| /* |
| * linux/drivers/video/omap2/dss/rfbi.c |
| * |
| * Copyright (C) 2009 Nokia Corporation |
| * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> |
| * |
| * Some code and ideas taken from drivers/video/omap/ driver |
| * by Imre Deak. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #define DSS_SUBSYS_NAME "RFBI" |
| |
| #include <linux/kernel.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/export.h> |
| #include <linux/vmalloc.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <linux/kfifo.h> |
| #include <linux/ktime.h> |
| #include <linux/hrtimer.h> |
| #include <linux/seq_file.h> |
| #include <linux/semaphore.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/component.h> |
| |
| #include <video/omapdss.h> |
| #include "dss.h" |
| |
| struct rfbi_reg { u16 idx; }; |
| |
| #define RFBI_REG(idx) ((const struct rfbi_reg) { idx }) |
| |
| #define RFBI_REVISION RFBI_REG(0x0000) |
| #define RFBI_SYSCONFIG RFBI_REG(0x0010) |
| #define RFBI_SYSSTATUS RFBI_REG(0x0014) |
| #define RFBI_CONTROL RFBI_REG(0x0040) |
| #define RFBI_PIXEL_CNT RFBI_REG(0x0044) |
| #define RFBI_LINE_NUMBER RFBI_REG(0x0048) |
| #define RFBI_CMD RFBI_REG(0x004c) |
| #define RFBI_PARAM RFBI_REG(0x0050) |
| #define RFBI_DATA RFBI_REG(0x0054) |
| #define RFBI_READ RFBI_REG(0x0058) |
| #define RFBI_STATUS RFBI_REG(0x005c) |
| |
| #define RFBI_CONFIG(n) RFBI_REG(0x0060 + (n)*0x18) |
| #define RFBI_ONOFF_TIME(n) RFBI_REG(0x0064 + (n)*0x18) |
| #define RFBI_CYCLE_TIME(n) RFBI_REG(0x0068 + (n)*0x18) |
| #define RFBI_DATA_CYCLE1(n) RFBI_REG(0x006c + (n)*0x18) |
| #define RFBI_DATA_CYCLE2(n) RFBI_REG(0x0070 + (n)*0x18) |
| #define RFBI_DATA_CYCLE3(n) RFBI_REG(0x0074 + (n)*0x18) |
| |
| #define RFBI_VSYNC_WIDTH RFBI_REG(0x0090) |
| #define RFBI_HSYNC_WIDTH RFBI_REG(0x0094) |
| |
| #define REG_FLD_MOD(idx, val, start, end) \ |
| rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end)) |
| |
| enum omap_rfbi_cycleformat { |
| OMAP_DSS_RFBI_CYCLEFORMAT_1_1 = 0, |
| OMAP_DSS_RFBI_CYCLEFORMAT_2_1 = 1, |
| OMAP_DSS_RFBI_CYCLEFORMAT_3_1 = 2, |
| OMAP_DSS_RFBI_CYCLEFORMAT_3_2 = 3, |
| }; |
| |
| enum omap_rfbi_datatype { |
| OMAP_DSS_RFBI_DATATYPE_12 = 0, |
| OMAP_DSS_RFBI_DATATYPE_16 = 1, |
| OMAP_DSS_RFBI_DATATYPE_18 = 2, |
| OMAP_DSS_RFBI_DATATYPE_24 = 3, |
| }; |
| |
| enum omap_rfbi_parallelmode { |
| OMAP_DSS_RFBI_PARALLELMODE_8 = 0, |
| OMAP_DSS_RFBI_PARALLELMODE_9 = 1, |
| OMAP_DSS_RFBI_PARALLELMODE_12 = 2, |
| OMAP_DSS_RFBI_PARALLELMODE_16 = 3, |
| }; |
| |
| static int rfbi_convert_timings(struct rfbi_timings *t); |
| static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div); |
| |
| static struct { |
| struct platform_device *pdev; |
| void __iomem *base; |
| |
| unsigned long l4_khz; |
| |
| enum omap_rfbi_datatype datatype; |
| enum omap_rfbi_parallelmode parallelmode; |
| |
| enum omap_rfbi_te_mode te_mode; |
| int te_enabled; |
| |
| void (*framedone_callback)(void *data); |
| void *framedone_callback_data; |
| |
| struct omap_dss_device *dssdev[2]; |
| |
| struct semaphore bus_lock; |
| |
| struct omap_video_timings timings; |
| int pixel_size; |
| int data_lines; |
| struct rfbi_timings intf_timings; |
| |
| struct omap_dss_device output; |
| } rfbi; |
| |
| static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val) |
| { |
| __raw_writel(val, rfbi.base + idx.idx); |
