| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2003, 04, 05 Ralf Baechle (ralf@linux-mips.org) |
| * Copyright (C) 2007 Maciej W. Rozycki |
| * Copyright (C) 2008 Thiemo Seufer |
| * Copyright (C) 2012 MIPS Technologies, Inc. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/smp.h> |
| #include <linux/mm.h> |
| #include <linux/module.h> |
| #include <linux/proc_fs.h> |
| |
| #include <asm/bugs.h> |
| #include <asm/cacheops.h> |
| #include <asm/cpu-type.h> |
| #include <asm/inst.h> |
| #include <asm/io.h> |
| #include <asm/page.h> |
| #include <asm/pgtable.h> |
| #include <asm/prefetch.h> |
| #include <asm/bootinfo.h> |
| #include <asm/mipsregs.h> |
| #include <asm/mmu_context.h> |
| #include <asm/cpu.h> |
| #include <asm/war.h> |
| |
| #ifdef CONFIG_SIBYTE_DMA_PAGEOPS |
| #include <asm/sibyte/sb1250.h> |
| #include <asm/sibyte/sb1250_regs.h> |
| #include <asm/sibyte/sb1250_dma.h> |
| #endif |
| |
| #include <asm/uasm.h> |
| |
| /* Registers used in the assembled routines. */ |
| #define ZERO 0 |
| #define AT 2 |
| #define A0 4 |
| #define A1 5 |
| #define A2 6 |
| #define T0 8 |
| #define T1 9 |
| #define T2 10 |
| #define T3 11 |
| #define T9 25 |
| #define RA 31 |
| |
| /* Handle labels (which must be positive integers). */ |
| enum label_id { |
| label_clear_nopref = 1, |
| label_clear_pref, |
| label_copy_nopref, |
| label_copy_pref_both, |
| label_copy_pref_store, |
| }; |
| |
| UASM_L_LA(_clear_nopref) |
| UASM_L_LA(_clear_pref) |
| UASM_L_LA(_copy_nopref) |
| UASM_L_LA(_copy_pref_both) |
| UASM_L_LA(_copy_pref_store) |
| |
| /* We need one branch and therefore one relocation per target label. */ |
| static struct uasm_label labels[5]; |
| static struct uasm_reloc relocs[5]; |
| |
| #define cpu_is_r4600_v1_x() ((read_c0_prid() & 0xfffffff0) == 0x00002010) |
| #define cpu_is_r4600_v2_x() ((read_c0_prid() & 0xfffffff0) == 0x00002020) |
| |
| /* |
| * R6 has a limited offset of the pref instruction. |
| * Skip it if the offset is more than 9 bits. |
| */ |
| #define _uasm_i_pref(a, b, c, d) \ |
| do { \ |
| if (cpu_has_mips_r6) { \ |
| if (c <= 0xff && c >= -0x100) \ |
| uasm_i_pref(a, b, c, d);\ |
| } else { \ |
| uasm_i_pref(a, b, c, d); \ |
| } \ |
| } while(0) |
| |
| static int pref_bias_clear_store; |
| static int pref_bias_copy_load; |
| static int pref_bias_copy_store; |
| |
| static u32 pref_src_mode; |
| static u32 pref_dst_mode; |
| |
| static int clear_word_size; |
| static int copy_word_size; |
| |
| static int half_clear_loop_size; |
| static int half_copy_loop_size; |
| |
| static int cache_line_size; |
| #define cache_line_mask() (cache_line_size - 1) |
| |
| static inline void |
| pg_addiu(u32 **buf, unsigned int reg1, unsigned int reg2, unsigned int off) |
| { |
| if (cpu_has_64bit_gp_regs && DADDI_WAR && r4k_daddiu_bug()) { |
| if (off > 0x7fff) { |
| uasm_i_lui(buf, T9, uasm_rel_hi(off)); |
| uasm_i_addiu(buf, T9, T9, uasm_rel_lo(off)); |
| } else |
| uasm_i_addiu(buf, T9, ZERO, off); |
| uasm_i_daddu(buf, reg1, reg2, T9); |
