| /* |
| * Renesas USB driver |
| * |
| * Copyright (C) 2011 Renesas Solutions Corp. |
| * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| */ |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include "common.h" |
| #include "pipe.h" |
| |
| /* |
| * macros |
| */ |
| #define usbhsp_addr_offset(p) ((usbhs_pipe_number(p) - 1) * 2) |
| |
| #define usbhsp_flags_set(p, f) ((p)->flags |= USBHS_PIPE_FLAGS_##f) |
| #define usbhsp_flags_clr(p, f) ((p)->flags &= ~USBHS_PIPE_FLAGS_##f) |
| #define usbhsp_flags_has(p, f) ((p)->flags & USBHS_PIPE_FLAGS_##f) |
| #define usbhsp_flags_init(p) do {(p)->flags = 0; } while (0) |
| |
| /* |
| * for debug |
| */ |
| static char *usbhsp_pipe_name[] = { |
| [USB_ENDPOINT_XFER_CONTROL] = "DCP", |
| [USB_ENDPOINT_XFER_BULK] = "BULK", |
| [USB_ENDPOINT_XFER_INT] = "INT", |
| [USB_ENDPOINT_XFER_ISOC] = "ISO", |
| }; |
| |
| char *usbhs_pipe_name(struct usbhs_pipe *pipe) |
| { |
| return usbhsp_pipe_name[usbhs_pipe_type(pipe)]; |
| } |
| |
| static struct renesas_usbhs_driver_pipe_config |
| *usbhsp_get_pipe_config(struct usbhs_priv *priv, int pipe_num) |
| { |
| struct renesas_usbhs_driver_pipe_config *pipe_configs = |
| usbhs_get_dparam(priv, pipe_configs); |
| |
| return &pipe_configs[pipe_num]; |
| } |
| |
| /* |
| * DCPCTR/PIPEnCTR functions |
| */ |
| static void usbhsp_pipectrl_set(struct usbhs_pipe *pipe, u16 mask, u16 val) |
| { |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| int offset = usbhsp_addr_offset(pipe); |
| |
| if (usbhs_pipe_is_dcp(pipe)) |
| usbhs_bset(priv, DCPCTR, mask, val); |
| else |
| usbhs_bset(priv, PIPEnCTR + offset, mask, val); |
| } |
| |
| static u16 usbhsp_pipectrl_get(struct usbhs_pipe *pipe) |
| { |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| int offset = usbhsp_addr_offset(pipe); |
| |
| if (usbhs_pipe_is_dcp(pipe)) |
| return usbhs_read(priv, DCPCTR); |
| else |
| return usbhs_read(priv, PIPEnCTR + offset); |
| } |
| |
| /* |
| * DCP/PIPE functions |
| */ |
| static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe, |
| u16 dcp_reg, u16 pipe_reg, |
| u16 mask, u16 val) |
| { |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| |
| if (usbhs_pipe_is_dcp(pipe)) |
| usbhs_bset(priv, dcp_reg, mask, val); |
| else |
| usbhs_bset(priv, pipe_reg, mask, val); |
| } |
| |
| static u16 __usbhsp_pipe_xxx_get(struct usbhs_pipe *pipe, |
| u16 dcp_reg, u16 pipe_reg) |
| { |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| |
| if (usbhs_pipe_is_dcp(pipe)) |
| return usbhs_read(priv, dcp_reg); |
| else |
| return usbhs_read(priv, pipe_reg); |
| } |
| |
| /* |
| * DCPCFG/PIPECFG functions |
| */ |
| static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val) |
| { |
| __usbhsp_pipe_xxx_set(pipe, DCPCFG, PIPECFG, mask, val); |
| } |
| |
| static u16 usbhsp_pipe_cfg_get(struct usbhs_pipe *pipe) |
| { |
| return __usbhsp_pipe_xxx_get(pipe, DCPCFG, PIPECFG); |
| } |
| |
| /* |
| * PIPEnTRN/PIPEnTRE functions |
| */ |
| static void usbhsp_pipe_trn_set(struct usbhs_pipe *pipe, u16 mask, u16 val) |
| { |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| struct device *dev = usbhs_priv_to_dev(priv); |
| int num = usbhs_pipe_number(pipe); |
| u16 reg; |
| |
| /* |
| * It is impossible to calculate address, |
