drivers/i2c/busses/i2c-lpc2k.c - kernel/quantenna - Git at Google

 /*
  * Copyright (C) 2011 NXP Semiconductors
  *
  * Code portions referenced from the i2x-pxa and i2c-pnx drivers
  *
  * Make SMBus byte and word transactions work on LPC178x/7x
  * Copyright (c) 2012
  * Alexander Potashev, Emcraft Systems, aspotashev@emcraft.com
  * Anton Protopopov, Emcraft Systems, antonp@emcraft.com
  *
  * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  */

 #include <linux/clk.h>
 #include <linux/errno.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 #include <linux/time.h>

 /* LPC24xx register offsets and bits */
 #define LPC24XX_I2CONSET	0x00
 #define LPC24XX_I2STAT		0x04
 #define LPC24XX_I2DAT		0x08
 #define LPC24XX_I2ADDR		0x0c
 #define LPC24XX_I2SCLH		0x10
 #define LPC24XX_I2SCLL		0x14
 #define LPC24XX_I2CONCLR	0x18

 #define LPC24XX_AA		BIT(2)
 #define LPC24XX_SI		BIT(3)
 #define LPC24XX_STO		BIT(4)
 #define LPC24XX_STA		BIT(5)
 #define LPC24XX_I2EN		BIT(6)

 #define LPC24XX_STO_AA		(LPC24XX_STO | LPC24XX_AA)
 #define LPC24XX_CLEAR_ALL	(LPC24XX_AA | LPC24XX_SI | LPC24XX_STO | \
 				 LPC24XX_STA | LPC24XX_I2EN)

 /* I2C SCL clock has different duty cycle depending on mode */
 #define I2C_STD_MODE_DUTY		46
 #define I2C_FAST_MODE_DUTY		36
 #define I2C_FAST_MODE_PLUS_DUTY		38

 /*
  * 26 possible I2C status codes, but codes applicable only
  * to master are listed here and used in this driver
  */
 enum {
 	M_BUS_ERROR		= 0x00,
 	M_START			= 0x08,
 	M_REPSTART		= 0x10,
 	MX_ADDR_W_ACK		= 0x18,
 	MX_ADDR_W_NACK		= 0x20,
 	MX_DATA_W_ACK		= 0x28,
 	MX_DATA_W_NACK		= 0x30,
 	M_DATA_ARB_LOST		= 0x38,
 	MR_ADDR_R_ACK		= 0x40,
 	MR_ADDR_R_NACK		= 0x48,
 	MR_DATA_R_ACK		= 0x50,
 	MR_DATA_R_NACK		= 0x58,
 	M_I2C_IDLE		= 0xf8,
 };

 struct lpc2k_i2c {
 	void __iomem		*base;
 	struct clk		*clk;
 	int			irq;
 	wait_queue_head_t	wait;
 	struct i2c_adapter	adap;
 	struct i2c_msg		*msg;
 	int			msg_idx;
 	int			msg_status;
 	int			is_last;
 };

 static void i2c_lpc2k_reset(struct lpc2k_i2c *i2c)
 {
 	/* Will force clear all statuses */
 	writel(LPC24XX_CLEAR_ALL, i2c->base + LPC24XX_I2CONCLR);
 	writel(0, i2c->base + LPC24XX_I2ADDR);
 	writel(LPC24XX_I2EN, i2c->base + LPC24XX_I2CONSET);
 }

 static int i2c_lpc2k_clear_arb(struct lpc2k_i2c *i2c)
 {
 	unsigned long timeout = jiffies + msecs_to_jiffies(1000);

 	/*
 	 * If the transfer needs to abort for some reason, we'll try to
 	 * force a stop condition to clear any pending bus conditions
 	 */
 	writel(LPC24XX_STO, i2c->base + LPC24XX_I2CONSET);

 	/* Wait for status change */
 	while (readl(i2c->base + LPC24XX_I2STAT) != M_I2C_IDLE) {
 		if (time_after(jiffies, timeout)) {
 			/* Bus was not idle, try to reset adapter */
 			i2c_lpc2k_reset(i2c);
 			return -EBUSY;
 		}

 		cpu_relax();
 	}

 	return 0;
 }

 static void i2c_lpc2k_pump_msg(struct lpc2k_i2c *i2c)
 {
 	unsigned char data;
 	u32 status;

