| /* |
| * Copyright (C) 2011 Marvell International Ltd. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #ifndef __ASM_ARCH_REGS_USB_H |
| #define __ASM_ARCH_REGS_USB_H |
| |
| #define PXA168_U2O_REGBASE (0xd4208000) |
| #define PXA168_U2O_PHYBASE (0xd4207000) |
| |
| #define PXA168_U2H_REGBASE (0xd4209000) |
| #define PXA168_U2H_PHYBASE (0xd4206000) |
| |
| #define MMP3_HSIC1_REGBASE (0xf0001000) |
| #define MMP3_HSIC1_PHYBASE (0xf0001800) |
| |
| #define MMP3_HSIC2_REGBASE (0xf0002000) |
| #define MMP3_HSIC2_PHYBASE (0xf0002800) |
| |
| #define MMP3_FSIC_REGBASE (0xf0003000) |
| #define MMP3_FSIC_PHYBASE (0xf0003800) |
| |
| |
| #define USB_REG_RANGE (0x1ff) |
| #define USB_PHY_RANGE (0xff) |
| |
| /* registers */ |
| #define U2x_CAPREGS_OFFSET 0x100 |
| |
| /* phy regs */ |
| #define UTMI_REVISION 0x0 |
| #define UTMI_CTRL 0x4 |
| #define UTMI_PLL 0x8 |
| #define UTMI_TX 0xc |
| #define UTMI_RX 0x10 |
| #define UTMI_IVREF 0x14 |
| #define UTMI_T0 0x18 |
| #define UTMI_T1 0x1c |
| #define UTMI_T2 0x20 |
| #define UTMI_T3 0x24 |
| #define UTMI_T4 0x28 |
| #define UTMI_T5 0x2c |
| #define UTMI_RESERVE 0x30 |
| #define UTMI_USB_INT 0x34 |
| #define UTMI_DBG_CTL 0x38 |
| #define UTMI_OTG_ADDON 0x3c |
| |
| /* For UTMICTRL Register */ |
| #define UTMI_CTRL_USB_CLK_EN (1 << 31) |
| /* pxa168 */ |
| #define UTMI_CTRL_SUSPEND_SET1 (1 << 30) |
| #define UTMI_CTRL_SUSPEND_SET2 (1 << 29) |
| #define UTMI_CTRL_RXBUF_PDWN (1 << 24) |
| #define UTMI_CTRL_TXBUF_PDWN (1 << 11) |
| |
| #define UTMI_CTRL_INPKT_DELAY_SHIFT 30 |
| #define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT 28 |
| #define UTMI_CTRL_PU_REF_SHIFT 20 |
| #define UTMI_CTRL_ARC_PULLDN_SHIFT 12 |
| #define UTMI_CTRL_PLL_PWR_UP_SHIFT 1 |
| #define UTMI_CTRL_PWR_UP_SHIFT 0 |
| |
| /* For UTMI_PLL Register */ |
| #define UTMI_PLL_PLLCALI12_SHIFT 29 |
| #define UTMI_PLL_PLLCALI12_MASK (0x3 << 29) |
| |
| #define UTMI_PLL_PLLVDD18_SHIFT 27 |
| #define UTMI_PLL_PLLVDD18_MASK (0x3 << 27) |
| |
| #define UTMI_PLL_PLLVDD12_SHIFT 25 |
| #define UTMI_PLL_PLLVDD12_MASK (0x3 << 25) |
| |
| #define UTMI_PLL_CLK_BLK_EN_SHIFT 24 |
| #define CLK_BLK_EN (0x1 << 24) |
| #define PLL_READY (0x1 << 23) |
| #define KVCO_EXT (0x1 << 22) |
| #define VCOCAL_START (0x1 << 21) |
| |
| #define UTMI_PLL_KVCO_SHIFT 15 |
| #define UTMI_PLL_KVCO_MASK (0x7 << 15) |
| |
| #define UTMI_PLL_ICP_SHIFT 12 |
| #define UTMI_PLL_ICP_MASK (0x7 << 12) |
