, %xmm0	# get the initial crc value
 	pslldq	$12, %xmm0	# align it to its correct place
 	movdqu	(arg2), %xmm7	# load the plaintext
 	pshufb	%xmm11, %xmm7	# byte-reflect the plaintext
 	pxor	%xmm0, %xmm7


 	# update the buffer pointer
 	add	$16, arg2

 	# update the counter. subtract 32 instead of 16 to save one
 	# instruction from the loop
 	sub	$32, arg3

 	jmp	_16B_reduction_loop


 .align 16
 _less_than_32:
 	# mov initial crc to the return value. this is necessary for
 	# zero-length buffers.
 	mov	arg1_low32, %eax
 	test	arg3, arg3
 	je	_cleanup

 	movdqa  SHUF_MASK(%rip), %xmm11

 	movd	arg1_low32, %xmm0	# get the initial crc value
 	pslldq	$12, %xmm0	# align it to its correct place

 	cmp	$16, arg3
 	je	_exact_16_left
 	jl	_less_than_16_left

 	movdqu	(arg2), %xmm7	# load the plaintext
 	pshufb	%xmm11, %xmm7	# byte-reflect the plaintext
 	pxor	%xmm0 , %xmm7	# xor the initial crc value
 	add	$16, arg2
 	sub	$16, arg3
 	movdqa	rk1(%rip), %xmm10	# rk1 and rk2 in xmm10
 	jmp	_get_last_two_xmms


 .align 16
 _less_than_16_left:
 	# use stack space to load data less than 16 bytes, zero-out
 	# the 16B in memory first.

 	pxor	%xmm1, %xmm1
 	mov	%rsp, %r11
 	movdqa	%xmm1, (%r11)

 	cmp	$4, arg3
 	jl	_only_less_than_4

 	# backup the counter value
 	mov	arg3, %r9
 	cmp	$8, arg3
 	jl	_less_than_8_left

 	# load 8 Bytes
 	mov	(arg2), %rax
 	mov	%rax, (%r11)
 	add	$8, %r11
 	sub	$8, arg3
 	add	$8, arg2
 _less_than_8_left:

 	cmp	$4, arg3
 	jl	_less_than_4_left

 	# load 4 Bytes
 	mov	(arg2), %eax
 	mov	%eax, (%r11)
 	add	$4, %r11
 	sub	$4, arg3
 	add	$4, arg2
 _less_than_4_left:

 	cmp	$2, arg3
 	jl	_less_than_2_left

 	# load 2 Bytes
 	mov	(arg2), %ax
 	mov	%ax, (%r11)
 	add	$2, %r11
 	sub	$2, arg3
 	add	$2, arg2
 _less_than_2_left:
 	cmp     $1, arg3
         jl      _zero_left

 	# load 1 Byte
 	mov	(arg2), %al
 	mov	%al, (%r11)
 _zero_left:
 	movdqa	(%rsp), %xmm7
 	pshufb	%xmm11, %xmm7
 	pxor	%xmm0 , %xmm7	# xor the initial crc value

 	# shl r9, 4
 	lea	pshufb_shf_table+16(%rip), %rax
 	sub	%r9, %rax
 	movdqu	(%rax), %xmm0
 	pxor	mask1(%rip), %xmm0

 	pshufb	%xmm0, %xmm7
 	jmp	_128_done

 .align 16
 _exact_16_left:
 	movdqu	(arg2), %xmm7
 	pshufb	%xmm11, %xmm7
 	pxor	%xmm0 , %xmm7   # xor the initial crc value

 	jmp	_128_done

 _only_less_than_4:
 	cmp	$3, arg3
 	jl	_only_less_than_3

 	# load 3 Bytes
 	mov	(arg2), %al
 	mov	%al, (%r11)

 	mov	1(arg2), %al
 	mov	%al, 1(%r11)

 	mov	2(arg2), %al
 	mov	%al, 2(%r11)

