| /* |
| * Copyright 2010 Tilera Corporation. All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation, version 2. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for |
| * more details. |
| */ |
| |
| #include <linux/cache.h> |
| #include <linux/delay.h> |
| #include <linux/uaccess.h> |
| #include <linux/module.h> |
| #include <linux/mm.h> |
| #include <linux/atomic.h> |
| #include <arch/chip.h> |
| |
| /* This page is remapped on startup to be hash-for-home. */ |
| int atomic_locks[PAGE_SIZE / sizeof(int)] __page_aligned_bss; |
| |
| int *__atomic_hashed_lock(volatile void *v) |
| { |
| /* NOTE: this code must match "sys_cmpxchg" in kernel/intvec_32.S */ |
| /* |
| * Use bits [3, 3 + ATOMIC_HASH_SHIFT) as the lock index. |
| * Using mm works here because atomic_locks is page aligned. |
| */ |
| unsigned long ptr = __insn_mm((unsigned long)v >> 1, |
| (unsigned long)atomic_locks, |
| 2, (ATOMIC_HASH_SHIFT + 2) - 1); |
| return (int *)ptr; |
| } |
| |
| #ifdef CONFIG_SMP |
| /* Return whether the passed pointer is a valid atomic lock pointer. */ |
| static int is_atomic_lock(int *p) |
| { |
| return p >= &atomic_locks[0] && p < &atomic_locks[ATOMIC_HASH_SIZE]; |
| } |
| |
| void __atomic_fault_unlock(int *irqlock_word) |
| { |
| BUG_ON(!is_atomic_lock(irqlock_word)); |
| BUG_ON(*irqlock_word != 1); |
| *irqlock_word = 0; |
| } |
| |
| #endif /* CONFIG_SMP */ |
| |
| static inline int *__atomic_setup(volatile void *v) |
| { |
| /* Issue a load to the target to bring it into cache. */ |
| *(volatile int *)v; |
| return __atomic_hashed_lock(v); |
| } |
| |
| int _atomic_xchg(int *v, int n) |
| { |
| return __atomic_xchg(v, __atomic_setup(v), n).val; |
| } |
| EXPORT_SYMBOL(_atomic_xchg); |
| |
| int _atomic_xchg_add(int *v, int i) |
| { |
| return __atomic_xchg_add(v, __atomic_setup(v), i).val; |
| } |
| EXPORT_SYMBOL(_atomic_xchg_add); |
| |
| int _atomic_xchg_add_unless(int *v, int a, int u) |
| { |
| /* |
| * Note: argument order is switched here since it is easier |
| * to use the first argument consistently as the "old value" |
| * in the assembly, as is done for _atomic_cmpxchg(). |
| */ |
| return __atomic_xchg_add_unless(v, __atomic_setup(v), u, a).val; |
| } |
| EXPORT_SYMBOL(_atomic_xchg_add_unless); |
| |
| int _atomic_cmpxchg(int *v, int o, int n) |
| { |
| return __atomic_cmpxchg(v, __atomic_setup(v), o, n).val; |
| } |
| EXPORT_SYMBOL(_atomic_cmpxchg); |
| |
| unsigned long _atomic_or(volatile unsigned long *p, unsigned long mask) |
| { |
| return __atomic_or((int *)p, __atomic_setup(p), mask).val; |
| } |
| EXPORT_SYMBOL(_atomic_or); |
| |
| unsigned long _atomic_and(volatile unsigned long *p, unsigned long mask) |
| { |
| return __atomic_and((int *)p, __atomic_setup(p), mask).val; |
| } |
| EXPORT_SYMBOL(_atomic_and); |
| |
| unsigned long _atomic_andn(volatile unsigned long *p, unsigned long mask) |
| { |
| return __atomic_andn((int *)p, __atomic_setup(p), mask).val; |
| } |
| EXPORT_SYMBOL(_atomic_andn); |
| |
| unsigned long _atomic_xor(volatile unsigned long *p, unsigned long mask) |
| { |
| return __atomic_xor((int *)p, __atomic_setup(p), mask).val; |
| } |
| EXPORT_SYMBOL(_atomic_xor); |