 	/*
 	 * I2C in the LPC2xxx series is basically a state machine.
 	 * Just run through the steps based on the current status.
 	 */
 	status = readl(i2c->base + LPC24XX_I2STAT);

 	switch (status) {
 	case M_START:
 	case M_REPSTART:
 		/* Start bit was just sent out, send out addr and dir */
 		data = i2c_8bit_addr_from_msg(i2c->msg);

 		writel(data, i2c->base + LPC24XX_I2DAT);
 		writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR);
 		break;

 	case MX_ADDR_W_ACK:
 	case MX_DATA_W_ACK:
 		/*
 		 * Address or data was sent out with an ACK. If there is more
 		 * data to send, send it now
 		 */
 		if (i2c->msg_idx < i2c->msg->len) {
 			writel(i2c->msg->buf[i2c->msg_idx],
 			       i2c->base + LPC24XX_I2DAT);
 		} else if (i2c->is_last) {
 			/* Last message, send stop */
 			writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET);
 			writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
 			i2c->msg_status = 0;
 			disable_irq_nosync(i2c->irq);
 		} else {
 			i2c->msg_status = 0;
 			disable_irq_nosync(i2c->irq);
 		}

 		i2c->msg_idx++;
 		break;

 	case MR_ADDR_R_ACK:
 		/* Receive first byte from slave */
 		if (i2c->msg->len == 1) {
 			/* Last byte, return NACK */
 			writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONCLR);
 		} else {
 			/* Not last byte, return ACK */
 			writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONSET);
 		}

 		writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR);
 		break;

 	case MR_DATA_R_NACK:
 		/*
 		 * The I2C shows NACK status on reads, so we need to accept
 		 * the NACK as an ACK here. This should be ok, as the real
 		 * BACK would of been caught on the address write.
 		 */
 	case MR_DATA_R_ACK:
 		/* Data was received */
 		if (i2c->msg_idx < i2c->msg->len) {
 			i2c->msg->buf[i2c->msg_idx] =
 					readl(i2c->base + LPC24XX_I2DAT);
 		}

 		/* If transfer is done, send STOP */
 		if (i2c->msg_idx >= i2c->msg->len - 1 && i2c->is_last) {
 			writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET);
 			writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
 			i2c->msg_status = 0;
 		}

 		/* Message is done */
 		if (i2c->msg_idx >= i2c->msg->len - 1) {
 			i2c->msg_status = 0;
 			disable_irq_nosync(i2c->irq);
 		}

 		/*
 		 * One pre-last data input, send NACK to tell the slave that
 		 * this is going to be the last data byte to be transferred.
 		 */
 		if (i2c->msg_idx >= i2c->msg->len - 2) {
 			/* One byte left to receive - NACK */
 			writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONCLR);
 		} else {
 			/* More than one byte left to receive - ACK */
 			writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONSET);
 		}

 		writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR);
 		i2c->msg_idx++;
 		break;

 	case MX_ADDR_W_NACK:
 	case MX_DATA_W_NACK:
 	case MR_ADDR_R_NACK:
 		/* NACK processing is done */
 		writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET);
 		i2c->msg_status = -ENXIO;
 		disable_irq_nosync(i2c->irq);
 		break;

 	case M_DATA_ARB_LOST:
 		/* Arbitration lost */
 		i2c->msg_status = -EAGAIN;

 		/* Release the I2C bus */
 		writel(LPC24XX_STA | LPC24XX_STO, i2c->base + LPC24XX_I2CONCLR);
 		disable_irq_nosync(i2c->irq);
 		break;

 	default:
 		/* Unexpected statuses */
 		i2c->msg_status = -EIO;
 		disable_irq_nosync(i2c->irq);
 		break;
 	}

 	/* Exit on failure or all bytes transferred */
 	if (i2c->msg_status != -EBUSY)
 		wake_up(&i2c->wait);