| } else { |
| if (off > 0x7fff) { |
| uasm_i_lui(buf, T9, uasm_rel_hi(off)); |
| uasm_i_addiu(buf, T9, T9, uasm_rel_lo(off)); |
| UASM_i_ADDU(buf, reg1, reg2, T9); |
| } else |
| UASM_i_ADDIU(buf, reg1, reg2, off); |
| } |
| } |
| |
| static void set_prefetch_parameters(void) |
| { |
| if (cpu_has_64bit_gp_regs || cpu_has_64bit_zero_reg) |
| clear_word_size = 8; |
| else |
| clear_word_size = 4; |
| |
| if (cpu_has_64bit_gp_regs) |
| copy_word_size = 8; |
| else |
| copy_word_size = 4; |
| |
| /* |
| * The pref's used here are using "streaming" hints, which cause the |
| * copied data to be kicked out of the cache sooner. A page copy often |
| * ends up copying a lot more data than is commonly used, so this seems |
| * to make sense in terms of reducing cache pollution, but I've no real |
| * performance data to back this up. |
| */ |
| if (cpu_has_prefetch) { |
| /* |
| * XXX: Most prefetch bias values in here are based on |
| * guesswork. |
| */ |
| cache_line_size = cpu_dcache_line_size(); |
| switch (current_cpu_type()) { |
| case CPU_R5500: |
| case CPU_TX49XX: |
| /* These processors only support the Pref_Load. */ |
| pref_bias_copy_load = 256; |
| break; |
| |
| case CPU_R10000: |
| case CPU_R12000: |
| case CPU_R14000: |
| case CPU_R16000: |
| /* |
| * Those values have been experimentally tuned for an |
| * Origin 200. |
| */ |
| pref_bias_clear_store = 512; |
| pref_bias_copy_load = 256; |
| pref_bias_copy_store = 256; |
| pref_src_mode = Pref_LoadStreamed; |
| pref_dst_mode = Pref_StoreStreamed; |
| break; |
| |
| case CPU_SB1: |
| case CPU_SB1A: |
| pref_bias_clear_store = 128; |
| pref_bias_copy_load = 128; |
| pref_bias_copy_store = 128; |
| /* |
| * SB1 pass1 Pref_LoadStreamed/Pref_StoreStreamed |
| * hints are broken. |
| */ |
| if (current_cpu_type() == CPU_SB1 && |
| (current_cpu_data.processor_id & 0xff) < 0x02) { |
| pref_src_mode = Pref_Load; |
| pref_dst_mode = Pref_Store; |
| } else { |
| pref_src_mode = Pref_LoadStreamed; |
| pref_dst_mode = Pref_StoreStreamed; |
| } |
| break; |
| |
| case CPU_LOONGSON3: |
| /* Loongson-3 only support the Pref_Load/Pref_Store. */ |
| pref_bias_clear_store = 128; |
| pref_bias_copy_load = 128; |
| pref_bias_copy_store = 128; |
| pref_src_mode = Pref_Load; |
| pref_dst_mode = Pref_Store; |
| break; |
| |
| default: |
| pref_bias_clear_store = 128; |
| pref_bias_copy_load = 256; |
| pref_bias_copy_store = 128; |
| pref_src_mode = Pref_LoadStreamed; |
| if (cpu_has_mips_r6) |
| /* |
| * Bit 30 (Pref_PrepareForStore) has been |
| * removed from MIPS R6. Use bit 5 |
| * (Pref_StoreStreamed). |
| */ |
| pref_dst_mode = Pref_StoreStreamed; |
| else |
| pref_dst_mode = Pref_PrepareForStore; |
| break; |
| } |
| } else { |
| if (cpu_has_cache_cdex_s) |
| cache_line_size = cpu_scache_line_size(); |
| else if (cpu_has_cache_cdex_p) |
| cache_line_size = cpu_dcache_line_size(); |
| } |
| /* |
| * Too much unrolling will overflow the available space in |
| * clear_space_array / copy_page_array. |
| */ |
