| /* |
| * |
| * Bluetooth support for Intel devices |
| * |
| * Copyright (C) 2015 Intel Corporation |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/firmware.h> |
| #include <linux/regmap.h> |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| |
| #include "btintel.h" |
| |
| #define VERSION "0.1" |
| |
| #define BDADDR_INTEL (&(bdaddr_t) {{0x00, 0x8b, 0x9e, 0x19, 0x03, 0x00}}) |
| |
| int btintel_check_bdaddr(struct hci_dev *hdev) |
| { |
| struct hci_rp_read_bd_addr *bda; |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| int err = PTR_ERR(skb); |
| BT_ERR("%s: Reading Intel device address failed (%d)", |
| hdev->name, err); |
| return err; |
| } |
| |
| if (skb->len != sizeof(*bda)) { |
| BT_ERR("%s: Intel device address length mismatch", hdev->name); |
| kfree_skb(skb); |
| return -EIO; |
| } |
| |
| bda = (struct hci_rp_read_bd_addr *)skb->data; |
| |
| /* For some Intel based controllers, the default Bluetooth device |
| * address 00:03:19:9E:8B:00 can be found. These controllers are |
| * fully operational, but have the danger of duplicate addresses |
| * and that in turn can cause problems with Bluetooth operation. |
| */ |
| if (!bacmp(&bda->bdaddr, BDADDR_INTEL)) { |
| BT_ERR("%s: Found Intel default device address (%pMR)", |
| hdev->name, &bda->bdaddr); |
| set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); |
| } |
| |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_check_bdaddr); |
| |
| int btintel_enter_mfg(struct hci_dev *hdev) |
| { |
| const u8 param[] = { 0x01, 0x00 }; |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc11, 2, param, HCI_CMD_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "Entering manufacturer mode failed (%ld)", |
| PTR_ERR(skb)); |
| return PTR_ERR(skb); |
| } |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_enter_mfg); |
| |
| int btintel_exit_mfg(struct hci_dev *hdev, bool reset, bool patched) |
| { |
| u8 param[] = { 0x00, 0x00 }; |
| struct sk_buff *skb; |
| |
| /* The 2nd command parameter specifies the manufacturing exit method: |
| * 0x00: Just disable the manufacturing mode (0x00). |
| * 0x01: Disable manufacturing mode and reset with patches deactivated. |
| * 0x02: Disable manufacturing mode and reset with patches activated. |
| */ |
| if (reset) |
| param[1] |= patched ? 0x02 : 0x01; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc11, 2, param, HCI_CMD_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "Exiting manufacturer mode failed (%ld)", |
| PTR_ERR(skb)); |
| return PTR_ERR(skb); |
| } |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_exit_mfg); |
| |
| int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) |
| { |
| struct sk_buff *skb; |
| int err; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc31, 6, bdaddr, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| err = PTR_ERR(skb); |
| BT_ERR("%s: Changing Intel device address failed (%d)", |
| hdev->name, err); |
| return err; |
| } |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_set_bdaddr); |
| |
| int btintel_set_diag(struct hci_dev *hdev, bool enable) |
| { |
| struct sk_buff *skb; |
| u8 param[3]; |
| int err; |
| |
| if (enable) { |
| param[0] = 0x03; |
| param[1] = 0x03; |
| param[2] = 0x03; |
| } else { |
| param[0] = 0x00; |
| param[1] = 0x00; |
| param[2] = 0x00; |
| } |
| |
| skb = __hci_cmd_sync(hdev, 0xfc43, 3, param, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| err = PTR_ERR(skb); |
