| /* |
| * Copyright © 2014 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| */ |
| |
| /** |
| * DOC: Frame Buffer Compression (FBC) |
| * |
| * FBC tries to save memory bandwidth (and so power consumption) by |
| * compressing the amount of memory used by the display. It is total |
| * transparent to user space and completely handled in the kernel. |
| * |
| * The benefits of FBC are mostly visible with solid backgrounds and |
| * variation-less patterns. It comes from keeping the memory footprint small |
| * and having fewer memory pages opened and accessed for refreshing the display. |
| * |
| * i915 is responsible to reserve stolen memory for FBC and configure its |
| * offset on proper registers. The hardware takes care of all |
| * compress/decompress. However there are many known cases where we have to |
| * forcibly disable it to allow proper screen updates. |
| */ |
| |
| #include "intel_drv.h" |
| #include "i915_drv.h" |
| |
| static inline bool fbc_supported(struct drm_i915_private *dev_priv) |
| { |
| return HAS_FBC(dev_priv); |
| } |
| |
| static inline bool fbc_on_pipe_a_only(struct drm_i915_private *dev_priv) |
| { |
| return IS_HASWELL(dev_priv) || INTEL_INFO(dev_priv)->gen >= 8; |
| } |
| |
| static inline bool fbc_on_plane_a_only(struct drm_i915_private *dev_priv) |
| { |
| return INTEL_INFO(dev_priv)->gen < 4; |
| } |
| |
| static inline bool no_fbc_on_multiple_pipes(struct drm_i915_private *dev_priv) |
| { |
| return INTEL_INFO(dev_priv)->gen <= 3; |
| } |
| |
| /* |
| * In some platforms where the CRTC's x:0/y:0 coordinates doesn't match the |
| * frontbuffer's x:0/y:0 coordinates we lie to the hardware about the plane's |
| * origin so the x and y offsets can actually fit the registers. As a |
| * consequence, the fence doesn't really start exactly at the display plane |
| * address we program because it starts at the real start of the buffer, so we |
| * have to take this into consideration here. |
| */ |
| static unsigned int get_crtc_fence_y_offset(struct intel_crtc *crtc) |
| { |
| return crtc->base.y - crtc->adjusted_y; |
| } |
| |
| /* |
| * For SKL+, the plane source size used by the hardware is based on the value we |
| * write to the PLANE_SIZE register. For BDW-, the hardware looks at the value |
| * we wrote to PIPESRC. |
| */ |
| static void intel_fbc_get_plane_source_size(struct intel_fbc_state_cache *cache, |
| int *width, int *height) |
| { |
| int w, h; |
| |
| if (intel_rotation_90_or_270(cache->plane.rotation)) { |
| w = cache->plane.src_h; |
| h = cache->plane.src_w; |
| } else { |
| w = cache->plane.src_w; |
| h = cache->plane.src_h; |
| } |
| |
| if (width) |
| *width = w; |
| if (height) |
| *height = h; |
| } |
| |
| static int intel_fbc_calculate_cfb_size(struct drm_i915_private *dev_priv, |
| struct intel_fbc_state_cache *cache) |
| { |
| int lines; |
| |
| intel_fbc_get_plane_source_size(cache, NULL, &lines); |
| if (INTEL_INFO(dev_priv)->gen >= 7) |
| lines = min(lines, 2048); |
| |
| /* Hardware needs the full buffer stride, not just the active area. */ |
| return lines * cache->fb.stride; |
| } |
| |
| static void i8xx_fbc_deactivate(struct drm_i915_private *dev_priv) |
| { |
| u32 fbc_ctl; |
| |
| /* Disable compression */ |
| fbc_ctl = I915_READ(FBC_CONTROL); |
| if ((fbc_ctl & FBC_CTL_EN) == 0) |
| return; |
| |
| fbc_ctl &= ~FBC_CTL_EN; |
| I915_WRITE(FBC_CONTROL, fbc_ctl); |
| |
| /* Wait for compressing bit to clear */ |
| if (wait_for((I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) == 0, 10)) { |
| DRM_DEBUG_KMS("FBC idle timed out\n"); |
| return; |
| } |
| } |
| |
| static void i8xx_fbc_activate(struct drm_i915_private *dev_priv) |
| { |
| struct intel_fbc_reg_params *params = &dev_priv->fbc.params; |
| int cfb_pitch; |
| int i; |
| u32 fbc_ctl; |
| |
| /* Note: fbc.threshold == 1 for i8xx */ |
| cfb_pitch = params->cfb_size / FBC_LL_SIZE; |
| if (params->fb.stride < cfb_pitch) |
| cfb_pitch = params->fb.stride; |
| |
| /* FBC_CTL wants 32B or 64B units */ |
| if (IS_GEN2(dev_priv)) |
| cfb_pitch = (cfb_pitch / 32) - 1; |
| else |
| cfb_pitch = (cfb_pitch / 64) - 1; |
| |
| /* Clear old tags */ |
| for (i = 0; i < (FBC_LL_SIZE / 32) + 1; i++) |
| I915_WRITE(FBC_TAG(i), 0); |
| |
| if (IS_GEN4(dev_priv)) { |
| u32 fbc_ctl2; |
| |
| /* Set it up... */ |
| fbc_ctl2 = FBC_CTL_FENCE_DBL | FBC_CTL_IDLE_IMM | FBC_CTL_CPU_FENCE; |
| fbc_ctl2 |= FBC_CTL_PLANE(params->crtc.plane); |
| I915_WRITE(FBC_CONTROL2, fbc_ctl2); |
| I915_WRITE(FBC_FENCE_OFF, params->crtc.fence_y_offset); |
| } |
| |
| /* enable it... */ |
| fbc_ctl = I915_READ(FBC_CONTROL); |