 	movdqa	 (%rsp), %xmm7
 	pshufb	 %xmm11, %xmm7
 	pxor	 %xmm0 , %xmm7  # xor the initial crc value

 	psrldq	$5, %xmm7

 	jmp	_barrett
 _only_less_than_3:
 	cmp	$2, arg3
 	jl	_only_less_than_2

 	# load 2 Bytes
 	mov	(arg2), %al
 	mov	%al, (%r11)

 	mov	1(arg2), %al
 	mov	%al, 1(%r11)

 	movdqa	(%rsp), %xmm7
 	pshufb	%xmm11, %xmm7
 	pxor	%xmm0 , %xmm7   # xor the initial crc value

 	psrldq	$6, %xmm7

 	jmp	_barrett
 _only_less_than_2:

 	# load 1 Byte
 	mov	(arg2), %al
 	mov	%al, (%r11)

 	movdqa	(%rsp), %xmm7
 	pshufb	%xmm11, %xmm7
 	pxor	%xmm0 , %xmm7   # xor the initial crc value

 	psrldq	$7, %xmm7

 	jmp	_barrett

 ENDPROC(crc_t10dif_pcl)

 .data

 # precomputed constants
 # these constants are precomputed from the poly:
 # 0x8bb70000 (0x8bb7 scaled to 32 bits)
 .align 16
 # Q = 0x18BB70000
 # rk1 = 2^(32*3) mod Q << 32
 # rk2 = 2^(32*5) mod Q << 32
 # rk3 = 2^(32*15) mod Q << 32
 # rk4 = 2^(32*17) mod Q << 32
 # rk5 = 2^(32*3) mod Q << 32
 # rk6 = 2^(32*2) mod Q << 32
 # rk7 = floor(2^64/Q)
 # rk8 = Q
 rk1:
 .quad 0x2d56000000000000
 rk2:
 .quad 0x06df000000000000
 rk3:
 .quad 0x9d9d000000000000
 rk4:
 .quad 0x7cf5000000000000
 rk5:
 .quad 0x2d56000000000000
 rk6:
 .quad 0x1368000000000000
 rk7:
 .quad 0x00000001f65a57f8
 rk8:
 .quad 0x000000018bb70000

 rk9:
 .quad 0xceae000000000000
 rk10:
 .quad 0xbfd6000000000000
 rk11:
 .quad 0x1e16000000000000
 rk12:
 .quad 0x713c000000000000
 rk13:
 .quad 0xf7f9000000000000
 rk14:
 .quad 0x80a6000000000000
 rk15:
 .quad 0x044c000000000000
 rk16:
 .quad 0xe658000000000000
 rk17:
 .quad 0xad18000000000000
 rk18:
 .quad 0xa497000000000000
 rk19:
 .quad 0x6ee3000000000000
 rk20:
 .quad 0xe7b5000000000000


 mask1:
 .octa 0x80808080808080808080808080808080
 mask2:
 .octa 0x00000000FFFFFFFFFFFFFFFFFFFFFFFF