| if (err == -ENODATA) |
| goto done; |
| BT_ERR("%s: Changing Intel diagnostic mode failed (%d)", |
| hdev->name, err); |
| return err; |
| } |
| kfree_skb(skb); |
| |
| done: |
| btintel_set_event_mask(hdev, enable); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_set_diag); |
| |
| int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable) |
| { |
| int err, ret; |
| |
| err = btintel_enter_mfg(hdev); |
| if (err) |
| return err; |
| |
| ret = btintel_set_diag(hdev, enable); |
| |
| err = btintel_exit_mfg(hdev, false, false); |
| if (err) |
| return err; |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(btintel_set_diag_mfg); |
| |
| void btintel_hw_error(struct hci_dev *hdev, u8 code) |
| { |
| struct sk_buff *skb; |
| u8 type = 0x00; |
| |
| BT_ERR("%s: Hardware error 0x%2.2x", hdev->name, code); |
| |
| skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| BT_ERR("%s: Reset after hardware error failed (%ld)", |
| hdev->name, PTR_ERR(skb)); |
| return; |
| } |
| kfree_skb(skb); |
| |
| skb = __hci_cmd_sync(hdev, 0xfc22, 1, &type, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| BT_ERR("%s: Retrieving Intel exception info failed (%ld)", |
| hdev->name, PTR_ERR(skb)); |
| return; |
| } |
| |
| if (skb->len != 13) { |
| BT_ERR("%s: Exception info size mismatch", hdev->name); |
| kfree_skb(skb); |
| return; |
| } |
| |
| BT_ERR("%s: Exception info %s", hdev->name, (char *)(skb->data + 1)); |
| |
| kfree_skb(skb); |
| } |
| EXPORT_SYMBOL_GPL(btintel_hw_error); |
| |
| void btintel_version_info(struct hci_dev *hdev, struct intel_version *ver) |
| { |
| const char *variant; |
| |
| switch (ver->fw_variant) { |
| case 0x06: |
| variant = "Bootloader"; |
| break; |
| case 0x23: |
| variant = "Firmware"; |
| break; |
| default: |
| return; |
| } |
| |
| BT_INFO("%s: %s revision %u.%u build %u week %u %u", hdev->name, |
| variant, ver->fw_revision >> 4, ver->fw_revision & 0x0f, |
| ver->fw_build_num, ver->fw_build_ww, 2000 + ver->fw_build_yy); |
| } |
| EXPORT_SYMBOL_GPL(btintel_version_info); |
| |
| int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen, |
| const void *param) |
| { |
| while (plen > 0) { |
| struct sk_buff *skb; |
| u8 cmd_param[253], fragment_len = (plen > 252) ? 252 : plen; |
| |
| cmd_param[0] = fragment_type; |
| memcpy(cmd_param + 1, param, fragment_len); |
| |
| skb = __hci_cmd_sync(hdev, 0xfc09, fragment_len + 1, |
| cmd_param, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) |
| return PTR_ERR(skb); |
| |
| kfree_skb(skb); |
| |
| plen -= fragment_len; |
| param += fragment_len; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_secure_send); |
| |
| int btintel_load_ddc_config(struct hci_dev *hdev, const char *ddc_name) |
| { |
| const struct firmware *fw; |
| struct sk_buff *skb; |
| const u8 *fw_ptr; |
| int err; |
| |
| err = request_firmware_direct(&fw, ddc_name, &hdev->dev); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to load Intel DDC file %s (%d)", |
| ddc_name, err); |
| return err; |
| } |
| |
| bt_dev_info(hdev, "Found Intel DDC parameters: %s", ddc_name); |
| |
| fw_ptr = fw->data; |
| |
| /* DDC file contains one or more DDC structure which has |
| * Length (1 byte), DDC ID (2 bytes), and DDC value (Length - 2). |
| */ |
| while (fw->size > fw_ptr - fw->data) { |
| u8 cmd_plen = fw_ptr[0] + sizeof(u8); |
| |
| skb = __hci_cmd_sync(hdev, 0xfc8b, cmd_plen, fw_ptr, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "Failed to send Intel_Write_DDC (%ld)", |