 	/*
 	 * If `msg_status` is zero, then `lpc2k_process_msg()`
 	 * is responsible for clearing the SI flag.
 	 */
 	if (i2c->msg_status != 0)
 		writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
 }

 static int lpc2k_process_msg(struct lpc2k_i2c *i2c, int msgidx)
 {
 	/* A new transfer is kicked off by initiating a start condition */
 	if (!msgidx) {
 		writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONSET);
 	} else {
 		/*
 		 * A multi-message I2C transfer continues where the
 		 * previous I2C transfer left off and uses the
 		 * current condition of the I2C adapter.
 		 */
 		if (unlikely(i2c->msg->flags & I2C_M_NOSTART)) {
 			WARN_ON(i2c->msg->len == 0);

 			if (!(i2c->msg->flags & I2C_M_RD)) {
 				/* Start transmit of data */
 				writel(i2c->msg->buf[0],
 				       i2c->base + LPC24XX_I2DAT);
 				i2c->msg_idx++;
 			}
 		} else {
 			/* Start or repeated start */
 			writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONSET);
 		}

 		writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
 	}

 	enable_irq(i2c->irq);

 	/* Wait for transfer completion */
 	if (wait_event_timeout(i2c->wait, i2c->msg_status != -EBUSY,
 			       msecs_to_jiffies(1000)) == 0) {
 		disable_irq_nosync(i2c->irq);

 		return -ETIMEDOUT;
 	}

 	return i2c->msg_status;
 }

 static int i2c_lpc2k_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 			  int msg_num)
 {
 	struct lpc2k_i2c *i2c = i2c_get_adapdata(adap);
 	int ret, i;
 	u32 stat;

 	/* Check for bus idle condition */
 	stat = readl(i2c->base + LPC24XX_I2STAT);
 	if (stat != M_I2C_IDLE) {
 		/* Something is holding the bus, try to clear it */
 		return i2c_lpc2k_clear_arb(i2c);
 	}

 	/* Process a single message at a time */
 	for (i = 0; i < msg_num; i++) {
 		/* Save message pointer and current message data index */
 		i2c->msg = &msgs[i];
 		i2c->msg_idx = 0;
 		i2c->msg_status = -EBUSY;
 		i2c->is_last = (i == (msg_num - 1));

 		ret = lpc2k_process_msg(i2c, i);
 		if (ret)
 			return ret;
 	}

 	return msg_num;
 }

 static irqreturn_t i2c_lpc2k_handler(int irq, void *dev_id)
 {
 	struct lpc2k_i2c *i2c = dev_id;

 	if (readl(i2c->base + LPC24XX_I2CONSET) & LPC24XX_SI) {
 		i2c_lpc2k_pump_msg(i2c);
 		return IRQ_HANDLED;
 	}

 	return IRQ_NONE;
 }

 static u32 i2c_lpc2k_functionality(struct i2c_adapter *adap)
 {
 	/* Only emulated SMBus for now */
 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
 }

 static const struct i2c_algorithm i2c_lpc2k_algorithm = {
 	.master_xfer	= i2c_lpc2k_xfer,
 	.functionality	= i2c_lpc2k_functionality,
 };

 static int i2c_lpc2k_probe(struct platform_device *pdev)
 {
 	struct lpc2k_i2c *i2c;
 	struct resource *res;
 	u32 bus_clk_rate;
 	u32 scl_high;
 	u32 clkrate;
 	int ret;

 	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
 	if (!i2c)
 		return -ENOMEM;

 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	i2c->base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(i2c->base))
 		return PTR_ERR(i2c->base);

 	i2c->irq = platform_get_irq(pdev, 0);
 	if (i2c->irq < 0) {
 		dev_err(&pdev->dev, "can't get interrupt resource\n");
 		return i2c->irq;
 	}

 	init_waitqueue_head(&i2c->wait);

 	i2c->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(i2c->clk)) {
 		dev_err(&pdev->dev, "error getting clock\n");
 		return PTR_ERR(i2c->clk);
 	}

 	ret = clk_prepare_enable(i2c->clk);
 	if (ret) {
 		dev_err(&pdev->dev, "unable to enable clock.\n");
 		return ret;
 	}

 	ret = devm_request_irq(&pdev->dev, i2c->irq, i2c_lpc2k_handler, 0,
 			       dev_name(&pdev->dev), i2c);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "can't request interrupt.\n");
 		goto fail_clk;
 	}

 	disable_irq_nosync(i2c->irq);