| } |
| |
| static inline u32 rfbi_read_reg(const struct rfbi_reg idx) |
| { |
| return __raw_readl(rfbi.base + idx.idx); |
| } |
| |
| static int rfbi_runtime_get(void) |
| { |
| int r; |
| |
| DSSDBG("rfbi_runtime_get\n"); |
| |
| r = pm_runtime_get_sync(&rfbi.pdev->dev); |
| WARN_ON(r < 0); |
| return r < 0 ? r : 0; |
| } |
| |
| static void rfbi_runtime_put(void) |
| { |
| int r; |
| |
| DSSDBG("rfbi_runtime_put\n"); |
| |
| r = pm_runtime_put_sync(&rfbi.pdev->dev); |
| WARN_ON(r < 0 && r != -ENOSYS); |
| } |
| |
| static void rfbi_bus_lock(void) |
| { |
| down(&rfbi.bus_lock); |
| } |
| |
| static void rfbi_bus_unlock(void) |
| { |
| up(&rfbi.bus_lock); |
| } |
| |
| static void rfbi_write_command(const void *buf, u32 len) |
| { |
| switch (rfbi.parallelmode) { |
| case OMAP_DSS_RFBI_PARALLELMODE_8: |
| { |
| const u8 *b = buf; |
| for (; len; len--) |
| rfbi_write_reg(RFBI_CMD, *b++); |
| break; |
| } |
| |
| case OMAP_DSS_RFBI_PARALLELMODE_16: |
| { |
| const u16 *w = buf; |
| BUG_ON(len & 1); |
| for (; len; len -= 2) |
| rfbi_write_reg(RFBI_CMD, *w++); |
| break; |
| } |
| |
| case OMAP_DSS_RFBI_PARALLELMODE_9: |
| case OMAP_DSS_RFBI_PARALLELMODE_12: |
| default: |
| BUG(); |
| } |
| } |
| |
| static void rfbi_read_data(void *buf, u32 len) |
| { |
| switch (rfbi.parallelmode) { |
| case OMAP_DSS_RFBI_PARALLELMODE_8: |
| { |
| u8 *b = buf; |
| for (; len; len--) { |
| rfbi_write_reg(RFBI_READ, 0); |
| *b++ = rfbi_read_reg(RFBI_READ); |
| } |
| break; |
| } |
| |
| case OMAP_DSS_RFBI_PARALLELMODE_16: |
| { |
| u16 *w = buf; |
| BUG_ON(len & ~1); |
| for (; len; len -= 2) { |
| rfbi_write_reg(RFBI_READ, 0); |
| *w++ = rfbi_read_reg(RFBI_READ); |
| } |
| break; |
| } |
| |
| case OMAP_DSS_RFBI_PARALLELMODE_9: |
| case OMAP_DSS_RFBI_PARALLELMODE_12: |
| default: |
| BUG(); |
| } |
| } |
| |
| static void rfbi_write_data(const void *buf, u32 len) |
| { |
| switch (rfbi.parallelmode) { |
| case OMAP_DSS_RFBI_PARALLELMODE_8: |
| { |
| const u8 *b = buf; |
| for (; len; len--) |
| rfbi_write_reg(RFBI_PARAM, *b++); |
| break; |
| } |
| |
| case OMAP_DSS_RFBI_PARALLELMODE_16: |
| { |
| const u16 *w = buf; |
| BUG_ON(len & 1); |
| for (; len; len -= 2) |
| rfbi_write_reg(RFBI_PARAM, *w++); |
| break; |
| } |
| |
| case OMAP_DSS_RFBI_PARALLELMODE_9: |
| case OMAP_DSS_RFBI_PARALLELMODE_12: |
| default: |
| BUG(); |
| |
| } |
| } |
| |
| static void rfbi_write_pixels(const void __iomem *buf, int scr_width, |
| u16 x, u16 y, |
| u16 w, u16 h) |
| { |
| int start_offset = scr_width * y + x; |
| int horiz_offset = scr_width - w; |
| int i; |
| |
| if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && |
| rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { |
| const u16 __iomem *pd = buf; |
| pd += start_offset; |
| |
| for (; h; --h) { |
| for (i = 0; i < w; ++i) { |
| const u8 __iomem *b = (const u8 __iomem *)pd; |
| rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1)); |
| rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0)); |
| ++pd; |
| } |
| pd += horiz_offset; |
| } |
| } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_24 && |
| rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { |
| const u32 __iomem *pd = buf; |
| pd += start_offset; |
| |
| for (; h; --h) { |
| for (i = 0; i < w; ++i) { |
| const u8 __iomem *b = (const u8 __iomem *)pd; |