 SHUF_MASK:
 .octa 0x000102030405060708090A0B0C0D0E0F

 pshufb_shf_table:
 # use these values for shift constants for the pshufb instruction
 # different alignments result in values as shown:
 #	DDQ 0x008f8e8d8c8b8a898887868584838281 # shl 15 (16-1) / shr1
 #	DDQ 0x01008f8e8d8c8b8a8988878685848382 # shl 14 (16-3) / shr2
 #	DDQ 0x0201008f8e8d8c8b8a89888786858483 # shl 13 (16-4) / shr3
 #	DDQ 0x030201008f8e8d8c8b8a898887868584 # shl 12 (16-4) / shr4
 #	DDQ 0x04030201008f8e8d8c8b8a8988878685 # shl 11 (16-5) / shr5
 #	DDQ 0x0504030201008f8e8d8c8b8a89888786 # shl 10 (16-6) / shr6
 #	DDQ 0x060504030201008f8e8d8c8b8a898887 # shl 9  (16-7) / shr7
 #	DDQ 0x07060504030201008f8e8d8c8b8a8988 # shl 8  (16-8) / shr8
 #	DDQ 0x0807060504030201008f8e8d8c8b8a89 # shl 7  (16-9) / shr9
 #	DDQ 0x090807060504030201008f8e8d8c8b8a # shl 6  (16-10) / shr10
 #	DDQ 0x0a090807060504030201008f8e8d8c8b # shl 5  (16-11) / shr11
 #	DDQ 0x0b0a090807060504030201008f8e8d8c # shl 4  (16-12) / shr12
 #	DDQ 0x0c0b0a090807060504030201008f8e8d # shl 3  (16-13) / shr13
 #	DDQ 0x0d0c0b0a090807060504030201008f8e # shl 2  (16-14) / shr14
 #	DDQ 0x0e0d0c0b0a090807060504030201008f # shl 1  (16-15) / shr15
 .octa 0x8f8e8d8c8b8a89888786858483828100
 .octa 0x000e0d0c0b0a09080706050403020100
	########################################################################
	# Implement fast CRC-T10DIF computation with SSE and PCLMULQDQ instructions
	#
	# Copyright (c) 2013, Intel Corporation
	#
	# Authors:
	# Erdinc Ozturk <erdinc.ozturk@intel.com>
	# Vinodh Gopal <vinodh.gopal@intel.com>
	# James Guilford <james.guilford@intel.com>
	# Tim Chen <tim.c.chen@linux.intel.com>
	#
	# This software is available to you under a choice of one of two
	# licenses. You may choose to be licensed under the terms of the GNU
	# General Public License (GPL) Version 2, available from the file
	# COPYING in the main directory of this source tree, or the
	# OpenIB.org BSD license below:
	#
	# Redistribution and use in source and binary forms, with or without
	# modification, are permitted provided that the following conditions are
	# met:
	#
	# * Redistributions of source code must retain the above copyright
	# notice, this list of conditions and the following disclaimer.
	#
	# * Redistributions in binary form must reproduce the above copyright
	# notice, this list of conditions and the following disclaimer in the
	# documentation and/or other materials provided with the
	# distribution.
	#
	# * Neither the name of the Intel Corporation nor the names of its
	# contributors may be used to endorse or promote products derived from
	# this software without specific prior written permission.
	#
	#
	# THIS SOFTWARE IS PROVIDED BY INTEL CORPORATION ""AS IS"" AND ANY
	# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
	# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL CORPORATION OR
	# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
	# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
	# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
	# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
	# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
	# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
	# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	########################################################################
	# Function API:
	# UINT16 crc_t10dif_pcl(
	# UINT16 init_crc, //initial CRC value, 16 bits
	# const unsigned char *buf, //buffer pointer to calculate CRC on
	# UINT64 len //buffer length in bytes (64-bit data)
	# );
	#
	# Reference paper titled "Fast CRC Computation for Generic
	# Polynomials Using PCLMULQDQ Instruction"
	# URL: http://www.intel.com/content/dam/www/public/us/en/documents
	# /white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf
	#
	#

	#include <linux/linkage.h>

	.text

	#define arg1 %rdi
	#define arg2 %rsi
	#define arg3 %rdx

	#define arg1_low32 %edi

	ENTRY(crc_t10dif_pcl)
	.align 16

	# adjust the 16-bit initial_crc value, scale it to 32 bits
	shl $16, arg1_low32

	# Allocate Stack Space
	mov %rsp, %rcx
	sub $16*2, %rsp
	# align stack to 16 byte boundary
	and $~(0x10 - 1), %rsp

	# check if smaller than 256
	cmp $256, arg3

	# for sizes less than 128, we can't fold 64B at a time...
	jl _less_than_128


	# load the initial crc value
	movd arg1_low32, %xmm10 # initial crc

	# crc value does not need to be byte-reflected, but it needs
	# to be moved to the high part of the register.
	# because data will be byte-reflected and will align with
	# initial crc at correct place.
	pslldq $12, %xmm10

