| /* |
| * f_loopback.c - USB peripheral loopback configuration driver |
| * |
| * Copyright (C) 2003-2008 David Brownell |
| * Copyright (C) 2008 by Nokia Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| /* #define VERBOSE_DEBUG */ |
| |
| #include <linux/slab.h> |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/err.h> |
| #include <linux/usb/composite.h> |
| |
| #include "g_zero.h" |
| #include "u_f.h" |
| |
| /* |
| * LOOPBACK FUNCTION ... a testing vehicle for USB peripherals, |
| * |
| * This takes messages of various sizes written OUT to a device, and loops |
| * them back so they can be read IN from it. It has been used by certain |
| * test applications. It supports limited testing of data queueing logic. |
| */ |
| struct f_loopback { |
| struct usb_function function; |
| |
| struct usb_ep *in_ep; |
| struct usb_ep *out_ep; |
| |
| unsigned qlen; |
| unsigned buflen; |
| }; |
| |
| static inline struct f_loopback *func_to_loop(struct usb_function *f) |
| { |
| return container_of(f, struct f_loopback, function); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static struct usb_interface_descriptor loopback_intf = { |
| .bLength = sizeof(loopback_intf), |
| .bDescriptorType = USB_DT_INTERFACE, |
| |
| .bNumEndpoints = 2, |
| .bInterfaceClass = USB_CLASS_VENDOR_SPEC, |
| /* .iInterface = DYNAMIC */ |
| }; |
| |
| /* full speed support: */ |
| |
| static struct usb_endpoint_descriptor fs_loop_source_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| }; |
| |
| static struct usb_endpoint_descriptor fs_loop_sink_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| }; |
| |
| static struct usb_descriptor_header *fs_loopback_descs[] = { |
| (struct usb_descriptor_header *) &loopback_intf, |
| (struct usb_descriptor_header *) &fs_loop_sink_desc, |
| (struct usb_descriptor_header *) &fs_loop_source_desc, |
| NULL, |
| }; |
| |
| /* high speed support: */ |
| |
| static struct usb_endpoint_descriptor hs_loop_source_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(512), |
| }; |
| |
| static struct usb_endpoint_descriptor hs_loop_sink_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(512), |
| }; |
| |
| static struct usb_descriptor_header *hs_loopback_descs[] = { |
| (struct usb_descriptor_header *) &loopback_intf, |
| (struct usb_descriptor_header *) &hs_loop_source_desc, |
| (struct usb_descriptor_header *) &hs_loop_sink_desc, |
| NULL, |
| }; |
| |
| /* super speed support: */ |
| |
| static struct usb_endpoint_descriptor ss_loop_source_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(1024), |
| }; |
| |
| static struct usb_ss_ep_comp_descriptor ss_loop_source_comp_desc = { |
| .bLength = USB_DT_SS_EP_COMP_SIZE, |
| .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, |
| .bMaxBurst = 0, |
| .bmAttributes = 0, |
| .wBytesPerInterval = 0, |
| }; |
| |
| static struct usb_endpoint_descriptor ss_loop_sink_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(1024), |
| }; |
| |
| static struct usb_ss_ep_comp_descriptor ss_loop_sink_comp_desc = { |
| .bLength = USB_DT_SS_EP_COMP_SIZE, |
| .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, |
| .bMaxBurst = 0, |
| .bmAttributes = 0, |
| .wBytesPerInterval = 0, |
| }; |
| |
| static struct usb_descriptor_header *ss_loopback_descs[] = { |
| (struct usb_descriptor_header *) &loopback_intf, |
| (struct usb_descriptor_header *) &ss_loop_source_desc, |
| (struct usb_descriptor_header *) &ss_loop_source_comp_desc, |
| (struct usb_descriptor_header *) &ss_loop_sink_desc, |
| (struct usb_descriptor_header *) &ss_loop_sink_comp_desc, |
| NULL, |
| }; |
| |
| /* function-specific strings: */ |
| |
| static struct usb_string strings_loopback[] = { |
| [0].s = "loop input to output", |
| { } /* end of list */ |
| }; |
| |
| static struct usb_gadget_strings stringtab_loop = { |