| * since PIPEnTRN addresses were mapped randomly. |
| */ |
| #define CASE_PIPExTRN(a) \ |
| case 0x ## a: \ |
| reg = PIPE ## a ## TRN; \ |
| break; |
| |
| switch (num) { |
| CASE_PIPExTRN(1); |
| CASE_PIPExTRN(2); |
| CASE_PIPExTRN(3); |
| CASE_PIPExTRN(4); |
| CASE_PIPExTRN(5); |
| CASE_PIPExTRN(B); |
| CASE_PIPExTRN(C); |
| CASE_PIPExTRN(D); |
| CASE_PIPExTRN(E); |
| CASE_PIPExTRN(F); |
| CASE_PIPExTRN(9); |
| CASE_PIPExTRN(A); |
| default: |
| dev_err(dev, "unknown pipe (%d)\n", num); |
| return; |
| } |
| __usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val); |
| } |
| |
| static void usbhsp_pipe_tre_set(struct usbhs_pipe *pipe, u16 mask, u16 val) |
| { |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| struct device *dev = usbhs_priv_to_dev(priv); |
| int num = usbhs_pipe_number(pipe); |
| u16 reg; |
| |
| /* |
| * It is impossible to calculate address, |
| * since PIPEnTRE addresses were mapped randomly. |
| */ |
| #define CASE_PIPExTRE(a) \ |
| case 0x ## a: \ |
| reg = PIPE ## a ## TRE; \ |
| break; |
| |
| switch (num) { |
| CASE_PIPExTRE(1); |
| CASE_PIPExTRE(2); |
| CASE_PIPExTRE(3); |
| CASE_PIPExTRE(4); |
| CASE_PIPExTRE(5); |
| CASE_PIPExTRE(B); |
| CASE_PIPExTRE(C); |
| CASE_PIPExTRE(D); |
| CASE_PIPExTRE(E); |
| CASE_PIPExTRE(F); |
| CASE_PIPExTRE(9); |
| CASE_PIPExTRE(A); |
| default: |
| dev_err(dev, "unknown pipe (%d)\n", num); |
| return; |
| } |
| |
| __usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val); |
| } |
| |
| /* |
| * PIPEBUF |
| */ |
| static void usbhsp_pipe_buf_set(struct usbhs_pipe *pipe, u16 mask, u16 val) |
| { |
| if (usbhs_pipe_is_dcp(pipe)) |
| return; |
| |
| __usbhsp_pipe_xxx_set(pipe, 0, PIPEBUF, mask, val); |
| } |
| |
| /* |
| * DCPMAXP/PIPEMAXP |
| */ |
| static void usbhsp_pipe_maxp_set(struct usbhs_pipe *pipe, u16 mask, u16 val) |
| { |
| __usbhsp_pipe_xxx_set(pipe, DCPMAXP, PIPEMAXP, mask, val); |
| } |
| |
| /* |
| * pipe control functions |
| */ |
| static void usbhsp_pipe_select(struct usbhs_pipe *pipe) |
| { |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| |
| /* |
| * On pipe, this is necessary before |
| * accesses to below registers. |
| * |
| * PIPESEL : usbhsp_pipe_select |
| * PIPECFG : usbhsp_pipe_cfg_xxx |
| * PIPEBUF : usbhsp_pipe_buf_xxx |
| * PIPEMAXP : usbhsp_pipe_maxp_xxx |
| * PIPEPERI |
| */ |
| |
| /* |
| * if pipe is dcp, no pipe is selected. |
| * it is no problem, because dcp have its register |
| */ |
| usbhs_write(priv, PIPESEL, 0xF & usbhs_pipe_number(pipe)); |
| } |
| |
| static int usbhsp_pipe_barrier(struct usbhs_pipe *pipe) |
| { |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| int timeout = 1024; |
| u16 mask = usbhs_mod_is_host(priv) ? (CSSTS | PID_MASK) : PID_MASK; |
| |
| /* |
| * make sure.... |
| * |
| * Modify these bits when CSSTS = 0, PID = NAK, and no pipe number is |
| * specified by the CURPIPE bits. |
| * When changing the setting of this bit after changing |
| * the PID bits for the selected pipe from BUF to NAK, |
| * check that CSSTS = 0 and PBUSY = 0. |
| */ |
| |
| /* |
| * CURPIPE bit = 0 |
| * |
| * see also |
| * "Operation" |
| * - "Pipe Control" |
| * - "Pipe Control Registers Switching Procedure" |
| */ |
| usbhs_write(priv, CFIFOSEL, 0); |
| usbhs_pipe_disable(pipe); |
