| /* |
| Auvitek AU8522 QAM/8VSB demodulator driver |
| |
| Copyright (C) 2008 Steven Toth <stoth@linuxtv.org> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/delay.h> |
| #include "dvb_frontend.h" |
| #include "au8522.h" |
| #include "au8522_priv.h" |
| |
| static int debug; |
| static int zv_mode = 1; /* default to on */ |
| |
| #define dprintk(arg...)\ |
| do { if (debug)\ |
| printk(arg);\ |
| } while (0) |
| |
| struct mse2snr_tab { |
| u16 val; |
| u16 data; |
| }; |
| |
| /* VSB SNR lookup table */ |
| static struct mse2snr_tab vsb_mse2snr_tab[] = { |
| { 0, 270 }, |
| { 2, 250 }, |
| { 3, 240 }, |
| { 5, 230 }, |
| { 7, 220 }, |
| { 9, 210 }, |
| { 12, 200 }, |
| { 13, 195 }, |
| { 15, 190 }, |
| { 17, 185 }, |
| { 19, 180 }, |
| { 21, 175 }, |
| { 24, 170 }, |
| { 27, 165 }, |
| { 31, 160 }, |
| { 32, 158 }, |
| { 33, 156 }, |
| { 36, 152 }, |
| { 37, 150 }, |
| { 39, 148 }, |
| { 40, 146 }, |
| { 41, 144 }, |
| { 43, 142 }, |
| { 44, 140 }, |
| { 48, 135 }, |
| { 50, 130 }, |
| { 43, 142 }, |
| { 53, 125 }, |
| { 56, 120 }, |
| { 256, 115 }, |
| }; |
| |
| /* QAM64 SNR lookup table */ |
| static struct mse2snr_tab qam64_mse2snr_tab[] = { |
| { 15, 0 }, |
| { 16, 290 }, |
| { 17, 288 }, |
| { 18, 286 }, |
| { 19, 284 }, |
| { 20, 282 }, |
| { 21, 281 }, |
| { 22, 279 }, |
| { 23, 277 }, |
| { 24, 275 }, |
| { 25, 273 }, |
| { 26, 271 }, |
| { 27, 269 }, |
| { 28, 268 }, |
| { 29, 266 }, |
| { 30, 264 }, |
| { 31, 262 }, |
| { 32, 260 }, |
| { 33, 259 }, |
| { 34, 258 }, |
| { 35, 256 }, |
| { 36, 255 }, |
| { 37, 254 }, |
| { 38, 252 }, |
| { 39, 251 }, |
| { 40, 250 }, |
| { 41, 249 }, |
| { 42, 248 }, |
| { 43, 246 }, |
| { 44, 245 }, |
| { 45, 244 }, |
| { 46, 242 }, |
| { 47, 241 }, |
| { 48, 240 }, |
| { 50, 239 }, |
| { 51, 238 }, |
| { 53, 237 }, |
| { 54, 236 }, |
| { 56, 235 }, |
| { 57, 234 }, |
| { 59, 233 }, |
| { 60, 232 }, |
| { 62, 231 }, |
| { 63, 230 }, |
| { 65, 229 }, |
| { 67, 228 }, |
| { 68, 227 }, |
| { 70, 226 }, |
| { 71, 225 }, |
| { 73, 224 }, |
| { 74, 223 }, |
| { 76, 222 }, |
| { 78, 221 }, |
| { 80, 220 }, |
| { 82, 219 }, |
| { 85, 218 }, |
| { 88, 217 }, |
| { 90, 216 }, |
| { 92, 215 }, |
| { 93, 214 }, |
| { 94, 212 }, |
| { 95, 211 }, |
| { 97, 210 }, |
| { 99, 209 }, |
| { 101, 208 }, |
| { 102, 207 }, |
| { 104, 206 }, |
| { 107, 205 }, |
| { 111, 204 }, |
| { 114, 203 }, |
| { 118, 202 }, |
| { 122, 201 }, |
| { 125, 200 }, |
| { 128, 199 }, |
| { 130, 198 }, |
| { 132, 197 }, |
| { 256, 190 }, |
| }; |
| |
| /* QAM256 SNR lookup table */ |
| static struct mse2snr_tab qam256_mse2snr_tab[] = { |
| { 15, 0 }, |
| { 16, 400 }, |
| { 17, 398 }, |
| { 18, 396 }, |
