| /* |
| * GPIO-based I2C Arbitration Using a Challenge & Response Mechanism |
| * |
| * Copyright (C) 2012 Google, Inc |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/kernel.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c-mux.h> |
| #include <linux/module.h> |
| #include <linux/of_gpio.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| |
| /** |
| * struct i2c_arbitrator_data - Driver data for I2C arbitrator |
| * |
| * @our_gpio: GPIO we'll use to claim. |
| * @our_gpio_release: 0 if active high; 1 if active low; AKA if the GPIO == |
| * this then consider it released. |
| * @their_gpio: GPIO that the other side will use to claim. |
| * @their_gpio_release: 0 if active high; 1 if active low; AKA if the GPIO == |
| * this then consider it released. |
| * @slew_delay_us: microseconds to wait for a GPIO to go high. |
| * @wait_retry_us: we'll attempt another claim after this many microseconds. |
| * @wait_free_us: we'll give up after this many microseconds. |
| */ |
| |
| struct i2c_arbitrator_data { |
| int our_gpio; |
| int our_gpio_release; |
| int their_gpio; |
| int their_gpio_release; |
| unsigned int slew_delay_us; |
| unsigned int wait_retry_us; |
| unsigned int wait_free_us; |
| }; |
| |
| |
| /** |
| * i2c_arbitrator_select - claim the I2C bus |
| * |
| * Use the GPIO-based signalling protocol; return -EBUSY if we fail. |
| */ |
| static int i2c_arbitrator_select(struct i2c_mux_core *muxc, u32 chan) |
| { |
| const struct i2c_arbitrator_data *arb = i2c_mux_priv(muxc); |
| unsigned long stop_retry, stop_time; |
| |
| /* Start a round of trying to claim the bus */ |
| stop_time = jiffies + usecs_to_jiffies(arb->wait_free_us) + 1; |
| do { |
| /* Indicate that we want to claim the bus */ |
| gpio_set_value(arb->our_gpio, !arb->our_gpio_release); |
| udelay(arb->slew_delay_us); |
| |
| /* Wait for the other master to release it */ |
| stop_retry = jiffies + usecs_to_jiffies(arb->wait_retry_us) + 1; |
| while (time_before(jiffies, stop_retry)) { |
| int gpio_val = !!gpio_get_value(arb->their_gpio); |
| |
| if (gpio_val == arb->their_gpio_release) { |
| /* We got it, so return */ |
| return 0; |
| } |
| |
| usleep_range(50, 200); |
| } |
| |
| /* It didn't release, so give up, wait, and try again */ |
| gpio_set_value(arb->our_gpio, arb->our_gpio_release); |
| |
| usleep_range(arb->wait_retry_us, arb->wait_retry_us * 2); |
| } while (time_before(jiffies, stop_time)); |
| |
| /* Give up, release our claim */ |
| gpio_set_value(arb->our_gpio, arb->our_gpio_release); |
| udelay(arb->slew_delay_us); |
| dev_err(muxc->dev, "Could not claim bus, timeout\n"); |
| return -EBUSY; |
| } |
| |
| /** |
| * i2c_arbitrator_deselect - release the I2C bus |
| * |
| * Release the I2C bus using the GPIO-based signalling protocol. |
| */ |
| static int i2c_arbitrator_deselect(struct i2c_mux_core *muxc, u32 chan) |
| { |
| const struct i2c_arbitrator_data *arb = i2c_mux_priv(muxc); |
| |
| /* Release the bus and wait for the other master to notice */ |
| gpio_set_value(arb->our_gpio, arb->our_gpio_release); |
| udelay(arb->slew_delay_us); |
| |
| return 0; |
| } |
| |
| static int i2c_arbitrator_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| struct device_node *parent_np; |
| struct i2c_mux_core *muxc; |
| struct i2c_arbitrator_data *arb; |
| enum of_gpio_flags gpio_flags; |
| unsigned long out_init; |
| int ret; |
| |
| /* We only support probing from device tree; no platform_data */ |
| if (!np) { |
| dev_err(dev, "Cannot find device tree node\n"); |
| return -ENODEV; |
| } |
| if (dev_get_platdata(dev)) { |