| half_clear_loop_size = min(16 * clear_word_size, |
| max(cache_line_size >> 1, |
| 4 * clear_word_size)); |
| half_copy_loop_size = min(16 * copy_word_size, |
| max(cache_line_size >> 1, |
| 4 * copy_word_size)); |
| } |
| |
| static void build_clear_store(u32 **buf, int off) |
| { |
| if (cpu_has_64bit_gp_regs || cpu_has_64bit_zero_reg) { |
| uasm_i_sd(buf, ZERO, off, A0); |
| } else { |
| uasm_i_sw(buf, ZERO, off, A0); |
| } |
| } |
| |
| static inline void build_clear_pref(u32 **buf, int off) |
| { |
| if (off & cache_line_mask()) |
| return; |
| |
| if (pref_bias_clear_store) { |
| _uasm_i_pref(buf, pref_dst_mode, pref_bias_clear_store + off, |
| A0); |
| } else if (cache_line_size == (half_clear_loop_size << 1)) { |
| if (cpu_has_cache_cdex_s) { |
| uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0); |
| } else if (cpu_has_cache_cdex_p) { |
| if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) { |
| uasm_i_nop(buf); |
| uasm_i_nop(buf); |
| uasm_i_nop(buf); |
| uasm_i_nop(buf); |
| } |
| |
| if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) |
| uasm_i_lw(buf, ZERO, ZERO, AT); |
| |
| uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0); |
| } |
| } |
| } |
| |
| extern u32 __clear_page_start; |
| extern u32 __clear_page_end; |
| extern u32 __copy_page_start; |
| extern u32 __copy_page_end; |
| |
| void build_clear_page(void) |
| { |
| int off; |
| u32 *buf = &__clear_page_start; |
| struct uasm_label *l = labels; |
| struct uasm_reloc *r = relocs; |
| int i; |
| static atomic_t run_once = ATOMIC_INIT(0); |
| |
| if (atomic_xchg(&run_once, 1)) { |
| return; |
| } |
| |
| memset(labels, 0, sizeof(labels)); |
| memset(relocs, 0, sizeof(relocs)); |
| |
| set_prefetch_parameters(); |
| |
| /* |
| * This algorithm makes the following assumptions: |
| * - The prefetch bias is a multiple of 2 words. |
| * - The prefetch bias is less than one page. |
| */ |
| BUG_ON(pref_bias_clear_store % (2 * clear_word_size)); |
| BUG_ON(PAGE_SIZE < pref_bias_clear_store); |
| |
| off = PAGE_SIZE - pref_bias_clear_store; |
| if (off > 0xffff || !pref_bias_clear_store) |
| pg_addiu(&buf, A2, A0, off); |
| else |
| uasm_i_ori(&buf, A2, A0, off); |
| |
| if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) |
| uasm_i_lui(&buf, AT, uasm_rel_hi(0xa0000000)); |
| |
| off = cache_line_size ? min(8, pref_bias_clear_store / cache_line_size) |
| * cache_line_size : 0; |
| while (off) { |
| build_clear_pref(&buf, -off); |
| off -= cache_line_size; |
| } |
| uasm_l_clear_pref(&l, buf); |
| do { |
| build_clear_pref(&buf, off); |
| build_clear_store(&buf, off); |
| off += clear_word_size; |
| } while (off < half_clear_loop_size); |
| pg_addiu(&buf, A0, A0, 2 * off); |
| off = -off; |
| do { |
| build_clear_pref(&buf, off); |
| if (off == -clear_word_size) |
| uasm_il_bne(&buf, &r, A0, A2, label_clear_pref); |
| build_clear_store(&buf, off); |
| off += clear_word_size; |
| } while (off < 0); |
| |
| if (pref_bias_clear_store) { |
| pg_addiu(&buf, A2, A0, pref_bias_clear_store); |