| { 19, 394 }, |
| { 20, 392 }, |
| { 21, 390 }, |
| { 22, 388 }, |
| { 23, 386 }, |
| { 24, 384 }, |
| { 25, 382 }, |
| { 26, 380 }, |
| { 27, 379 }, |
| { 28, 378 }, |
| { 29, 377 }, |
| { 30, 376 }, |
| { 31, 375 }, |
| { 32, 374 }, |
| { 33, 373 }, |
| { 34, 372 }, |
| { 35, 371 }, |
| { 36, 370 }, |
| { 37, 362 }, |
| { 38, 354 }, |
| { 39, 346 }, |
| { 40, 338 }, |
| { 41, 330 }, |
| { 42, 328 }, |
| { 43, 326 }, |
| { 44, 324 }, |
| { 45, 322 }, |
| { 46, 320 }, |
| { 47, 319 }, |
| { 48, 318 }, |
| { 49, 317 }, |
| { 50, 316 }, |
| { 51, 315 }, |
| { 52, 314 }, |
| { 53, 313 }, |
| { 54, 312 }, |
| { 55, 311 }, |
| { 56, 310 }, |
| { 57, 308 }, |
| { 58, 306 }, |
| { 59, 304 }, |
| { 60, 302 }, |
| { 61, 300 }, |
| { 62, 298 }, |
| { 65, 295 }, |
| { 68, 294 }, |
| { 70, 293 }, |
| { 73, 292 }, |
| { 76, 291 }, |
| { 78, 290 }, |
| { 79, 289 }, |
| { 81, 288 }, |
| { 82, 287 }, |
| { 83, 286 }, |
| { 84, 285 }, |
| { 85, 284 }, |
| { 86, 283 }, |
| { 88, 282 }, |
| { 89, 281 }, |
| { 256, 280 }, |
| }; |
| |
| static int au8522_mse2snr_lookup(struct mse2snr_tab *tab, int sz, int mse, |
| u16 *snr) |
| { |
| int i, ret = -EINVAL; |
| dprintk("%s()\n", __func__); |
| |
| for (i = 0; i < sz; i++) { |
| if (mse < tab[i].val) { |
| *snr = tab[i].data; |
| ret = 0; |
| break; |
| } |
| } |
| dprintk("%s() snr=%d\n", __func__, *snr); |
| return ret; |
| } |
| |
| static int au8522_set_if(struct dvb_frontend *fe, enum au8522_if_freq if_freq) |
| { |
| struct au8522_state *state = fe->demodulator_priv; |
| u8 r0b5, r0b6, r0b7; |
| char *ifmhz; |
| |
| switch (if_freq) { |
| case AU8522_IF_3_25MHZ: |
| ifmhz = "3.25"; |
| r0b5 = 0x00; |
| r0b6 = 0x3d; |
| r0b7 = 0xa0; |
| break; |
| case AU8522_IF_4MHZ: |
| ifmhz = "4.00"; |
| r0b5 = 0x00; |
| r0b6 = 0x4b; |
| r0b7 = 0xd9; |
| break; |
| case AU8522_IF_6MHZ: |
| ifmhz = "6.00"; |
| r0b5 = 0xfb; |
| r0b6 = 0x8e; |
| r0b7 = 0x39; |
| break; |
| default: |
| dprintk("%s() IF Frequency not supported\n", __func__); |
| return -EINVAL; |
| } |
| dprintk("%s() %s MHz\n", __func__, ifmhz); |
| au8522_writereg(state, 0x80b5, r0b5); |
| au8522_writereg(state, 0x80b6, r0b6); |
| au8522_writereg(state, 0x80b7, r0b7); |
| |
| return 0; |
| } |
| |
| /* VSB Modulation table */ |
| static struct { |
| u16 reg; |
| u16 data; |
| } VSB_mod_tab[] = { |
| { 0x8090, 0x84 }, |
| { 0x4092, 0x11 }, |
| { 0x2005, 0x00 }, |
| { 0x8091, 0x80 }, |
| { 0x80a3, 0x0c }, |
| { 0x80a4, 0xe8 }, |
| { 0x8081, 0xc4 }, |
| { 0x80a5, 0x40 }, |
| { 0x80a7, 0x40 }, |
| { 0x80a6, 0x67 }, |
| { 0x8262, 0x20 }, |
| { 0x821c, 0x30 }, |
| { 0x80d8, 0x1a }, |
| { 0x8227, 0xa0 }, |
| { 0x8121, 0xff }, |
