| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2004-2008 Cavium Networks |
| */ |
| #ifndef __ASM_OCTEON_OCTEON_H |
| #define __ASM_OCTEON_OCTEON_H |
| |
| #include <asm/octeon/cvmx.h> |
| #include <asm/bitfield.h> |
| |
| extern uint64_t octeon_bootmem_alloc_range_phys(uint64_t size, |
| uint64_t alignment, |
| uint64_t min_addr, |
| uint64_t max_addr, |
| int do_locking); |
| extern void *octeon_bootmem_alloc(uint64_t size, uint64_t alignment, |
| int do_locking); |
| extern void *octeon_bootmem_alloc_range(uint64_t size, uint64_t alignment, |
| uint64_t min_addr, uint64_t max_addr, |
| int do_locking); |
| extern void *octeon_bootmem_alloc_named(uint64_t size, uint64_t alignment, |
| char *name); |
| extern void *octeon_bootmem_alloc_named_range(uint64_t size, uint64_t min_addr, |
| uint64_t max_addr, uint64_t align, |
| char *name); |
| extern void *octeon_bootmem_alloc_named_address(uint64_t size, uint64_t address, |
| char *name); |
| extern int octeon_bootmem_free_named(char *name); |
| extern void octeon_bootmem_lock(void); |
| extern void octeon_bootmem_unlock(void); |
| |
| extern int octeon_is_simulation(void); |
| extern int octeon_is_pci_host(void); |
| extern int octeon_usb_is_ref_clk(void); |
| extern uint64_t octeon_get_clock_rate(void); |
| extern u64 octeon_get_io_clock_rate(void); |
| extern const char *octeon_board_type_string(void); |
| extern const char *octeon_get_pci_interrupts(void); |
| extern int octeon_get_southbridge_interrupt(void); |
| extern int octeon_get_boot_coremask(void); |
| extern int octeon_get_boot_num_arguments(void); |
| extern const char *octeon_get_boot_argument(int arg); |
| extern void octeon_hal_setup_reserved32(void); |
| extern void octeon_user_io_init(void); |
| |
| extern void octeon_init_cvmcount(void); |
| extern void octeon_setup_delays(void); |
| extern void octeon_io_clk_delay(unsigned long); |
| |
| #define OCTEON_ARGV_MAX_ARGS 64 |
| #define OCTOEN_SERIAL_LEN 20 |
| |
| struct octeon_boot_descriptor { |
| #ifdef __BIG_ENDIAN_BITFIELD |
| /* Start of block referenced by assembly code - do not change! */ |
| uint32_t desc_version; |
| uint32_t desc_size; |
| uint64_t stack_top; |
| uint64_t heap_base; |
| uint64_t heap_end; |
| /* Only used by bootloader */ |
| uint64_t entry_point; |
| uint64_t desc_vaddr; |
| /* End of This block referenced by assembly code - do not change! */ |
| uint32_t exception_base_addr; |
| uint32_t stack_size; |
| uint32_t heap_size; |
| /* Argc count for application. */ |
| uint32_t argc; |
| uint32_t argv[OCTEON_ARGV_MAX_ARGS]; |
| |
| #define BOOT_FLAG_INIT_CORE (1 << 0) |
| #define OCTEON_BL_FLAG_DEBUG (1 << 1) |
| #define OCTEON_BL_FLAG_NO_MAGIC (1 << 2) |
| /* If set, use uart1 for console */ |
| #define OCTEON_BL_FLAG_CONSOLE_UART1 (1 << 3) |
| /* If set, use PCI console */ |
| #define OCTEON_BL_FLAG_CONSOLE_PCI (1 << 4) |
| /* Call exit on break on serial port */ |
| #define OCTEON_BL_FLAG_BREAK (1 << 5) |
| |
| uint32_t flags; |
| uint32_t core_mask; |
| /* DRAM size in megabyes. */ |
| uint32_t dram_size; |
| /* physical address of free memory descriptor block. */ |
| uint32_t phy_mem_desc_addr; |
| /* used to pass flags from app to debugger. */ |
| uint32_t debugger_flags_base_addr; |
| /* CPU clock speed, in hz. */ |
| uint32_t eclock_hz; |