	movdqa SHUF_MASK(%rip), %xmm11
	# receive the initial 64B data, xor the initial crc value
	movdqu 16*0(arg2), %xmm0
	movdqu 16*1(arg2), %xmm1
	movdqu 16*2(arg2), %xmm2
	movdqu 16*3(arg2), %xmm3
	movdqu 16*4(arg2), %xmm4
	movdqu 16*5(arg2), %xmm5
	movdqu 16*6(arg2), %xmm6
	movdqu 16*7(arg2), %xmm7

	pshufb %xmm11, %xmm0
	# XOR the initial_crc value
	pxor %xmm10, %xmm0
	pshufb %xmm11, %xmm1
	pshufb %xmm11, %xmm2
	pshufb %xmm11, %xmm3
	pshufb %xmm11, %xmm4
	pshufb %xmm11, %xmm5
	pshufb %xmm11, %xmm6
	pshufb %xmm11, %xmm7

	movdqa rk3(%rip), %xmm10 #xmm10 has rk3 and rk4
	#imm value of pclmulqdq instruction
	#will determine which constant to use

	#################################################################
	# we subtract 256 instead of 128 to save one instruction from the loop
	sub $256, arg3

	# at this section of the code, there is 64*x+y (0<=y<64) bytes of
	# buffer. The _fold_64_B_loop will fold 64B at a time
	# until we have 64+y Bytes of buffer


	# fold 64B at a time. This section of the code folds 4 xmm
	# registers in parallel
	_fold_64_B_loop:

	# update the buffer pointer
	add $128, arg2 # buf += 64#

	movdqu 16*0(arg2), %xmm9
	movdqu 16*1(arg2), %xmm12
	pshufb %xmm11, %xmm9
	pshufb %xmm11, %xmm12
	movdqa %xmm0, %xmm8
	movdqa %xmm1, %xmm13
	pclmulqdq $0x0 , %xmm10, %xmm0
	pclmulqdq $0x11, %xmm10, %xmm8
	pclmulqdq $0x0 , %xmm10, %xmm1
	pclmulqdq $0x11, %xmm10, %xmm13
	pxor %xmm9 , %xmm0
	xorps %xmm8 , %xmm0
	pxor %xmm12, %xmm1
	xorps %xmm13, %xmm1

	movdqu 16*2(arg2), %xmm9
	movdqu 16*3(arg2), %xmm12
	pshufb %xmm11, %xmm9
	pshufb %xmm11, %xmm12
	movdqa %xmm2, %xmm8
	movdqa %xmm3, %xmm13
	pclmulqdq $0x0, %xmm10, %xmm2
	pclmulqdq $0x11, %xmm10, %xmm8
	pclmulqdq $0x0, %xmm10, %xmm3
	pclmulqdq $0x11, %xmm10, %xmm13
	pxor %xmm9 , %xmm2
	xorps %xmm8 , %xmm2
	pxor %xmm12, %xmm3
	xorps %xmm13, %xmm3

	movdqu 16*4(arg2), %xmm9
	movdqu 16*5(arg2), %xmm12
	pshufb %xmm11, %xmm9
	pshufb %xmm11, %xmm12
	movdqa %xmm4, %xmm8
	movdqa %xmm5, %xmm13
	pclmulqdq $0x0, %xmm10, %xmm4
	pclmulqdq $0x11, %xmm10, %xmm8
	pclmulqdq $0x0, %xmm10, %xmm5
	pclmulqdq $0x11, %xmm10, %xmm13
	pxor %xmm9 , %xmm4
	xorps %xmm8 , %xmm4
	pxor %xmm12, %xmm5
	xorps %xmm13, %xmm5