| rfbi_write_reg(RFBI_PARAM, __raw_readb(b+2)); |
| rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1)); |
| rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0)); |
| ++pd; |
| } |
| pd += horiz_offset; |
| } |
| } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && |
| rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_16) { |
| const u16 __iomem *pd = buf; |
| pd += start_offset; |
| |
| for (; h; --h) { |
| for (i = 0; i < w; ++i) { |
| rfbi_write_reg(RFBI_PARAM, __raw_readw(pd)); |
| ++pd; |
| } |
| pd += horiz_offset; |
| } |
| } else { |
| BUG(); |
| } |
| } |
| |
| static int rfbi_transfer_area(struct omap_dss_device *dssdev, |
| void (*callback)(void *data), void *data) |
| { |
| u32 l; |
| int r; |
| struct omap_overlay_manager *mgr = rfbi.output.manager; |
| u16 width = rfbi.timings.x_res; |
| u16 height = rfbi.timings.y_res; |
| |
| /*BUG_ON(callback == 0);*/ |
| BUG_ON(rfbi.framedone_callback != NULL); |
| |
| DSSDBG("rfbi_transfer_area %dx%d\n", width, height); |
| |
| dss_mgr_set_timings(mgr, &rfbi.timings); |
| |
| r = dss_mgr_enable(mgr); |
| if (r) |
| return r; |
| |
| rfbi.framedone_callback = callback; |
| rfbi.framedone_callback_data = data; |
| |
| rfbi_write_reg(RFBI_PIXEL_CNT, width * height); |
| |
| l = rfbi_read_reg(RFBI_CONTROL); |
| l = FLD_MOD(l, 1, 0, 0); /* enable */ |
| if (!rfbi.te_enabled) |
| l = FLD_MOD(l, 1, 4, 4); /* ITE */ |
| |
| rfbi_write_reg(RFBI_CONTROL, l); |
| |
| return 0; |
| } |
| |
| static void framedone_callback(void *data) |
| { |
| void (*callback)(void *data); |
| |
| DSSDBG("FRAMEDONE\n"); |
| |
| REG_FLD_MOD(RFBI_CONTROL, 0, 0, 0); |
| |
| callback = rfbi.framedone_callback; |
| rfbi.framedone_callback = NULL; |
| |
| if (callback != NULL) |
| callback(rfbi.framedone_callback_data); |
| } |
| |
| #if 1 /* VERBOSE */ |
| static void rfbi_print_timings(void) |
| { |
| u32 l; |
| u32 time; |
| |
| l = rfbi_read_reg(RFBI_CONFIG(0)); |
| time = 1000000000 / rfbi.l4_khz; |
| if (l & (1 << 4)) |
| time *= 2; |
| |
| DSSDBG("Tick time %u ps\n", time); |
| l = rfbi_read_reg(RFBI_ONOFF_TIME(0)); |
| DSSDBG("CSONTIME %d, CSOFFTIME %d, WEONTIME %d, WEOFFTIME %d, " |
| "REONTIME %d, REOFFTIME %d\n", |
| l & 0x0f, (l >> 4) & 0x3f, (l >> 10) & 0x0f, (l >> 14) & 0x3f, |
| (l >> 20) & 0x0f, (l >> 24) & 0x3f); |
| |
| l = rfbi_read_reg(RFBI_CYCLE_TIME(0)); |
| DSSDBG("WECYCLETIME %d, RECYCLETIME %d, CSPULSEWIDTH %d, " |
| "ACCESSTIME %d\n", |
| (l & 0x3f), (l >> 6) & 0x3f, (l >> 12) & 0x3f, |
| (l >> 22) & 0x3f); |
| } |
| #else |
| static void rfbi_print_timings(void) {} |
| #endif |
| |
| |
| |
| |
| static u32 extif_clk_period; |
| |
| static inline unsigned long round_to_extif_ticks(unsigned long ps, int div) |
| { |
| int bus_tick = extif_clk_period * div; |
| return (ps + bus_tick - 1) / bus_tick * bus_tick; |
| } |
| |
| static int calc_reg_timing(struct rfbi_timings *t, int div) |
| { |
| t->clk_div = div; |
| |
| t->cs_on_time = round_to_extif_ticks(t->cs_on_time, div); |
| |
| t->we_on_time = round_to_extif_ticks(t->we_on_time, div); |
| t->we_off_time = round_to_extif_ticks(t->we_off_time, div); |
| t->we_cycle_time = round_to_extif_ticks(t->we_cycle_time, div); |
| |
| t->re_on_time = round_to_extif_ticks(t->re_on_time, div); |
| t->re_off_time = round_to_extif_ticks(t->re_off_time, div); |