| /* DRAM clock speed, in hz. */ |
| uint32_t dclock_hz; |
| /* SPI4 clock in hz. */ |
| uint32_t spi_clock_hz; |
| uint16_t board_type; |
| uint8_t board_rev_major; |
| uint8_t board_rev_minor; |
| uint16_t chip_type; |
| uint8_t chip_rev_major; |
| uint8_t chip_rev_minor; |
| char board_serial_number[OCTOEN_SERIAL_LEN]; |
| uint8_t mac_addr_base[6]; |
| uint8_t mac_addr_count; |
| uint64_t cvmx_desc_vaddr; |
| #else |
| uint32_t desc_size; |
| uint32_t desc_version; |
| uint64_t stack_top; |
| uint64_t heap_base; |
| uint64_t heap_end; |
| /* Only used by bootloader */ |
| uint64_t entry_point; |
| uint64_t desc_vaddr; |
| /* End of This block referenced by assembly code - do not change! */ |
| uint32_t stack_size; |
| uint32_t exception_base_addr; |
| uint32_t argc; |
| uint32_t heap_size; |
| /* |
| * Argc count for application. |
| * Warning low bit scrambled in little-endian. |
| */ |
| uint32_t argv[OCTEON_ARGV_MAX_ARGS]; |
| |
| #define BOOT_FLAG_INIT_CORE (1 << 0) |
| #define OCTEON_BL_FLAG_DEBUG (1 << 1) |
| #define OCTEON_BL_FLAG_NO_MAGIC (1 << 2) |
| /* If set, use uart1 for console */ |
| #define OCTEON_BL_FLAG_CONSOLE_UART1 (1 << 3) |
| /* If set, use PCI console */ |
| #define OCTEON_BL_FLAG_CONSOLE_PCI (1 << 4) |
| /* Call exit on break on serial port */ |
| #define OCTEON_BL_FLAG_BREAK (1 << 5) |
| |
| uint32_t core_mask; |
| uint32_t flags; |
| /* physical address of free memory descriptor block. */ |
| uint32_t phy_mem_desc_addr; |
| /* DRAM size in megabyes. */ |
| uint32_t dram_size; |
| /* CPU clock speed, in hz. */ |
| uint32_t eclock_hz; |
| /* used to pass flags from app to debugger. */ |
| uint32_t debugger_flags_base_addr; |
| /* SPI4 clock in hz. */ |
| uint32_t spi_clock_hz; |
| /* DRAM clock speed, in hz. */ |
| uint32_t dclock_hz; |
| uint8_t chip_rev_minor; |
| uint8_t chip_rev_major; |
| uint16_t chip_type; |
| uint8_t board_rev_minor; |
| uint8_t board_rev_major; |
| uint16_t board_type; |
| |
| uint64_t unused1[4]; /* Not even filled in by bootloader. */ |
| |
| uint64_t cvmx_desc_vaddr; |
| #endif |
| }; |
| |
| union octeon_cvmemctl { |
| uint64_t u64; |
| struct { |
| /* RO 1 = BIST fail, 0 = BIST pass */ |
| __BITFIELD_FIELD(uint64_t tlbbist:1, |
| /* RO 1 = BIST fail, 0 = BIST pass */ |
| __BITFIELD_FIELD(uint64_t l1cbist:1, |
| /* RO 1 = BIST fail, 0 = BIST pass */ |
| __BITFIELD_FIELD(uint64_t l1dbist:1, |
| /* RO 1 = BIST fail, 0 = BIST pass */ |
| __BITFIELD_FIELD(uint64_t dcmbist:1, |
| /* RO 1 = BIST fail, 0 = BIST pass */ |
| __BITFIELD_FIELD(uint64_t ptgbist:1, |
| /* RO 1 = BIST fail, 0 = BIST pass */ |
| __BITFIELD_FIELD(uint64_t wbfbist:1, |
| /* Reserved */ |
| __BITFIELD_FIELD(uint64_t reserved:17, |
| /* OCTEON II - TLB replacement policy: 0 = bitmask LRU; 1 = NLU. |
| * This field selects between the TLB replacement policies: |
| * bitmask LRU or NLU. Bitmask LRU maintains a mask of |
| * recently used TLB entries and avoids them as new entries |
| * are allocated. NLU simply guarantees that the next |
| * allocation is not the last used TLB entry. */ |
| __BITFIELD_FIELD(uint64_t tlbnlu:1, |
| /* OCTEON II - Selects the bit in the counter used for |
| * releasing a PAUSE. This counter trips every 2(8+PAUSETIME) |
| * cycles. If not already released, the cnMIPS II core will |
| * always release a given PAUSE instruction within |