 	/* Place controller is a known state */
 	i2c_lpc2k_reset(i2c);

 	ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
 				   &bus_clk_rate);
 	if (ret)
 		bus_clk_rate = 100000; /* 100 kHz default clock rate */

 	clkrate = clk_get_rate(i2c->clk);
 	if (clkrate == 0) {
 		dev_err(&pdev->dev, "can't get I2C base clock\n");
 		ret = -EINVAL;
 		goto fail_clk;
 	}

 	/* Setup I2C dividers to generate clock with proper duty cycle */
 	clkrate = clkrate / bus_clk_rate;
 	if (bus_clk_rate <= 100000)
 		scl_high = (clkrate * I2C_STD_MODE_DUTY) / 100;
 	else if (bus_clk_rate <= 400000)
 		scl_high = (clkrate * I2C_FAST_MODE_DUTY) / 100;
 	else
 		scl_high = (clkrate * I2C_FAST_MODE_PLUS_DUTY) / 100;

 	writel(scl_high, i2c->base + LPC24XX_I2SCLH);
 	writel(clkrate - scl_high, i2c->base + LPC24XX_I2SCLL);

 	platform_set_drvdata(pdev, i2c);

 	i2c_set_adapdata(&i2c->adap, i2c);
 	i2c->adap.owner = THIS_MODULE;
 	strlcpy(i2c->adap.name, "LPC2K I2C adapter", sizeof(i2c->adap.name));
 	i2c->adap.algo = &i2c_lpc2k_algorithm;
 	i2c->adap.dev.parent = &pdev->dev;
 	i2c->adap.dev.of_node = pdev->dev.of_node;

 	ret = i2c_add_adapter(&i2c->adap);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to add adapter!\n");
 		goto fail_clk;
 	}

 	dev_info(&pdev->dev, "LPC2K I2C adapter\n");

 	return 0;

 fail_clk:
 	clk_disable_unprepare(i2c->clk);
 	return ret;
 }

 static int i2c_lpc2k_remove(struct platform_device *dev)
 {
 	struct lpc2k_i2c *i2c = platform_get_drvdata(dev);

 	i2c_del_adapter(&i2c->adap);
 	clk_disable_unprepare(i2c->clk);

 	return 0;
 }

 #ifdef CONFIG_PM
 static int i2c_lpc2k_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct lpc2k_i2c *i2c = platform_get_drvdata(pdev);

 	clk_disable(i2c->clk);

 	return 0;
 }

 static int i2c_lpc2k_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct lpc2k_i2c *i2c = platform_get_drvdata(pdev);

 	clk_enable(i2c->clk);
 	i2c_lpc2k_reset(i2c);

 	return 0;
 }

 static const struct dev_pm_ops i2c_lpc2k_dev_pm_ops = {
 	.suspend_noirq = i2c_lpc2k_suspend,
 	.resume_noirq = i2c_lpc2k_resume,
 };

 #define I2C_LPC2K_DEV_PM_OPS (&i2c_lpc2k_dev_pm_ops)
 #else
 #define I2C_LPC2K_DEV_PM_OPS NULL
 #endif

 static const struct of_device_id lpc2k_i2c_match[] = {
 	{ .compatible = "nxp,lpc1788-i2c" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, lpc2k_i2c_match);

 static struct platform_driver i2c_lpc2k_driver = {
 	.probe	= i2c_lpc2k_probe,
 	.remove	= i2c_lpc2k_remove,
 	.driver	= {
 		.name		= "lpc2k-i2c",
 		.pm		= I2C_LPC2K_DEV_PM_OPS,
 		.of_match_table	= lpc2k_i2c_match,
 	},
 };
 module_platform_driver(i2c_lpc2k_driver);

 MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
 MODULE_DESCRIPTION("I2C driver for LPC2xxx devices");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:lpc2k-i2c");
	/*
	* Copyright (C) 2011 NXP Semiconductors
	*
	* Code portions referenced from the i2x-pxa and i2c-pnx drivers
	*
	* Make SMBus byte and word transactions work on LPC178x/7x
	* Copyright (c) 2012
	* Alexander Potashev, Emcraft Systems, aspotashev@emcraft.com
	* Anton Protopopov, Emcraft Systems, antonp@emcraft.com
	*
	* Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	*/

	#include <linux/clk.h>
	#include <linux/errno.h>
	#include <linux/i2c.h>
	#include <linux/interrupt.h>
	#include <linux/io.h>
	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/of_device.h>
	#include <linux/platform_device.h>
	#include <linux/sched.h>
	#include <linux/time.h>

	/* LPC24xx register offsets and bits */
	#define LPC24XX_I2CONSET 0x00
	#define LPC24XX_I2STAT 0x04
	#define LPC24XX_I2DAT 0x08
	#define LPC24XX_I2ADDR 0x0c
	#define LPC24XX_I2SCLH 0x10
	#define LPC24XX_I2SCLL 0x14
	#define LPC24XX_I2CONCLR 0x18

	#define LPC24XX_AA BIT(2)
	#define LPC24XX_SI BIT(3)
	#define LPC24XX_STO BIT(4)
	#define LPC24XX_STA BIT(5)
	#define LPC24XX_I2EN BIT(6)

	#define LPC24XX_STO_AA (LPC24XX_STO \| LPC24XX_AA)
	#define LPC24XX_CLEAR_ALL (LPC24XX_AA \| LPC24XX_SI \| LPC24XX_STO \| \
	LPC24XX_STA \| LPC24XX_I2EN)

	/* I2C SCL clock has different duty cycle depending on mode */
	#define I2C_STD_MODE_DUTY 46
	#define I2C_FAST_MODE_DUTY 36
	#define I2C_FAST_MODE_PLUS_DUTY 38

	/*
	* 26 possible I2C status codes, but codes applicable only
	* to master are listed here and used in this driver
	*/
	enum {
	M_BUS_ERROR = 0x00,
	M_START = 0x08,
	M_REPSTART = 0x10,
	MX_ADDR_W_ACK = 0x18,
	MX_ADDR_W_NACK = 0x20,
	MX_DATA_W_ACK = 0x28,
	MX_DATA_W_NACK = 0x30,
	M_DATA_ARB_LOST = 0x38,
	MR_ADDR_R_ACK = 0x40,
	MR_ADDR_R_NACK = 0x48,
	MR_DATA_R_ACK = 0x50,
	MR_DATA_R_NACK = 0x58,
	M_I2C_IDLE = 0xf8,
	};

	struct lpc2k_i2c {
	void __iomem *base;
	struct clk *clk;
	int irq;
	wait_queue_head_t wait;
	struct i2c_adapter adap;
	struct i2c_msg *msg;
	int msg_idx;
	int msg_status;
	int is_last;
	};

	static void i2c_lpc2k_reset(struct lpc2k_i2c *i2c)
	{
	/* Will force clear all statuses */
	writel(LPC24XX_CLEAR_ALL, i2c->base + LPC24XX_I2CONCLR);
	writel(0, i2c->base + LPC24XX_I2ADDR);
	writel(LPC24XX_I2EN, i2c->base + LPC24XX_I2CONSET);
	}

	static int i2c_lpc2k_clear_arb(struct lpc2k_i2c *i2c)
	{
	unsigned long timeout = jiffies + msecs_to_jiffies(1000);

	/*
	* If the transfer needs to abort for some reason, we'll try to
	* force a stop condition to clear any pending bus conditions
	*/
	writel(LPC24XX_STO, i2c->base + LPC24XX_I2CONSET);

	/* Wait for status change */
	while (readl(i2c->base + LPC24XX_I2STAT) != M_I2C_IDLE) {
	if (time_after(jiffies, timeout)) {
	/* Bus was not idle, try to reset adapter */
	i2c_lpc2k_reset(i2c);
	return -EBUSY;
	}

	cpu_relax();
	}

	return 0;
	}

	static void i2c_lpc2k_pump_msg(struct lpc2k_i2c *i2c)
	{
	unsigned char data;
	u32 status;