| |
| #define UTMI_PLL_FBDIV_SHIFT 4 |
| #define UTMI_PLL_FBDIV_MASK (0xFF << 4) |
| |
| #define UTMI_PLL_REFDIV_SHIFT 0 |
| #define UTMI_PLL_REFDIV_MASK (0xF << 0) |
| |
| /* For UTMI_TX Register */ |
| #define UTMI_TX_REG_EXT_FS_RCAL_SHIFT 27 |
| #define UTMI_TX_REG_EXT_FS_RCAL_MASK (0xf << 27) |
| |
| #define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT 26 |
| #define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK (0x1 << 26) |
| |
| #define UTMI_TX_TXVDD12_SHIFT 22 |
| #define UTMI_TX_TXVDD12_MASK (0x3 << 22) |
| |
| #define UTMI_TX_CK60_PHSEL_SHIFT 17 |
| #define UTMI_TX_CK60_PHSEL_MASK (0xf << 17) |
| |
| #define UTMI_TX_IMPCAL_VTH_SHIFT 14 |
| #define UTMI_TX_IMPCAL_VTH_MASK (0x7 << 14) |
| |
| #define REG_RCAL_START (0x1 << 12) |
| |
| #define UTMI_TX_LOW_VDD_EN_SHIFT 11 |
| |
| #define UTMI_TX_AMP_SHIFT 0 |
| #define UTMI_TX_AMP_MASK (0x7 << 0) |
| |
| /* For UTMI_RX Register */ |
| #define UTMI_REG_SQ_LENGTH_SHIFT 15 |
| #define UTMI_REG_SQ_LENGTH_MASK (0x3 << 15) |
| |
| #define UTMI_RX_SQ_THRESH_SHIFT 4 |
| #define UTMI_RX_SQ_THRESH_MASK (0xf << 4) |
| |
| #define UTMI_OTG_ADDON_OTG_ON (1 << 0) |
| |
| /* For MMP3 USB Phy */ |
| #define USB2_PLL_REG0 0x4 |
| #define USB2_PLL_REG1 0x8 |
| #define USB2_TX_REG0 0x10 |
| #define USB2_TX_REG1 0x14 |
| #define USB2_TX_REG2 0x18 |
| #define USB2_RX_REG0 0x20 |
| #define USB2_RX_REG1 0x24 |
| #define USB2_RX_REG2 0x28 |
| #define USB2_ANA_REG0 0x30 |
| #define USB2_ANA_REG1 0x34 |
| #define USB2_ANA_REG2 0x38 |
| #define USB2_DIG_REG0 0x3C |
| #define USB2_DIG_REG1 0x40 |
| #define USB2_DIG_REG2 0x44 |
| #define USB2_DIG_REG3 0x48 |
| #define USB2_TEST_REG0 0x4C |
| #define USB2_TEST_REG1 0x50 |
| #define USB2_TEST_REG2 0x54 |
| #define USB2_CHARGER_REG0 0x58 |
| #define USB2_OTG_REG0 0x5C |
| #define USB2_PHY_MON0 0x60 |
| #define USB2_RESETVE_REG0 0x64 |
| #define USB2_ICID_REG0 0x78 |
| #define USB2_ICID_REG1 0x7C |
| |
| /* USB2_PLL_REG0 */ |
| /* This is for Ax stepping */ |
| #define USB2_PLL_FBDIV_SHIFT_MMP3 0 |
| #define USB2_PLL_FBDIV_MASK_MMP3 (0xFF << 0) |
| |
| #define USB2_PLL_REFDIV_SHIFT_MMP3 8 |
| #define USB2_PLL_REFDIV_MASK_MMP3 (0xF << 8) |
| |
| #define USB2_PLL_VDD12_SHIFT_MMP3 12 |
| #define USB2_PLL_VDD18_SHIFT_MMP3 14 |
| |
| /* This is for B0 stepping */ |
| #define USB2_PLL_FBDIV_SHIFT_MMP3_B0 0 |
| #define USB2_PLL_REFDIV_SHIFT_MMP3_B0 9 |