| fbc_ctl &= 0x3fff << FBC_CTL_INTERVAL_SHIFT; |
| fbc_ctl |= FBC_CTL_EN | FBC_CTL_PERIODIC; |
| if (IS_I945GM(dev_priv)) |
| fbc_ctl |= FBC_CTL_C3_IDLE; /* 945 needs special SR handling */ |
| fbc_ctl |= (cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT; |
| fbc_ctl |= params->fb.fence_reg; |
| I915_WRITE(FBC_CONTROL, fbc_ctl); |
| } |
| |
| static bool i8xx_fbc_is_active(struct drm_i915_private *dev_priv) |
| { |
| return I915_READ(FBC_CONTROL) & FBC_CTL_EN; |
| } |
| |
| static void g4x_fbc_activate(struct drm_i915_private *dev_priv) |
| { |
| struct intel_fbc_reg_params *params = &dev_priv->fbc.params; |
| u32 dpfc_ctl; |
| |
| dpfc_ctl = DPFC_CTL_PLANE(params->crtc.plane) | DPFC_SR_EN; |
| if (drm_format_plane_cpp(params->fb.pixel_format, 0) == 2) |
| dpfc_ctl |= DPFC_CTL_LIMIT_2X; |
| else |
| dpfc_ctl |= DPFC_CTL_LIMIT_1X; |
| dpfc_ctl |= DPFC_CTL_FENCE_EN | params->fb.fence_reg; |
| |
| I915_WRITE(DPFC_FENCE_YOFF, params->crtc.fence_y_offset); |
| |
| /* enable it... */ |
| I915_WRITE(DPFC_CONTROL, dpfc_ctl | DPFC_CTL_EN); |
| } |
| |
| static void g4x_fbc_deactivate(struct drm_i915_private *dev_priv) |
| { |
| u32 dpfc_ctl; |
| |
| /* Disable compression */ |
| dpfc_ctl = I915_READ(DPFC_CONTROL); |
| if (dpfc_ctl & DPFC_CTL_EN) { |
| dpfc_ctl &= ~DPFC_CTL_EN; |
| I915_WRITE(DPFC_CONTROL, dpfc_ctl); |
| } |
| } |
| |
| static bool g4x_fbc_is_active(struct drm_i915_private *dev_priv) |
| { |
| return I915_READ(DPFC_CONTROL) & DPFC_CTL_EN; |
| } |
| |
| /* This function forces a CFB recompression through the nuke operation. */ |
| static void intel_fbc_recompress(struct drm_i915_private *dev_priv) |
| { |
| I915_WRITE(MSG_FBC_REND_STATE, FBC_REND_NUKE); |
| POSTING_READ(MSG_FBC_REND_STATE); |
| } |
| |
| static void ilk_fbc_activate(struct drm_i915_private *dev_priv) |
| { |
| struct intel_fbc_reg_params *params = &dev_priv->fbc.params; |
| u32 dpfc_ctl; |
| int threshold = dev_priv->fbc.threshold; |
| |
| dpfc_ctl = DPFC_CTL_PLANE(params->crtc.plane); |
| if (drm_format_plane_cpp(params->fb.pixel_format, 0) == 2) |
| threshold++; |
| |
| switch (threshold) { |
| case 4: |
| case 3: |
| dpfc_ctl |= DPFC_CTL_LIMIT_4X; |
| break; |
| case 2: |
| dpfc_ctl |= DPFC_CTL_LIMIT_2X; |
| break; |
| case 1: |
| dpfc_ctl |= DPFC_CTL_LIMIT_1X; |
| break; |
| } |
| dpfc_ctl |= DPFC_CTL_FENCE_EN; |
| if (IS_GEN5(dev_priv)) |
| dpfc_ctl |= params->fb.fence_reg; |
| |
| I915_WRITE(ILK_DPFC_FENCE_YOFF, params->crtc.fence_y_offset); |
| I915_WRITE(ILK_FBC_RT_BASE, params->fb.ggtt_offset | ILK_FBC_RT_VALID); |
| /* enable it... */ |
| I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl | DPFC_CTL_EN); |
| |
| if (IS_GEN6(dev_priv)) { |
| I915_WRITE(SNB_DPFC_CTL_SA, |
| SNB_CPU_FENCE_ENABLE | params->fb.fence_reg); |
| I915_WRITE(DPFC_CPU_FENCE_OFFSET, params->crtc.fence_y_offset); |
| } |
| |
| intel_fbc_recompress(dev_priv); |
| } |
| |
| static void ilk_fbc_deactivate(struct drm_i915_private *dev_priv) |
| { |
| u32 dpfc_ctl; |
| |
| /* Disable compression */ |
| dpfc_ctl = I915_READ(ILK_DPFC_CONTROL); |
| if (dpfc_ctl & DPFC_CTL_EN) { |
| dpfc_ctl &= ~DPFC_CTL_EN; |
| I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl); |
| } |
| } |
| |
| static bool ilk_fbc_is_active(struct drm_i915_private *dev_priv) |
| { |
| return I915_READ(ILK_DPFC_CONTROL) & DPFC_CTL_EN; |
| } |
| |
| static void gen7_fbc_activate(struct drm_i915_private *dev_priv) |
| { |
| struct intel_fbc_reg_params *params = &dev_priv->fbc.params; |
| u32 dpfc_ctl; |
| int threshold = dev_priv->fbc.threshold; |
| |
| dpfc_ctl = 0; |
| if (IS_IVYBRIDGE(dev_priv)) |
| dpfc_ctl |= IVB_DPFC_CTL_PLANE(params->crtc.plane); |
| |
| if (drm_format_plane_cpp(params->fb.pixel_format, 0) == 2) |
| threshold++; |
| |
| switch (threshold) { |
| case 4: |
| case 3: |
| dpfc_ctl |= DPFC_CTL_LIMIT_4X; |
| break; |
| case 2: |
| dpfc_ctl |= DPFC_CTL_LIMIT_2X; |
| break; |
| case 1: |
| dpfc_ctl |= DPFC_CTL_LIMIT_1X; |
| break; |
| } |
| |
| dpfc_ctl |= IVB_DPFC_CTL_FENCE_EN; |
| |
| if (dev_priv->fbc.false_color) |
| dpfc_ctl |= FBC_CTL_FALSE_COLOR; |
| |
| if (IS_IVYBRIDGE(dev_priv)) { |
| /* WaFbcAsynchFlipDisableFbcQueue:ivb */ |
| I915_WRITE(ILK_DISPLAY_CHICKEN1, |
| I915_READ(ILK_DISPLAY_CHICKEN1) | |
| ILK_FBCQ_DIS); |
| } else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) { |
| /* WaFbcAsynchFlipDisableFbcQueue:hsw,bdw */ |
| I915_WRITE(CHICKEN_PIPESL_1(params->crtc.pipe), |
| I915_READ(CHICKEN_PIPESL_1(params->crtc.pipe)) | |
| HSW_FBCQ_DIS); |
| } |
| |
| I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl | DPFC_CTL_EN); |
| |
| I915_WRITE(SNB_DPFC_CTL_SA, |