| uasm_l_clear_nopref(&l, buf); |
| off = 0; |
| do { |
| build_clear_store(&buf, off); |
| off += clear_word_size; |
| } while (off < half_clear_loop_size); |
| pg_addiu(&buf, A0, A0, 2 * off); |
| off = -off; |
| do { |
| if (off == -clear_word_size) |
| uasm_il_bne(&buf, &r, A0, A2, |
| label_clear_nopref); |
| build_clear_store(&buf, off); |
| off += clear_word_size; |
| } while (off < 0); |
| } |
| |
| uasm_i_jr(&buf, RA); |
| uasm_i_nop(&buf); |
| |
| BUG_ON(buf > &__clear_page_end); |
| |
| uasm_resolve_relocs(relocs, labels); |
| |
| pr_debug("Synthesized clear page handler (%u instructions).\n", |
| (u32)(buf - &__clear_page_start)); |
| |
| pr_debug("\t.set push\n"); |
| pr_debug("\t.set noreorder\n"); |
| for (i = 0; i < (buf - &__clear_page_start); i++) |
| pr_debug("\t.word 0x%08x\n", (&__clear_page_start)[i]); |
| pr_debug("\t.set pop\n"); |
| } |
| |
| static void build_copy_load(u32 **buf, int reg, int off) |
| { |
| if (cpu_has_64bit_gp_regs) { |
| uasm_i_ld(buf, reg, off, A1); |
| } else { |
| uasm_i_lw(buf, reg, off, A1); |
| } |
| } |
| |
| static void build_copy_store(u32 **buf, int reg, int off) |
| { |
| if (cpu_has_64bit_gp_regs) { |
| uasm_i_sd(buf, reg, off, A0); |
| } else { |
| uasm_i_sw(buf, reg, off, A0); |
| } |
| } |
| |
| static inline void build_copy_load_pref(u32 **buf, int off) |
| { |
| if (off & cache_line_mask()) |
| return; |
| |
| if (pref_bias_copy_load) |
| _uasm_i_pref(buf, pref_src_mode, pref_bias_copy_load + off, A1); |
| } |
| |
| static inline void build_copy_store_pref(u32 **buf, int off) |
| { |
| if (off & cache_line_mask()) |
| return; |
| |
| if (pref_bias_copy_store) { |
| _uasm_i_pref(buf, pref_dst_mode, pref_bias_copy_store + off, |
| A0); |
| } else if (cache_line_size == (half_copy_loop_size << 1)) { |
| if (cpu_has_cache_cdex_s) { |
| uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0); |
| } else if (cpu_has_cache_cdex_p) { |
| if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) { |
| uasm_i_nop(buf); |
| uasm_i_nop(buf); |
| uasm_i_nop(buf); |
| uasm_i_nop(buf); |
| } |
| |
| if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) |
| uasm_i_lw(buf, ZERO, ZERO, AT); |
| |
| uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0); |
| } |
| } |
| } |
| |
| void build_copy_page(void) |
| { |
| int off; |
| u32 *buf = &__copy_page_start; |
| struct uasm_label *l = labels; |
| struct uasm_reloc *r = relocs; |
| int i; |
| static atomic_t run_once = ATOMIC_INIT(0); |
| |
| if (atomic_xchg(&run_once, 1)) { |
| return; |
| } |
| |
| memset(labels, 0, sizeof(labels)); |
| memset(relocs, 0, sizeof(relocs)); |
| |
| set_prefetch_parameters(); |
| |
| /* |
| * This algorithm makes the following assumptions: |
| * - All prefetch biases are multiples of 8 words. |
| * - The prefetch biases are less than one page. |
| * - The store prefetch bias isn't greater than the load |
| * prefetch bias. |
| */ |
| BUG_ON(pref_bias_copy_load % (8 * copy_word_size)); |
| BUG_ON(pref_bias_copy_store % (8 * copy_word_size)); |