| { 0x80a8, 0xf0 }, |
| { 0x80a9, 0x05 }, |
| { 0x80aa, 0x77 }, |
| { 0x80ab, 0xf0 }, |
| { 0x80ac, 0x05 }, |
| { 0x80ad, 0x77 }, |
| { 0x80ae, 0x41 }, |
| { 0x80af, 0x66 }, |
| { 0x821b, 0xcc }, |
| { 0x821d, 0x80 }, |
| { 0x80a4, 0xe8 }, |
| { 0x8231, 0x13 }, |
| }; |
| |
| /* QAM64 Modulation table */ |
| static struct { |
| u16 reg; |
| u16 data; |
| } QAM64_mod_tab[] = { |
| { 0x00a3, 0x09 }, |
| { 0x00a4, 0x00 }, |
| { 0x0081, 0xc4 }, |
| { 0x00a5, 0x40 }, |
| { 0x00aa, 0x77 }, |
| { 0x00ad, 0x77 }, |
| { 0x00a6, 0x67 }, |
| { 0x0262, 0x20 }, |
| { 0x021c, 0x30 }, |
| { 0x00b8, 0x3e }, |
| { 0x00b9, 0xf0 }, |
| { 0x00ba, 0x01 }, |
| { 0x00bb, 0x18 }, |
| { 0x00bc, 0x50 }, |
| { 0x00bd, 0x00 }, |
| { 0x00be, 0xea }, |
| { 0x00bf, 0xef }, |
| { 0x00c0, 0xfc }, |
| { 0x00c1, 0xbd }, |
| { 0x00c2, 0x1f }, |
| { 0x00c3, 0xfc }, |
| { 0x00c4, 0xdd }, |
| { 0x00c5, 0xaf }, |
| { 0x00c6, 0x00 }, |
| { 0x00c7, 0x38 }, |
| { 0x00c8, 0x30 }, |
| { 0x00c9, 0x05 }, |
| { 0x00ca, 0x4a }, |
| { 0x00cb, 0xd0 }, |
| { 0x00cc, 0x01 }, |
| { 0x00cd, 0xd9 }, |
| { 0x00ce, 0x6f }, |
| { 0x00cf, 0xf9 }, |
| { 0x00d0, 0x70 }, |
| { 0x00d1, 0xdf }, |
| { 0x00d2, 0xf7 }, |
| { 0x00d3, 0xc2 }, |
| { 0x00d4, 0xdf }, |
| { 0x00d5, 0x02 }, |
| { 0x00d6, 0x9a }, |
| { 0x00d7, 0xd0 }, |
| { 0x0250, 0x0d }, |
| { 0x0251, 0xcd }, |
| { 0x0252, 0xe0 }, |
| { 0x0253, 0x05 }, |
| { 0x0254, 0xa7 }, |
| { 0x0255, 0xff }, |
| { 0x0256, 0xed }, |
| { 0x0257, 0x5b }, |
| { 0x0258, 0xae }, |
| { 0x0259, 0xe6 }, |
| { 0x025a, 0x3d }, |
| { 0x025b, 0x0f }, |
| { 0x025c, 0x0d }, |
| { 0x025d, 0xea }, |
| { 0x025e, 0xf2 }, |
| { 0x025f, 0x51 }, |
| { 0x0260, 0xf5 }, |
| { 0x0261, 0x06 }, |
| { 0x021a, 0x00 }, |
| { 0x0546, 0x40 }, |
| { 0x0210, 0xc7 }, |
| { 0x0211, 0xaa }, |
| { 0x0212, 0xab }, |
| { 0x0213, 0x02 }, |
| { 0x0502, 0x00 }, |
| { 0x0121, 0x04 }, |
| { 0x0122, 0x04 }, |
| { 0x052e, 0x10 }, |
| { 0x00a4, 0xca }, |
| { 0x00a7, 0x40 }, |
| { 0x0526, 0x01 }, |
| }; |
| |
| /* QAM256 Modulation table */ |
| static struct { |
| u16 reg; |
| u16 data; |
| } QAM256_mod_tab[] = { |
| { 0x80a3, 0x09 }, |
| { 0x80a4, 0x00 }, |
| { 0x8081, 0xc4 }, |
| { 0x80a5, 0x40 }, |
| { 0x80aa, 0x77 }, |
| { 0x80ad, 0x77 }, |
| { 0x80a6, 0x67 }, |
| { 0x8262, 0x20 }, |
| { 0x821c, 0x30 }, |
| { 0x80b8, 0x3e }, |
| { 0x80b9, 0xf0 }, |
| { 0x80ba, 0x01 }, |
| { 0x80bb, 0x18 }, |
| { 0x80bc, 0x50 }, |
| { 0x80bd, 0x00 }, |
| { 0x80be, 0xea }, |
| { 0x80bf, 0xef }, |
| { 0x80c0, 0xfc }, |
| { 0x80c1, 0xbd }, |
| { 0x80c2, 0x1f }, |
| { 0x80c3, 0xfc }, |
| { 0x80c4, 0xdd }, |
| { 0x80c5, 0xaf }, |
| { 0x80c6, 0x00 }, |
| { 0x80c7, 0x38 }, |
| { 0x80c8, 0x30 }, |
