| /* |
| * Copyright © 2008-2015 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| */ |
| |
| #include "intel_drv.h" |
| |
| static void |
| intel_get_adjust_train(struct intel_dp *intel_dp, |
| const uint8_t link_status[DP_LINK_STATUS_SIZE]) |
| { |
| uint8_t v = 0; |
| uint8_t p = 0; |
| int lane; |
| uint8_t voltage_max; |
| uint8_t preemph_max; |
| |
| for (lane = 0; lane < intel_dp->lane_count; lane++) { |
| uint8_t this_v = drm_dp_get_adjust_request_voltage(link_status, lane); |
| uint8_t this_p = drm_dp_get_adjust_request_pre_emphasis(link_status, lane); |
| |
| if (this_v > v) |
| v = this_v; |
| if (this_p > p) |
| p = this_p; |
| } |
| |
| voltage_max = intel_dp_voltage_max(intel_dp); |
| if (v >= voltage_max) |
| v = voltage_max | DP_TRAIN_MAX_SWING_REACHED; |
| |
| preemph_max = intel_dp_pre_emphasis_max(intel_dp, v); |
| if (p >= preemph_max) |
| p = preemph_max | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; |
| |
| for (lane = 0; lane < 4; lane++) |
| intel_dp->train_set[lane] = v | p; |
| } |
| |
| static bool |
| intel_dp_set_link_train(struct intel_dp *intel_dp, |
| uint8_t dp_train_pat) |
| { |
| uint8_t buf[sizeof(intel_dp->train_set) + 1]; |
| int ret, len; |
| |
| intel_dp_program_link_training_pattern(intel_dp, dp_train_pat); |
| |
| buf[0] = dp_train_pat; |
| if ((dp_train_pat & DP_TRAINING_PATTERN_MASK) == |
| DP_TRAINING_PATTERN_DISABLE) { |
| /* don't write DP_TRAINING_LANEx_SET on disable */ |
| len = 1; |
| } else { |
| /* DP_TRAINING_LANEx_SET follow DP_TRAINING_PATTERN_SET */ |
| memcpy(buf + 1, intel_dp->train_set, intel_dp->lane_count); |
| len = intel_dp->lane_count + 1; |
| } |
| |
| ret = drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_PATTERN_SET, |
| buf, len); |
| |
| return ret == len; |
| } |
| |
| static bool |
| intel_dp_reset_link_train(struct intel_dp *intel_dp, |
| uint8_t dp_train_pat) |
| { |
| memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set)); |
| intel_dp_set_signal_levels(intel_dp); |
| return intel_dp_set_link_train(intel_dp, dp_train_pat); |
| } |
| |
| static bool |
| intel_dp_update_link_train(struct intel_dp *intel_dp) |
| { |
| int ret; |
| |
| intel_dp_set_signal_levels(intel_dp); |
| |
| ret = drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_LANE0_SET, |
| intel_dp->train_set, intel_dp->lane_count); |
| |
| return ret == intel_dp->lane_count; |
| } |
| |
| /* Enable corresponding port and start training pattern 1 */ |
| static void |
| intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp) |
| { |
| int i; |
| uint8_t voltage; |
| int voltage_tries, loop_tries; |
| uint8_t link_config[2]; |
| uint8_t link_bw, rate_select; |
| |
| if (intel_dp->prepare_link_retrain) |
| intel_dp->prepare_link_retrain(intel_dp); |
| |
| intel_dp_compute_rate(intel_dp, intel_dp->link_rate, |
| &link_bw, &rate_select); |
| |
| /* Write the link configuration data */ |
| link_config[0] = link_bw; |
| link_config[1] = intel_dp->lane_count; |
| if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) |
| link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; |
| drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, 2); |
| if (intel_dp->num_sink_rates) |
| drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_RATE_SET, |
| &rate_select, 1); |
| |
| link_config[0] = 0; |
| link_config[1] = DP_SET_ANSI_8B10B; |
| drm_dp_dpcd_write(&intel_dp->aux, DP_DOWNSPREAD_CTRL, link_config, 2); |
| |
| intel_dp->DP |= DP_PORT_EN; |
| |
| /* clock recovery */ |
| if (!intel_dp_reset_link_train(intel_dp, |
| DP_TRAINING_PATTERN_1 | |
| DP_LINK_SCRAMBLING_DISABLE)) { |
| DRM_ERROR("failed to enable link training\n"); |
| return; |
| } |
| |
| voltage = 0xff; |
| voltage_tries = 0; |
| loop_tries = 0; |
| for (;;) { |
| uint8_t link_status[DP_LINK_STATUS_SIZE]; |
| |
| drm_dp_link_train_clock_recovery_delay(intel_dp->dpcd); |
| if (!intel_dp_get_link_status(intel_dp, link_status)) { |
| DRM_ERROR("failed to get link status\n"); |
| break; |
| } |
| |
| if (drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) { |
| DRM_DEBUG_KMS("clock recovery OK\n"); |
| break; |
| } |
| |
| /* Check to see if we've tried the max voltage */ |
| for (i = 0; i < intel_dp->lane_count; i++) |
| if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) |
