arch/parisc/Kconfig - kernel/quantenna - Git at Google

 config PARISC
 	def_bool y
 	select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_SYSCALL_TRACEPOINTS
 	select ARCH_WANT_FRAME_POINTERS
 	select RTC_CLASS
 	select RTC_DRV_GENERIC
 	select INIT_ALL_POSSIBLE
 	select BUG
 	select BUILDTIME_EXTABLE_SORT
 	select HAVE_PERF_EVENTS
 	select GENERIC_ATOMIC64 if !64BIT
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select BROKEN_RODATA
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PCI_IOMAP
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_STRNCPY_FROM_USER
 	select SYSCTL_ARCH_UNALIGN_ALLOW
 	select SYSCTL_EXCEPTION_TRACE
 	select HAVE_MOD_ARCH_SPECIFIC
 	select VIRT_TO_BUS
 	select MODULES_USE_ELF_RELA
 	select CLONE_BACKWARDS
 	select TTY # Needed for pdc_cons.c
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_UNSTABLE_SCHED_CLOCK if (SMP || !64BIT)
 	select ARCH_NO_COHERENT_DMA_MMAP
 	select CPU_NO_EFFICIENT_FFS

 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
 	  in many of their workstations & servers (HP9000 700 and 800 series,
 	  and later HP3000 series).  The PA-RISC Linux project home page is
 	  at <http://www.parisc-linux.org/>.

 config MMU
 	def_bool y

 config STACK_GROWSUP
 	def_bool y

 config GENERIC_LOCKBREAK
 	bool
 	default y
 	depends on SMP && PREEMPT

 config RWSEM_GENERIC_SPINLOCK
 	def_bool y

 config RWSEM_XCHGADD_ALGORITHM
 	bool

 config ARCH_HAS_ILOG2_U32
 	bool
 	default n

 config ARCH_HAS_ILOG2_U64
 	bool
 	default n

 config GENERIC_BUG
 	bool
 	default y
 	depends on BUG

 config GENERIC_HWEIGHT
 	bool
 	default y

 config GENERIC_CALIBRATE_DELAY
 	bool
 	default y

 config TIME_LOW_RES
 	bool
 	depends on SMP
 	default y

 # unless you want to implement ACPI on PA-RISC ... ;-)
 config PM
 	bool

 config STACKTRACE_SUPPORT
 	def_bool y

 config NEED_DMA_MAP_STATE
 	def_bool y

 config NEED_SG_DMA_LENGTH
 	def_bool y

 config ISA_DMA_API
 	bool

 config ARCH_MAY_HAVE_PC_FDC
 	bool
 	depends on BROKEN
 	default y

 config PGTABLE_LEVELS
 	int
 	default 3 if 64BIT && PARISC_PAGE_SIZE_4KB
 	default 2

 config SYS_SUPPORTS_HUGETLBFS
 	def_bool y if PA20

 source "init/Kconfig"

 source "kernel/Kconfig.freezer"


 menu "Processor type and features"

 choice
 	prompt "Processor type"
 	default PA7000

 config PA7000
 	bool "PA7000/PA7100"
 	---help---
 	  This is the processor type of your CPU.  This information is
 	  used for optimizing purposes.  In order to compile a kernel
 	  that can run on all 32-bit PA CPUs (albeit not optimally fast),
 	  you can specify "PA7000" here.