	/*
	* I2C in the LPC2xxx series is basically a state machine.
	* Just run through the steps based on the current status.
	*/
	status = readl(i2c->base + LPC24XX_I2STAT);

	switch (status) {
	case M_START:
	case M_REPSTART:
	/* Start bit was just sent out, send out addr and dir */
	data = i2c_8bit_addr_from_msg(i2c->msg);

	writel(data, i2c->base + LPC24XX_I2DAT);
	writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR);
	break;

	case MX_ADDR_W_ACK:
	case MX_DATA_W_ACK:
	/*
	* Address or data was sent out with an ACK. If there is more
	* data to send, send it now
	*/
	if (i2c->msg_idx < i2c->msg->len) {
	writel(i2c->msg->buf[i2c->msg_idx],
	i2c->base + LPC24XX_I2DAT);
	} else if (i2c->is_last) {
	/* Last message, send stop */
	writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET);
	writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
	i2c->msg_status = 0;
	disable_irq_nosync(i2c->irq);
	} else {
	i2c->msg_status = 0;
	disable_irq_nosync(i2c->irq);
	}

	i2c->msg_idx++;
	break;

	case MR_ADDR_R_ACK:
	/* Receive first byte from slave */
	if (i2c->msg->len == 1) {
	/* Last byte, return NACK */
	writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONCLR);
	} else {
	/* Not last byte, return ACK */
	writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONSET);
	}

	writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR);
	break;

	case MR_DATA_R_NACK:
	/*
	* The I2C shows NACK status on reads, so we need to accept
	* the NACK as an ACK here. This should be ok, as the real
	* BACK would of been caught on the address write.
	*/
	case MR_DATA_R_ACK:
	/* Data was received */
	if (i2c->msg_idx < i2c->msg->len) {
	i2c->msg->buf[i2c->msg_idx] =
	readl(i2c->base + LPC24XX_I2DAT);
	}

	/* If transfer is done, send STOP */
	if (i2c->msg_idx >= i2c->msg->len - 1 && i2c->is_last) {
	writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET);
	writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
	i2c->msg_status = 0;
	}

	/* Message is done */
	if (i2c->msg_idx >= i2c->msg->len - 1) {
	i2c->msg_status = 0;
	disable_irq_nosync(i2c->irq);
	}

	/*
	* One pre-last data input, send NACK to tell the slave that
	* this is going to be the last data byte to be transferred.
	*/
	if (i2c->msg_idx >= i2c->msg->len - 2) {
	/* One byte left to receive - NACK */
	writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONCLR);
	} else {
	/* More than one byte left to receive - ACK */
	writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONSET);
	}

	writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR);
	i2c->msg_idx++;
	break;

	case MX_ADDR_W_NACK:
	case MX_DATA_W_NACK:
	case MR_ADDR_R_NACK:
	/* NACK processing is done */
	writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET);
	i2c->msg_status = -ENXIO;
	disable_irq_nosync(i2c->irq);
	break;

	case M_DATA_ARB_LOST:
	/* Arbitration lost */
	i2c->msg_status = -EAGAIN;

	/* Release the I2C bus */
	writel(LPC24XX_STA \| LPC24XX_STO, i2c->base + LPC24XX_I2CONCLR);
	disable_irq_nosync(i2c->irq);
	break;

	default:
	/* Unexpected statuses */
	i2c->msg_status = -EIO;
	disable_irq_nosync(i2c->irq);
	break;
	}

	/* Exit on failure or all bytes transferred */
	if (i2c->msg_status != -EBUSY)
	wake_up(&i2c->wait);