| { 0x80c9, 0x05 }, |
| { 0x80ca, 0x4a }, |
| { 0x80cb, 0xd0 }, |
| { 0x80cc, 0x01 }, |
| { 0x80cd, 0xd9 }, |
| { 0x80ce, 0x6f }, |
| { 0x80cf, 0xf9 }, |
| { 0x80d0, 0x70 }, |
| { 0x80d1, 0xdf }, |
| { 0x80d2, 0xf7 }, |
| { 0x80d3, 0xc2 }, |
| { 0x80d4, 0xdf }, |
| { 0x80d5, 0x02 }, |
| { 0x80d6, 0x9a }, |
| { 0x80d7, 0xd0 }, |
| { 0x8250, 0x0d }, |
| { 0x8251, 0xcd }, |
| { 0x8252, 0xe0 }, |
| { 0x8253, 0x05 }, |
| { 0x8254, 0xa7 }, |
| { 0x8255, 0xff }, |
| { 0x8256, 0xed }, |
| { 0x8257, 0x5b }, |
| { 0x8258, 0xae }, |
| { 0x8259, 0xe6 }, |
| { 0x825a, 0x3d }, |
| { 0x825b, 0x0f }, |
| { 0x825c, 0x0d }, |
| { 0x825d, 0xea }, |
| { 0x825e, 0xf2 }, |
| { 0x825f, 0x51 }, |
| { 0x8260, 0xf5 }, |
| { 0x8261, 0x06 }, |
| { 0x821a, 0x00 }, |
| { 0x8546, 0x40 }, |
| { 0x8210, 0x26 }, |
| { 0x8211, 0xf6 }, |
| { 0x8212, 0x84 }, |
| { 0x8213, 0x02 }, |
| { 0x8502, 0x01 }, |
| { 0x8121, 0x04 }, |
| { 0x8122, 0x04 }, |
| { 0x852e, 0x10 }, |
| { 0x80a4, 0xca }, |
| { 0x80a7, 0x40 }, |
| { 0x8526, 0x01 }, |
| }; |
| |
| static struct { |
| u16 reg; |
| u16 data; |
| } QAM256_mod_tab_zv_mode[] = { |
| { 0x80a3, 0x09 }, |
| { 0x80a4, 0x00 }, |
| { 0x8081, 0xc4 }, |
| { 0x80a5, 0x40 }, |
| { 0x80b5, 0xfb }, |
| { 0x80b6, 0x8e }, |
| { 0x80b7, 0x39 }, |
| { 0x80aa, 0x77 }, |
| { 0x80ad, 0x77 }, |
| { 0x80a6, 0x67 }, |
| { 0x8262, 0x20 }, |
| { 0x821c, 0x30 }, |
| { 0x80b8, 0x3e }, |
| { 0x80b9, 0xf0 }, |
| { 0x80ba, 0x01 }, |
| { 0x80bb, 0x18 }, |
| { 0x80bc, 0x50 }, |
| { 0x80bd, 0x00 }, |
| { 0x80be, 0xea }, |
| { 0x80bf, 0xef }, |
| { 0x80c0, 0xfc }, |
| { 0x80c1, 0xbd }, |
| { 0x80c2, 0x1f }, |
| { 0x80c3, 0xfc }, |
| { 0x80c4, 0xdd }, |
| { 0x80c5, 0xaf }, |
| { 0x80c6, 0x00 }, |
| { 0x80c7, 0x38 }, |
| { 0x80c8, 0x30 }, |
| { 0x80c9, 0x05 }, |
| { 0x80ca, 0x4a }, |
| { 0x80cb, 0xd0 }, |
| { 0x80cc, 0x01 }, |
| { 0x80cd, 0xd9 }, |
| { 0x80ce, 0x6f }, |
| { 0x80cf, 0xf9 }, |
| { 0x80d0, 0x70 }, |
| { 0x80d1, 0xdf }, |
| { 0x80d2, 0xf7 }, |
| { 0x80d3, 0xc2 }, |
| { 0x80d4, 0xdf }, |
| { 0x80d5, 0x02 }, |
| { 0x80d6, 0x9a }, |
| { 0x80d7, 0xd0 }, |
| { 0x8250, 0x0d }, |
| { 0x8251, 0xcd }, |
| { 0x8252, 0xe0 }, |
| { 0x8253, 0x05 }, |
| { 0x8254, 0xa7 }, |
| { 0x8255, 0xff }, |
| { 0x8256, 0xed }, |
| { 0x8257, 0x5b }, |
| { 0x8258, 0xae }, |
| { 0x8259, 0xe6 }, |
| { 0x825a, 0x3d }, |
| { 0x825b, 0x0f }, |
| { 0x825c, 0x0d }, |
| { 0x825d, 0xea }, |
| { 0x825e, 0xf2 }, |
| { 0x825f, 0x51 }, |
| { 0x8260, 0xf5 }, |
| { 0x8261, 0x06 }, |
| { 0x821a, 0x01 }, |
| { 0x8546, 0x40 }, |
| { 0x8210, 0x26 }, |
| { 0x8211, 0xf6 }, |
| { 0x8212, 0x84 }, |
| { 0x8213, 0x02 }, |
| { 0x8502, 0x01 }, |
| { 0x8121, 0x04 }, |
| { 0x8122, 0x04 }, |