| .language = 0x0409, /* en-us */ |
| .strings = strings_loopback, |
| }; |
| |
| static struct usb_gadget_strings *loopback_strings[] = { |
| &stringtab_loop, |
| NULL, |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int loopback_bind(struct usb_configuration *c, struct usb_function *f) |
| { |
| struct usb_composite_dev *cdev = c->cdev; |
| struct f_loopback *loop = func_to_loop(f); |
| int id; |
| int ret; |
| |
| /* allocate interface ID(s) */ |
| id = usb_interface_id(c, f); |
| if (id < 0) |
| return id; |
| loopback_intf.bInterfaceNumber = id; |
| |
| id = usb_string_id(cdev); |
| if (id < 0) |
| return id; |
| strings_loopback[0].id = id; |
| loopback_intf.iInterface = id; |
| |
| /* allocate endpoints */ |
| |
| loop->in_ep = usb_ep_autoconfig(cdev->gadget, &fs_loop_source_desc); |
| if (!loop->in_ep) { |
| autoconf_fail: |
| ERROR(cdev, "%s: can't autoconfigure on %s\n", |
| f->name, cdev->gadget->name); |
| return -ENODEV; |
| } |
| |
| loop->out_ep = usb_ep_autoconfig(cdev->gadget, &fs_loop_sink_desc); |
| if (!loop->out_ep) |
| goto autoconf_fail; |
| |
| /* support high speed hardware */ |
| hs_loop_source_desc.bEndpointAddress = |
| fs_loop_source_desc.bEndpointAddress; |
| hs_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress; |
| |
| /* support super speed hardware */ |
| ss_loop_source_desc.bEndpointAddress = |
| fs_loop_source_desc.bEndpointAddress; |
| ss_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress; |
| |
| ret = usb_assign_descriptors(f, fs_loopback_descs, hs_loopback_descs, |
| ss_loopback_descs, NULL); |
| if (ret) |
| return ret; |
| |
| DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n", |
| (gadget_is_superspeed(c->cdev->gadget) ? "super" : |
| (gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full")), |
| f->name, loop->in_ep->name, loop->out_ep->name); |
| return 0; |
| } |
| |
| static void lb_free_func(struct usb_function *f) |
| { |
| struct f_lb_opts *opts; |
| |
| opts = container_of(f->fi, struct f_lb_opts, func_inst); |
| |
| mutex_lock(&opts->lock); |
| opts->refcnt--; |
| mutex_unlock(&opts->lock); |
| |
| usb_free_all_descriptors(f); |
| kfree(func_to_loop(f)); |
| } |
| |
| static void loopback_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct f_loopback *loop = ep->driver_data; |
| struct usb_composite_dev *cdev = loop->function.config->cdev; |
| int status = req->status; |
| |
| switch (status) { |
| case 0: /* normal completion? */ |
| if (ep == loop->out_ep) { |
| /* |
| * We received some data from the host so let's |
| * queue it so host can read the from our in ep |
| */ |
| struct usb_request *in_req = req->context; |
| |
| in_req->zero = (req->actual < req->length); |
| in_req->length = req->actual; |
| ep = loop->in_ep; |
| req = in_req; |
| } else { |
| /* |
| * We have just looped back a bunch of data |
| * to host. Now let's wait for some more data. |
| */ |
| req = req->context; |
| ep = loop->out_ep; |
| } |
| |
| /* queue the buffer back to host or for next bunch of data */ |
| status = usb_ep_queue(ep, req, GFP_ATOMIC); |
| if (status == 0) { |
| return; |
| } else { |
| ERROR(cdev, "Unable to loop back buffer to %s: %d\n", |
| ep->name, status); |
| goto free_req; |
| } |
| |
| /* "should never get here" */ |
| default: |
| ERROR(cdev, "%s loop complete --> %d, %d/%d\n", ep->name, |
| status, req->actual, req->length); |
| /* FALLTHROUGH */ |
| |
| /* NOTE: since this driver doesn't maintain an explicit record |
| * of requests it submitted (just maintains qlen count), we |
| * rely on the hardware driver to clean up on disconnect or |
| * endpoint disable. |
| */ |
| case -ECONNABORTED: /* hardware forced ep reset */ |
| case -ECONNRESET: /* request dequeued */ |
| case -ESHUTDOWN: /* disconnect from host */ |
| free_req: |
