blob: 1acb0c72d9231d980080af3acbae7120b720c67c [file] [log] [blame]
/*
* PowerNV setup code.
*
* Copyright 2011 IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#undef DEBUG
#include <linux/cpu.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/interrupt.h>
#include <linux/bug.h>
#include <linux/pci.h>
#include <linux/cpufreq.h>
#include <asm/machdep.h>
#include <asm/firmware.h>
#include <asm/xics.h>
#include <asm/opal.h>
#include <asm/kexec.h>
#include <asm/smp.h>
#include "powernv.h"
static void __init pnv_setup_arch(void)
{
set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT);
/* Initialize SMP */
pnv_smp_init();
/* Setup PCI */
pnv_pci_init();
/* Setup RTC and NVRAM callbacks */
if (firmware_has_feature(FW_FEATURE_OPAL))
opal_nvram_init();
/* Enable NAP mode */
powersave_nap = 1;
/* XXX PMCS */
}
static void __init pnv_init_early(void)
{
/*
* Initialize the LPC bus now so that legacy serial
* ports can be found on it
*/
opal_lpc_init();
#ifdef CONFIG_HVC_OPAL
if (firmware_has_feature(FW_FEATURE_OPAL))
hvc_opal_init_early();
else
#endif
add_preferred_console("hvc", 0, NULL);
}
static void __init pnv_init_IRQ(void)
{
xics_init();
WARN_ON(!ppc_md.get_irq);
}
static void pnv_show_cpuinfo(struct seq_file *m)
{
struct device_node *root;
const char *model = "";
root = of_find_node_by_path("/");
if (root)
model = of_get_property(root, "model", NULL);
seq_printf(m, "machine\t\t: PowerNV %s\n", model);
if (firmware_has_feature(FW_FEATURE_OPAL))
seq_printf(m, "firmware\t: OPAL\n");
else
seq_printf(m, "firmware\t: BML\n");
of_node_put(root);
}
static void pnv_prepare_going_down(void)
{
/*
* Disable all notifiers from OPAL, we can't
* service interrupts anymore anyway
*/
opal_event_shutdown();
/* Soft disable interrupts */
local_irq_disable();
/*
* Return secondary CPUs to firwmare if a flash update
* is pending otherwise we will get all sort of error
* messages about CPU being stuck etc.. This will also
* have the side effect of hard disabling interrupts so
* past this point, the kernel is effectively dead.
*/
opal_flash_term_callback();
}
static void __noreturn pnv_restart(char *cmd)
{
long rc = OPAL_BUSY;
pnv_prepare_going_down();
while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
rc = opal_cec_reboot();
if (rc == OPAL_BUSY_EVENT)
opal_poll_events(NULL);
else
mdelay(10);
}
for (;;)
opal_poll_events(NULL);
}
static void __noreturn pnv_power_off(void)
{
long rc = OPAL_BUSY;
pnv_prepare_going_down();
while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
rc = opal_cec_power_down(0);
if (rc == OPAL_BUSY_EVENT)
opal_poll_events(NULL);
else
mdelay(10);
}
for (;;)
opal_poll_events(NULL);
}
static void __noreturn pnv_halt(void)
{
pnv_power_off();
}
static void pnv_progress(char *s, unsigned short hex)
{
}
static void pnv_shutdown(void)
{
/* Let the PCI code clear up IODA tables */
pnv_pci_shutdown();
/*
* Stop OPAL activity: Unregister all OPAL interrupts so they
* don't fire up while we kexec and make sure all potentially
* DMA'ing ops are complete (such as dump retrieval).