| #define USB2_PLL_VDD18_SHIFT_MMP3_B0 14 |
| #define USB2_PLL_FBDIV_MASK_MMP3_B0 0x01FF |
| #define USB2_PLL_REFDIV_MASK_MMP3_B0 0x3E00 |
| |
| #define USB2_PLL_CAL12_SHIFT_MMP3 0 |
| #define USB2_PLL_CALI12_MASK_MMP3 (0x3 << 0) |
| |
| #define USB2_PLL_VCOCAL_START_SHIFT_MMP3 2 |
| |
| #define USB2_PLL_KVCO_SHIFT_MMP3 4 |
| #define USB2_PLL_KVCO_MASK_MMP3 (0x7<<4) |
| |
| #define USB2_PLL_ICP_SHIFT_MMP3 8 |
| #define USB2_PLL_ICP_MASK_MMP3 (0x7<<8) |
| |
| #define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 12 |
| |
| #define USB2_PLL_PU_PLL_SHIFT_MMP3 13 |
| #define USB2_PLL_PU_PLL_MASK (0x1 << 13) |
| |
| #define USB2_PLL_READY_MASK_MMP3 (0x1 << 15) |
| |
| /* USB2_TX_REG0 */ |
| #define USB2_TX_IMPCAL_VTH_SHIFT_MMP3 8 |
| #define USB2_TX_IMPCAL_VTH_MASK_MMP3 (0x7 << 8) |
| |
| #define USB2_TX_RCAL_START_SHIFT_MMP3 13 |
| |
| /* USB2_TX_REG1 */ |
| #define USB2_TX_CK60_PHSEL_SHIFT_MMP3 0 |
| #define USB2_TX_CK60_PHSEL_MASK_MMP3 (0xf << 0) |
| |
| #define USB2_TX_AMP_SHIFT_MMP3 4 |
| #define USB2_TX_AMP_MASK_MMP3 (0x7 << 4) |
| |
| #define USB2_TX_VDD12_SHIFT_MMP3 8 |
| #define USB2_TX_VDD12_MASK_MMP3 (0x3 << 8) |
| |
| /* USB2_TX_REG2 */ |
| #define USB2_TX_DRV_SLEWRATE_SHIFT 10 |
| |
| /* USB2_RX_REG0 */ |
| #define USB2_RX_SQ_THRESH_SHIFT_MMP3 4 |
| #define USB2_RX_SQ_THRESH_MASK_MMP3 (0xf << 4) |
| |
| #define USB2_RX_SQ_LENGTH_SHIFT_MMP3 10 |
| #define USB2_RX_SQ_LENGTH_MASK_MMP3 (0x3 << 10) |
| |
| /* USB2_ANA_REG1*/ |
| #define USB2_ANA_PU_ANA_SHIFT_MMP3 14 |
| |
| /* USB2_OTG_REG0 */ |
| #define USB2_OTG_PU_OTG_SHIFT_MMP3 3 |
| |
| /* fsic registers */ |
| #define FSIC_MISC 0x4 |
| #define FSIC_INT 0x28 |
| #define FSIC_CTRL 0x30 |
| |
| /* HSIC registers */ |
| #define HSIC_PAD_CTRL 0x4 |
| |
| #define HSIC_CTRL 0x8 |
| #define HSIC_CTRL_HSIC_ENABLE (1<<7) |
| #define HSIC_CTRL_PLL_BYPASS (1<<4) |
| |
| #define TEST_GRP_0 0xc |
| #define TEST_GRP_1 0x10 |
| |
| #define HSIC_INT 0x14 |
| #define HSIC_INT_READY_INT_EN (1<<10) |
| #define HSIC_INT_CONNECT_INT_EN (1<<9) |
| #define HSIC_INT_CORE_INT_EN (1<<8) |
| #define HSIC_INT_HS_READY (1<<2) |
| #define HSIC_INT_CONNECT (1<<1) |
| #define HSIC_INT_CORE (1<<0) |
| |
| #define HSIC_CONFIG 0x18 |
| #define USBHSIC_CTRL 0x20 |
| |
| #define HSIC_USB_CTRL 0x28 |
| #define HSIC_USB_CTRL_CLKEN 1 |
| #define HSIC_USB_CLK_PHY 0x0 |
| #define HSIC_USB_CLK_PMU 0x1 |
| |
| #endif /* __ASM_ARCH_PXA_U2O_H */ |
