| # |
| # Quantenna Ruby board |
| # |
| |
| menu "Quantenna" |
| |
| config QUANTENNA_RUBY |
| bool "Quantenna Ruby board support" |
| select WEXT_PRIV |
| select WIRELESS_EXT |
| select ARCH_REQUIRE_GPIOLIB |
| |
| config ARCH_RUBY_NUMA |
| bool "Support of Ruby non-unified memory architecture" |
| |
| config QVSP |
| bool "Video Stream Protection" |
| help |
| Advanced stream protection feature. |
| |
| config RUBY_PCIE_TARGET |
| bool "Include the PCIe target driver for board with a PCIe interface" |
| help |
| A build for a board with a PCIe interface must select this option |
| |
| config RUBY_PCIE_HOST |
| bool "Include the PCIe host driver for board with a PCIe interface" |
| help |
| A build for a board with a PCIe RootComplex support must select this option |
| |
| config TOPAZ_PCIE_TARGET |
| bool "Include the topaz PCIe target driver for board with a PCIe interface" |
| help |
| A build for a board with a topaz PCIe interface must select this option |
| |
| config TOPAZ_PCIE_HOST |
| bool "Include topaz PCIe host interface for TOPAZ RC Host" |
| help |
| A build for a board with a topaz PCIe RC Host support must select this option |
| config PCIEPORTBUS |
| depends on TOPAZ_PCIE_HOST |
| bool "Include generic PCIe driver" |
| default y |
| |
| config TOPAZ_DBDC_HOST |
| bool "include topaz DBDC host interface for TOPAZ RC Host" |
| help |
| A build for a board with a topaz RC Host support for DBDC must select this option |
| |
| config ARCH_RUBY_SRAM_IRQ_STACK |
| bool "Use dedicated SRAM stack for interrupts" if (!ARCH_ARC_LV2_INTR && ARCH_ARC_CURR_IN_REG && !PREEMPT) |
| |
| config KERNEL_TEXT_SNAPSHOTS |
| bool "Take snapshots of kernel text section to detect corruption" |
| default n |
| help |
| Create /proc/kdump, which is a human readable hex readout |
| of the kernel text section. Reading this several times then |
| using diff utilities on the output can show which kernel |
| text is being corrupted. Also allows kernel text section |
| snapshots to be taken for analysis in the troubleshooting |
| crash handler. |
| |
| config KERNEL_TEXT_SNAPSHOT_COUNT |
| int "Number of snapshots to hold" |
| default 2 |
| depends on KERNEL_TEXT_SNAPSHOTS |
| help |
| How many kernel text section snapshots to keep. More can be |
| added if suspicious of particular areas of code corrupting |
| and before and after shots are desired to check. Each snapshot |
| adds several MB of data size. |
| |
| config ARCH_RUBY_EMAC_LIB |
| tristate "Common Arasan EMAC routines for Ruby / Topaz" |
| default y |
| help |
| Routines common to Ruby and Topaz EMAC drivers. Includes PHY |
| routines, initialization, PHY/MII/MDIO routines. |
| |
| config ARCH_RUBY_EMAC |
| tristate "Ruby Arasan EMAC driver" |
| default y |
| select ARCH_RUBY_EMAC_LIB |
| help |
| Ruby Arasan EMAC AHB driver |
| |
| config ARCH_RUBY_EMAC_SMOOTHING |
| bool "Enable Arasan EMAC traffic bursts smoothing" |
| default y |
| depends on ARCH_RUBY_EMAC |
| |
| config ARCH_RUBY_EMAC_SMOOTHING_BURST_SIZE |
| int "Number of packets per burst" |
| default 48 |
| depends on ARCH_RUBY_EMAC_SMOOTHING |
| |
| config ARCH_RUBY_EMAC_SMOOTHING_RATE |
| int "Number of packets per second" |
| default 50000 |
| depends on ARCH_RUBY_EMAC_SMOOTHING |
| |
| config QUANTENNA_RESTRICT_WLAN_IP |
| bool "Restrict incoming IP packets on the WLAN interface for RGMII bridge operation" |
| default n |
| help |
| Restrict the incoming IP traffic on the WLAN interface to prevent access to the |
| bridge interface on RGMII boards. |
| |
| config SWITCH_RTL8365MB |
| tristate "Realtek RTL8365MB switch" |
| default n |
| depends on ARCH_RUBY_EMAC |
| help |
| Realtek RTL8365MB driver |
| |
| config SWITCH_RTL8363SB |
| tristate "Realtek RTL8363SB switch" |
| default n |
| depends on ARCH_RUBY_EMAC |
| help |
| Realtek RTL8363SB driver |
| |
| config QTN_SKB_RECYCLE |
| bool "Support of QTN SKB recycle" |
| default n |
| |
| endmenu |
| |