| SNB_CPU_FENCE_ENABLE | params->fb.fence_reg); |
| I915_WRITE(DPFC_CPU_FENCE_OFFSET, params->crtc.fence_y_offset); |
| |
| intel_fbc_recompress(dev_priv); |
| } |
| |
| static bool intel_fbc_hw_is_active(struct drm_i915_private *dev_priv) |
| { |
| if (INTEL_INFO(dev_priv)->gen >= 5) |
| return ilk_fbc_is_active(dev_priv); |
| else if (IS_GM45(dev_priv)) |
| return g4x_fbc_is_active(dev_priv); |
| else |
| return i8xx_fbc_is_active(dev_priv); |
| } |
| |
| static void intel_fbc_hw_activate(struct drm_i915_private *dev_priv) |
| { |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| |
| fbc->active = true; |
| |
| if (INTEL_INFO(dev_priv)->gen >= 7) |
| gen7_fbc_activate(dev_priv); |
| else if (INTEL_INFO(dev_priv)->gen >= 5) |
| ilk_fbc_activate(dev_priv); |
| else if (IS_GM45(dev_priv)) |
| g4x_fbc_activate(dev_priv); |
| else |
| i8xx_fbc_activate(dev_priv); |
| } |
| |
| static void intel_fbc_hw_deactivate(struct drm_i915_private *dev_priv) |
| { |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| |
| fbc->active = false; |
| |
| if (INTEL_INFO(dev_priv)->gen >= 5) |
| ilk_fbc_deactivate(dev_priv); |
| else if (IS_GM45(dev_priv)) |
| g4x_fbc_deactivate(dev_priv); |
| else |
| i8xx_fbc_deactivate(dev_priv); |
| } |
| |
| /** |
| * intel_fbc_is_active - Is FBC active? |
| * @dev_priv: i915 device instance |
| * |
| * This function is used to verify the current state of FBC. |
| * FIXME: This should be tracked in the plane config eventually |
| * instead of queried at runtime for most callers. |
| */ |
| bool intel_fbc_is_active(struct drm_i915_private *dev_priv) |
| { |
| return dev_priv->fbc.active; |
| } |
| |
| static void intel_fbc_work_fn(struct work_struct *__work) |
| { |
| struct drm_i915_private *dev_priv = |
| container_of(__work, struct drm_i915_private, fbc.work.work); |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| struct intel_fbc_work *work = &fbc->work; |
| struct intel_crtc *crtc = fbc->crtc; |
| struct drm_vblank_crtc *vblank = &dev_priv->dev->vblank[crtc->pipe]; |
| |
| if (drm_crtc_vblank_get(&crtc->base)) { |
| DRM_ERROR("vblank not available for FBC on pipe %c\n", |
| pipe_name(crtc->pipe)); |
| |
| mutex_lock(&fbc->lock); |
| work->scheduled = false; |
| mutex_unlock(&fbc->lock); |
| return; |
| } |
| |
| retry: |
| /* Delay the actual enabling to let pageflipping cease and the |
| * display to settle before starting the compression. Note that |
| * this delay also serves a second purpose: it allows for a |
| * vblank to pass after disabling the FBC before we attempt |
| * to modify the control registers. |
| * |
| * WaFbcWaitForVBlankBeforeEnable:ilk,snb |
| * |
| * It is also worth mentioning that since work->scheduled_vblank can be |
| * updated multiple times by the other threads, hitting the timeout is |
| * not an error condition. We'll just end up hitting the "goto retry" |
| * case below. |
| */ |
| wait_event_timeout(vblank->queue, |
| drm_crtc_vblank_count(&crtc->base) != work->scheduled_vblank, |
| msecs_to_jiffies(50)); |
| |
| mutex_lock(&fbc->lock); |
| |
| /* Were we cancelled? */ |
| if (!work->scheduled) |
| goto out; |
| |
| /* Were we delayed again while this function was sleeping? */ |
| if (drm_crtc_vblank_count(&crtc->base) == work->scheduled_vblank) { |
| mutex_unlock(&fbc->lock); |
| goto retry; |
| } |
| |
| intel_fbc_hw_activate(dev_priv); |
| |
| work->scheduled = false; |
| |
| out: |
| mutex_unlock(&fbc->lock); |
| drm_crtc_vblank_put(&crtc->base); |
| } |
| |
| static void intel_fbc_schedule_activation(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| struct intel_fbc_work *work = &fbc->work; |
| |
| WARN_ON(!mutex_is_locked(&fbc->lock)); |
| |
| if (drm_crtc_vblank_get(&crtc->base)) { |
| DRM_ERROR("vblank not available for FBC on pipe %c\n", |
| pipe_name(crtc->pipe)); |
| return; |
| } |
| |
| /* It is useless to call intel_fbc_cancel_work() or cancel_work() in |
| * this function since we're not releasing fbc.lock, so it won't have an |
| * opportunity to grab it to discover that it was cancelled. So we just |
| * update the expected jiffy count. */ |
| work->scheduled = true; |
| work->scheduled_vblank = drm_crtc_vblank_count(&crtc->base); |
| drm_crtc_vblank_put(&crtc->base); |
| |
| schedule_work(&work->work); |
| } |
| |
| static void intel_fbc_deactivate(struct drm_i915_private *dev_priv) |
| { |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| |
| WARN_ON(!mutex_is_locked(&fbc->lock)); |
| |
| /* Calling cancel_work() here won't help due to the fact that the work |
| * function grabs fbc->lock. Just set scheduled to false so the work |
| * function can know it was cancelled. */ |