| t->re_cycle_time = round_to_extif_ticks(t->re_cycle_time, div); |
| |
| t->access_time = round_to_extif_ticks(t->access_time, div); |
| t->cs_off_time = round_to_extif_ticks(t->cs_off_time, div); |
| t->cs_pulse_width = round_to_extif_ticks(t->cs_pulse_width, div); |
| |
| DSSDBG("[reg]cson %d csoff %d reon %d reoff %d\n", |
| t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time); |
| DSSDBG("[reg]weon %d weoff %d recyc %d wecyc %d\n", |
| t->we_on_time, t->we_off_time, t->re_cycle_time, |
| t->we_cycle_time); |
| DSSDBG("[reg]rdaccess %d cspulse %d\n", |
| t->access_time, t->cs_pulse_width); |
| |
| return rfbi_convert_timings(t); |
| } |
| |
| static int calc_extif_timings(struct rfbi_timings *t) |
| { |
| u32 max_clk_div; |
| int div; |
| |
| rfbi_get_clk_info(&extif_clk_period, &max_clk_div); |
| for (div = 1; div <= max_clk_div; div++) { |
| if (calc_reg_timing(t, div) == 0) |
| break; |
| } |
| |
| if (div <= max_clk_div) |
| return 0; |
| |
| DSSERR("can't setup timings\n"); |
| return -1; |
| } |
| |
| |
| static void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t) |
| { |
| int r; |
| |
| if (!t->converted) { |
| r = calc_extif_timings(t); |
| if (r < 0) |
| DSSERR("Failed to calc timings\n"); |
| } |
| |
| BUG_ON(!t->converted); |
| |
| rfbi_write_reg(RFBI_ONOFF_TIME(rfbi_module), t->tim[0]); |
| rfbi_write_reg(RFBI_CYCLE_TIME(rfbi_module), t->tim[1]); |
| |
| /* TIMEGRANULARITY */ |
| REG_FLD_MOD(RFBI_CONFIG(rfbi_module), |
| (t->tim[2] ? 1 : 0), 4, 4); |
| |
| rfbi_print_timings(); |
| } |
| |
| static int ps_to_rfbi_ticks(int time, int div) |
| { |
| unsigned long tick_ps; |
| int ret; |
| |
| /* Calculate in picosecs to yield more exact results */ |
| tick_ps = 1000000000 / (rfbi.l4_khz) * div; |
| |
| ret = (time + tick_ps - 1) / tick_ps; |
| |
| return ret; |
| } |
| |
| static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div) |
| { |
| *clk_period = 1000000000 / rfbi.l4_khz; |
| *max_clk_div = 2; |
| } |
| |
| static int rfbi_convert_timings(struct rfbi_timings *t) |
| { |
| u32 l; |
| int reon, reoff, weon, weoff, cson, csoff, cs_pulse; |
| int actim, recyc, wecyc; |
| int div = t->clk_div; |
| |
| if (div <= 0 || div > 2) |
| return -1; |
| |
| /* Make sure that after conversion it still holds that: |
| * weoff > weon, reoff > reon, recyc >= reoff, wecyc >= weoff, |
| * csoff > cson, csoff >= max(weoff, reoff), actim > reon |
| */ |
| weon = ps_to_rfbi_ticks(t->we_on_time, div); |
| weoff = ps_to_rfbi_ticks(t->we_off_time, div); |
| if (weoff <= weon) |
| weoff = weon + 1; |
| if (weon > 0x0f) |
| return -1; |
| if (weoff > 0x3f) |
| return -1; |
| |
| reon = ps_to_rfbi_ticks(t->re_on_time, div); |
| reoff = ps_to_rfbi_ticks(t->re_off_time, div); |
| if (reoff <= reon) |
| reoff = reon + 1; |
| if (reon > 0x0f) |
| return -1; |
| if (reoff > 0x3f) |
| return -1; |
| |
| cson = ps_to_rfbi_ticks(t->cs_on_time, div); |
| csoff = ps_to_rfbi_ticks(t->cs_off_time, div); |
| if (csoff <= cson) |
| csoff = cson + 1; |
| if (csoff < max(weoff, reoff)) |
| csoff = max(weoff, reoff); |
| if (cson > 0x0f) |
| return -1; |
| if (csoff > 0x3f) |
| return -1; |
| |
| l = cson; |
| l |= csoff << 4; |
| l |= weon << 10; |
| l |= weoff << 14; |
| l |= reon << 20; |
| l |= reoff << 24; |
| |
| t->tim[0] = l; |
| |