| |
| do { |
| if (!(usbhsp_pipectrl_get(pipe) & mask)) |
| return 0; |
| |
| udelay(10); |
| |
| } while (timeout--); |
| |
| return -EBUSY; |
| } |
| |
| int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe) |
| { |
| u16 val; |
| |
| val = usbhsp_pipectrl_get(pipe); |
| if (val & BSTS) |
| return 0; |
| |
| return -EBUSY; |
| } |
| |
| /* |
| * PID ctrl |
| */ |
| static void __usbhsp_pid_try_nak_if_stall(struct usbhs_pipe *pipe) |
| { |
| u16 pid = usbhsp_pipectrl_get(pipe); |
| |
| pid &= PID_MASK; |
| |
| /* |
| * see |
| * "Pipe n Control Register" - "PID" |
| */ |
| switch (pid) { |
| case PID_STALL11: |
| usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10); |
| /* fall-through */ |
| case PID_STALL10: |
| usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK); |
| } |
| } |
| |
| void usbhs_pipe_disable(struct usbhs_pipe *pipe) |
| { |
| int timeout = 1024; |
| u16 val; |
| |
| /* see "Pipe n Control Register" - "PID" */ |
| __usbhsp_pid_try_nak_if_stall(pipe); |
| |
| usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK); |
| |
| do { |
| val = usbhsp_pipectrl_get(pipe); |
| val &= PBUSY; |
| if (!val) |
| break; |
| |
| udelay(10); |
| } while (timeout--); |
| } |
| |
| void usbhs_pipe_enable(struct usbhs_pipe *pipe) |
| { |
| /* see "Pipe n Control Register" - "PID" */ |
| __usbhsp_pid_try_nak_if_stall(pipe); |
| |
| usbhsp_pipectrl_set(pipe, PID_MASK, PID_BUF); |
| } |
| |
| void usbhs_pipe_stall(struct usbhs_pipe *pipe) |
| { |
| u16 pid = usbhsp_pipectrl_get(pipe); |
| |
| pid &= PID_MASK; |
| |
| /* |
| * see |
| * "Pipe n Control Register" - "PID" |
| */ |
| switch (pid) { |
| case PID_NAK: |
| usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10); |
| break; |
| case PID_BUF: |
| usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL11); |
| break; |
| } |
| } |
| |
| int usbhs_pipe_is_stall(struct usbhs_pipe *pipe) |
| { |
| u16 pid = usbhsp_pipectrl_get(pipe) & PID_MASK; |
| |
| return (int)(pid == PID_STALL10 || pid == PID_STALL11); |
| } |
| |
| void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len) |
| { |
| if (!usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) |
| return; |
| |
| /* |
| * clear and disable transfer counter for IN/OUT pipe |
| */ |
| usbhsp_pipe_tre_set(pipe, TRCLR | TRENB, TRCLR); |
| |
| /* |
| * Only IN direction bulk pipe can use transfer count. |
| * Without using this function, |
| * received data will break if it was large data size. |
| * see PIPEnTRN/PIPEnTRE for detail |
| */ |
| if (usbhs_pipe_is_dir_in(pipe)) { |
| int maxp = usbhs_pipe_get_maxpacket(pipe); |
| |
| usbhsp_pipe_trn_set(pipe, 0xffff, DIV_ROUND_UP(len, maxp)); |
| usbhsp_pipe_tre_set(pipe, TRENB, TRENB); /* enable */ |
| } |
| } |
| |
| |
| /* |
| * pipe setup |
| */ |
| static int usbhsp_setup_pipecfg(struct usbhs_pipe *pipe, int is_host, |
| int dir_in, u16 *pipecfg) |
| { |
| u16 type = 0; |
| u16 bfre = 0; |
| u16 dblb = 0; |
| u16 cntmd = 0; |
| u16 dir = 0; |
| u16 epnum = 0; |
| u16 shtnak = 0; |
| u16 type_array[] = { |
| [USB_ENDPOINT_XFER_BULK] = TYPE_BULK, |
| [USB_ENDPOINT_XFER_INT] = TYPE_INT, |
| [USB_ENDPOINT_XFER_ISOC] = TYPE_ISO, |
| }; |
| |
| if (usbhs_pipe_is_dcp(pipe)) |
| return -EINVAL; |
| |
| /* |
| * PIPECFG |
| * |