	movdqu 16*6(arg2), %xmm9
	movdqu 16*7(arg2), %xmm12
	pshufb %xmm11, %xmm9
	pshufb %xmm11, %xmm12
	movdqa %xmm6 , %xmm8
	movdqa %xmm7 , %xmm13
	pclmulqdq $0x0 , %xmm10, %xmm6
	pclmulqdq $0x11, %xmm10, %xmm8
	pclmulqdq $0x0 , %xmm10, %xmm7
	pclmulqdq $0x11, %xmm10, %xmm13
	pxor %xmm9 , %xmm6
	xorps %xmm8 , %xmm6
	pxor %xmm12, %xmm7
	xorps %xmm13, %xmm7

	sub $128, arg3

	# check if there is another 64B in the buffer to be able to fold
	jge _fold_64_B_loop
	##################################################################


	add $128, arg2
	# at this point, the buffer pointer is pointing at the last y Bytes
	# of the buffer the 64B of folded data is in 4 of the xmm
	# registers: xmm0, xmm1, xmm2, xmm3


	# fold the 8 xmm registers to 1 xmm register with different constants

	movdqa rk9(%rip), %xmm10
	movdqa %xmm0, %xmm8
	pclmulqdq $0x11, %xmm10, %xmm0
	pclmulqdq $0x0 , %xmm10, %xmm8
	pxor %xmm8, %xmm7
	xorps %xmm0, %xmm7

	movdqa rk11(%rip), %xmm10
	movdqa %xmm1, %xmm8
	pclmulqdq $0x11, %xmm10, %xmm1
	pclmulqdq $0x0 , %xmm10, %xmm8
	pxor %xmm8, %xmm7
	xorps %xmm1, %xmm7

	movdqa rk13(%rip), %xmm10
	movdqa %xmm2, %xmm8
	pclmulqdq $0x11, %xmm10, %xmm2
	pclmulqdq $0x0 , %xmm10, %xmm8
	pxor %xmm8, %xmm7
	pxor %xmm2, %xmm7

	movdqa rk15(%rip), %xmm10
	movdqa %xmm3, %xmm8
	pclmulqdq $0x11, %xmm10, %xmm3
	pclmulqdq $0x0 , %xmm10, %xmm8
	pxor %xmm8, %xmm7
	xorps %xmm3, %xmm7

	movdqa rk17(%rip), %xmm10
	movdqa %xmm4, %xmm8
	pclmulqdq $0x11, %xmm10, %xmm4
	pclmulqdq $0x0 , %xmm10, %xmm8
	pxor %xmm8, %xmm7
	pxor %xmm4, %xmm7

	movdqa rk19(%rip), %xmm10
	movdqa %xmm5, %xmm8
	pclmulqdq $0x11, %xmm10, %xmm5
	pclmulqdq $0x0 , %xmm10, %xmm8
	pxor %xmm8, %xmm7
	xorps %xmm5, %xmm7

	movdqa rk1(%rip), %xmm10 #xmm10 has rk1 and rk2
	#imm value of pclmulqdq instruction
	#will determine which constant to use
	movdqa %xmm6, %xmm8
	pclmulqdq $0x11, %xmm10, %xmm6
	pclmulqdq $0x0 , %xmm10, %xmm8
	pxor %xmm8, %xmm7
	pxor %xmm6, %xmm7


	# instead of 64, we add 48 to the loop counter to save 1 instruction
	# from the loop instead of a cmp instruction, we use the negative
	# flag with the jl instruction
	add $128-16, arg3
	jl _final_reduction_for_128

	# now we have 16+y bytes left to reduce. 16 Bytes is in register xmm7
	# and the rest is in memory. We can fold 16 bytes at a time if y>=16
	# continue folding 16B at a time