| actim = ps_to_rfbi_ticks(t->access_time, div); |
| if (actim <= reon) |
| actim = reon + 1; |
| if (actim > 0x3f) |
| return -1; |
| |
| wecyc = ps_to_rfbi_ticks(t->we_cycle_time, div); |
| if (wecyc < weoff) |
| wecyc = weoff; |
| if (wecyc > 0x3f) |
| return -1; |
| |
| recyc = ps_to_rfbi_ticks(t->re_cycle_time, div); |
| if (recyc < reoff) |
| recyc = reoff; |
| if (recyc > 0x3f) |
| return -1; |
| |
| cs_pulse = ps_to_rfbi_ticks(t->cs_pulse_width, div); |
| if (cs_pulse > 0x3f) |
| return -1; |
| |
| l = wecyc; |
| l |= recyc << 6; |
| l |= cs_pulse << 12; |
| l |= actim << 22; |
| |
| t->tim[1] = l; |
| |
| t->tim[2] = div - 1; |
| |
| t->converted = 1; |
| |
| return 0; |
| } |
| |
| /* xxx FIX module selection missing */ |
| static int rfbi_setup_te(enum omap_rfbi_te_mode mode, |
| unsigned hs_pulse_time, unsigned vs_pulse_time, |
| int hs_pol_inv, int vs_pol_inv, int extif_div) |
| { |
| int hs, vs; |
| int min; |
| u32 l; |
| |
| hs = ps_to_rfbi_ticks(hs_pulse_time, 1); |
| vs = ps_to_rfbi_ticks(vs_pulse_time, 1); |
| if (hs < 2) |
| return -EDOM; |
| if (mode == OMAP_DSS_RFBI_TE_MODE_2) |
| min = 2; |
| else /* OMAP_DSS_RFBI_TE_MODE_1 */ |
| min = 4; |
| if (vs < min) |
| return -EDOM; |
| if (vs == hs) |
| return -EINVAL; |
| rfbi.te_mode = mode; |
| DSSDBG("setup_te: mode %d hs %d vs %d hs_inv %d vs_inv %d\n", |
| mode, hs, vs, hs_pol_inv, vs_pol_inv); |
| |
| rfbi_write_reg(RFBI_HSYNC_WIDTH, hs); |
| rfbi_write_reg(RFBI_VSYNC_WIDTH, vs); |
| |
| l = rfbi_read_reg(RFBI_CONFIG(0)); |
| if (hs_pol_inv) |
| l &= ~(1 << 21); |
| else |
| l |= 1 << 21; |
| if (vs_pol_inv) |
| l &= ~(1 << 20); |
| else |
| l |= 1 << 20; |
| |
| return 0; |
| } |
| |
| /* xxx FIX module selection missing */ |
| static int rfbi_enable_te(bool enable, unsigned line) |
| { |
| u32 l; |
| |
| DSSDBG("te %d line %d mode %d\n", enable, line, rfbi.te_mode); |
| if (line > (1 << 11) - 1) |
| return -EINVAL; |
| |
| l = rfbi_read_reg(RFBI_CONFIG(0)); |
| l &= ~(0x3 << 2); |
| if (enable) { |
| rfbi.te_enabled = 1; |
| l |= rfbi.te_mode << 2; |
| } else |
| rfbi.te_enabled = 0; |
| rfbi_write_reg(RFBI_CONFIG(0), l); |
| rfbi_write_reg(RFBI_LINE_NUMBER, line); |
| |
| return 0; |
| } |
| |
| static int rfbi_configure_bus(int rfbi_module, int bpp, int lines) |
| { |
| u32 l; |
| int cycle1 = 0, cycle2 = 0, cycle3 = 0; |
| enum omap_rfbi_cycleformat cycleformat; |
| enum omap_rfbi_datatype datatype; |
| enum omap_rfbi_parallelmode parallelmode; |
| |
| switch (bpp) { |
| case 12: |
| datatype = OMAP_DSS_RFBI_DATATYPE_12; |
| break; |
| case 16: |
| datatype = OMAP_DSS_RFBI_DATATYPE_16; |
| break; |
| case 18: |
| datatype = OMAP_DSS_RFBI_DATATYPE_18; |
| break; |
| case 24: |
| datatype = OMAP_DSS_RFBI_DATATYPE_24; |
| break; |
| default: |
| BUG(); |
| return 1; |
| } |
| rfbi.datatype = datatype; |
| |
| switch (lines) { |
| case 8: |
| parallelmode = OMAP_DSS_RFBI_PARALLELMODE_8; |
| break; |
| case 9: |
| parallelmode = OMAP_DSS_RFBI_PARALLELMODE_9; |
| break; |
| case 12: |
| parallelmode = OMAP_DSS_RFBI_PARALLELMODE_12; |
| break; |
| case 16: |
| parallelmode = OMAP_DSS_RFBI_PARALLELMODE_16; |
| break; |
| default: |
| BUG(); |
| return 1; |
| } |
| rfbi.parallelmode = parallelmode; |
| |
| if ((bpp % lines) == 0) { |
| switch (bpp / lines) { |
| case 1: |
| cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_1_1; |