| * see |
| * - "Register Descriptions" - "PIPECFG" register |
| * - "Features" - "Pipe configuration" |
| * - "Operation" - "Pipe Control" |
| */ |
| |
| /* TYPE */ |
| type = type_array[usbhs_pipe_type(pipe)]; |
| |
| /* BFRE */ |
| if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC) || |
| usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) |
| bfre = 0; /* FIXME */ |
| |
| /* DBLB: see usbhs_pipe_config_update() */ |
| |
| /* CNTMD */ |
| if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) |
| cntmd = 0; /* FIXME */ |
| |
| /* DIR */ |
| if (dir_in) |
| usbhsp_flags_set(pipe, IS_DIR_HOST); |
| |
| if (!!is_host ^ !!dir_in) |
| dir |= DIR_OUT; |
| |
| if (!dir) |
| usbhsp_flags_set(pipe, IS_DIR_IN); |
| |
| /* SHTNAK */ |
| if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK) && |
| !dir) |
| shtnak = SHTNAK; |
| |
| /* EPNUM */ |
| epnum = 0; /* see usbhs_pipe_config_update() */ |
| *pipecfg = type | |
| bfre | |
| dblb | |
| cntmd | |
| dir | |
| shtnak | |
| epnum; |
| return 0; |
| } |
| |
| static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe) |
| { |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| struct device *dev = usbhs_priv_to_dev(priv); |
| int pipe_num = usbhs_pipe_number(pipe); |
| u16 buff_size; |
| u16 bufnmb; |
| u16 bufnmb_cnt; |
| struct renesas_usbhs_driver_pipe_config *pipe_config = |
| usbhsp_get_pipe_config(priv, pipe_num); |
| |
| /* |
| * PIPEBUF |
| * |
| * see |
| * - "Register Descriptions" - "PIPEBUF" register |
| * - "Features" - "Pipe configuration" |
| * - "Operation" - "FIFO Buffer Memory" |
| * - "Operation" - "Pipe Control" |
| */ |
| buff_size = pipe_config->bufsize; |
| bufnmb = pipe_config->bufnum; |
| |
| /* change buff_size to register value */ |
| bufnmb_cnt = (buff_size / 64) - 1; |
| |
| dev_dbg(dev, "pipe : %d : buff_size 0x%x: bufnmb 0x%x\n", |
| pipe_num, buff_size, bufnmb); |
| |
| return (0x1f & bufnmb_cnt) << 10 | |
| (0xff & bufnmb) << 0; |
| } |
| |
| void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel, |
| u16 epnum, u16 maxp) |
| { |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| int pipe_num = usbhs_pipe_number(pipe); |
| struct renesas_usbhs_driver_pipe_config *pipe_config = |
| usbhsp_get_pipe_config(priv, pipe_num); |
| u16 dblb = pipe_config->double_buf ? DBLB : 0; |
| |
| if (devsel > 0xA) { |
| struct device *dev = usbhs_priv_to_dev(priv); |
| |
| dev_err(dev, "devsel error %d\n", devsel); |
| |
| devsel = 0; |
| } |
| |
| usbhsp_pipe_barrier(pipe); |
| |
| pipe->maxp = maxp; |
| |
| usbhsp_pipe_select(pipe); |
| usbhsp_pipe_maxp_set(pipe, 0xFFFF, |
| (devsel << 12) | |
| maxp); |
| |
| if (!usbhs_pipe_is_dcp(pipe)) |
| usbhsp_pipe_cfg_set(pipe, 0x000F | DBLB, epnum | dblb); |
| } |
| |
| /* |
| * pipe control |
| */ |
| int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe) |
| { |
| /* |
| * see |
| * usbhs_pipe_config_update() |
| * usbhs_dcp_malloc() |
| */ |
| return pipe->maxp; |
| } |
| |
| int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe) |
| { |
| return usbhsp_flags_has(pipe, IS_DIR_IN); |
| } |
| |
| int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe) |
| { |
| return usbhsp_flags_has(pipe, IS_DIR_HOST); |
| } |
| |
| int usbhs_pipe_is_running(struct usbhs_pipe *pipe) |