	_16B_reduction_loop:
	movdqa %xmm7, %xmm8
	pclmulqdq $0x11, %xmm10, %xmm7
	pclmulqdq $0x0 , %xmm10, %xmm8
	pxor %xmm8, %xmm7
	movdqu (arg2), %xmm0
	pshufb %xmm11, %xmm0
	pxor %xmm0 , %xmm7
	add $16, arg2
	sub $16, arg3
	# instead of a cmp instruction, we utilize the flags with the
	# jge instruction equivalent of: cmp arg3, 16-16
	# check if there is any more 16B in the buffer to be able to fold
	jge _16B_reduction_loop

	#now we have 16+z bytes left to reduce, where 0<= z < 16.
	#first, we reduce the data in the xmm7 register


	_final_reduction_for_128:
	# check if any more data to fold. If not, compute the CRC of
	# the final 128 bits
	add $16, arg3
	je _128_done

	# here we are getting data that is less than 16 bytes.
	# since we know that there was data before the pointer, we can
	# offset the input pointer before the actual point, to receive
	# exactly 16 bytes. after that the registers need to be adjusted.
	_get_last_two_xmms:
	movdqa %xmm7, %xmm2

	movdqu -16(arg2, arg3), %xmm1
	pshufb %xmm11, %xmm1

	# get rid of the extra data that was loaded before
	# load the shift constant
	lea pshufb_shf_table+16(%rip), %rax
	sub arg3, %rax
	movdqu (%rax), %xmm0

	# shift xmm2 to the left by arg3 bytes
	pshufb %xmm0, %xmm2

	# shift xmm7 to the right by 16-arg3 bytes
	pxor mask1(%rip), %xmm0
	pshufb %xmm0, %xmm7
	pblendvb %xmm2, %xmm1 #xmm0 is implicit

	# fold 16 Bytes
	movdqa %xmm1, %xmm2
	movdqa %xmm7, %xmm8
	pclmulqdq $0x11, %xmm10, %xmm7
	pclmulqdq $0x0 , %xmm10, %xmm8
	pxor %xmm8, %xmm7
	pxor %xmm2, %xmm7

	_128_done:
	# compute crc of a 128-bit value
	movdqa rk5(%rip), %xmm10 # rk5 and rk6 in xmm10
	movdqa %xmm7, %xmm0

	#64b fold
	pclmulqdq $0x1, %xmm10, %xmm7
	pslldq $8 , %xmm0
	pxor %xmm0, %xmm7

	#32b fold
	movdqa %xmm7, %xmm0

	pand mask2(%rip), %xmm0

	psrldq $12, %xmm7
	pclmulqdq $0x10, %xmm10, %xmm7
	pxor %xmm0, %xmm7

	#barrett reduction
	_barrett:
	movdqa rk7(%rip), %xmm10 # rk7 and rk8 in xmm10
	movdqa %xmm7, %xmm0
	pclmulqdq $0x01, %xmm10, %xmm7
	pslldq $4, %xmm7
	pclmulqdq $0x11, %xmm10, %xmm7

	pslldq $4, %xmm7
	pxor %xmm0, %xmm7
	pextrd $1, %xmm7, %eax

	_cleanup:
	# scale the result back to 16 bits
	shr $16, %eax
	mov %rcx, %rsp
	ret

	########################################################################

	.align 16
	_less_than_128:

	# check if there is enough buffer to be able to fold 16B at a time
	cmp $32, arg3
	jl _less_than_32
	movdqa SHUF_MASK(%rip), %xmm11

	# now if there is, load the constants
	movdqa rk1(%rip), %xmm10 # rk1 and rk2 in xmm10

	movd arg1_low32, %xmm0 # get the initial crc value
	pslldq $12, %xmm0 # align it to its correct place
	movdqu (arg2), %xmm7 # load the plaintext
	pshufb %xmm11, %xmm7 # byte-reflect the plaintext
	pxor %xmm0, %xmm7