| usb_ep_free_request(ep == loop->in_ep ? |
| loop->out_ep : loop->in_ep, |
| req->context); |
| free_ep_req(ep, req); |
| return; |
| } |
| } |
| |
| static void disable_loopback(struct f_loopback *loop) |
| { |
| struct usb_composite_dev *cdev; |
| |
| cdev = loop->function.config->cdev; |
| disable_endpoints(cdev, loop->in_ep, loop->out_ep, NULL, NULL); |
| VDBG(cdev, "%s disabled\n", loop->function.name); |
| } |
| |
| static inline struct usb_request *lb_alloc_ep_req(struct usb_ep *ep, int len) |
| { |
| struct f_loopback *loop = ep->driver_data; |
| |
| return alloc_ep_req(ep, len, loop->buflen); |
| } |
| |
| static int alloc_requests(struct usb_composite_dev *cdev, |
| struct f_loopback *loop) |
| { |
| struct usb_request *in_req, *out_req; |
| int i; |
| int result = 0; |
| |
| /* |
| * allocate a bunch of read buffers and queue them all at once. |
| * we buffer at most 'qlen' transfers; We allocate buffers only |
| * for out transfer and reuse them in IN transfers to implement |
| * our loopback functionality |
| */ |
| for (i = 0; i < loop->qlen && result == 0; i++) { |
| result = -ENOMEM; |
| |
| in_req = usb_ep_alloc_request(loop->in_ep, GFP_ATOMIC); |
| if (!in_req) |
| goto fail; |
| |
| out_req = lb_alloc_ep_req(loop->out_ep, 0); |
| if (!out_req) |
| goto fail_in; |
| |
| in_req->complete = loopback_complete; |
| out_req->complete = loopback_complete; |
| |
| in_req->buf = out_req->buf; |
| /* length will be set in complete routine */ |
| in_req->context = out_req; |
| out_req->context = in_req; |
| |
| result = usb_ep_queue(loop->out_ep, out_req, GFP_ATOMIC); |
| if (result) { |
| ERROR(cdev, "%s queue req --> %d\n", |
| loop->out_ep->name, result); |
| goto fail_out; |
| } |
| } |
| |
| return 0; |
| |
| fail_out: |
| free_ep_req(loop->out_ep, out_req); |
| fail_in: |
| usb_ep_free_request(loop->in_ep, in_req); |
| fail: |
| return result; |
| } |
| |
| static int enable_endpoint(struct usb_composite_dev *cdev, |
| struct f_loopback *loop, struct usb_ep *ep) |
| { |
| int result; |
| |
| result = config_ep_by_speed(cdev->gadget, &(loop->function), ep); |
| if (result) |
| goto out; |
| |
| result = usb_ep_enable(ep); |
| if (result < 0) |
| goto out; |
| ep->driver_data = loop; |
| result = 0; |
| |
| out: |
| return result; |
| } |
| |
| static int |
| enable_loopback(struct usb_composite_dev *cdev, struct f_loopback *loop) |
| { |
| int result = 0; |
| |
| result = enable_endpoint(cdev, loop, loop->in_ep); |
| if (result) |
| goto out; |
| |
| result = enable_endpoint(cdev, loop, loop->out_ep); |
| if (result) |
| goto disable_in; |
| |
| result = alloc_requests(cdev, loop); |
| if (result) |
| goto disable_out; |
| |
| DBG(cdev, "%s enabled\n", loop->function.name); |
| return 0; |
| |
| disable_out: |
| usb_ep_disable(loop->out_ep); |
| disable_in: |
| usb_ep_disable(loop->in_ep); |
| out: |
| return result; |
| } |
| |
| static int loopback_set_alt(struct usb_function *f, |
| unsigned intf, unsigned alt) |
| { |
| struct f_loopback *loop = func_to_loop(f); |
| struct usb_composite_dev *cdev = f->config->cdev; |
| |
| /* we know alt is zero */ |
| disable_loopback(loop); |
| return enable_loopback(cdev, loop); |
| } |
| |
| static void loopback_disable(struct usb_function *f) |
| { |
| struct f_loopback *loop = func_to_loop(f); |
| |
| disable_loopback(loop); |
| } |
| |
| static struct usb_function *loopback_alloc(struct usb_function_instance *fi) |
| { |
| struct f_loopback *loop; |
| struct f_lb_opts *lb_opts; |
| |
| loop = kzalloc(sizeof *loop, GFP_KERNEL); |
| if (!loop) |
| return ERR_PTR(-ENOMEM); |
| |
| lb_opts = container_of(fi, struct f_lb_opts, func_inst); |
| |
| mutex_lock(&lb_opts->lock); |
| lb_opts->refcnt++; |
| mutex_unlock(&lb_opts->lock); |
| |
| loop->buflen = lb_opts->bulk_buflen; |
