| /* |
| * STK1160 driver |
| * |
| * Copyright (C) 2012 Ezequiel Garcia |
| * <elezegarcia--a.t--gmail.com> |
| * |
| * Based on Easycap driver by R.M. Thomas |
| * Copyright (C) 2010 R.M. Thomas |
| * <rmthomas--a.t--sciolus.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| /* GPIO Control */ |
| #define STK1160_GCTRL 0x000 |
| |
| /* Remote Wakup Control */ |
| #define STK1160_RMCTL 0x00c |
| |
| /* |
| * Decoder Control Register: |
| * This byte controls capture start/stop |
| * with bit #7 (0x?? OR 0x80 to activate). |
| */ |
| #define STK1160_DCTRL 0x100 |
| |
| /* |
| * Decimation Control Register: |
| * Byte 104: Horizontal Decimation Line Unit Count |
| * Byte 105: Vertical Decimation Line Unit Count |
| * Byte 106: Decimation Control |
| * Bit 0 - Horizontal Decimation Control |
| * 0 Horizontal decimation is disabled. |
| * 1 Horizontal decimation is enabled. |
| * Bit 1 - Decimates Half or More Column |
| * 0 Decimates less than half from original column, |
| * send count unit (0x105) before each unit skipped. |
| * 1 Decimates half or more from original column, |
| * skip count unit (0x105) before each unit sent. |
| * Bit 2 - Vertical Decimation Control |
| * 0 Vertical decimation is disabled. |
| * 1 Vertical decimation is enabled. |
| * Bit 3 - Vertical Greater or Equal to Half |
| * 0 Decimates less than half from original row, |
| * send count unit (0x105) before each unit skipped. |
| * 1 Decimates half or more from original row, |
| * skip count unit (0x105) before each unit sent. |
| * Bit 4 - Decimation Unit |
| * 0 Decimation will work with 2 rows or columns per unit. |
| * 1 Decimation will work with 4 rows or columns per unit. |
| */ |
| #define STK1160_DMCTRL_H_UNITS 0x104 |
| #define STK1160_DMCTRL_V_UNITS 0x105 |
| #define STK1160_DMCTRL 0x106 |
| #define STK1160_H_DEC_EN BIT(0) |
| #define STK1160_H_DEC_MODE BIT(1) |
| #define STK1160_V_DEC_EN BIT(2) |
| #define STK1160_V_DEC_MODE BIT(3) |
| #define STK1160_DEC_UNIT_SIZE BIT(4) |
| |
| /* Capture Frame Start Position */ |
| #define STK116_CFSPO 0x110 |
| #define STK116_CFSPO_STX_L 0x110 |
| #define STK116_CFSPO_STX_H 0x111 |
| #define STK116_CFSPO_STY_L 0x112 |
| #define STK116_CFSPO_STY_H 0x113 |
| |
| /* Capture Frame End Position */ |
| #define STK116_CFEPO 0x114 |
| #define STK116_CFEPO_ENX_L 0x114 |
| #define STK116_CFEPO_ENX_H 0x115 |
| #define STK116_CFEPO_ENY_L 0x116 |
| #define STK116_CFEPO_ENY_H 0x117 |
| |
| /* Serial Interface Control */ |
| #define STK1160_SICTL 0x200 |
| #define STK1160_SICTL_CD 0x202 |
| #define STK1160_SICTL_SDA 0x203 |
| |
| /* Serial Bus Write */ |
| #define STK1160_SBUSW 0x204 |
| #define STK1160_SBUSW_WA 0x204 |
| #define STK1160_SBUSW_WD 0x205 |
| |
| /* Serial Bus Read */ |
| #define STK1160_SBUSR 0x208 |
| #define STK1160_SBUSR_RA 0x208 |
| #define STK1160_SBUSR_RD 0x209 |
| |
| /* Alternate Serial Inteface Control */ |
| #define STK1160_ASIC 0x2fc |
| |
| /* PLL Select Options */ |
| #define STK1160_PLLSO 0x018 |
| |
| /* PLL Frequency Divider */ |
| #define STK1160_PLLFD 0x01c |
| |
| /* Timing Generator */ |
| #define STK1160_TIGEN 0x300 |
| |
| /* Timing Control Parameter */ |
| #define STK1160_TICTL 0x350 |
| |
| /* AC97 Audio Control */ |
| #define STK1160_AC97CTL_0 0x500 |
| #define STK1160_AC97CTL_1 0x504 |
| |
| /* Use [0:6] bits of register 0x504 to set codec command address */ |
| #define STK1160_AC97_ADDR 0x504 |
| /* Use [16:31] bits of register 0x500 to set codec command data */ |
| #define STK1160_AC97_CMD 0x502 |
| |
| /* Audio I2S Interface */ |
| #define STK1160_I2SCTL 0x50c |
| |
| /* EEPROM Interface */ |
| #define STK1160_EEPROM_SZ 0x5f0 |