| { |
| return usbhsp_flags_has(pipe, IS_RUNNING); |
| } |
| |
| void usbhs_pipe_running(struct usbhs_pipe *pipe, int running) |
| { |
| if (running) |
| usbhsp_flags_set(pipe, IS_RUNNING); |
| else |
| usbhsp_flags_clr(pipe, IS_RUNNING); |
| } |
| |
| void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int sequence) |
| { |
| u16 mask = (SQCLR | SQSET); |
| u16 val; |
| |
| /* |
| * sequence |
| * 0 : data0 |
| * 1 : data1 |
| * -1 : no change |
| */ |
| switch (sequence) { |
| case 0: |
| val = SQCLR; |
| break; |
| case 1: |
| val = SQSET; |
| break; |
| default: |
| return; |
| } |
| |
| usbhsp_pipectrl_set(pipe, mask, val); |
| } |
| |
| static int usbhs_pipe_get_data_sequence(struct usbhs_pipe *pipe) |
| { |
| return !!(usbhsp_pipectrl_get(pipe) & SQMON); |
| } |
| |
| void usbhs_pipe_clear(struct usbhs_pipe *pipe) |
| { |
| if (usbhs_pipe_is_dcp(pipe)) { |
| usbhs_fifo_clear_dcp(pipe); |
| } else { |
| usbhsp_pipectrl_set(pipe, ACLRM, ACLRM); |
| usbhsp_pipectrl_set(pipe, ACLRM, 0); |
| } |
| } |
| |
| void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable) |
| { |
| int sequence; |
| |
| if (usbhs_pipe_is_dcp(pipe)) |
| return; |
| |
| usbhsp_pipe_select(pipe); |
| /* check if the driver needs to change the BFRE value */ |
| if (!(enable ^ !!(usbhsp_pipe_cfg_get(pipe) & BFRE))) |
| return; |
| |
| sequence = usbhs_pipe_get_data_sequence(pipe); |
| usbhsp_pipe_cfg_set(pipe, BFRE, enable ? BFRE : 0); |
| usbhs_pipe_clear(pipe); |
| usbhs_pipe_data_sequence(pipe, sequence); |
| } |
| |
| static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type) |
| { |
| struct usbhs_pipe *pos, *pipe; |
| int i; |
| |
| /* |
| * find target pipe |
| */ |
| pipe = NULL; |
| usbhs_for_each_pipe_with_dcp(pos, priv, i) { |
| if (!usbhs_pipe_type_is(pos, type)) |
| continue; |
| if (usbhsp_flags_has(pos, IS_USED)) |
| continue; |
| |
| pipe = pos; |
| break; |
| } |
| |
| if (!pipe) |
| return NULL; |
| |
| /* |
| * initialize pipe flags |
| */ |
| usbhsp_flags_init(pipe); |
| usbhsp_flags_set(pipe, IS_USED); |
| |
| return pipe; |
| } |
| |
| static void usbhsp_put_pipe(struct usbhs_pipe *pipe) |
| { |
| usbhsp_flags_init(pipe); |
| } |
| |
| void usbhs_pipe_init(struct usbhs_priv *priv, |
| int (*dma_map_ctrl)(struct device *dma_dev, |
| struct usbhs_pkt *pkt, int map)) |
| { |
| struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); |
| struct usbhs_pipe *pipe; |
| int i; |
| |
| usbhs_for_each_pipe_with_dcp(pipe, priv, i) { |
| usbhsp_flags_init(pipe); |
| pipe->fifo = NULL; |
| pipe->mod_private = NULL; |
| INIT_LIST_HEAD(&pipe->list); |
| |
| /* pipe force init */ |
| usbhs_pipe_clear(pipe); |
| } |
| |
| info->dma_map_ctrl = dma_map_ctrl; |
| } |
| |
| struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv, |
| int endpoint_type, |
| int dir_in) |
| { |
| struct device *dev = usbhs_priv_to_dev(priv); |
| struct usbhs_pipe *pipe; |
| int is_host = usbhs_mod_is_host(priv); |
| int ret; |
| u16 pipecfg, pipebuf; |
| |
| pipe = usbhsp_get_pipe(priv, endpoint_type); |
| if (!pipe) { |
| dev_err(dev, "can't get pipe (%s)\n", |
| usbhsp_pipe_name[endpoint_type]); |
| return NULL; |
| } |
| |
| INIT_LIST_HEAD(&pipe->list); |
| |
| usbhs_pipe_disable(pipe); |
| |