| * 2(8+PAUSETIME). If the counter trip happens to line up, |
| * the cnMIPS II core may release the PAUSE instantly. */ |
| __BITFIELD_FIELD(uint64_t pausetime:3, |
| /* OCTEON II - This field is an extension of |
| * CvmMemCtl[DIDTTO] */ |
| __BITFIELD_FIELD(uint64_t didtto2:1, |
| /* R/W If set, marked write-buffer entries time out |
| * the same as as other entries; if clear, marked |
| * write-buffer entries use the maximum timeout. */ |
| __BITFIELD_FIELD(uint64_t dismarkwblongto:1, |
| /* R/W If set, a merged store does not clear the |
| * write-buffer entry timeout state. */ |
| __BITFIELD_FIELD(uint64_t dismrgclrwbto:1, |
| /* R/W Two bits that are the MSBs of the resultant |
| * CVMSEG LM word location for an IOBDMA. The other 8 |
| * bits come from the SCRADDR field of the IOBDMA. */ |
| __BITFIELD_FIELD(uint64_t iobdmascrmsb:2, |
| /* R/W If set, SYNCWS and SYNCS only order marked |
| * stores; if clear, SYNCWS and SYNCS only order |
| * unmarked stores. SYNCWSMARKED has no effect when |
| * DISSYNCWS is set. */ |
| __BITFIELD_FIELD(uint64_t syncwsmarked:1, |
| /* R/W If set, SYNCWS acts as SYNCW and SYNCS acts as |
| * SYNC. */ |
| __BITFIELD_FIELD(uint64_t dissyncws:1, |
| /* R/W If set, no stall happens on write buffer |
| * full. */ |
| __BITFIELD_FIELD(uint64_t diswbfst:1, |
| /* R/W If set (and SX set), supervisor-level |
| * loads/stores can use XKPHYS addresses with |
| * VA<48>==0 */ |
| __BITFIELD_FIELD(uint64_t xkmemenas:1, |
| /* R/W If set (and UX set), user-level loads/stores |
| * can use XKPHYS addresses with VA<48>==0 */ |
| __BITFIELD_FIELD(uint64_t xkmemenau:1, |
| /* R/W If set (and SX set), supervisor-level |
| * loads/stores can use XKPHYS addresses with |
| * VA<48>==1 */ |
| __BITFIELD_FIELD(uint64_t xkioenas:1, |
| /* R/W If set (and UX set), user-level loads/stores |
| * can use XKPHYS addresses with VA<48>==1 */ |
| __BITFIELD_FIELD(uint64_t xkioenau:1, |
| /* R/W If set, all stores act as SYNCW (NOMERGE must |
| * be set when this is set) RW, reset to 0. */ |
| __BITFIELD_FIELD(uint64_t allsyncw:1, |
| /* R/W If set, no stores merge, and all stores reach |
| * the coherent bus in order. */ |
| __BITFIELD_FIELD(uint64_t nomerge:1, |
| /* R/W Selects the bit in the counter used for DID |
| * time-outs 0 = 231, 1 = 230, 2 = 229, 3 = |
| * 214. Actual time-out is between 1x and 2x this |
| * interval. For example, with DIDTTO=3, expiration |
| * interval is between 16K and 32K. */ |
| __BITFIELD_FIELD(uint64_t didtto:2, |
| /* R/W If set, the (mem) CSR clock never turns off. */ |
| __BITFIELD_FIELD(uint64_t csrckalwys:1, |
| /* R/W If set, mclk never turns off. */ |
| __BITFIELD_FIELD(uint64_t mclkalwys:1, |
| /* R/W Selects the bit in the counter used for write |
| * buffer flush time-outs (WBFLT+11) is the bit |
| * position in an internal counter used to determine |
| * expiration. The write buffer expires between 1x and |
| * 2x this interval. For example, with WBFLT = 0, a |
| * write buffer expires between 2K and 4K cycles after |
| * the write buffer entry is allocated. */ |
| __BITFIELD_FIELD(uint64_t wbfltime:3, |
| /* R/W If set, do not put Istream in the L2 cache. */ |
| __BITFIELD_FIELD(uint64_t istrnol2:1, |
| /* R/W The write buffer threshold. */ |
| __BITFIELD_FIELD(uint64_t wbthresh:4, |