| break; |
| case 2: |
| cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_2_1; |
| break; |
| case 3: |
| cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_1; |
| break; |
| default: |
| BUG(); |
| return 1; |
| } |
| } else if ((2 * bpp % lines) == 0) { |
| if ((2 * bpp / lines) == 3) |
| cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_2; |
| else { |
| BUG(); |
| return 1; |
| } |
| } else { |
| BUG(); |
| return 1; |
| } |
| |
| switch (cycleformat) { |
| case OMAP_DSS_RFBI_CYCLEFORMAT_1_1: |
| cycle1 = lines; |
| break; |
| |
| case OMAP_DSS_RFBI_CYCLEFORMAT_2_1: |
| cycle1 = lines; |
| cycle2 = lines; |
| break; |
| |
| case OMAP_DSS_RFBI_CYCLEFORMAT_3_1: |
| cycle1 = lines; |
| cycle2 = lines; |
| cycle3 = lines; |
| break; |
| |
| case OMAP_DSS_RFBI_CYCLEFORMAT_3_2: |
| cycle1 = lines; |
| cycle2 = (lines / 2) | ((lines / 2) << 16); |
| cycle3 = (lines << 16); |
| break; |
| } |
| |
| REG_FLD_MOD(RFBI_CONTROL, 0, 3, 2); /* clear CS */ |
| |
| l = 0; |
| l |= FLD_VAL(parallelmode, 1, 0); |
| l |= FLD_VAL(0, 3, 2); /* TRIGGERMODE: ITE */ |
| l |= FLD_VAL(0, 4, 4); /* TIMEGRANULARITY */ |
| l |= FLD_VAL(datatype, 6, 5); |
| /* l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */ |
| l |= FLD_VAL(0, 8, 7); /* L4FORMAT, 1pix/L4 */ |
| l |= FLD_VAL(cycleformat, 10, 9); |
| l |= FLD_VAL(0, 12, 11); /* UNUSEDBITS */ |
| l |= FLD_VAL(0, 16, 16); /* A0POLARITY */ |
| l |= FLD_VAL(0, 17, 17); /* REPOLARITY */ |
| l |= FLD_VAL(0, 18, 18); /* WEPOLARITY */ |
| l |= FLD_VAL(0, 19, 19); /* CSPOLARITY */ |
| l |= FLD_VAL(1, 20, 20); /* TE_VSYNC_POLARITY */ |
| l |= FLD_VAL(1, 21, 21); /* HSYNCPOLARITY */ |
| rfbi_write_reg(RFBI_CONFIG(rfbi_module), l); |
| |
| rfbi_write_reg(RFBI_DATA_CYCLE1(rfbi_module), cycle1); |
| rfbi_write_reg(RFBI_DATA_CYCLE2(rfbi_module), cycle2); |
| rfbi_write_reg(RFBI_DATA_CYCLE3(rfbi_module), cycle3); |
| |
| |
| l = rfbi_read_reg(RFBI_CONTROL); |
| l = FLD_MOD(l, rfbi_module+1, 3, 2); /* Select CSx */ |
| l = FLD_MOD(l, 0, 1, 1); /* clear bypass */ |
| rfbi_write_reg(RFBI_CONTROL, l); |
| |
| |
| DSSDBG("RFBI config: bpp %d, lines %d, cycles: 0x%x 0x%x 0x%x\n", |
| bpp, lines, cycle1, cycle2, cycle3); |
| |
| return 0; |
| } |
| |
| static int rfbi_configure(struct omap_dss_device *dssdev) |
| { |
| return rfbi_configure_bus(dssdev->phy.rfbi.channel, rfbi.pixel_size, |
| rfbi.data_lines); |
| } |
| |
| static int rfbi_update(struct omap_dss_device *dssdev, void (*callback)(void *), |
| void *data) |
| { |
| return rfbi_transfer_area(dssdev, callback, data); |
| } |
| |
| static void rfbi_set_size(struct omap_dss_device *dssdev, u16 w, u16 h) |
| { |
| rfbi.timings.x_res = w; |
| rfbi.timings.y_res = h; |
| } |
| |
| static void rfbi_set_pixel_size(struct omap_dss_device *dssdev, int pixel_size) |
| { |
| rfbi.pixel_size = pixel_size; |
| } |
| |
| static void rfbi_set_data_lines(struct omap_dss_device *dssdev, int data_lines) |
| { |
| rfbi.data_lines = data_lines; |
| } |
| |
| static void rfbi_set_interface_timings(struct omap_dss_device *dssdev, |
| struct rfbi_timings *timings) |
| { |
| rfbi.intf_timings = *timings; |
| } |
| |
| static void rfbi_dump_regs(struct seq_file *s) |
| { |
| #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, rfbi_read_reg(r)) |
| |
| if (rfbi_runtime_get()) |
| return; |