| fbc->work.scheduled = false; |
| |
| if (fbc->active) |
| intel_fbc_hw_deactivate(dev_priv); |
| } |
| |
| static bool multiple_pipes_ok(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; |
| struct drm_plane *primary = crtc->base.primary; |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| enum pipe pipe = crtc->pipe; |
| |
| /* Don't even bother tracking anything we don't need. */ |
| if (!no_fbc_on_multiple_pipes(dev_priv)) |
| return true; |
| |
| WARN_ON(!drm_modeset_is_locked(&primary->mutex)); |
| |
| if (to_intel_plane_state(primary->state)->visible) |
| fbc->visible_pipes_mask |= (1 << pipe); |
| else |
| fbc->visible_pipes_mask &= ~(1 << pipe); |
| |
| return (fbc->visible_pipes_mask & ~(1 << pipe)) != 0; |
| } |
| |
| static int find_compression_threshold(struct drm_i915_private *dev_priv, |
| struct drm_mm_node *node, |
| int size, |
| int fb_cpp) |
| { |
| struct i915_ggtt *ggtt = &dev_priv->ggtt; |
| int compression_threshold = 1; |
| int ret; |
| u64 end; |
| |
| /* The FBC hardware for BDW/SKL doesn't have access to the stolen |
| * reserved range size, so it always assumes the maximum (8mb) is used. |
| * If we enable FBC using a CFB on that memory range we'll get FIFO |
| * underruns, even if that range is not reserved by the BIOS. */ |
| if (IS_BROADWELL(dev_priv) || |
| IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) |
| end = ggtt->stolen_size - 8 * 1024 * 1024; |
| else |
| end = ggtt->stolen_usable_size; |
| |
| /* HACK: This code depends on what we will do in *_enable_fbc. If that |
| * code changes, this code needs to change as well. |
| * |
| * The enable_fbc code will attempt to use one of our 2 compression |
| * thresholds, therefore, in that case, we only have 1 resort. |
| */ |
| |
| /* Try to over-allocate to reduce reallocations and fragmentation. */ |
| ret = i915_gem_stolen_insert_node_in_range(dev_priv, node, size <<= 1, |
| 4096, 0, end); |
| if (ret == 0) |
| return compression_threshold; |
| |
| again: |
| /* HW's ability to limit the CFB is 1:4 */ |
| if (compression_threshold > 4 || |
| (fb_cpp == 2 && compression_threshold == 2)) |
| return 0; |
| |
| ret = i915_gem_stolen_insert_node_in_range(dev_priv, node, size >>= 1, |
| 4096, 0, end); |
| if (ret && INTEL_INFO(dev_priv)->gen <= 4) { |
| return 0; |
| } else if (ret) { |
| compression_threshold <<= 1; |
| goto again; |
| } else { |
| return compression_threshold; |
| } |
| } |
| |
| static int intel_fbc_alloc_cfb(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| struct drm_mm_node *uninitialized_var(compressed_llb); |
| int size, fb_cpp, ret; |
| |
| WARN_ON(drm_mm_node_allocated(&fbc->compressed_fb)); |
| |
| size = intel_fbc_calculate_cfb_size(dev_priv, &fbc->state_cache); |
| fb_cpp = drm_format_plane_cpp(fbc->state_cache.fb.pixel_format, 0); |
| |
| ret = find_compression_threshold(dev_priv, &fbc->compressed_fb, |
| size, fb_cpp); |
| if (!ret) |
| goto err_llb; |
| else if (ret > 1) { |
| DRM_INFO("Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.\n"); |
| |
| } |
| |
| fbc->threshold = ret; |
| |
| if (INTEL_INFO(dev_priv)->gen >= 5) |
| I915_WRITE(ILK_DPFC_CB_BASE, fbc->compressed_fb.start); |
| else if (IS_GM45(dev_priv)) { |
| I915_WRITE(DPFC_CB_BASE, fbc->compressed_fb.start); |
| } else { |
| compressed_llb = kzalloc(sizeof(*compressed_llb), GFP_KERNEL); |
| if (!compressed_llb) |
| goto err_fb; |
| |
| ret = i915_gem_stolen_insert_node(dev_priv, compressed_llb, |
| 4096, 4096); |
| if (ret) |
| goto err_fb; |
| |
| fbc->compressed_llb = compressed_llb; |
| |
| I915_WRITE(FBC_CFB_BASE, |
| dev_priv->mm.stolen_base + fbc->compressed_fb.start); |
| I915_WRITE(FBC_LL_BASE, |
| dev_priv->mm.stolen_base + compressed_llb->start); |
| } |
| |
| DRM_DEBUG_KMS("reserved %llu bytes of contiguous stolen space for FBC, threshold: %d\n", |
| fbc->compressed_fb.size, fbc->threshold); |
| |
| return 0; |
| |
| err_fb: |
| kfree(compressed_llb); |
| i915_gem_stolen_remove_node(dev_priv, &fbc->compressed_fb); |
| err_llb: |
| pr_info_once("drm: not enough stolen space for compressed buffer (need %d more bytes), disabling. Hint: you may be able to increase stolen memory size in the BIOS to avoid this.\n", size); |
| return -ENOSPC; |
| } |
| |
| static void __intel_fbc_cleanup_cfb(struct drm_i915_private *dev_priv) |
| { |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| |
| if (drm_mm_node_allocated(&fbc->compressed_fb)) |
| i915_gem_stolen_remove_node(dev_priv, &fbc->compressed_fb); |
| |
| if (fbc->compressed_llb) { |
| i915_gem_stolen_remove_node(dev_priv, fbc->compressed_llb); |