 	  Specifying "PA8000" here will allow you to select a 64-bit kernel
 	  which is required on some machines.

 config PA7100LC
 	bool "PA7100LC"
 	help
 	  Select this option for the PCX-L processor, as used in the
 	  712, 715/64, 715/80, 715/100, 715/100XC, 725/100, 743, 748,
 	  D200, D210, D300, D310 and E-class

 config PA7200
 	bool "PA7200"
 	help
 	  Select this option for the PCX-T' processor, as used in the
 	  C100, C110, J100, J110, J210XC, D250, D260, D350, D360,
 	  K100, K200, K210, K220, K400, K410 and K420

 config PA7300LC
 	bool "PA7300LC"
 	help
 	  Select this option for the PCX-L2 processor, as used in the
 	  744, A180, B132L, B160L, B180L, C132L, C160L, C180L,
 	  D220, D230, D320 and D330.

 config PA8X00
 	bool "PA8000 and up"
 	help
 	  Select this option for PCX-U to PCX-W2 processors.

 endchoice

 # Define implied options from the CPU selection here

 config PA20
 	def_bool y
 	depends on PA8X00

 config PA11
 	def_bool y
 	depends on PA7000 || PA7100LC || PA7200 || PA7300LC

 config PREFETCH
 	def_bool y
 	depends on PA8X00 || PA7200

 config MLONGCALLS
 	bool "Enable the -mlong-calls compiler option for big kernels"
 	def_bool y if (!MODULES)
 	depends on PA8X00
 	help
 	  If you configure the kernel to include many drivers built-in instead
 	  as modules, the kernel executable may become too big, so that the
 	  linker will not be able to resolve some long branches and fails to link
 	  your vmlinux kernel. In that case enabling this option will help you
 	  to overcome this limit by using the -mlong-calls compiler option.

 	  Usually you want to say N here, unless you e.g. want to build
 	  a kernel which includes all necessary drivers built-in and which can
 	  be used for TFTP booting without the need to have an initrd ramdisk.

 	  Enabling this option will probably slow down your kernel.

 config 64BIT
 	bool "64-bit kernel"
 	depends on PA8X00
 	help
 	  Enable this if you want to support 64bit kernel on PA-RISC platform.

 	  At the moment, only people willing to use more than 2GB of RAM,
 	  or having a 64bit-only capable PA-RISC machine should say Y here.

 	  Since there is no 64bit userland on PA-RISC, there is no point to
 	  enable this option otherwise. The 64bit kernel is significantly bigger
 	  and slower than the 32bit one.

 choice
 	prompt "Kernel page size"
 	default PARISC_PAGE_SIZE_4KB

 config PARISC_PAGE_SIZE_4KB
 	bool "4KB"
 	help
 	  This lets you select the page size of the kernel.  For best
 	  performance, a page size of 16KB is recommended.  For best
 	  compatibility with 32bit applications, a page size of 4KB should be
 	  selected (the vast majority of 32bit binaries work perfectly fine
 	  with a larger page size).

 	  4KB                For best 32bit compatibility
 	  16KB               For best performance
 	  64KB               For best performance, might give more overhead.

 	  If you don't know what to do, choose 4KB.

 config PARISC_PAGE_SIZE_16KB
 	bool "16KB"
 	depends on PA8X00

 config PARISC_PAGE_SIZE_64KB
 	bool "64KB"
 	depends on PA8X00

 endchoice

 config SMP
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more
 	  than one CPU, say Y.

 	  If you say N here, the kernel will run on uni- and multiprocessor
 	  machines, but will use only one CPU of a multiprocessor machine. If
 	  you say Y here, the kernel will run on many, but not all,
 	  uniprocessor machines. On a uniprocessor machine, the kernel
 	  will run faster if you say N here.

 	  See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
 	  available at <http://www.tldp.org/docs.html#howto>.

 	  If you don't know what to do here, say N.

 config IRQSTACKS
 	bool "Use separate kernel stacks when processing interrupts"
 	default y
 	help
 	  If you say Y here the kernel will use separate kernel stacks
 	  for handling hard and soft interrupts.  This can help avoid
 	  overflowing the process kernel stacks.