| |
| |
| long long _atomic64_xchg(long long *v, long long n) |
| { |
| return __atomic64_xchg(v, __atomic_setup(v), n); |
| } |
| EXPORT_SYMBOL(_atomic64_xchg); |
| |
| long long _atomic64_xchg_add(long long *v, long long i) |
| { |
| return __atomic64_xchg_add(v, __atomic_setup(v), i); |
| } |
| EXPORT_SYMBOL(_atomic64_xchg_add); |
| |
| long long _atomic64_xchg_add_unless(long long *v, long long a, long long u) |
| { |
| /* |
| * Note: argument order is switched here since it is easier |
| * to use the first argument consistently as the "old value" |
| * in the assembly, as is done for _atomic_cmpxchg(). |
| */ |
| return __atomic64_xchg_add_unless(v, __atomic_setup(v), u, a); |
| } |
| EXPORT_SYMBOL(_atomic64_xchg_add_unless); |
| |
| long long _atomic64_cmpxchg(long long *v, long long o, long long n) |
| { |
| return __atomic64_cmpxchg(v, __atomic_setup(v), o, n); |
| } |
| EXPORT_SYMBOL(_atomic64_cmpxchg); |
| |
| long long _atomic64_and(long long *v, long long n) |
| { |
| return __atomic64_and(v, __atomic_setup(v), n); |
| } |
| EXPORT_SYMBOL(_atomic64_and); |
| |
| long long _atomic64_or(long long *v, long long n) |
| { |
| return __atomic64_or(v, __atomic_setup(v), n); |
| } |
| EXPORT_SYMBOL(_atomic64_or); |
| |
| long long _atomic64_xor(long long *v, long long n) |
| { |
| return __atomic64_xor(v, __atomic_setup(v), n); |
| } |
| EXPORT_SYMBOL(_atomic64_xor); |
| |
| /* |
| * If any of the atomic or futex routines hit a bad address (not in |
| * the page tables at kernel PL) this routine is called. The futex |
| * routines are never used on kernel space, and the normal atomics and |
| * bitops are never used on user space. So a fault on kernel space |
| * must be fatal, but a fault on userspace is a futex fault and we |
| * need to return -EFAULT. Note that the context this routine is |
| * invoked in is the context of the "_atomic_xxx()" routines called |
| * by the functions in this file. |
| */ |
| struct __get_user __atomic_bad_address(int __user *addr) |
| { |
| if (unlikely(!access_ok(VERIFY_WRITE, addr, sizeof(int)))) |
| panic("Bad address used for kernel atomic op: %p\n", addr); |
| return (struct __get_user) { .err = -EFAULT }; |
| } |
| |
| |
| void __init __init_atomic_per_cpu(void) |
| { |
| /* Validate power-of-two and "bigger than cpus" assumption */ |
| BUILD_BUG_ON(ATOMIC_HASH_SIZE & (ATOMIC_HASH_SIZE-1)); |
| BUG_ON(ATOMIC_HASH_SIZE < nr_cpu_ids); |
| |
| /* |
| * On TILEPro we prefer to use a single hash-for-home |
| * page, since this means atomic operations are less |
| * likely to encounter a TLB fault and thus should |
| * in general perform faster. You may wish to disable |
| * this in situations where few hash-for-home tiles |
| * are configured. |
| */ |
| BUG_ON((unsigned long)atomic_locks % PAGE_SIZE != 0); |
| |
| /* The locks must all fit on one page. */ |
| BUILD_BUG_ON(ATOMIC_HASH_SIZE * sizeof(int) > PAGE_SIZE); |
| |
| /* |
| * We use the page offset of the atomic value's address as |
| * an index into atomic_locks, excluding the low 3 bits. |
| * That should not produce more indices than ATOMIC_HASH_SIZE. |
| */ |
| BUILD_BUG_ON((PAGE_SIZE >> 3) > ATOMIC_HASH_SIZE); |
| } |