| dev_err(dev, "Platform data is not supported\n"); |
| return -EINVAL; |
| } |
| |
| muxc = i2c_mux_alloc(NULL, dev, 1, sizeof(*arb), 0, |
| i2c_arbitrator_select, i2c_arbitrator_deselect); |
| if (!muxc) |
| return -ENOMEM; |
| arb = i2c_mux_priv(muxc); |
| |
| platform_set_drvdata(pdev, muxc); |
| |
| /* Request GPIOs */ |
| ret = of_get_named_gpio_flags(np, "our-claim-gpio", 0, &gpio_flags); |
| if (!gpio_is_valid(ret)) { |
| if (ret != -EPROBE_DEFER) |
| dev_err(dev, "Error getting our-claim-gpio\n"); |
| return ret; |
| } |
| arb->our_gpio = ret; |
| arb->our_gpio_release = !!(gpio_flags & OF_GPIO_ACTIVE_LOW); |
| out_init = (gpio_flags & OF_GPIO_ACTIVE_LOW) ? |
| GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; |
| ret = devm_gpio_request_one(dev, arb->our_gpio, out_init, |
| "our-claim-gpio"); |
| if (ret) { |
| if (ret != -EPROBE_DEFER) |
| dev_err(dev, "Error requesting our-claim-gpio\n"); |
| return ret; |
| } |
| |
| ret = of_get_named_gpio_flags(np, "their-claim-gpios", 0, &gpio_flags); |
| if (!gpio_is_valid(ret)) { |
| if (ret != -EPROBE_DEFER) |
| dev_err(dev, "Error getting their-claim-gpio\n"); |
| return ret; |
| } |
| arb->their_gpio = ret; |
| arb->their_gpio_release = !!(gpio_flags & OF_GPIO_ACTIVE_LOW); |
| ret = devm_gpio_request_one(dev, arb->their_gpio, GPIOF_IN, |
| "their-claim-gpio"); |
| if (ret) { |
| if (ret != -EPROBE_DEFER) |
| dev_err(dev, "Error requesting their-claim-gpio\n"); |
| return ret; |
| } |
| |
| /* At the moment we only support a single two master (us + 1 other) */ |
| if (gpio_is_valid(of_get_named_gpio(np, "their-claim-gpios", 1))) { |
| dev_err(dev, "Only one other master is supported\n"); |
| return -EINVAL; |
| } |
| |
| /* Arbitration parameters */ |
| if (of_property_read_u32(np, "slew-delay-us", &arb->slew_delay_us)) |
| arb->slew_delay_us = 10; |
| if (of_property_read_u32(np, "wait-retry-us", &arb->wait_retry_us)) |
| arb->wait_retry_us = 3000; |
| if (of_property_read_u32(np, "wait-free-us", &arb->wait_free_us)) |
| arb->wait_free_us = 50000; |
| |
| /* Find our parent */ |
| parent_np = of_parse_phandle(np, "i2c-parent", 0); |
| if (!parent_np) { |
| dev_err(dev, "Cannot parse i2c-parent\n"); |
| return -EINVAL; |
| } |
| muxc->parent = of_get_i2c_adapter_by_node(parent_np); |
| of_node_put(parent_np); |
| if (!muxc->parent) { |
| dev_err(dev, "Cannot find parent bus\n"); |
| return -EPROBE_DEFER; |
| } |
| |
| /* Actually add the mux adapter */ |
| ret = i2c_mux_add_adapter(muxc, 0, 0, 0); |
| if (ret) { |
| dev_err(dev, "Failed to add adapter\n"); |
| i2c_put_adapter(muxc->parent); |
| } |
| |
| return ret; |
| } |
| |
| static int i2c_arbitrator_remove(struct platform_device *pdev) |
| { |
| struct i2c_mux_core *muxc = platform_get_drvdata(pdev); |
| |
| i2c_mux_del_adapters(muxc); |
| i2c_put_adapter(muxc->parent); |
| return 0; |
| } |
| |
| static const struct of_device_id i2c_arbitrator_of_match[] = { |
| { .compatible = "i2c-arb-gpio-challenge", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, i2c_arbitrator_of_match); |
| |
| static struct platform_driver i2c_arbitrator_driver = { |
| .probe = i2c_arbitrator_probe, |
| .remove = i2c_arbitrator_remove, |
| .driver = { |
| .name = "i2c-arb-gpio-challenge", |
| .of_match_table = i2c_arbitrator_of_match, |
| }, |
| }; |
| |
| module_platform_driver(i2c_arbitrator_driver); |
| |
| MODULE_DESCRIPTION("GPIO-based I2C Arbitration"); |
| MODULE_AUTHOR("Doug Anderson <dianders@chromium.org>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:i2c-arb-gpio-challenge"); |