| loop->qlen = lb_opts->qlen; |
| if (!loop->qlen) |
| loop->qlen = 32; |
| |
| loop->function.name = "loopback"; |
| loop->function.bind = loopback_bind; |
| loop->function.set_alt = loopback_set_alt; |
| loop->function.disable = loopback_disable; |
| loop->function.strings = loopback_strings; |
| |
| loop->function.free_func = lb_free_func; |
| |
| return &loop->function; |
| } |
| |
| static inline struct f_lb_opts *to_f_lb_opts(struct config_item *item) |
| { |
| return container_of(to_config_group(item), struct f_lb_opts, |
| func_inst.group); |
| } |
| |
| static void lb_attr_release(struct config_item *item) |
| { |
| struct f_lb_opts *lb_opts = to_f_lb_opts(item); |
| |
| usb_put_function_instance(&lb_opts->func_inst); |
| } |
| |
| static struct configfs_item_operations lb_item_ops = { |
| .release = lb_attr_release, |
| }; |
| |
| static ssize_t f_lb_opts_qlen_show(struct config_item *item, char *page) |
| { |
| struct f_lb_opts *opts = to_f_lb_opts(item); |
| int result; |
| |
| mutex_lock(&opts->lock); |
| result = sprintf(page, "%d\n", opts->qlen); |
| mutex_unlock(&opts->lock); |
| |
| return result; |
| } |
| |
| static ssize_t f_lb_opts_qlen_store(struct config_item *item, |
| const char *page, size_t len) |
| { |
| struct f_lb_opts *opts = to_f_lb_opts(item); |
| int ret; |
| u32 num; |
| |
| mutex_lock(&opts->lock); |
| if (opts->refcnt) { |
| ret = -EBUSY; |
| goto end; |
| } |
| |
| ret = kstrtou32(page, 0, &num); |
| if (ret) |
| goto end; |
| |
| opts->qlen = num; |
| ret = len; |
| end: |
| mutex_unlock(&opts->lock); |
| return ret; |
| } |
| |
| CONFIGFS_ATTR(f_lb_opts_, qlen); |
| |
| static ssize_t f_lb_opts_bulk_buflen_show(struct config_item *item, char *page) |
| { |
| struct f_lb_opts *opts = to_f_lb_opts(item); |
| int result; |
| |
| mutex_lock(&opts->lock); |
| result = sprintf(page, "%d\n", opts->bulk_buflen); |
| mutex_unlock(&opts->lock); |
| |
| return result; |
| } |
| |
| static ssize_t f_lb_opts_bulk_buflen_store(struct config_item *item, |
| const char *page, size_t len) |
| { |
| struct f_lb_opts *opts = to_f_lb_opts(item); |
| int ret; |
| u32 num; |
| |
| mutex_lock(&opts->lock); |
| if (opts->refcnt) { |
| ret = -EBUSY; |
| goto end; |
| } |
| |
| ret = kstrtou32(page, 0, &num); |
| if (ret) |
| goto end; |
| |
| opts->bulk_buflen = num; |
| ret = len; |
| end: |
| mutex_unlock(&opts->lock); |
| return ret; |
| } |
| |
| CONFIGFS_ATTR(f_lb_opts_, bulk_buflen); |
| |
| static struct configfs_attribute *lb_attrs[] = { |
| &f_lb_opts_attr_qlen, |
| &f_lb_opts_attr_bulk_buflen, |
| NULL, |
| }; |
| |
| static struct config_item_type lb_func_type = { |
| .ct_item_ops = &lb_item_ops, |
| .ct_attrs = lb_attrs, |
| .ct_owner = THIS_MODULE, |
| }; |
| |
| static void lb_free_instance(struct usb_function_instance *fi) |
| { |
| struct f_lb_opts *lb_opts; |
| |
| lb_opts = container_of(fi, struct f_lb_opts, func_inst); |
| kfree(lb_opts); |
| } |
| |
| static struct usb_function_instance *loopback_alloc_instance(void) |
| { |
| struct f_lb_opts *lb_opts; |
| |
| lb_opts = kzalloc(sizeof(*lb_opts), GFP_KERNEL); |
| if (!lb_opts) |
| return ERR_PTR(-ENOMEM); |
| mutex_init(&lb_opts->lock); |
| lb_opts->func_inst.free_func_inst = lb_free_instance; |
| lb_opts->bulk_buflen = GZERO_BULK_BUFLEN; |
| lb_opts->qlen = GZERO_QLEN; |
| |
| config_group_init_type_name(&lb_opts->func_inst.group, "", |
| &lb_func_type); |
| |
| return &lb_opts->func_inst; |
| } |
| DECLARE_USB_FUNCTION(Loopback, loopback_alloc_instance, loopback_alloc); |
| |
| int __init lb_modinit(void) |
| { |
| int ret; |
| |
| ret = usb_function_register(&Loopbackusb_func); |
| if (ret) |
| return ret; |
| return ret; |
| } |
| void __exit lb_modexit(void) |
| { |
| usb_function_unregister(&Loopbackusb_func); |
| } |
| |
| MODULE_LICENSE("GPL"); |