	/*
	* If `msg_status` is zero, then `lpc2k_process_msg()`
	* is responsible for clearing the SI flag.
	*/
	if (i2c->msg_status != 0)
	writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
	}

	static int lpc2k_process_msg(struct lpc2k_i2c *i2c, int msgidx)
	{
	/* A new transfer is kicked off by initiating a start condition */
	if (!msgidx) {
	writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONSET);
	} else {
	/*
	* A multi-message I2C transfer continues where the
	* previous I2C transfer left off and uses the
	* current condition of the I2C adapter.
	*/
	if (unlikely(i2c->msg->flags & I2C_M_NOSTART)) {
	WARN_ON(i2c->msg->len == 0);

	if (!(i2c->msg->flags & I2C_M_RD)) {
	/* Start transmit of data */
	writel(i2c->msg->buf[0],
	i2c->base + LPC24XX_I2DAT);
	i2c->msg_idx++;
	}
	} else {
	/* Start or repeated start */
	writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONSET);
	}

	writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
	}

	enable_irq(i2c->irq);

	/* Wait for transfer completion */
	if (wait_event_timeout(i2c->wait, i2c->msg_status != -EBUSY,
	msecs_to_jiffies(1000)) == 0) {
	disable_irq_nosync(i2c->irq);

	return -ETIMEDOUT;
	}

	return i2c->msg_status;
	}

	static int i2c_lpc2k_xfer(struct i2c_adapter adap, struct i2c_msg msgs,
	int msg_num)
	{
	struct lpc2k_i2c *i2c = i2c_get_adapdata(adap);
	int ret, i;
	u32 stat;

	/* Check for bus idle condition */
	stat = readl(i2c->base + LPC24XX_I2STAT);
	if (stat != M_I2C_IDLE) {
	/* Something is holding the bus, try to clear it */
	return i2c_lpc2k_clear_arb(i2c);
	}

	/* Process a single message at a time */
	for (i = 0; i < msg_num; i++) {
	/* Save message pointer and current message data index */
	i2c->msg = &msgs[i];
	i2c->msg_idx = 0;
	i2c->msg_status = -EBUSY;
	i2c->is_last = (i == (msg_num - 1));

	ret = lpc2k_process_msg(i2c, i);
	if (ret)
	return ret;
	}

	return msg_num;
	}

	static irqreturn_t i2c_lpc2k_handler(int irq, void *dev_id)
	{
	struct lpc2k_i2c *i2c = dev_id;

	if (readl(i2c->base + LPC24XX_I2CONSET) & LPC24XX_SI) {
	i2c_lpc2k_pump_msg(i2c);
	return IRQ_HANDLED;
	}

	return IRQ_NONE;
	}

	static u32 i2c_lpc2k_functionality(struct i2c_adapter *adap)
	{
	/* Only emulated SMBus for now */
	return I2C_FUNC_I2C \| I2C_FUNC_SMBUS_EMUL;
	}

	static const struct i2c_algorithm i2c_lpc2k_algorithm = {
	.master_xfer = i2c_lpc2k_xfer,
	.functionality = i2c_lpc2k_functionality,
	};

	static int i2c_lpc2k_probe(struct platform_device *pdev)
	{
	struct lpc2k_i2c *i2c;
	struct resource *res;
	u32 bus_clk_rate;
	u32 scl_high;
	u32 clkrate;
	int ret;

	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
	if (!i2c)
	return -ENOMEM;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	i2c->base = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(i2c->base))
	return PTR_ERR(i2c->base);

	i2c->irq = platform_get_irq(pdev, 0);
	if (i2c->irq < 0) {
	dev_err(&pdev->dev, "can't get interrupt resource\n");
	return i2c->irq;
	}

	init_waitqueue_head(&i2c->wait);

	i2c->clk = devm_clk_get(&pdev->dev, NULL);
	if (IS_ERR(i2c->clk)) {
	dev_err(&pdev->dev, "error getting clock\n");
	return PTR_ERR(i2c->clk);
	}

	ret = clk_prepare_enable(i2c->clk);
	if (ret) {
	dev_err(&pdev->dev, "unable to enable clock.\n");
	return ret;
	}

	ret = devm_request_irq(&pdev->dev, i2c->irq, i2c_lpc2k_handler, 0,
	dev_name(&pdev->dev), i2c);
	if (ret < 0) {
	dev_err(&pdev->dev, "can't request interrupt.\n");
	goto fail_clk;
	}

	disable_irq_nosync(i2c->irq);