| kfree(fbc->compressed_llb); |
| } |
| } |
| |
| void intel_fbc_cleanup_cfb(struct drm_i915_private *dev_priv) |
| { |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| |
| if (!fbc_supported(dev_priv)) |
| return; |
| |
| mutex_lock(&fbc->lock); |
| __intel_fbc_cleanup_cfb(dev_priv); |
| mutex_unlock(&fbc->lock); |
| } |
| |
| static bool stride_is_valid(struct drm_i915_private *dev_priv, |
| unsigned int stride) |
| { |
| /* These should have been caught earlier. */ |
| WARN_ON(stride < 512); |
| WARN_ON((stride & (64 - 1)) != 0); |
| |
| /* Below are the additional FBC restrictions. */ |
| |
| if (IS_GEN2(dev_priv) || IS_GEN3(dev_priv)) |
| return stride == 4096 || stride == 8192; |
| |
| if (IS_GEN4(dev_priv) && !IS_G4X(dev_priv) && stride < 2048) |
| return false; |
| |
| if (stride > 16384) |
| return false; |
| |
| return true; |
| } |
| |
| static bool pixel_format_is_valid(struct drm_i915_private *dev_priv, |
| uint32_t pixel_format) |
| { |
| switch (pixel_format) { |
| case DRM_FORMAT_XRGB8888: |
| case DRM_FORMAT_XBGR8888: |
| return true; |
| case DRM_FORMAT_XRGB1555: |
| case DRM_FORMAT_RGB565: |
| /* 16bpp not supported on gen2 */ |
| if (IS_GEN2(dev_priv)) |
| return false; |
| /* WaFbcOnly1to1Ratio:ctg */ |
| if (IS_G4X(dev_priv)) |
| return false; |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| /* |
| * For some reason, the hardware tracking starts looking at whatever we |
| * programmed as the display plane base address register. It does not look at |
| * the X and Y offset registers. That's why we look at the crtc->adjusted{x,y} |
| * variables instead of just looking at the pipe/plane size. |
| */ |
| static bool intel_fbc_hw_tracking_covers_screen(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| unsigned int effective_w, effective_h, max_w, max_h; |
| |
| if (INTEL_INFO(dev_priv)->gen >= 8 || IS_HASWELL(dev_priv)) { |
| max_w = 4096; |
| max_h = 4096; |
| } else if (IS_G4X(dev_priv) || INTEL_INFO(dev_priv)->gen >= 5) { |
| max_w = 4096; |
| max_h = 2048; |
| } else { |
| max_w = 2048; |
| max_h = 1536; |
| } |
| |
| intel_fbc_get_plane_source_size(&fbc->state_cache, &effective_w, |
| &effective_h); |
| effective_w += crtc->adjusted_x; |
| effective_h += crtc->adjusted_y; |
| |
| return effective_w <= max_w && effective_h <= max_h; |
| } |
| |
| static void intel_fbc_update_state_cache(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| struct intel_fbc_state_cache *cache = &fbc->state_cache; |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| struct intel_plane_state *plane_state = |
| to_intel_plane_state(crtc->base.primary->state); |
| struct drm_framebuffer *fb = plane_state->base.fb; |
| struct drm_i915_gem_object *obj; |
| |
| WARN_ON(!drm_modeset_is_locked(&crtc->base.mutex)); |
| WARN_ON(!drm_modeset_is_locked(&crtc->base.primary->mutex)); |
| |
| cache->crtc.mode_flags = crtc_state->base.adjusted_mode.flags; |
| if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) |
| cache->crtc.hsw_bdw_pixel_rate = |
| ilk_pipe_pixel_rate(crtc_state); |
| |
| cache->plane.rotation = plane_state->base.rotation; |
| cache->plane.src_w = drm_rect_width(&plane_state->src) >> 16; |
| cache->plane.src_h = drm_rect_height(&plane_state->src) >> 16; |
| cache->plane.visible = plane_state->visible; |
| |
| if (!cache->plane.visible) |
| return; |
| |
| obj = intel_fb_obj(fb); |
| |
| /* FIXME: We lack the proper locking here, so only run this on the |
| * platforms that need. */ |
| if (INTEL_INFO(dev_priv)->gen >= 5 && INTEL_INFO(dev_priv)->gen < 7) |
| cache->fb.ilk_ggtt_offset = i915_gem_obj_ggtt_offset(obj); |
| cache->fb.pixel_format = fb->pixel_format; |
| cache->fb.stride = fb->pitches[0]; |
| cache->fb.fence_reg = obj->fence_reg; |
| cache->fb.tiling_mode = obj->tiling_mode; |
| } |
| |
| static bool intel_fbc_can_activate(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| struct intel_fbc_state_cache *cache = &fbc->state_cache; |
| |
| if (!cache->plane.visible) { |
| fbc->no_fbc_reason = "primary plane not visible"; |
| return false; |
| } |
| |
| if ((cache->crtc.mode_flags & DRM_MODE_FLAG_INTERLACE) || |
| (cache->crtc.mode_flags & DRM_MODE_FLAG_DBLSCAN)) { |
| fbc->no_fbc_reason = "incompatible mode"; |
| return false; |
| } |
| |
| if (!intel_fbc_hw_tracking_covers_screen(crtc)) { |
| fbc->no_fbc_reason = "mode too large for compression"; |
| return false; |
| } |
| |
| /* The use of a CPU fence is mandatory in order to detect writes |
| * by the CPU to the scanout and trigger updates to the FBC. |
| */ |
| if (cache->fb.tiling_mode != I915_TILING_X || |
| cache->fb.fence_reg == I915_FENCE_REG_NONE) { |