| break; |
| if (i == intel_dp->lane_count) { |
| ++loop_tries; |
| if (loop_tries == 5) { |
| DRM_ERROR("too many full retries, give up\n"); |
| break; |
| } |
| intel_dp_reset_link_train(intel_dp, |
| DP_TRAINING_PATTERN_1 | |
| DP_LINK_SCRAMBLING_DISABLE); |
| voltage_tries = 0; |
| continue; |
| } |
| |
| /* Check to see if we've tried the same voltage 5 times */ |
| if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { |
| ++voltage_tries; |
| if (voltage_tries == 5) { |
| DRM_ERROR("too many voltage retries, give up\n"); |
| break; |
| } |
| } else |
| voltage_tries = 0; |
| voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; |
| |
| /* Update training set as requested by target */ |
| intel_get_adjust_train(intel_dp, link_status); |
| if (!intel_dp_update_link_train(intel_dp)) { |
| DRM_ERROR("failed to update link training\n"); |
| break; |
| } |
| } |
| } |
| |
| /* |
| * Pick training pattern for channel equalization. Training Pattern 3 for HBR2 |
| * or 1.2 devices that support it, Training Pattern 2 otherwise. |
| */ |
| static u32 intel_dp_training_pattern(struct intel_dp *intel_dp) |
| { |
| u32 training_pattern = DP_TRAINING_PATTERN_2; |
| bool source_tps3, sink_tps3; |
| |
| /* |
| * Intel platforms that support HBR2 also support TPS3. TPS3 support is |
| * also mandatory for downstream devices that support HBR2. However, not |
| * all sinks follow the spec. |
| * |
| * Due to WaDisableHBR2 SKL < B0 is the only exception where TPS3 is |
| * supported in source but still not enabled. |
| */ |
| source_tps3 = intel_dp_source_supports_hbr2(intel_dp); |
| sink_tps3 = drm_dp_tps3_supported(intel_dp->dpcd); |
| |
| if (source_tps3 && sink_tps3) { |
| training_pattern = DP_TRAINING_PATTERN_3; |
| } else if (intel_dp->link_rate == 540000) { |
| if (!source_tps3) |
| DRM_DEBUG_KMS("5.4 Gbps link rate without source HBR2/TPS3 support\n"); |
| if (!sink_tps3) |
| DRM_DEBUG_KMS("5.4 Gbps link rate without sink TPS3 support\n"); |
| } |
| |
| return training_pattern; |
| } |
| |
| static void |
| intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp) |
| { |
| bool channel_eq = false; |
| int tries, cr_tries; |
| u32 training_pattern; |
| |
| training_pattern = intel_dp_training_pattern(intel_dp); |
| |
| /* channel equalization */ |
| if (!intel_dp_set_link_train(intel_dp, |
| training_pattern | |
| DP_LINK_SCRAMBLING_DISABLE)) { |
| DRM_ERROR("failed to start channel equalization\n"); |
| return; |
| } |
| |
| tries = 0; |
| cr_tries = 0; |
| channel_eq = false; |
| for (;;) { |
| uint8_t link_status[DP_LINK_STATUS_SIZE]; |
| |
| if (cr_tries > 5) { |
| DRM_ERROR("failed to train DP, aborting\n"); |
| break; |
| } |
| |
| drm_dp_link_train_channel_eq_delay(intel_dp->dpcd); |
| if (!intel_dp_get_link_status(intel_dp, link_status)) { |
| DRM_ERROR("failed to get link status\n"); |
| break; |
| } |
| |
| /* Make sure clock is still ok */ |
| if (!drm_dp_clock_recovery_ok(link_status, |
| intel_dp->lane_count)) { |
| intel_dp_link_training_clock_recovery(intel_dp); |
| intel_dp_set_link_train(intel_dp, |
| training_pattern | |
| DP_LINK_SCRAMBLING_DISABLE); |
| cr_tries++; |
| continue; |
| } |
| |
| if (drm_dp_channel_eq_ok(link_status, |
| intel_dp->lane_count)) { |
| channel_eq = true; |
| break; |
| } |
| |
| /* Try 5 times, then try clock recovery if that fails */ |
| if (tries > 5) { |
| intel_dp_link_training_clock_recovery(intel_dp); |
| intel_dp_set_link_train(intel_dp, |
| training_pattern | |
| DP_LINK_SCRAMBLING_DISABLE); |
| tries = 0; |
| cr_tries++; |
| continue; |
| } |
| |
| /* Update training set as requested by target */ |
| intel_get_adjust_train(intel_dp, link_status); |
| if (!intel_dp_update_link_train(intel_dp)) { |
| DRM_ERROR("failed to update link training\n"); |
| break; |
| } |
| ++tries; |
| } |
| |
| intel_dp_set_idle_link_train(intel_dp); |
| |
| if (channel_eq) |
| DRM_DEBUG_KMS("Channel EQ done. DP Training successful\n"); |
| } |
| |
| void intel_dp_stop_link_train(struct intel_dp *intel_dp) |
| { |
| intel_dp_set_link_train(intel_dp, |
| DP_TRAINING_PATTERN_DISABLE); |
| } |
| |
| void |
| intel_dp_start_link_train(struct intel_dp *intel_dp) |
| { |
| intel_dp_link_training_clock_recovery(intel_dp); |
| intel_dp_link_training_channel_equalization(intel_dp); |
| } |