| PTR_ERR(skb)); |
| release_firmware(fw); |
| return PTR_ERR(skb); |
| } |
| |
| fw_ptr += cmd_plen; |
| kfree_skb(skb); |
| } |
| |
| release_firmware(fw); |
| |
| bt_dev_info(hdev, "Applying Intel DDC parameters completed"); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_load_ddc_config); |
| |
| int btintel_set_event_mask(struct hci_dev *hdev, bool debug) |
| { |
| u8 mask[8] = { 0x87, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; |
| struct sk_buff *skb; |
| int err; |
| |
| if (debug) |
| mask[1] |= 0x62; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc52, 8, mask, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| err = PTR_ERR(skb); |
| BT_ERR("%s: Setting Intel event mask failed (%d)", |
| hdev->name, err); |
| return err; |
| } |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_set_event_mask); |
| |
| int btintel_set_event_mask_mfg(struct hci_dev *hdev, bool debug) |
| { |
| int err, ret; |
| |
| err = btintel_enter_mfg(hdev); |
| if (err) |
| return err; |
| |
| ret = btintel_set_event_mask(hdev, debug); |
| |
| err = btintel_exit_mfg(hdev, false, false); |
| if (err) |
| return err; |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(btintel_set_event_mask_mfg); |
| |
| int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver) |
| { |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_CMD_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "Reading Intel version information failed (%ld)", |
| PTR_ERR(skb)); |
| return PTR_ERR(skb); |
| } |
| |
| if (skb->len != sizeof(*ver)) { |
| bt_dev_err(hdev, "Intel version event size mismatch"); |
| kfree_skb(skb); |
| return -EILSEQ; |
| } |
| |
| memcpy(ver, skb->data, sizeof(*ver)); |
| |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btintel_read_version); |
| |
| /* ------- REGMAP IBT SUPPORT ------- */ |
| |
| #define IBT_REG_MODE_8BIT 0x00 |
| #define IBT_REG_MODE_16BIT 0x01 |
| #define IBT_REG_MODE_32BIT 0x02 |
| |
| struct regmap_ibt_context { |
| struct hci_dev *hdev; |
| __u16 op_write; |
| __u16 op_read; |
| }; |
| |
| struct ibt_cp_reg_access { |
| __le32 addr; |
| __u8 mode; |
| __u8 len; |
| __u8 data[0]; |
| } __packed; |
| |
| struct ibt_rp_reg_access { |
| __u8 status; |
| __le32 addr; |
| __u8 data[0]; |
| } __packed; |
| |
| static int regmap_ibt_read(void *context, const void *addr, size_t reg_size, |
| void *val, size_t val_size) |
| { |
| struct regmap_ibt_context *ctx = context; |
| struct ibt_cp_reg_access cp; |
| struct ibt_rp_reg_access *rp; |
| struct sk_buff *skb; |
| int err = 0; |
| |
| if (reg_size != sizeof(__le32)) |
| return -EINVAL; |
| |
| switch (val_size) { |
| case 1: |
| cp.mode = IBT_REG_MODE_8BIT; |
| break; |
| case 2: |
| cp.mode = IBT_REG_MODE_16BIT; |
| break; |
| case 4: |
| cp.mode = IBT_REG_MODE_32BIT; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* regmap provides a little-endian formatted addr */ |
| cp.addr = *(__le32 *)addr; |
| cp.len = val_size; |
| |
| bt_dev_dbg(ctx->hdev, "Register (0x%x) read", le32_to_cpu(cp.addr)); |
| |
| skb = hci_cmd_sync(ctx->hdev, ctx->op_read, sizeof(cp), &cp, |
| HCI_CMD_TIMEOUT); |
| if (IS_ERR(skb)) { |
| err = PTR_ERR(skb); |
| bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error (%d)", |
| le32_to_cpu(cp.addr), err); |
| return err; |
| } |
| |
| if (skb->len != sizeof(*rp) + val_size) { |
| bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error, bad len", |