| /* Reserved */ |
| __BITFIELD_FIELD(uint64_t reserved2:2, |
| /* R/W If set, CVMSEG is available for loads/stores in |
| * kernel/debug mode. */ |
| __BITFIELD_FIELD(uint64_t cvmsegenak:1, |
| /* R/W If set, CVMSEG is available for loads/stores in |
| * supervisor mode. */ |
| __BITFIELD_FIELD(uint64_t cvmsegenas:1, |
| /* R/W If set, CVMSEG is available for loads/stores in |
| * user mode. */ |
| __BITFIELD_FIELD(uint64_t cvmsegenau:1, |
| /* R/W Size of local memory in cache blocks, 54 (6912 |
| * bytes) is max legal value. */ |
| __BITFIELD_FIELD(uint64_t lmemsz:6, |
| ;))))))))))))))))))))))))))))))))) |
| } s; |
| }; |
| |
| extern void octeon_write_lcd(const char *s); |
| extern void octeon_check_cpu_bist(void); |
| extern int octeon_get_boot_uart(void); |
| |
| struct uart_port; |
| extern unsigned int octeon_serial_in(struct uart_port *, int); |
| extern void octeon_serial_out(struct uart_port *, int, int); |
| |
| /** |
| * Write a 32bit value to the Octeon NPI register space |
| * |
| * @address: Address to write to |
| * @val: Value to write |
| */ |
| static inline void octeon_npi_write32(uint64_t address, uint32_t val) |
| { |
| cvmx_write64_uint32(address ^ 4, val); |
| cvmx_read64_uint32(address ^ 4); |
| } |
| |
| #ifdef CONFIG_SMP |
| void octeon_setup_smp(void); |
| #else |
| static inline void octeon_setup_smp(void) {} |
| #endif |
| |
| struct irq_domain; |
| struct device_node; |
| struct irq_data; |
| struct irq_chip; |
| void octeon_ciu3_mbox_send(int cpu, unsigned int mbox); |
| int octeon_irq_ciu3_xlat(struct irq_domain *d, |
| struct device_node *node, |
| const u32 *intspec, |
| unsigned int intsize, |
| unsigned long *out_hwirq, |
| unsigned int *out_type); |
| void octeon_irq_ciu3_enable(struct irq_data *data); |
| void octeon_irq_ciu3_disable(struct irq_data *data); |
| void octeon_irq_ciu3_ack(struct irq_data *data); |
| void octeon_irq_ciu3_mask(struct irq_data *data); |
| void octeon_irq_ciu3_mask_ack(struct irq_data *data); |
| int octeon_irq_ciu3_mapx(struct irq_domain *d, unsigned int virq, |
| irq_hw_number_t hw, struct irq_chip *chip); |
| |
| /* Octeon multiplier save/restore routines from octeon_switch.S */ |
| void octeon_mult_save(void); |
| void octeon_mult_restore(void); |
| void octeon_mult_save_end(void); |
| void octeon_mult_restore_end(void); |
| void octeon_mult_save3(void); |
| void octeon_mult_save3_end(void); |
| void octeon_mult_save2(void); |
| void octeon_mult_save2_end(void); |
| void octeon_mult_restore3(void); |
| void octeon_mult_restore3_end(void); |
| void octeon_mult_restore2(void); |
| void octeon_mult_restore2_end(void); |
| |
| /** |
| * Read a 32bit value from the Octeon NPI register space |
| * |
| * @address: Address to read |
| * Returns The result |
| */ |
| static inline uint32_t octeon_npi_read32(uint64_t address) |
| { |
| return cvmx_read64_uint32(address ^ 4); |
| } |
| |
| extern struct cvmx_bootinfo *octeon_bootinfo; |
| |
| extern uint64_t octeon_bootloader_entry_addr; |
| |
| extern void (*octeon_irq_setup_secondary)(void); |
| |
| typedef void (*octeon_irq_ip4_handler_t)(void); |
| void octeon_irq_set_ip4_handler(octeon_irq_ip4_handler_t); |
| |
| extern void octeon_fixup_irqs(void); |
| |
| extern struct semaphore octeon_bootbus_sem; |
| |
| #endif /* __ASM_OCTEON_OCTEON_H */ |