	/* Place controller is a known state */
	i2c_lpc2k_reset(i2c);

	ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
	&bus_clk_rate);
	if (ret)
	bus_clk_rate = 100000; /* 100 kHz default clock rate */

	clkrate = clk_get_rate(i2c->clk);
	if (clkrate == 0) {
	dev_err(&pdev->dev, "can't get I2C base clock\n");
	ret = -EINVAL;
	goto fail_clk;
	}

	/* Setup I2C dividers to generate clock with proper duty cycle */
	clkrate = clkrate / bus_clk_rate;
	if (bus_clk_rate <= 100000)
	scl_high = (clkrate * I2C_STD_MODE_DUTY) / 100;
	else if (bus_clk_rate <= 400000)
	scl_high = (clkrate * I2C_FAST_MODE_DUTY) / 100;
	else
	scl_high = (clkrate * I2C_FAST_MODE_PLUS_DUTY) / 100;

	writel(scl_high, i2c->base + LPC24XX_I2SCLH);
	writel(clkrate - scl_high, i2c->base + LPC24XX_I2SCLL);

	platform_set_drvdata(pdev, i2c);

	i2c_set_adapdata(&i2c->adap, i2c);
	i2c->adap.owner = THIS_MODULE;
	strlcpy(i2c->adap.name, "LPC2K I2C adapter", sizeof(i2c->adap.name));
	i2c->adap.algo = &i2c_lpc2k_algorithm;
	i2c->adap.dev.parent = &pdev->dev;
	i2c->adap.dev.of_node = pdev->dev.of_node;

	ret = i2c_add_adapter(&i2c->adap);
	if (ret < 0) {
	dev_err(&pdev->dev, "failed to add adapter!\n");
	goto fail_clk;
	}

	dev_info(&pdev->dev, "LPC2K I2C adapter\n");

	return 0;

	fail_clk:
	clk_disable_unprepare(i2c->clk);
	return ret;
	}

	static int i2c_lpc2k_remove(struct platform_device *dev)
	{
	struct lpc2k_i2c *i2c = platform_get_drvdata(dev);

	i2c_del_adapter(&i2c->adap);
	clk_disable_unprepare(i2c->clk);

	return 0;
	}

	#ifdef CONFIG_PM
	static int i2c_lpc2k_suspend(struct device *dev)
	{
	struct platform_device *pdev = to_platform_device(dev);
	struct lpc2k_i2c *i2c = platform_get_drvdata(pdev);

	clk_disable(i2c->clk);

	return 0;
	}

	static int i2c_lpc2k_resume(struct device *dev)
	{
	struct platform_device *pdev = to_platform_device(dev);
	struct lpc2k_i2c *i2c = platform_get_drvdata(pdev);

	clk_enable(i2c->clk);
	i2c_lpc2k_reset(i2c);

	return 0;
	}

	static const struct dev_pm_ops i2c_lpc2k_dev_pm_ops = {
	.suspend_noirq = i2c_lpc2k_suspend,
	.resume_noirq = i2c_lpc2k_resume,
	};

	#define I2C_LPC2K_DEV_PM_OPS (&i2c_lpc2k_dev_pm_ops)
	#else
	#define I2C_LPC2K_DEV_PM_OPS NULL
	#endif

	static const struct of_device_id lpc2k_i2c_match[] = {
	{ .compatible = "nxp,lpc1788-i2c" },
	{},
	};
	MODULE_DEVICE_TABLE(of, lpc2k_i2c_match);

	static struct platform_driver i2c_lpc2k_driver = {
	.probe = i2c_lpc2k_probe,
	.remove = i2c_lpc2k_remove,
	.driver = {
	.name = "lpc2k-i2c",
	.pm = I2C_LPC2K_DEV_PM_OPS,
	.of_match_table = lpc2k_i2c_match,
	},
	};
	module_platform_driver(i2c_lpc2k_driver);

	MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
	MODULE_DESCRIPTION("I2C driver for LPC2xxx devices");
	MODULE_LICENSE("GPL");
	MODULE_ALIAS("platform:lpc2k-i2c");