| BUG_ON(PAGE_SIZE < pref_bias_copy_load); |
| BUG_ON(pref_bias_copy_store > pref_bias_copy_load); |
| |
| off = PAGE_SIZE - pref_bias_copy_load; |
| if (off > 0xffff || !pref_bias_copy_load) |
| pg_addiu(&buf, A2, A0, off); |
| else |
| uasm_i_ori(&buf, A2, A0, off); |
| |
| if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) |
| uasm_i_lui(&buf, AT, uasm_rel_hi(0xa0000000)); |
| |
| off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) * |
| cache_line_size : 0; |
| while (off) { |
| build_copy_load_pref(&buf, -off); |
| off -= cache_line_size; |
| } |
| off = cache_line_size ? min(8, pref_bias_copy_store / cache_line_size) * |
| cache_line_size : 0; |
| while (off) { |
| build_copy_store_pref(&buf, -off); |
| off -= cache_line_size; |
| } |
| uasm_l_copy_pref_both(&l, buf); |
| do { |
| build_copy_load_pref(&buf, off); |
| build_copy_load(&buf, T0, off); |
| build_copy_load_pref(&buf, off + copy_word_size); |
| build_copy_load(&buf, T1, off + copy_word_size); |
| build_copy_load_pref(&buf, off + 2 * copy_word_size); |
| build_copy_load(&buf, T2, off + 2 * copy_word_size); |
| build_copy_load_pref(&buf, off + 3 * copy_word_size); |
| build_copy_load(&buf, T3, off + 3 * copy_word_size); |
| build_copy_store_pref(&buf, off); |
| build_copy_store(&buf, T0, off); |
| build_copy_store_pref(&buf, off + copy_word_size); |
| build_copy_store(&buf, T1, off + copy_word_size); |
| build_copy_store_pref(&buf, off + 2 * copy_word_size); |
| build_copy_store(&buf, T2, off + 2 * copy_word_size); |
| build_copy_store_pref(&buf, off + 3 * copy_word_size); |
| build_copy_store(&buf, T3, off + 3 * copy_word_size); |
| off += 4 * copy_word_size; |
| } while (off < half_copy_loop_size); |
| pg_addiu(&buf, A1, A1, 2 * off); |
| pg_addiu(&buf, A0, A0, 2 * off); |
| off = -off; |
| do { |
| build_copy_load_pref(&buf, off); |
| build_copy_load(&buf, T0, off); |
| build_copy_load_pref(&buf, off + copy_word_size); |
| build_copy_load(&buf, T1, off + copy_word_size); |
| build_copy_load_pref(&buf, off + 2 * copy_word_size); |
| build_copy_load(&buf, T2, off + 2 * copy_word_size); |
| build_copy_load_pref(&buf, off + 3 * copy_word_size); |
| build_copy_load(&buf, T3, off + 3 * copy_word_size); |
| build_copy_store_pref(&buf, off); |
| build_copy_store(&buf, T0, off); |
| build_copy_store_pref(&buf, off + copy_word_size); |
| build_copy_store(&buf, T1, off + copy_word_size); |
| build_copy_store_pref(&buf, off + 2 * copy_word_size); |
| build_copy_store(&buf, T2, off + 2 * copy_word_size); |
| build_copy_store_pref(&buf, off + 3 * copy_word_size); |
| if (off == -(4 * copy_word_size)) |
| uasm_il_bne(&buf, &r, A2, A0, label_copy_pref_both); |
| build_copy_store(&buf, T3, off + 3 * copy_word_size); |
| off += 4 * copy_word_size; |
| } while (off < 0); |
| |
| if (pref_bias_copy_load - pref_bias_copy_store) { |
| pg_addiu(&buf, A2, A0, |
| pref_bias_copy_load - pref_bias_copy_store); |
| uasm_l_copy_pref_store(&l, buf); |
| off = 0; |
| do { |
| build_copy_load(&buf, T0, off); |