| { 0x852e, 0x10 }, |
| { 0x80a4, 0xca }, |
| { 0x80a7, 0x40 }, |
| { 0x8526, 0x01 }, |
| }; |
| |
| static int au8522_enable_modulation(struct dvb_frontend *fe, |
| enum fe_modulation m) |
| { |
| struct au8522_state *state = fe->demodulator_priv; |
| int i; |
| |
| dprintk("%s(0x%08x)\n", __func__, m); |
| |
| switch (m) { |
| case VSB_8: |
| dprintk("%s() VSB_8\n", __func__); |
| for (i = 0; i < ARRAY_SIZE(VSB_mod_tab); i++) |
| au8522_writereg(state, |
| VSB_mod_tab[i].reg, |
| VSB_mod_tab[i].data); |
| au8522_set_if(fe, state->config.vsb_if); |
| break; |
| case QAM_64: |
| dprintk("%s() QAM 64\n", __func__); |
| for (i = 0; i < ARRAY_SIZE(QAM64_mod_tab); i++) |
| au8522_writereg(state, |
| QAM64_mod_tab[i].reg, |
| QAM64_mod_tab[i].data); |
| au8522_set_if(fe, state->config.qam_if); |
| break; |
| case QAM_256: |
| if (zv_mode) { |
| dprintk("%s() QAM 256 (zv_mode)\n", __func__); |
| for (i = 0; i < ARRAY_SIZE(QAM256_mod_tab_zv_mode); i++) |
| au8522_writereg(state, |
| QAM256_mod_tab_zv_mode[i].reg, |
| QAM256_mod_tab_zv_mode[i].data); |
| au8522_set_if(fe, state->config.qam_if); |
| msleep(100); |
| au8522_writereg(state, 0x821a, 0x00); |
| } else { |
| dprintk("%s() QAM 256\n", __func__); |
| for (i = 0; i < ARRAY_SIZE(QAM256_mod_tab); i++) |
| au8522_writereg(state, |
| QAM256_mod_tab[i].reg, |
| QAM256_mod_tab[i].data); |
| au8522_set_if(fe, state->config.qam_if); |
| } |
| break; |
| default: |
| dprintk("%s() Invalid modulation\n", __func__); |
| return -EINVAL; |
| } |
| |
| state->current_modulation = m; |
| |
| return 0; |
| } |
| |
| /* Talk to the demod, set the FEC, GUARD, QAM settings etc */ |
| static int au8522_set_frontend(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| struct au8522_state *state = fe->demodulator_priv; |
| int ret = -EINVAL; |
| |
| dprintk("%s(frequency=%d)\n", __func__, c->frequency); |
| |
| if ((state->current_frequency == c->frequency) && |
| (state->current_modulation == c->modulation)) |
| return 0; |
| |
| if (fe->ops.tuner_ops.set_params) { |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| ret = fe->ops.tuner_ops.set_params(fe); |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| } |
| |
| if (ret < 0) |
| return ret; |
| |
| /* Allow the tuner to settle */ |
| if (zv_mode) { |
| dprintk("%s() increase tuner settling time for zv_mode\n", |
| __func__); |
| msleep(250); |
| } else |
| msleep(100); |
| |
| au8522_enable_modulation(fe, c->modulation); |
| |
| state->current_frequency = c->frequency; |
| |
| return 0; |
| } |
| |
| static int au8522_read_status(struct dvb_frontend *fe, enum fe_status *status) |
| { |