 config HOTPLUG_CPU
 	bool
 	default y if SMP

 config ARCH_SELECT_MEMORY_MODEL
 	def_bool y
 	depends on 64BIT

 config ARCH_DISCONTIGMEM_ENABLE
 	def_bool y
 	depends on 64BIT

 config ARCH_FLATMEM_ENABLE
 	def_bool y

 config ARCH_DISCONTIGMEM_DEFAULT
 	def_bool y
 	depends on ARCH_DISCONTIGMEM_ENABLE

 config NODES_SHIFT
 	int
 	default "3"
 	depends on NEED_MULTIPLE_NODES

 source "kernel/Kconfig.preempt"
 source "kernel/Kconfig.hz"
 source "mm/Kconfig"

 config COMPAT
 	def_bool y
 	depends on 64BIT

 config SYSVIPC_COMPAT
 	def_bool y
 	depends on COMPAT && SYSVIPC

 config AUDIT_ARCH
 	def_bool y

 config NR_CPUS
 	int "Maximum number of CPUs (2-32)"
 	range 2 32
 	depends on SMP
 	default "32"

 endmenu


 source "drivers/parisc/Kconfig"


 menu "Executable file formats"

 source "fs/Kconfig.binfmt"

 endmenu

 source "net/Kconfig"

 source "drivers/Kconfig"

 source "fs/Kconfig"

 source "arch/parisc/Kconfig.debug"

 config SECCOMP
 	def_bool y
 	prompt "Enable seccomp to safely compute untrusted bytecode"
 	---help---
 	  This kernel feature is useful for number crunching applications
 	  that may need to compute untrusted bytecode during their
 	  execution. By using pipes or other transports made available to
 	  the process as file descriptors supporting the read/write
 	  syscalls, it's possible to isolate those applications in
 	  their own address space using seccomp. Once seccomp is
 	  enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
 	  and the task is only allowed to execute a few safe syscalls
 	  defined by each seccomp mode.

 	  If unsure, say Y. Only embedded should say N here.

 source "security/Kconfig"

 source "crypto/Kconfig"

 source "lib/Kconfig"
	config PARISC
	def_bool y
	select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
	select ARCH_MIGHT_HAVE_PC_PARPORT
	select HAVE_IDE
	select HAVE_OPROFILE
	select HAVE_FUNCTION_TRACER
	select HAVE_FUNCTION_GRAPH_TRACER
	select HAVE_SYSCALL_TRACEPOINTS
	select ARCH_WANT_FRAME_POINTERS
	select RTC_CLASS
	select RTC_DRV_GENERIC
	select INIT_ALL_POSSIBLE
	select BUG
	select BUILDTIME_EXTABLE_SORT
	select HAVE_PERF_EVENTS
	select GENERIC_ATOMIC64 if !64BIT
	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
	select BROKEN_RODATA
	select GENERIC_IRQ_PROBE
	select GENERIC_PCI_IOMAP
	select ARCH_HAVE_NMI_SAFE_CMPXCHG
	select GENERIC_SMP_IDLE_THREAD
	select GENERIC_STRNCPY_FROM_USER
	select SYSCTL_ARCH_UNALIGN_ALLOW
	select SYSCTL_EXCEPTION_TRACE
	select HAVE_MOD_ARCH_SPECIFIC
	select VIRT_TO_BUS
	select MODULES_USE_ELF_RELA
	select CLONE_BACKWARDS
	select TTY # Needed for pdc_cons.c
	select HAVE_DEBUG_STACKOVERFLOW
	select HAVE_ARCH_AUDITSYSCALL
	select HAVE_ARCH_SECCOMP_FILTER
	select HAVE_ARCH_TRACEHOOK
	select HAVE_UNSTABLE_SCHED_CLOCK if (SMP \|\| !64BIT)
	select ARCH_NO_COHERENT_DMA_MMAP
	select CPU_NO_EFFICIENT_FFS

	help
	The PA-RISC microprocessor is designed by Hewlett-Packard and used
	in many of their workstations & servers (HP9000 700 and 800 series,
	and later HP3000 series). The PA-RISC Linux project home page is
	at <http://www.parisc-linux.org/>.