| fbc->no_fbc_reason = "framebuffer not tiled or fenced"; |
| return false; |
| } |
| if (INTEL_INFO(dev_priv)->gen <= 4 && !IS_G4X(dev_priv) && |
| cache->plane.rotation != BIT(DRM_ROTATE_0)) { |
| fbc->no_fbc_reason = "rotation unsupported"; |
| return false; |
| } |
| |
| if (!stride_is_valid(dev_priv, cache->fb.stride)) { |
| fbc->no_fbc_reason = "framebuffer stride not supported"; |
| return false; |
| } |
| |
| if (!pixel_format_is_valid(dev_priv, cache->fb.pixel_format)) { |
| fbc->no_fbc_reason = "pixel format is invalid"; |
| return false; |
| } |
| |
| /* WaFbcExceedCdClockThreshold:hsw,bdw */ |
| if ((IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) && |
| cache->crtc.hsw_bdw_pixel_rate >= dev_priv->cdclk_freq * 95 / 100) { |
| fbc->no_fbc_reason = "pixel rate is too big"; |
| return false; |
| } |
| |
| /* It is possible for the required CFB size change without a |
| * crtc->disable + crtc->enable since it is possible to change the |
| * stride without triggering a full modeset. Since we try to |
| * over-allocate the CFB, there's a chance we may keep FBC enabled even |
| * if this happens, but if we exceed the current CFB size we'll have to |
| * disable FBC. Notice that it would be possible to disable FBC, wait |
| * for a frame, free the stolen node, then try to reenable FBC in case |
| * we didn't get any invalidate/deactivate calls, but this would require |
| * a lot of tracking just for a specific case. If we conclude it's an |
| * important case, we can implement it later. */ |
| if (intel_fbc_calculate_cfb_size(dev_priv, &fbc->state_cache) > |
| fbc->compressed_fb.size * fbc->threshold) { |
| fbc->no_fbc_reason = "CFB requirements changed"; |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static bool intel_fbc_can_choose(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| bool enable_by_default = IS_BROADWELL(dev_priv); |
| |
| if (intel_vgpu_active(dev_priv->dev)) { |
| fbc->no_fbc_reason = "VGPU is active"; |
| return false; |
| } |
| |
| if (i915.enable_fbc < 0 && !enable_by_default) { |
| fbc->no_fbc_reason = "disabled per chip default"; |
| return false; |
| } |
| |
| if (!i915.enable_fbc) { |
| fbc->no_fbc_reason = "disabled per module param"; |
| return false; |
| } |
| |
| if (fbc_on_pipe_a_only(dev_priv) && crtc->pipe != PIPE_A) { |
| fbc->no_fbc_reason = "no enabled pipes can have FBC"; |
| return false; |
| } |
| |
| if (fbc_on_plane_a_only(dev_priv) && crtc->plane != PLANE_A) { |
| fbc->no_fbc_reason = "no enabled planes can have FBC"; |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static void intel_fbc_get_reg_params(struct intel_crtc *crtc, |
| struct intel_fbc_reg_params *params) |
| { |
| struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| struct intel_fbc_state_cache *cache = &fbc->state_cache; |
| |
| /* Since all our fields are integer types, use memset here so the |
| * comparison function can rely on memcmp because the padding will be |
| * zero. */ |
| memset(params, 0, sizeof(*params)); |
| |
| params->crtc.pipe = crtc->pipe; |
| params->crtc.plane = crtc->plane; |
| params->crtc.fence_y_offset = get_crtc_fence_y_offset(crtc); |
| |
| params->fb.pixel_format = cache->fb.pixel_format; |
| params->fb.stride = cache->fb.stride; |
| params->fb.fence_reg = cache->fb.fence_reg; |
| |
| params->cfb_size = intel_fbc_calculate_cfb_size(dev_priv, cache); |
| |
| params->fb.ggtt_offset = cache->fb.ilk_ggtt_offset; |
| } |
| |
| static bool intel_fbc_reg_params_equal(struct intel_fbc_reg_params *params1, |
| struct intel_fbc_reg_params *params2) |
| { |
| /* We can use this since intel_fbc_get_reg_params() does a memset. */ |
| return memcmp(params1, params2, sizeof(*params1)) == 0; |
| } |
| |
| void intel_fbc_pre_update(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| |
| if (!fbc_supported(dev_priv)) |
| return; |
| |
| mutex_lock(&fbc->lock); |
| |
| if (!multiple_pipes_ok(crtc)) { |
| fbc->no_fbc_reason = "more than one pipe active"; |
| goto deactivate; |
| } |
| |
| if (!fbc->enabled || fbc->crtc != crtc) |
| goto unlock; |
| |
| intel_fbc_update_state_cache(crtc); |
| |
| deactivate: |
| intel_fbc_deactivate(dev_priv); |
| unlock: |
| mutex_unlock(&fbc->lock); |
| } |
| |
| static void __intel_fbc_post_update(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| struct intel_fbc_reg_params old_params; |
| |
| WARN_ON(!mutex_is_locked(&fbc->lock)); |
| |
| if (!fbc->enabled || fbc->crtc != crtc) |
| return; |
| |
| if (!intel_fbc_can_activate(crtc)) { |
| WARN_ON(fbc->active); |
| return; |
| } |
| |
| old_params = fbc->params; |