| |
| DUMPREG(RFBI_REVISION); |
| DUMPREG(RFBI_SYSCONFIG); |
| DUMPREG(RFBI_SYSSTATUS); |
| DUMPREG(RFBI_CONTROL); |
| DUMPREG(RFBI_PIXEL_CNT); |
| DUMPREG(RFBI_LINE_NUMBER); |
| DUMPREG(RFBI_CMD); |
| DUMPREG(RFBI_PARAM); |
| DUMPREG(RFBI_DATA); |
| DUMPREG(RFBI_READ); |
| DUMPREG(RFBI_STATUS); |
| |
| DUMPREG(RFBI_CONFIG(0)); |
| DUMPREG(RFBI_ONOFF_TIME(0)); |
| DUMPREG(RFBI_CYCLE_TIME(0)); |
| DUMPREG(RFBI_DATA_CYCLE1(0)); |
| DUMPREG(RFBI_DATA_CYCLE2(0)); |
| DUMPREG(RFBI_DATA_CYCLE3(0)); |
| |
| DUMPREG(RFBI_CONFIG(1)); |
| DUMPREG(RFBI_ONOFF_TIME(1)); |
| DUMPREG(RFBI_CYCLE_TIME(1)); |
| DUMPREG(RFBI_DATA_CYCLE1(1)); |
| DUMPREG(RFBI_DATA_CYCLE2(1)); |
| DUMPREG(RFBI_DATA_CYCLE3(1)); |
| |
| DUMPREG(RFBI_VSYNC_WIDTH); |
| DUMPREG(RFBI_HSYNC_WIDTH); |
| |
| rfbi_runtime_put(); |
| #undef DUMPREG |
| } |
| |
| static void rfbi_config_lcd_manager(struct omap_dss_device *dssdev) |
| { |
| struct omap_overlay_manager *mgr = rfbi.output.manager; |
| struct dss_lcd_mgr_config mgr_config; |
| |
| mgr_config.io_pad_mode = DSS_IO_PAD_MODE_RFBI; |
| |
| mgr_config.stallmode = true; |
| /* Do we need fifohandcheck for RFBI? */ |
| mgr_config.fifohandcheck = false; |
| |
| mgr_config.video_port_width = rfbi.pixel_size; |
| mgr_config.lcden_sig_polarity = 0; |
| |
| dss_mgr_set_lcd_config(mgr, &mgr_config); |
| |
| /* |
| * Set rfbi.timings with default values, the x_res and y_res fields |
| * are expected to be already configured by the panel driver via |
| * omapdss_rfbi_set_size() |
| */ |
| rfbi.timings.hsw = 1; |
| rfbi.timings.hfp = 1; |
| rfbi.timings.hbp = 1; |
| rfbi.timings.vsw = 1; |
| rfbi.timings.vfp = 0; |
| rfbi.timings.vbp = 0; |
| |
| rfbi.timings.interlace = false; |
| rfbi.timings.hsync_level = OMAPDSS_SIG_ACTIVE_HIGH; |
| rfbi.timings.vsync_level = OMAPDSS_SIG_ACTIVE_HIGH; |
| rfbi.timings.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE; |
| rfbi.timings.de_level = OMAPDSS_SIG_ACTIVE_HIGH; |
| rfbi.timings.sync_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE; |
| |
| dss_mgr_set_timings(mgr, &rfbi.timings); |
| } |
| |
| static int rfbi_display_enable(struct omap_dss_device *dssdev) |
| { |
| struct omap_dss_device *out = &rfbi.output; |
| int r; |
| |
| if (!out->dispc_channel_connected) { |
| DSSERR("failed to enable display: no output/manager\n"); |
| return -ENODEV; |
| } |
| |
| r = rfbi_runtime_get(); |
| if (r) |
| return r; |
| |
| r = dss_mgr_register_framedone_handler(out->manager, |
| framedone_callback, NULL); |
| if (r) { |
| DSSERR("can't get FRAMEDONE irq\n"); |
| goto err1; |
| } |
| |
| rfbi_config_lcd_manager(dssdev); |
| |
| rfbi_configure_bus(dssdev->phy.rfbi.channel, rfbi.pixel_size, |
| rfbi.data_lines); |
| |
| rfbi_set_timings(dssdev->phy.rfbi.channel, &rfbi.intf_timings); |
| |
| return 0; |
| err1: |
| rfbi_runtime_put(); |
| return r; |
| } |
| |
| static void rfbi_display_disable(struct omap_dss_device *dssdev) |
| { |
| struct omap_dss_device *out = &rfbi.output; |
| |
| dss_mgr_unregister_framedone_handler(out->manager, |
| framedone_callback, NULL); |
| |
| rfbi_runtime_put(); |
| } |
| |
| static int rfbi_init_display(struct omap_dss_device *dssdev) |
| { |
| rfbi.dssdev[dssdev->phy.rfbi.channel] = dssdev; |
| return 0; |
| } |
| |
| static void rfbi_init_output(struct platform_device *pdev) |
| { |