*/
opal_shutdown();
}
#ifdef CONFIG_KEXEC
static void pnv_kexec_wait_secondaries_down(void)
{
int my_cpu, i, notified = -1;
my_cpu = get_cpu();
for_each_online_cpu(i) {
uint8_t status;
int64_t rc, timeout = 1000;
if (i == my_cpu)
continue;
for (;;) {
rc = opal_query_cpu_status(get_hard_smp_processor_id(i),
&status);
if (rc != OPAL_SUCCESS || status != OPAL_THREAD_STARTED)
break;
barrier();
if (i != notified) {
printk(KERN_INFO "kexec: waiting for cpu %d "
"(physical %d) to enter OPAL\n",
i, paca[i].hw_cpu_id);
notified = i;
}
/*
* On crash secondaries might be unreachable or hung,
* so timeout if we've waited too long
* */
mdelay(1);
if (timeout-- == 0) {
printk(KERN_ERR "kexec: timed out waiting for "
"cpu %d (physical %d) to enter OPAL\n",
i, paca[i].hw_cpu_id);
break;
}
}
}
}
static void pnv_kexec_cpu_down(int crash_shutdown, int secondary)
{
xics_kexec_teardown_cpu(secondary);
/* On OPAL, we return all CPUs to firmware */
if (!firmware_has_feature(FW_FEATURE_OPAL))
return;
if (secondary) {
/* Return secondary CPUs to firmware on OPAL v3 */
mb();
get_paca()->kexec_state = KEXEC_STATE_REAL_MODE;
mb();
/* Return the CPU to OPAL */
opal_return_cpu();
} else {
/* Primary waits for the secondaries to have reached OPAL */
pnv_kexec_wait_secondaries_down();
/*
* We might be running as little-endian - now that interrupts
* are disabled, reset the HILE bit to big-endian so we don't
* take interrupts in the wrong endian later
*/
opal_reinit_cpus(OPAL_REINIT_CPUS_HILE_BE);
}
}
#endif /* CONFIG_KEXEC */
#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
static unsigned long pnv_memory_block_size(void)
{
return 256UL * 1024 * 1024;
}
#endif
static void __init pnv_setup_machdep_opal(void)
{
ppc_md.get_boot_time = opal_get_boot_time;
ppc_md.restart = pnv_restart;
pm_power_off = pnv_power_off;
ppc_md.halt = pnv_halt;
ppc_md.machine_check_exception = opal_machine_check;
ppc_md.mce_check_early_recovery = opal_mce_check_early_recovery;
ppc_md.hmi_exception_early = opal_hmi_exception_early;
ppc_md.handle_hmi_exception = opal_handle_hmi_exception;
}
static int __init pnv_probe(void)
{
unsigned long root = of_get_flat_dt_root();
if (!of_flat_dt_is_compatible(root, "ibm,powernv"))
return 0;
hpte_init_native();
if (firmware_has_feature(FW_FEATURE_OPAL))
pnv_setup_machdep_opal();
pr_debug("PowerNV detected !\n");
return 1;
}
/*
* Returns the cpu frequency for 'cpu' in Hz. This is used by
* /proc/cpuinfo
*/
static unsigned long pnv_get_proc_freq(unsigned int cpu)
{
unsigned long ret_freq;
ret_freq = cpufreq_quick_get(cpu) * 1000ul;
/*
* If the backend cpufreq driver does not exist,
* then fallback to old way of reporting the clockrate.
*/
if (!ret_freq)
ret_freq = ppc_proc_freq;
return ret_freq;
}
define_machine(powernv) {
.name = "PowerNV",
.probe = pnv_probe,
.init_early = pnv_init_early,
.setup_arch = pnv_setup_arch,
.init_IRQ = pnv_init_IRQ,
.show_cpuinfo = pnv_show_cpuinfo,
.get_proc_freq = pnv_get_proc_freq,
.progress = pnv_progress,
.machine_shutdown = pnv_shutdown,
.power_save = power7_idle,
.calibrate_decr = generic_calibrate_decr,
#ifdef CONFIG_KEXEC
.kexec_cpu_down = pnv_kexec_cpu_down,
#endif
#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
.memory_block_size = pnv_memory_block_size,
#endif
};