	# update the buffer pointer
	add $16, arg2

	# update the counter. subtract 32 instead of 16 to save one
	# instruction from the loop
	sub $32, arg3

	jmp _16B_reduction_loop


	.align 16
	_less_than_32:
	# mov initial crc to the return value. this is necessary for
	# zero-length buffers.
	mov arg1_low32, %eax
	test arg3, arg3
	je _cleanup

	movdqa SHUF_MASK(%rip), %xmm11

	movd arg1_low32, %xmm0 # get the initial crc value
	pslldq $12, %xmm0 # align it to its correct place

	cmp $16, arg3
	je _exact_16_left
	jl _less_than_16_left

	movdqu (arg2), %xmm7 # load the plaintext
	pshufb %xmm11, %xmm7 # byte-reflect the plaintext
	pxor %xmm0 , %xmm7 # xor the initial crc value
	add $16, arg2
	sub $16, arg3
	movdqa rk1(%rip), %xmm10 # rk1 and rk2 in xmm10
	jmp _get_last_two_xmms


	.align 16
	_less_than_16_left:
	# use stack space to load data less than 16 bytes, zero-out
	# the 16B in memory first.

	pxor %xmm1, %xmm1
	mov %rsp, %r11
	movdqa %xmm1, (%r11)

	cmp $4, arg3
	jl _only_less_than_4

	# backup the counter value
	mov arg3, %r9
	cmp $8, arg3
	jl _less_than_8_left

	# load 8 Bytes
	mov (arg2), %rax
	mov %rax, (%r11)
	add $8, %r11
	sub $8, arg3
	add $8, arg2
	_less_than_8_left:

	cmp $4, arg3
	jl _less_than_4_left

	# load 4 Bytes
	mov (arg2), %eax
	mov %eax, (%r11)
	add $4, %r11
	sub $4, arg3
	add $4, arg2
	_less_than_4_left:

	cmp $2, arg3
	jl _less_than_2_left

	# load 2 Bytes
	mov (arg2), %ax
	mov %ax, (%r11)
	add $2, %r11
	sub $2, arg3
	add $2, arg2
	_less_than_2_left:
	cmp $1, arg3
	jl _zero_left

	# load 1 Byte
	mov (arg2), %al
	mov %al, (%r11)
	_zero_left:
	movdqa (%rsp), %xmm7
	pshufb %xmm11, %xmm7
	pxor %xmm0 , %xmm7 # xor the initial crc value

	# shl r9, 4
	lea pshufb_shf_table+16(%rip), %rax
	sub %r9, %rax
	movdqu (%rax), %xmm0
	pxor mask1(%rip), %xmm0

	pshufb %xmm0, %xmm7
	jmp _128_done

	.align 16
	_exact_16_left:
	movdqu (arg2), %xmm7
	pshufb %xmm11, %xmm7
	pxor %xmm0 , %xmm7 # xor the initial crc value

	jmp _128_done

	_only_less_than_4:
	cmp $3, arg3
	jl _only_less_than_3

	# load 3 Bytes
	mov (arg2), %al
	mov %al, (%r11)

	mov 1(arg2), %al
	mov %al, 1(%r11)

	mov 2(arg2), %al
	mov %al, 2(%r11)

	movdqa (%rsp), %xmm7
	pshufb %xmm11, %xmm7
	pxor %xmm0 , %xmm7 # xor the initial crc value

	psrldq $5, %xmm7

	jmp _barrett
	_only_less_than_3:
	cmp $2, arg3
	jl _only_less_than_2

	# load 2 Bytes
	mov (arg2), %al
	mov %al, (%r11)

	mov 1(arg2), %al
	mov %al, 1(%r11)

	movdqa (%rsp), %xmm7
	pshufb %xmm11, %xmm7
	pxor %xmm0 , %xmm7 # xor the initial crc value

	psrldq $6, %xmm7

	jmp _barrett
	_only_less_than_2:

	# load 1 Byte
	mov (arg2), %al
	mov %al, (%r11)

	movdqa (%rsp), %xmm7
	pshufb %xmm11, %xmm7
	pxor %xmm0 , %xmm7 # xor the initial crc value

	psrldq $7, %xmm7

	jmp _barrett

	ENDPROC(crc_t10dif_pcl)