| intel_fbc_get_reg_params(crtc, &fbc->params); |
| |
| /* If the scanout has not changed, don't modify the FBC settings. |
| * Note that we make the fundamental assumption that the fb->obj |
| * cannot be unpinned (and have its GTT offset and fence revoked) |
| * without first being decoupled from the scanout and FBC disabled. |
| */ |
| if (fbc->active && |
| intel_fbc_reg_params_equal(&old_params, &fbc->params)) |
| return; |
| |
| intel_fbc_deactivate(dev_priv); |
| intel_fbc_schedule_activation(crtc); |
| fbc->no_fbc_reason = "FBC enabled (active or scheduled)"; |
| } |
| |
| void intel_fbc_post_update(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| |
| if (!fbc_supported(dev_priv)) |
| return; |
| |
| mutex_lock(&fbc->lock); |
| __intel_fbc_post_update(crtc); |
| mutex_unlock(&fbc->lock); |
| } |
| |
| static unsigned int intel_fbc_get_frontbuffer_bit(struct intel_fbc *fbc) |
| { |
| if (fbc->enabled) |
| return to_intel_plane(fbc->crtc->base.primary)->frontbuffer_bit; |
| else |
| return fbc->possible_framebuffer_bits; |
| } |
| |
| void intel_fbc_invalidate(struct drm_i915_private *dev_priv, |
| unsigned int frontbuffer_bits, |
| enum fb_op_origin origin) |
| { |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| |
| if (!fbc_supported(dev_priv)) |
| return; |
| |
| if (origin == ORIGIN_GTT || origin == ORIGIN_FLIP) |
| return; |
| |
| mutex_lock(&fbc->lock); |
| |
| fbc->busy_bits |= intel_fbc_get_frontbuffer_bit(fbc) & frontbuffer_bits; |
| |
| if (fbc->enabled && fbc->busy_bits) |
| intel_fbc_deactivate(dev_priv); |
| |
| mutex_unlock(&fbc->lock); |
| } |
| |
| void intel_fbc_flush(struct drm_i915_private *dev_priv, |
| unsigned int frontbuffer_bits, enum fb_op_origin origin) |
| { |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| |
| if (!fbc_supported(dev_priv)) |
| return; |
| |
| if (origin == ORIGIN_GTT || origin == ORIGIN_FLIP) |
| return; |
| |
| mutex_lock(&fbc->lock); |
| |
| fbc->busy_bits &= ~frontbuffer_bits; |
| |
| if (!fbc->busy_bits && fbc->enabled && |
| (frontbuffer_bits & intel_fbc_get_frontbuffer_bit(fbc))) { |
| if (fbc->active) |
| intel_fbc_recompress(dev_priv); |
| else |
| __intel_fbc_post_update(fbc->crtc); |
| } |
| |
| mutex_unlock(&fbc->lock); |
| } |
| |
| /** |
| * intel_fbc_choose_crtc - select a CRTC to enable FBC on |
| * @dev_priv: i915 device instance |
| * @state: the atomic state structure |
| * |
| * This function looks at the proposed state for CRTCs and planes, then chooses |
| * which pipe is going to have FBC by setting intel_crtc_state->enable_fbc to |
| * true. |
| * |
| * Later, intel_fbc_enable is going to look for state->enable_fbc and then maybe |
| * enable FBC for the chosen CRTC. If it does, it will set dev_priv->fbc.crtc. |
| */ |
| void intel_fbc_choose_crtc(struct drm_i915_private *dev_priv, |
| struct drm_atomic_state *state) |
| { |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *crtc_state; |
| struct drm_plane *plane; |
| struct drm_plane_state *plane_state; |
| bool fbc_crtc_present = false; |
| int i, j; |
| |
| mutex_lock(&fbc->lock); |
| |
| for_each_crtc_in_state(state, crtc, crtc_state, i) { |
| if (fbc->crtc == to_intel_crtc(crtc)) { |
| fbc_crtc_present = true; |
| break; |
| } |
| } |
| /* This atomic commit doesn't involve the CRTC currently tied to FBC. */ |
| if (!fbc_crtc_present && fbc->crtc != NULL) |
| goto out; |
| |
| /* Simply choose the first CRTC that is compatible and has a visible |
| * plane. We could go for fancier schemes such as checking the plane |
| * size, but this would just affect the few platforms that don't tie FBC |
| * to pipe or plane A. */ |
| for_each_plane_in_state(state, plane, plane_state, i) { |
| struct intel_plane_state *intel_plane_state = |
| to_intel_plane_state(plane_state); |
| |
| if (!intel_plane_state->visible) |
| continue; |
| |
| for_each_crtc_in_state(state, crtc, crtc_state, j) { |
| struct intel_crtc_state *intel_crtc_state = |
| to_intel_crtc_state(crtc_state); |
| |
| if (plane_state->crtc != crtc) |
| continue; |
| |
| if (!intel_fbc_can_choose(to_intel_crtc(crtc))) |
| break; |
| |
| intel_crtc_state->enable_fbc = true; |
| goto out; |
| } |
| } |
| |
| out: |
| mutex_unlock(&fbc->lock); |
| } |
| |
| /** |
| * intel_fbc_enable: tries to enable FBC on the CRTC |
| * @crtc: the CRTC |
| * |
| * This function checks if the given CRTC was chosen for FBC, then enables it if |
| * possible. Notice that it doesn't activate FBC. It is valid to call |
| * intel_fbc_enable multiple times for the same pipe without an |
| * intel_fbc_disable in the middle, as long as it is deactivated. |
| */ |