| struct au8522_state *state = fe->demodulator_priv; |
| u8 reg; |
| u32 tuner_status = 0; |
| |
| *status = 0; |
| |
| if (state->current_modulation == VSB_8) { |
| dprintk("%s() Checking VSB_8\n", __func__); |
| reg = au8522_readreg(state, 0x4088); |
| if ((reg & 0x03) == 0x03) |
| *status |= FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI; |
| } else { |
| dprintk("%s() Checking QAM\n", __func__); |
| reg = au8522_readreg(state, 0x4541); |
| if (reg & 0x80) |
| *status |= FE_HAS_VITERBI; |
| if (reg & 0x20) |
| *status |= FE_HAS_LOCK | FE_HAS_SYNC; |
| } |
| |
| switch (state->config.status_mode) { |
| case AU8522_DEMODLOCKING: |
| dprintk("%s() DEMODLOCKING\n", __func__); |
| if (*status & FE_HAS_VITERBI) |
| *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; |
| break; |
| case AU8522_TUNERLOCKING: |
| /* Get the tuner status */ |
| dprintk("%s() TUNERLOCKING\n", __func__); |
| if (fe->ops.tuner_ops.get_status) { |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| |
| fe->ops.tuner_ops.get_status(fe, &tuner_status); |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| } |
| if (tuner_status) |
| *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; |
| break; |
| } |
| state->fe_status = *status; |
| |
| if (*status & FE_HAS_LOCK) |
| /* turn on LED, if it isn't on already */ |
| au8522_led_ctrl(state, -1); |
| else |
| /* turn off LED */ |
| au8522_led_ctrl(state, 0); |
| |
| dprintk("%s() status 0x%08x\n", __func__, *status); |
| |
| return 0; |
| } |
| |
| static int au8522_led_status(struct au8522_state *state, const u16 *snr) |
| { |
| struct au8522_led_config *led_config = state->config.led_cfg; |
| int led; |
| u16 strong; |
| |
| /* bail out if we can't control an LED */ |
| if (!led_config) |
| return 0; |
| |
| if (0 == (state->fe_status & FE_HAS_LOCK)) |
| return au8522_led_ctrl(state, 0); |
| else if (state->current_modulation == QAM_256) |
| strong = led_config->qam256_strong; |
| else if (state->current_modulation == QAM_64) |
| strong = led_config->qam64_strong; |
| else /* (state->current_modulation == VSB_8) */ |
| strong = led_config->vsb8_strong; |
| |
| if (*snr >= strong) |
| led = 2; |
| else |
| led = 1; |
| |
| if ((state->led_state) && |
| (((strong < *snr) ? (*snr - strong) : (strong - *snr)) <= 10)) |
| /* snr didn't change enough to bother |
| * changing the color of the led */ |
| return 0; |
| |
| return au8522_led_ctrl(state, led); |
| } |
| |
| static int au8522_read_snr(struct dvb_frontend *fe, u16 *snr) |
| { |
| struct au8522_state *state = fe->demodulator_priv; |
| int ret = -EINVAL; |
| |
| dprintk("%s()\n", __func__); |
| |
| if (state->current_modulation == QAM_256) |