	.data

	# precomputed constants
	# these constants are precomputed from the poly:
	# 0x8bb70000 (0x8bb7 scaled to 32 bits)
	.align 16
	# Q = 0x18BB70000
	# rk1 = 2^(32*3) mod Q << 32
	# rk2 = 2^(32*5) mod Q << 32
	# rk3 = 2^(32*15) mod Q << 32
	# rk4 = 2^(32*17) mod Q << 32
	# rk5 = 2^(32*3) mod Q << 32
	# rk6 = 2^(32*2) mod Q << 32
	# rk7 = floor(2^64/Q)
	# rk8 = Q
	rk1:
	.quad 0x2d56000000000000
	rk2:
	.quad 0x06df000000000000
	rk3:
	.quad 0x9d9d000000000000
	rk4:
	.quad 0x7cf5000000000000
	rk5:
	.quad 0x2d56000000000000
	rk6:
	.quad 0x1368000000000000
	rk7:
	.quad 0x00000001f65a57f8
	rk8:
	.quad 0x000000018bb70000

	rk9:
	.quad 0xceae000000000000
	rk10:
	.quad 0xbfd6000000000000
	rk11:
	.quad 0x1e16000000000000
	rk12:
	.quad 0x713c000000000000
	rk13:
	.quad 0xf7f9000000000000
	rk14:
	.quad 0x80a6000000000000
	rk15:
	.quad 0x044c000000000000
	rk16:
	.quad 0xe658000000000000
	rk17:
	.quad 0xad18000000000000
	rk18:
	.quad 0xa497000000000000
	rk19:
	.quad 0x6ee3000000000000
	rk20:
	.quad 0xe7b5000000000000



	mask1:
	.octa 0x80808080808080808080808080808080
	mask2:
	.octa 0x00000000FFFFFFFFFFFFFFFFFFFFFFFF

	SHUF_MASK:
	.octa 0x000102030405060708090A0B0C0D0E0F

	pshufb_shf_table:
	# use these values for shift constants for the pshufb instruction
	# different alignments result in values as shown:
	# DDQ 0x008f8e8d8c8b8a898887868584838281 # shl 15 (16-1) / shr1
	# DDQ 0x01008f8e8d8c8b8a8988878685848382 # shl 14 (16-3) / shr2
	# DDQ 0x0201008f8e8d8c8b8a89888786858483 # shl 13 (16-4) / shr3
	# DDQ 0x030201008f8e8d8c8b8a898887868584 # shl 12 (16-4) / shr4
	# DDQ 0x04030201008f8e8d8c8b8a8988878685 # shl 11 (16-5) / shr5
	# DDQ 0x0504030201008f8e8d8c8b8a89888786 # shl 10 (16-6) / shr6
	# DDQ 0x060504030201008f8e8d8c8b8a898887 # shl 9 (16-7) / shr7
	# DDQ 0x07060504030201008f8e8d8c8b8a8988 # shl 8 (16-8) / shr8
	# DDQ 0x0807060504030201008f8e8d8c8b8a89 # shl 7 (16-9) / shr9
	# DDQ 0x090807060504030201008f8e8d8c8b8a # shl 6 (16-10) / shr10
	# DDQ 0x0a090807060504030201008f8e8d8c8b # shl 5 (16-11) / shr11
	# DDQ 0x0b0a090807060504030201008f8e8d8c # shl 4 (16-12) / shr12
	# DDQ 0x0c0b0a090807060504030201008f8e8d # shl 3 (16-13) / shr13
	# DDQ 0x0d0c0b0a090807060504030201008f8e # shl 2 (16-14) / shr14
	# DDQ 0x0e0d0c0b0a090807060504030201008f # shl 1 (16-15) / shr15
	.octa 0x8f8e8d8c8b8a89888786858483828100
	.octa 0x000e0d0c0b0a09080706050403020100