| build_copy_load(&buf, T1, off + copy_word_size); |
| build_copy_load(&buf, T2, off + 2 * copy_word_size); |
| build_copy_load(&buf, T3, off + 3 * copy_word_size); |
| build_copy_store_pref(&buf, off); |
| build_copy_store(&buf, T0, off); |
| build_copy_store_pref(&buf, off + copy_word_size); |
| build_copy_store(&buf, T1, off + copy_word_size); |
| build_copy_store_pref(&buf, off + 2 * copy_word_size); |
| build_copy_store(&buf, T2, off + 2 * copy_word_size); |
| build_copy_store_pref(&buf, off + 3 * copy_word_size); |
| build_copy_store(&buf, T3, off + 3 * copy_word_size); |
| off += 4 * copy_word_size; |
| } while (off < half_copy_loop_size); |
| pg_addiu(&buf, A1, A1, 2 * off); |
| pg_addiu(&buf, A0, A0, 2 * off); |
| off = -off; |
| do { |
| build_copy_load(&buf, T0, off); |
| build_copy_load(&buf, T1, off + copy_word_size); |
| build_copy_load(&buf, T2, off + 2 * copy_word_size); |
| build_copy_load(&buf, T3, off + 3 * copy_word_size); |
| build_copy_store_pref(&buf, off); |
| build_copy_store(&buf, T0, off); |
| build_copy_store_pref(&buf, off + copy_word_size); |
| build_copy_store(&buf, T1, off + copy_word_size); |
| build_copy_store_pref(&buf, off + 2 * copy_word_size); |
| build_copy_store(&buf, T2, off + 2 * copy_word_size); |
| build_copy_store_pref(&buf, off + 3 * copy_word_size); |
| if (off == -(4 * copy_word_size)) |
| uasm_il_bne(&buf, &r, A2, A0, |
| label_copy_pref_store); |
| build_copy_store(&buf, T3, off + 3 * copy_word_size); |
| off += 4 * copy_word_size; |
| } while (off < 0); |
| } |
| |
| if (pref_bias_copy_store) { |
| pg_addiu(&buf, A2, A0, pref_bias_copy_store); |
| uasm_l_copy_nopref(&l, buf); |
| off = 0; |
| do { |
| build_copy_load(&buf, T0, off); |
| build_copy_load(&buf, T1, off + copy_word_size); |
| build_copy_load(&buf, T2, off + 2 * copy_word_size); |
| build_copy_load(&buf, T3, off + 3 * copy_word_size); |
| build_copy_store(&buf, T0, off); |
| build_copy_store(&buf, T1, off + copy_word_size); |
| build_copy_store(&buf, T2, off + 2 * copy_word_size); |
| build_copy_store(&buf, T3, off + 3 * copy_word_size); |
| off += 4 * copy_word_size; |
| } while (off < half_copy_loop_size); |
| pg_addiu(&buf, A1, A1, 2 * off); |
| pg_addiu(&buf, A0, A0, 2 * off); |
| off = -off; |
| do { |
| build_copy_load(&buf, T0, off); |
| build_copy_load(&buf, T1, off + copy_word_size); |
| build_copy_load(&buf, T2, off + 2 * copy_word_size); |
| build_copy_load(&buf, T3, off + 3 * copy_word_size); |
| build_copy_store(&buf, T0, off); |
| build_copy_store(&buf, T1, off + copy_word_size); |
| build_copy_store(&buf, T2, off + 2 * copy_word_size); |
| if (off == -(4 * copy_word_size)) |
| uasm_il_bne(&buf, &r, A2, A0, |
| label_copy_nopref); |
| build_copy_store(&buf, T3, off + 3 * copy_word_size); |
| off += 4 * copy_word_size; |
| } while (off < 0); |
| } |
| |
| uasm_i_jr(&buf, RA); |
| uasm_i_nop(&buf); |
| |
| BUG_ON(buf > &__copy_page_end); |
| |
| uasm_resolve_relocs(relocs, labels); |
| |