| ret = au8522_mse2snr_lookup(qam256_mse2snr_tab, |
| ARRAY_SIZE(qam256_mse2snr_tab), |
| au8522_readreg(state, 0x4522), |
| snr); |
| else if (state->current_modulation == QAM_64) |
| ret = au8522_mse2snr_lookup(qam64_mse2snr_tab, |
| ARRAY_SIZE(qam64_mse2snr_tab), |
| au8522_readreg(state, 0x4522), |
| snr); |
| else /* VSB_8 */ |
| ret = au8522_mse2snr_lookup(vsb_mse2snr_tab, |
| ARRAY_SIZE(vsb_mse2snr_tab), |
| au8522_readreg(state, 0x4311), |
| snr); |
| |
| if (state->config.led_cfg) |
| au8522_led_status(state, snr); |
| |
| return ret; |
| } |
| |
| static int au8522_read_signal_strength(struct dvb_frontend *fe, |
| u16 *signal_strength) |
| { |
| /* borrowed from lgdt330x.c |
| * |
| * Calculate strength from SNR up to 35dB |
| * Even though the SNR can go higher than 35dB, |
| * there is some comfort factor in having a range of |
| * strong signals that can show at 100% |
| */ |
| u16 snr; |
| u32 tmp; |
| int ret = au8522_read_snr(fe, &snr); |
| |
| *signal_strength = 0; |
| |
| if (0 == ret) { |
| /* The following calculation method was chosen |
| * purely for the sake of code re-use from the |
| * other demod drivers that use this method */ |
| |
| /* Convert from SNR in dB * 10 to 8.24 fixed-point */ |
| tmp = (snr * ((1 << 24) / 10)); |
| |
| /* Convert from 8.24 fixed-point to |
| * scale the range 0 - 35*2^24 into 0 - 65535*/ |
| if (tmp >= 8960 * 0x10000) |
| *signal_strength = 0xffff; |
| else |
| *signal_strength = tmp / 8960; |
| } |
| |
| return ret; |
| } |
| |
| static int au8522_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) |
| { |
| struct au8522_state *state = fe->demodulator_priv; |
| |
| if (state->current_modulation == VSB_8) |
| *ucblocks = au8522_readreg(state, 0x4087); |
| else |
| *ucblocks = au8522_readreg(state, 0x4543); |
| |
| return 0; |
| } |
| |
| static int au8522_read_ber(struct dvb_frontend *fe, u32 *ber) |
| { |
| return au8522_read_ucblocks(fe, ber); |
| } |
| |
| static int au8522_get_frontend(struct dvb_frontend *fe, |
| struct dtv_frontend_properties *c) |
| { |
| struct au8522_state *state = fe->demodulator_priv; |
| |
| c->frequency = state->current_frequency; |
| c->modulation = state->current_modulation; |
| |
| return 0; |
| } |
| |
| static int au8522_get_tune_settings(struct dvb_frontend *fe, |
| struct dvb_frontend_tune_settings *tune) |
| { |
| tune->min_delay_ms = 1000; |
| return 0; |
| } |
| |
| static struct dvb_frontend_ops au8522_ops; |
| |
| |
| static void au8522_release(struct dvb_frontend *fe) |
| { |
| struct au8522_state *state = fe->demodulator_priv; |
| au8522_release_state(state); |
| } |
| |