| struct omap_dss_device *out = &rfbi.output; |
| |
| out->dev = &pdev->dev; |
| out->id = OMAP_DSS_OUTPUT_DBI; |
| out->output_type = OMAP_DISPLAY_TYPE_DBI; |
| out->name = "rfbi.0"; |
| out->dispc_channel = OMAP_DSS_CHANNEL_LCD; |
| out->owner = THIS_MODULE; |
| |
| omapdss_register_output(out); |
| } |
| |
| static void rfbi_uninit_output(struct platform_device *pdev) |
| { |
| struct omap_dss_device *out = &rfbi.output; |
| |
| omapdss_unregister_output(out); |
| } |
| |
| /* RFBI HW IP initialisation */ |
| static int rfbi_bind(struct device *dev, struct device *master, void *data) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| u32 rev; |
| struct resource *rfbi_mem; |
| struct clk *clk; |
| int r; |
| |
| rfbi.pdev = pdev; |
| |
| sema_init(&rfbi.bus_lock, 1); |
| |
| rfbi_mem = platform_get_resource(rfbi.pdev, IORESOURCE_MEM, 0); |
| if (!rfbi_mem) { |
| DSSERR("can't get IORESOURCE_MEM RFBI\n"); |
| return -EINVAL; |
| } |
| |
| rfbi.base = devm_ioremap(&pdev->dev, rfbi_mem->start, |
| resource_size(rfbi_mem)); |
| if (!rfbi.base) { |
| DSSERR("can't ioremap RFBI\n"); |
| return -ENOMEM; |
| } |
| |
| clk = clk_get(&pdev->dev, "ick"); |
| if (IS_ERR(clk)) { |
| DSSERR("can't get ick\n"); |
| return PTR_ERR(clk); |
| } |
| |
| rfbi.l4_khz = clk_get_rate(clk) / 1000; |
| |
| clk_put(clk); |
| |
| pm_runtime_enable(&pdev->dev); |
| |
| r = rfbi_runtime_get(); |
| if (r) |
| goto err_runtime_get; |
| |
| msleep(10); |
| |
| rev = rfbi_read_reg(RFBI_REVISION); |
| dev_dbg(&pdev->dev, "OMAP RFBI rev %d.%d\n", |
| FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); |
| |
| rfbi_runtime_put(); |
| |
| dss_debugfs_create_file("rfbi", rfbi_dump_regs); |
| |
| rfbi_init_output(pdev); |
| |
| return 0; |
| |
| err_runtime_get: |
| pm_runtime_disable(&pdev->dev); |
| return r; |
| } |
| |
| static void rfbi_unbind(struct device *dev, struct device *master, void *data) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| |
| rfbi_uninit_output(pdev); |
| |
| pm_runtime_disable(&pdev->dev); |
| |
| return 0; |
| } |
| |
| static const struct component_ops rfbi_component_ops = { |
| .bind = rfbi_bind, |
| .unbind = rfbi_unbind, |
| }; |
| |
| static int rfbi_probe(struct platform_device *pdev) |
| { |
| return component_add(&pdev->dev, &rfbi_component_ops); |
| } |
| |
| static int rfbi_remove(struct platform_device *pdev) |
| { |
| component_del(&pdev->dev, &rfbi_component_ops); |
| return 0; |
| } |
| |
| static int rfbi_runtime_suspend(struct device *dev) |
| { |
| dispc_runtime_put(); |
| |
| return 0; |
| } |
| |
| static int rfbi_runtime_resume(struct device *dev) |
| { |
| int r; |
| |
| r = dispc_runtime_get(); |
| if (r < 0) |
| return r; |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops rfbi_pm_ops = { |
| .runtime_suspend = rfbi_runtime_suspend, |
| .runtime_resume = rfbi_runtime_resume, |
| }; |
| |
| static struct platform_driver omap_rfbihw_driver = { |
| .probe = rfbi_probe, |
| .remove = rfbi_remove, |
| .driver = { |
| .name = "omapdss_rfbi", |
| .pm = &rfbi_pm_ops, |
| .suppress_bind_attrs = true, |
| }, |
| }; |
| |
| int __init rfbi_init_platform_driver(void) |
| { |
| return platform_driver_register(&omap_rfbihw_driver); |
| } |
| |
| void rfbi_uninit_platform_driver(void) |
| { |
| platform_driver_unregister(&omap_rfbihw_driver); |
| } |