| /* make sure pipe is not busy */ |
| ret = usbhsp_pipe_barrier(pipe); |
| if (ret < 0) { |
| dev_err(dev, "pipe setup failed %d\n", usbhs_pipe_number(pipe)); |
| return NULL; |
| } |
| |
| if (usbhsp_setup_pipecfg(pipe, is_host, dir_in, &pipecfg)) { |
| dev_err(dev, "can't setup pipe\n"); |
| return NULL; |
| } |
| |
| pipebuf = usbhsp_setup_pipebuff(pipe); |
| |
| usbhsp_pipe_select(pipe); |
| usbhsp_pipe_cfg_set(pipe, 0xFFFF, pipecfg); |
| usbhsp_pipe_buf_set(pipe, 0xFFFF, pipebuf); |
| usbhs_pipe_clear(pipe); |
| |
| usbhs_pipe_sequence_data0(pipe); |
| |
| dev_dbg(dev, "enable pipe %d : %s (%s)\n", |
| usbhs_pipe_number(pipe), |
| usbhs_pipe_name(pipe), |
| usbhs_pipe_is_dir_in(pipe) ? "in" : "out"); |
| |
| /* |
| * epnum / maxp are still not set to this pipe. |
| * call usbhs_pipe_config_update() after this function !! |
| */ |
| |
| return pipe; |
| } |
| |
| void usbhs_pipe_free(struct usbhs_pipe *pipe) |
| { |
| usbhsp_put_pipe(pipe); |
| } |
| |
| void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo) |
| { |
| if (pipe->fifo) |
| pipe->fifo->pipe = NULL; |
| |
| pipe->fifo = fifo; |
| |
| if (fifo) |
| fifo->pipe = pipe; |
| } |
| |
| |
| /* |
| * dcp control |
| */ |
| struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv) |
| { |
| struct usbhs_pipe *pipe; |
| |
| pipe = usbhsp_get_pipe(priv, USB_ENDPOINT_XFER_CONTROL); |
| if (!pipe) |
| return NULL; |
| |
| INIT_LIST_HEAD(&pipe->list); |
| |
| /* |
| * call usbhs_pipe_config_update() after this function !! |
| */ |
| |
| return pipe; |
| } |
| |
| void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe) |
| { |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| |
| WARN_ON(!usbhs_pipe_is_dcp(pipe)); |
| |
| usbhs_pipe_enable(pipe); |
| |
| if (!usbhs_mod_is_host(priv)) /* funconly */ |
| usbhsp_pipectrl_set(pipe, CCPL, CCPL); |
| } |
| |
| void usbhs_dcp_dir_for_host(struct usbhs_pipe *pipe, int dir_out) |
| { |
| usbhsp_pipe_cfg_set(pipe, DIR_OUT, |
| dir_out ? DIR_OUT : 0); |
| } |
| |
| /* |
| * pipe module function |
| */ |
| int usbhs_pipe_probe(struct usbhs_priv *priv) |
| { |
| struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); |
| struct usbhs_pipe *pipe; |
| struct device *dev = usbhs_priv_to_dev(priv); |
| struct renesas_usbhs_driver_pipe_config *pipe_configs = |
| usbhs_get_dparam(priv, pipe_configs); |
| int pipe_size = usbhs_get_dparam(priv, pipe_size); |
| int i; |
| |
| /* This driver expects 1st pipe is DCP */ |
| if (pipe_configs[0].type != USB_ENDPOINT_XFER_CONTROL) { |
| dev_err(dev, "1st PIPE is not DCP\n"); |
| return -EINVAL; |
| } |
| |
| info->pipe = kzalloc(sizeof(struct usbhs_pipe) * pipe_size, GFP_KERNEL); |
| if (!info->pipe) { |
| dev_err(dev, "Could not allocate pipe\n"); |
| return -ENOMEM; |
| } |
| |
| info->size = pipe_size; |
| |
| /* |
| * init pipe |
| */ |
| usbhs_for_each_pipe_with_dcp(pipe, priv, i) { |
| pipe->priv = priv; |
| |
| usbhs_pipe_type(pipe) = |
| pipe_configs[i].type & USB_ENDPOINT_XFERTYPE_MASK; |
| |
| dev_dbg(dev, "pipe %x\t: %s\n", |
| i, usbhsp_pipe_name[pipe_configs[i].type]); |
| } |
| |
| return 0; |
| } |
| |
| void usbhs_pipe_remove(struct usbhs_priv *priv) |
| { |
| struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); |
| |
| kfree(info->pipe); |
| } |