| struct dvb_frontend *au8522_attach(const struct au8522_config *config, |
| struct i2c_adapter *i2c) |
| { |
| struct au8522_state *state = NULL; |
| int instance; |
| |
| /* allocate memory for the internal state */ |
| instance = au8522_get_state(&state, i2c, config->demod_address); |
| switch (instance) { |
| case 0: |
| dprintk("%s state allocation failed\n", __func__); |
| break; |
| case 1: |
| /* new demod instance */ |
| dprintk("%s using new instance\n", __func__); |
| break; |
| default: |
| /* existing demod instance */ |
| dprintk("%s using existing instance\n", __func__); |
| break; |
| } |
| |
| /* setup the state */ |
| state->config = *config; |
| state->i2c = i2c; |
| state->operational_mode = AU8522_DIGITAL_MODE; |
| |
| /* create dvb_frontend */ |
| memcpy(&state->frontend.ops, &au8522_ops, |
| sizeof(struct dvb_frontend_ops)); |
| state->frontend.demodulator_priv = state; |
| |
| state->frontend.ops.analog_ops.i2c_gate_ctrl = au8522_analog_i2c_gate_ctrl; |
| |
| if (au8522_init(&state->frontend) != 0) { |
| printk(KERN_ERR "%s: Failed to initialize correctly\n", |
| __func__); |
| goto error; |
| } |
| |
| /* Note: Leaving the I2C gate open here. */ |
| au8522_i2c_gate_ctrl(&state->frontend, 1); |
| |
| return &state->frontend; |
| |
| error: |
| au8522_release_state(state); |
| return NULL; |
| } |
| EXPORT_SYMBOL(au8522_attach); |
| |
| static struct dvb_frontend_ops au8522_ops = { |
| .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B }, |
| .info = { |
| .name = "Auvitek AU8522 QAM/8VSB Frontend", |
| .frequency_min = 54000000, |
| .frequency_max = 858000000, |
| .frequency_stepsize = 62500, |
| .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB |
| }, |
| |
| .init = au8522_init, |
| .sleep = au8522_sleep, |
| .i2c_gate_ctrl = au8522_i2c_gate_ctrl, |
| .set_frontend = au8522_set_frontend, |
| .get_frontend = au8522_get_frontend, |
| .get_tune_settings = au8522_get_tune_settings, |
| .read_status = au8522_read_status, |
| .read_ber = au8522_read_ber, |
| .read_signal_strength = au8522_read_signal_strength, |
| .read_snr = au8522_read_snr, |
| .read_ucblocks = au8522_read_ucblocks, |
| .release = au8522_release, |
| }; |
| |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Enable verbose debug messages"); |
| |
| module_param(zv_mode, int, 0644); |
| MODULE_PARM_DESC(zv_mode, "Turn on/off ZeeVee modulator compatibility mode (default:on).\n" |
| "\t\ton - modified AU8522 QAM256 initialization.\n" |
| "\t\tProvides faster lock when using ZeeVee modulator based sources"); |
| |
| MODULE_DESCRIPTION("Auvitek AU8522 QAM-B/ATSC Demodulator driver"); |
| MODULE_AUTHOR("Steven Toth"); |
| MODULE_LICENSE("GPL"); |