	config MMU
	def_bool y

	config STACK_GROWSUP
	def_bool y

	config GENERIC_LOCKBREAK
	bool
	default y
	depends on SMP && PREEMPT

	config RWSEM_GENERIC_SPINLOCK
	def_bool y

	config RWSEM_XCHGADD_ALGORITHM
	bool

	config ARCH_HAS_ILOG2_U32
	bool
	default n

	config ARCH_HAS_ILOG2_U64
	bool
	default n

	config GENERIC_BUG
	bool
	default y
	depends on BUG

	config GENERIC_HWEIGHT
	bool
	default y

	config GENERIC_CALIBRATE_DELAY
	bool
	default y

	config TIME_LOW_RES
	bool
	depends on SMP
	default y

	# unless you want to implement ACPI on PA-RISC ... ;-)
	config PM
	bool

	config STACKTRACE_SUPPORT
	def_bool y

	config NEED_DMA_MAP_STATE
	def_bool y

	config NEED_SG_DMA_LENGTH
	def_bool y

	config ISA_DMA_API
	bool

	config ARCH_MAY_HAVE_PC_FDC
	bool
	depends on BROKEN
	default y

	config PGTABLE_LEVELS
	int
	default 3 if 64BIT && PARISC_PAGE_SIZE_4KB
	default 2

	config SYS_SUPPORTS_HUGETLBFS
	def_bool y if PA20

	source "init/Kconfig"

	source "kernel/Kconfig.freezer"


	menu "Processor type and features"

	choice
	prompt "Processor type"
	default PA7000

	config PA7000
	bool "PA7000/PA7100"
	---help---
	This is the processor type of your CPU. This information is
	used for optimizing purposes. In order to compile a kernel
	that can run on all 32-bit PA CPUs (albeit not optimally fast),
	you can specify "PA7000" here.

	Specifying "PA8000" here will allow you to select a 64-bit kernel
	which is required on some machines.

	config PA7100LC
	bool "PA7100LC"
	help
	Select this option for the PCX-L processor, as used in the
	712, 715/64, 715/80, 715/100, 715/100XC, 725/100, 743, 748,
	D200, D210, D300, D310 and E-class

	config PA7200
	bool "PA7200"
	help
	Select this option for the PCX-T' processor, as used in the
	C100, C110, J100, J110, J210XC, D250, D260, D350, D360,
	K100, K200, K210, K220, K400, K410 and K420

	config PA7300LC
	bool "PA7300LC"
	help
	Select this option for the PCX-L2 processor, as used in the
	744, A180, B132L, B160L, B180L, C132L, C160L, C180L,
	D220, D230, D320 and D330.

	config PA8X00
	bool "PA8000 and up"
	help
	Select this option for PCX-U to PCX-W2 processors.

	endchoice

	# Define implied options from the CPU selection here

	config PA20
	def_bool y
	depends on PA8X00

	config PA11
	def_bool y
	depends on PA7000 \|\| PA7100LC \|\| PA7200 \|\| PA7300LC

	config PREFETCH
	def_bool y
	depends on PA8X00 \|\| PA7200

	config MLONGCALLS
	bool "Enable the -mlong-calls compiler option for big kernels"
	def_bool y if (!MODULES)
	depends on PA8X00
	help
	If you configure the kernel to include many drivers built-in instead
	as modules, the kernel executable may become too big, so that the
	linker will not be able to resolve some long branches and fails to link
	your vmlinux kernel. In that case enabling this option will help you
	to overcome this limit by using the -mlong-calls compiler option.

	Usually you want to say N here, unless you e.g. want to build
	a kernel which includes all necessary drivers built-in and which can
	be used for TFTP booting without the need to have an initrd ramdisk.

	Enabling this option will probably slow down your kernel.

	config 64BIT
	bool "64-bit kernel"
	depends on PA8X00
	help
	Enable this if you want to support 64bit kernel on PA-RISC platform.