| le32_to_cpu(cp.addr)); |
| err = -EINVAL; |
| goto done; |
| } |
| |
| rp = (struct ibt_rp_reg_access *)skb->data; |
| |
| if (rp->addr != cp.addr) { |
| bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error, bad addr", |
| le32_to_cpu(rp->addr)); |
| err = -EINVAL; |
| goto done; |
| } |
| |
| memcpy(val, rp->data, val_size); |
| |
| done: |
| kfree_skb(skb); |
| return err; |
| } |
| |
| static int regmap_ibt_gather_write(void *context, |
| const void *addr, size_t reg_size, |
| const void *val, size_t val_size) |
| { |
| struct regmap_ibt_context *ctx = context; |
| struct ibt_cp_reg_access *cp; |
| struct sk_buff *skb; |
| int plen = sizeof(*cp) + val_size; |
| u8 mode; |
| int err = 0; |
| |
| if (reg_size != sizeof(__le32)) |
| return -EINVAL; |
| |
| switch (val_size) { |
| case 1: |
| mode = IBT_REG_MODE_8BIT; |
| break; |
| case 2: |
| mode = IBT_REG_MODE_16BIT; |
| break; |
| case 4: |
| mode = IBT_REG_MODE_32BIT; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| cp = kmalloc(plen, GFP_KERNEL); |
| if (!cp) |
| return -ENOMEM; |
| |
| /* regmap provides a little-endian formatted addr/value */ |
| cp->addr = *(__le32 *)addr; |
| cp->mode = mode; |
| cp->len = val_size; |
| memcpy(&cp->data, val, val_size); |
| |
| bt_dev_dbg(ctx->hdev, "Register (0x%x) write", le32_to_cpu(cp->addr)); |
| |
| skb = hci_cmd_sync(ctx->hdev, ctx->op_write, plen, cp, HCI_CMD_TIMEOUT); |
| if (IS_ERR(skb)) { |
| err = PTR_ERR(skb); |
| bt_dev_err(ctx->hdev, "regmap: Register (0x%x) write error (%d)", |
| le32_to_cpu(cp->addr), err); |
| goto done; |
| } |
| kfree_skb(skb); |
| |
| done: |
| kfree(cp); |
| return err; |
| } |
| |
| static int regmap_ibt_write(void *context, const void *data, size_t count) |
| { |
| /* data contains register+value, since we only support 32bit addr, |
| * minimum data size is 4 bytes. |
| */ |
| if (WARN_ONCE(count < 4, "Invalid register access")) |
| return -EINVAL; |
| |
| return regmap_ibt_gather_write(context, data, 4, data + 4, count - 4); |
| } |
| |
| static void regmap_ibt_free_context(void *context) |
| { |
| kfree(context); |
| } |
| |
| static struct regmap_bus regmap_ibt = { |
| .read = regmap_ibt_read, |
| .write = regmap_ibt_write, |
| .gather_write = regmap_ibt_gather_write, |
| .free_context = regmap_ibt_free_context, |
| .reg_format_endian_default = REGMAP_ENDIAN_LITTLE, |
| .val_format_endian_default = REGMAP_ENDIAN_LITTLE, |
| }; |
| |
| /* Config is the same for all register regions */ |
| static const struct regmap_config regmap_ibt_cfg = { |
| .name = "btintel_regmap", |
| .reg_bits = 32, |
| .val_bits = 32, |
| }; |
| |
| struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read, |
| u16 opcode_write) |
| { |
| struct regmap_ibt_context *ctx; |
| |
| bt_dev_info(hdev, "regmap: Init R%x-W%x region", opcode_read, |
| opcode_write); |
| |
| ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return ERR_PTR(-ENOMEM); |
| |
| ctx->op_read = opcode_read; |
| ctx->op_write = opcode_write; |
| ctx->hdev = hdev; |
| |
| return regmap_init(&hdev->dev, ®map_ibt, ctx, ®map_ibt_cfg); |
| } |
| EXPORT_SYMBOL_GPL(btintel_regmap_init); |
| |
| MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); |
| MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION); |
| MODULE_VERSION(VERSION); |
| MODULE_LICENSE("GPL"); |
| MODULE_FIRMWARE("intel/ibt-11-5.sfi"); |
| MODULE_FIRMWARE("intel/ibt-11-5.ddc"); |