| pr_debug("Synthesized copy page handler (%u instructions).\n", |
| (u32)(buf - &__copy_page_start)); |
| |
| pr_debug("\t.set push\n"); |
| pr_debug("\t.set noreorder\n"); |
| for (i = 0; i < (buf - &__copy_page_start); i++) |
| pr_debug("\t.word 0x%08x\n", (&__copy_page_start)[i]); |
| pr_debug("\t.set pop\n"); |
| } |
| |
| #ifdef CONFIG_SIBYTE_DMA_PAGEOPS |
| extern void clear_page_cpu(void *page); |
| extern void copy_page_cpu(void *to, void *from); |
| |
| /* |
| * Pad descriptors to cacheline, since each is exclusively owned by a |
| * particular CPU. |
| */ |
| struct dmadscr { |
| u64 dscr_a; |
| u64 dscr_b; |
| u64 pad_a; |
| u64 pad_b; |
| } ____cacheline_aligned_in_smp page_descr[DM_NUM_CHANNELS]; |
| |
| void sb1_dma_init(void) |
| { |
| int i; |
| |
| for (i = 0; i < DM_NUM_CHANNELS; i++) { |
| const u64 base_val = CPHYSADDR((unsigned long)&page_descr[i]) | |
| V_DM_DSCR_BASE_RINGSZ(1); |
| void *base_reg = IOADDR(A_DM_REGISTER(i, R_DM_DSCR_BASE)); |
| |
| __raw_writeq(base_val, base_reg); |
| __raw_writeq(base_val | M_DM_DSCR_BASE_RESET, base_reg); |
| __raw_writeq(base_val | M_DM_DSCR_BASE_ENABL, base_reg); |
| } |
| } |
| |
| void clear_page(void *page) |
| { |
| u64 to_phys = CPHYSADDR((unsigned long)page); |
| unsigned int cpu = smp_processor_id(); |
| |
| /* if the page is not in KSEG0, use old way */ |
| if ((long)KSEGX((unsigned long)page) != (long)CKSEG0) |
| return clear_page_cpu(page); |
| |
| page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_ZERO_MEM | |
| M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT; |
| page_descr[cpu].dscr_b = V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE); |
| __raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT))); |
| |
| /* |
| * Don't really want to do it this way, but there's no |
| * reliable way to delay completion detection. |
| */ |
| while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG))) |
| & M_DM_DSCR_BASE_INTERRUPT)) |
| ; |
| __raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); |
| } |
| |
| void copy_page(void *to, void *from) |
| { |
| u64 from_phys = CPHYSADDR((unsigned long)from); |
| u64 to_phys = CPHYSADDR((unsigned long)to); |
| unsigned int cpu = smp_processor_id(); |
| |
| /* if any page is not in KSEG0, use old way */ |
| if ((long)KSEGX((unsigned long)to) != (long)CKSEG0 |
| || (long)KSEGX((unsigned long)from) != (long)CKSEG0) |
| return copy_page_cpu(to, from); |
| |
| page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_L2C_DEST | |
| M_DM_DSCRA_INTERRUPT; |
| page_descr[cpu].dscr_b = from_phys | V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE); |
| __raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT))); |
| |
| /* |
| * Don't really want to do it this way, but there's no |
| * reliable way to delay completion detection. |
| */ |
| while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG))) |
| & M_DM_DSCR_BASE_INTERRUPT)) |
| ; |
| __raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); |
| } |
| |
| #endif /* CONFIG_SIBYTE_DMA_PAGEOPS */ |