	At the moment, only people willing to use more than 2GB of RAM,
	or having a 64bit-only capable PA-RISC machine should say Y here.

	Since there is no 64bit userland on PA-RISC, there is no point to
	enable this option otherwise. The 64bit kernel is significantly bigger
	and slower than the 32bit one.

	choice
	prompt "Kernel page size"
	default PARISC_PAGE_SIZE_4KB

	config PARISC_PAGE_SIZE_4KB
	bool "4KB"
	help
	This lets you select the page size of the kernel. For best
	performance, a page size of 16KB is recommended. For best
	compatibility with 32bit applications, a page size of 4KB should be
	selected (the vast majority of 32bit binaries work perfectly fine
	with a larger page size).

	4KB For best 32bit compatibility
	16KB For best performance
	64KB For best performance, might give more overhead.

	If you don't know what to do, choose 4KB.

	config PARISC_PAGE_SIZE_16KB
	bool "16KB"
	depends on PA8X00

	config PARISC_PAGE_SIZE_64KB
	bool "64KB"
	depends on PA8X00

	endchoice

	config SMP
	bool "Symmetric multi-processing support"
	---help---
	This enables support for systems with more than one CPU. If you have
	a system with only one CPU, say N. If you have a system with more
	than one CPU, say Y.

	If you say N here, the kernel will run on uni- and multiprocessor
	machines, but will use only one CPU of a multiprocessor machine. If
	you say Y here, the kernel will run on many, but not all,
	uniprocessor machines. On a uniprocessor machine, the kernel
	will run faster if you say N here.

	See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
	available at <http://www.tldp.org/docs.html#howto>.

	If you don't know what to do here, say N.

	config IRQSTACKS
	bool "Use separate kernel stacks when processing interrupts"
	default y
	help
	If you say Y here the kernel will use separate kernel stacks
	for handling hard and soft interrupts. This can help avoid
	overflowing the process kernel stacks.

	config HOTPLUG_CPU
	bool
	default y if SMP

	config ARCH_SELECT_MEMORY_MODEL
	def_bool y
	depends on 64BIT

	config ARCH_DISCONTIGMEM_ENABLE
	def_bool y
	depends on 64BIT

	config ARCH_FLATMEM_ENABLE
	def_bool y

	config ARCH_DISCONTIGMEM_DEFAULT
	def_bool y
	depends on ARCH_DISCONTIGMEM_ENABLE

	config NODES_SHIFT
	int
	default "3"
	depends on NEED_MULTIPLE_NODES

	source "kernel/Kconfig.preempt"
	source "kernel/Kconfig.hz"
	source "mm/Kconfig"

	config COMPAT
	def_bool y
	depends on 64BIT

	config SYSVIPC_COMPAT
	def_bool y
	depends on COMPAT && SYSVIPC

	config AUDIT_ARCH
	def_bool y

	config NR_CPUS
	int "Maximum number of CPUs (2-32)"
	range 2 32
	depends on SMP
	default "32"

	endmenu


	source "drivers/parisc/Kconfig"


	menu "Executable file formats"

	source "fs/Kconfig.binfmt"

	endmenu

	source "net/Kconfig"

	source "drivers/Kconfig"

	source "fs/Kconfig"

	source "arch/parisc/Kconfig.debug"

	config SECCOMP
	def_bool y
	prompt "Enable seccomp to safely compute untrusted bytecode"
	---help---
	This kernel feature is useful for number crunching applications
	that may need to compute untrusted bytecode during their
	execution. By using pipes or other transports made available to
	the process as file descriptors supporting the read/write
	syscalls, it's possible to isolate those applications in
	their own address space using seccomp. Once seccomp is
	enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
	and the task is only allowed to execute a few safe syscalls
	defined by each seccomp mode.

	If unsure, say Y. Only embedded should say N here.

	source "security/Kconfig"

	source "crypto/Kconfig"

	source "lib/Kconfig"