| void intel_fbc_enable(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| |
| if (!fbc_supported(dev_priv)) |
| return; |
| |
| mutex_lock(&fbc->lock); |
| |
| if (fbc->enabled) { |
| WARN_ON(fbc->crtc == NULL); |
| if (fbc->crtc == crtc) { |
| WARN_ON(!crtc->config->enable_fbc); |
| WARN_ON(fbc->active); |
| } |
| goto out; |
| } |
| |
| if (!crtc->config->enable_fbc) |
| goto out; |
| |
| WARN_ON(fbc->active); |
| WARN_ON(fbc->crtc != NULL); |
| |
| intel_fbc_update_state_cache(crtc); |
| if (intel_fbc_alloc_cfb(crtc)) { |
| fbc->no_fbc_reason = "not enough stolen memory"; |
| goto out; |
| } |
| |
| DRM_DEBUG_KMS("Enabling FBC on pipe %c\n", pipe_name(crtc->pipe)); |
| fbc->no_fbc_reason = "FBC enabled but not active yet\n"; |
| |
| fbc->enabled = true; |
| fbc->crtc = crtc; |
| out: |
| mutex_unlock(&fbc->lock); |
| } |
| |
| /** |
| * __intel_fbc_disable - disable FBC |
| * @dev_priv: i915 device instance |
| * |
| * This is the low level function that actually disables FBC. Callers should |
| * grab the FBC lock. |
| */ |
| static void __intel_fbc_disable(struct drm_i915_private *dev_priv) |
| { |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| struct intel_crtc *crtc = fbc->crtc; |
| |
| WARN_ON(!mutex_is_locked(&fbc->lock)); |
| WARN_ON(!fbc->enabled); |
| WARN_ON(fbc->active); |
| WARN_ON(crtc->active); |
| |
| DRM_DEBUG_KMS("Disabling FBC on pipe %c\n", pipe_name(crtc->pipe)); |
| |
| __intel_fbc_cleanup_cfb(dev_priv); |
| |
| fbc->enabled = false; |
| fbc->crtc = NULL; |
| } |
| |
| /** |
| * intel_fbc_disable - disable FBC if it's associated with crtc |
| * @crtc: the CRTC |
| * |
| * This function disables FBC if it's associated with the provided CRTC. |
| */ |
| void intel_fbc_disable(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| |
| if (!fbc_supported(dev_priv)) |
| return; |
| |
| mutex_lock(&fbc->lock); |
| if (fbc->crtc == crtc) { |
| WARN_ON(!fbc->enabled); |
| WARN_ON(fbc->active); |
| __intel_fbc_disable(dev_priv); |
| } |
| mutex_unlock(&fbc->lock); |
| |
| cancel_work_sync(&fbc->work.work); |
| } |
| |
| /** |
| * intel_fbc_global_disable - globally disable FBC |
| * @dev_priv: i915 device instance |
| * |
| * This function disables FBC regardless of which CRTC is associated with it. |
| */ |
| void intel_fbc_global_disable(struct drm_i915_private *dev_priv) |
| { |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| |
| if (!fbc_supported(dev_priv)) |
| return; |
| |
| mutex_lock(&fbc->lock); |
| if (fbc->enabled) |
| __intel_fbc_disable(dev_priv); |
| mutex_unlock(&fbc->lock); |
| |
| cancel_work_sync(&fbc->work.work); |
| } |
| |
| /** |
| * intel_fbc_init_pipe_state - initialize FBC's CRTC visibility tracking |
| * @dev_priv: i915 device instance |
| * |
| * The FBC code needs to track CRTC visibility since the older platforms can't |
| * have FBC enabled while multiple pipes are used. This function does the |
| * initial setup at driver load to make sure FBC is matching the real hardware. |
| */ |
| void intel_fbc_init_pipe_state(struct drm_i915_private *dev_priv) |
| { |
| struct intel_crtc *crtc; |
| |
| /* Don't even bother tracking anything if we don't need. */ |
| if (!no_fbc_on_multiple_pipes(dev_priv)) |
| return; |
| |
| for_each_intel_crtc(dev_priv->dev, crtc) |
| if (intel_crtc_active(&crtc->base) && |
| to_intel_plane_state(crtc->base.primary->state)->visible) |
| dev_priv->fbc.visible_pipes_mask |= (1 << crtc->pipe); |
| } |
| |
| /** |
| * intel_fbc_init - Initialize FBC |
| * @dev_priv: the i915 device |
| * |
| * This function might be called during PM init process. |
| */ |
| void intel_fbc_init(struct drm_i915_private *dev_priv) |
| { |
| struct intel_fbc *fbc = &dev_priv->fbc; |
| enum pipe pipe; |
| |
| INIT_WORK(&fbc->work.work, intel_fbc_work_fn); |
| mutex_init(&fbc->lock); |
| fbc->enabled = false; |
| fbc->active = false; |
| fbc->work.scheduled = false; |
| |
| if (!HAS_FBC(dev_priv)) { |
| fbc->no_fbc_reason = "unsupported by this chipset"; |
| return; |
| } |
| |
| for_each_pipe(dev_priv, pipe) { |
| fbc->possible_framebuffer_bits |= |
| INTEL_FRONTBUFFER_PRIMARY(pipe); |
| |
| if (fbc_on_pipe_a_only(dev_priv)) |
| break; |
| } |
| |
| /* This value was pulled out of someone's hat */ |
| if (INTEL_INFO(dev_priv)->gen <= 4 && !IS_GM45(dev_priv)) |
| I915_WRITE(FBC_CONTROL, 500 << FBC_CTL_INTERVAL_SHIFT); |
| |
| /* We still don't have any sort of hardware state readout for FBC, so |
| * deactivate it in case the BIOS activated it to make sure software |
| * matches the hardware state. */ |
| if (intel_fbc_hw_is_active(dev_priv)) |
| intel_fbc_hw_deactivate(dev_priv); |
| } |