| /* |
| * vsp1_lif.c -- R-Car VSP1 LCD Controller Interface |
| * |
| * Copyright (C) 2013-2014 Renesas Electronics Corporation |
| * |
| * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/gfp.h> |
| |
| #include <media/v4l2-subdev.h> |
| |
| #include "vsp1.h" |
| #include "vsp1_dl.h" |
| #include "vsp1_lif.h" |
| |
| #define LIF_MIN_SIZE 2U |
| #define LIF_MAX_SIZE 8190U |
| |
| /* ----------------------------------------------------------------------------- |
| * Device Access |
| */ |
| |
| static inline void vsp1_lif_write(struct vsp1_lif *lif, struct vsp1_dl_list *dl, |
| u32 reg, u32 data) |
| { |
| vsp1_dl_list_write(dl, reg, data); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * V4L2 Subdevice Operations |
| */ |
| |
| static int lif_enum_mbus_code(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| static const unsigned int codes[] = { |
| MEDIA_BUS_FMT_ARGB8888_1X32, |
| MEDIA_BUS_FMT_AYUV8_1X32, |
| }; |
| |
| return vsp1_subdev_enum_mbus_code(subdev, cfg, code, codes, |
| ARRAY_SIZE(codes)); |
| } |
| |
| static int lif_enum_frame_size(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_frame_size_enum *fse) |
| { |
| return vsp1_subdev_enum_frame_size(subdev, cfg, fse, LIF_MIN_SIZE, |
| LIF_MIN_SIZE, LIF_MAX_SIZE, |
| LIF_MAX_SIZE); |
| } |
| |
| static int lif_set_format(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct vsp1_lif *lif = to_lif(subdev); |
| struct v4l2_subdev_pad_config *config; |
| struct v4l2_mbus_framefmt *format; |
| |
| config = vsp1_entity_get_pad_config(&lif->entity, cfg, fmt->which); |
| if (!config) |
| return -EINVAL; |
| |
| /* Default to YUV if the requested format is not supported. */ |
| if (fmt->format.code != MEDIA_BUS_FMT_ARGB8888_1X32 && |
| fmt->format.code != MEDIA_BUS_FMT_AYUV8_1X32) |
| fmt->format.code = MEDIA_BUS_FMT_AYUV8_1X32; |
| |
| format = vsp1_entity_get_pad_format(&lif->entity, config, fmt->pad); |
| |
| if (fmt->pad == LIF_PAD_SOURCE) { |
| /* The LIF source format is always identical to its sink |
| * format. |
| */ |
| fmt->format = *format; |
| return 0; |
| } |
| |
| format->code = fmt->format.code; |
| format->width = clamp_t(unsigned int, fmt->format.width, |
| LIF_MIN_SIZE, LIF_MAX_SIZE); |
| format->height = clamp_t(unsigned int, fmt->format.height, |
| LIF_MIN_SIZE, LIF_MAX_SIZE); |
| format->field = V4L2_FIELD_NONE; |
| format->colorspace = V4L2_COLORSPACE_SRGB; |
| |
| fmt->format = *format; |
| |
| /* Propagate the format to the source pad. */ |
| format = vsp1_entity_get_pad_format(&lif->entity, config, |
| LIF_PAD_SOURCE); |
| *format = fmt->format; |
| |
| return 0; |
| } |
| |
| static struct v4l2_subdev_pad_ops lif_pad_ops = { |
| .init_cfg = vsp1_entity_init_cfg, |
| .enum_mbus_code = lif_enum_mbus_code, |
| .enum_frame_size = lif_enum_frame_size, |
| .get_fmt = vsp1_subdev_get_pad_format, |
| .set_fmt = lif_set_format, |
| }; |
| |
| static struct v4l2_subdev_ops lif_ops = { |
| .pad = &lif_pad_ops, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * VSP1 Entity Operations |
| */ |
| |
| static void lif_configure(struct vsp1_entity *entity, |
| struct vsp1_pipeline *pipe, |
| struct vsp1_dl_list *dl) |
| { |
| const struct v4l2_mbus_framefmt *format; |
| struct vsp1_lif *lif = to_lif(&entity->subdev); |
| unsigned int hbth = 1300; |
| unsigned int obth = 400; |
| unsigned int lbth = 200; |
| |
| format = vsp1_entity_get_pad_format(&lif->entity, lif->entity.config, |
| LIF_PAD_SOURCE); |
| |
| obth = min(obth, (format->width + 1) / 2 * format->height - 4); |
| |
| vsp1_lif_write(lif, dl, VI6_LIF_CSBTH, |
| (hbth << VI6_LIF_CSBTH_HBTH_SHIFT) | |
| (lbth << VI6_LIF_CSBTH_LBTH_SHIFT)); |
| |
| vsp1_lif_write(lif, dl, VI6_LIF_CTRL, |
| (obth << VI6_LIF_CTRL_OBTH_SHIFT) | |
| (format->code == 0 ? VI6_LIF_CTRL_CFMT : 0) | |
| VI6_LIF_CTRL_REQSEL | VI6_LIF_CTRL_LIF_EN); |
| } |
| |
| static const struct vsp1_entity_operations lif_entity_ops = { |
| .configure = lif_configure, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * Initialization and Cleanup |
| */ |
| |
| struct vsp1_lif *vsp1_lif_create(struct vsp1_device *vsp1) |
| { |
| struct vsp1_lif *lif; |
| int ret; |
| |
| lif = devm_kzalloc(vsp1->dev, sizeof(*lif), GFP_KERNEL); |
| if (lif == NULL) |
| return ERR_PTR(-ENOMEM); |
| |
| lif->entity.ops = &lif_entity_ops; |
| lif->entity.type = VSP1_ENTITY_LIF; |
| |
| ret = vsp1_entity_init(vsp1, &lif->entity, "lif", 2, &lif_ops); |
| if (ret < 0) |
| return ERR_PTR(ret); |
| |
| return lif; |
| } |