| /* |
| * Copyright (C) 2004-2006 Atmel Corporation |
| * |
| * Based on linux/arch/sh/mm/fault.c: |
| * Copyright (C) 1999 Niibe Yutaka |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/mm.h> |
| #include <linux/module.h> |
| #include <linux/pagemap.h> |
| #include <linux/kdebug.h> |
| #include <linux/kprobes.h> |
| #include <linux/uaccess.h> |
| |
| #include <asm/mmu_context.h> |
| #include <asm/sysreg.h> |
| #include <asm/tlb.h> |
| |
| #ifdef CONFIG_KPROBES |
| static inline int notify_page_fault(struct pt_regs *regs, int trap) |
| { |
| int ret = 0; |
| |
| if (!user_mode(regs)) { |
| if (kprobe_running() && kprobe_fault_handler(regs, trap)) |
| ret = 1; |
| } |
| |
| return ret; |
| } |
| #else |
| static inline int notify_page_fault(struct pt_regs *regs, int trap) |
| { |
| return 0; |
| } |
| #endif |
| |
| int exception_trace = 1; |
| |
| /* |
| * This routine handles page faults. It determines the address and the |
| * problem, and then passes it off to one of the appropriate routines. |
| * |
| * ecr is the Exception Cause Register. Possible values are: |
| * 6: Protection fault (instruction access) |
| * 15: Protection fault (read access) |
| * 16: Protection fault (write access) |
| * 20: Page not found (instruction access) |
| * 24: Page not found (read access) |
| * 28: Page not found (write access) |
| */ |
| asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs) |
| { |
| struct task_struct *tsk; |
| struct mm_struct *mm; |
| struct vm_area_struct *vma; |
| const struct exception_table_entry *fixup; |
| unsigned long address; |
| unsigned long page; |
| long signr; |
| int code; |
| int fault; |
| unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; |
| |
| if (notify_page_fault(regs, ecr)) |
| return; |
| |
| address = sysreg_read(TLBEAR); |
| |
| tsk = current; |
| mm = tsk->mm; |
| |
| signr = SIGSEGV; |
| code = SEGV_MAPERR; |
| |
| /* |
| * If we're in an interrupt or have no user context, we must |
| * not take the fault... |
| */ |
| if (faulthandler_disabled() || !mm || regs->sr & SYSREG_BIT(GM)) |
| goto no_context; |
| |
| local_irq_enable(); |
| |
| if (user_mode(regs)) |
| flags |= FAULT_FLAG_USER; |
| retry: |
| down_read(&mm->mmap_sem); |
| |
| vma = find_vma(mm, address); |
| if (!vma) |
| goto bad_area; |
| if (vma->vm_start <= address) |
| goto good_area; |
| if (!(vma->vm_flags & VM_GROWSDOWN)) |
| goto bad_area; |
| if (expand_stack(vma, address)) |
| goto bad_area; |
| |
| /* |
| * Ok, we have a good vm_area for this memory access, so we |
| * can handle it... |
| */ |
| good_area: |
| code = SEGV_ACCERR; |
| |
| switch (ecr) { |
| case ECR_PROTECTION_X: |
| case ECR_TLB_MISS_X: |
| if (!(vma->vm_flags & VM_EXEC)) |
| goto bad_area; |
| break; |
| case ECR_PROTECTION_R: |
| case ECR_TLB_MISS_R: |
| if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC))) |
| goto bad_area; |
| break; |
| case ECR_PROTECTION_W: |
| case ECR_TLB_MISS_W: |
| if (!(vma->vm_flags & VM_WRITE)) |
| goto bad_area; |
| flags |= FAULT_FLAG_WRITE; |
| break; |
| default: |
| panic("Unhandled case %lu in do_page_fault!", ecr); |
| } |
| |
| /* |
| * If for any reason at all we couldn't handle the fault, make |
| * sure we exit gracefully rather than endlessly redo the |
| * fault. |
| */ |
| fault = handle_mm_fault(mm, vma, address, flags); |
| |
| if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) |
| return; |
| |
| if (unlikely(fault & VM_FAULT_ERROR)) { |
| if (fault & VM_FAULT_OOM) |
| goto out_of_memory; |
| else if (fault & VM_FAULT_SIGSEGV) |
| goto bad_area; |
| else if (fault & VM_FAULT_SIGBUS) |
| goto do_sigbus; |
| BUG(); |
| } |
| |
| if (flags & FAULT_FLAG_ALLOW_RETRY) { |
| if (fault & VM_FAULT_MAJOR) |
| tsk->maj_flt++; |
| else |
| tsk->min_flt++; |
| if (fault & VM_FAULT_RETRY) { |
| flags &= ~FAULT_FLAG_ALLOW_RETRY; |
| flags |= FAULT_FLAG_TRIED; |
| |
| /* |
| * No need to up_read(&mm->mmap_sem) as we would have |
| * already released it in __lock_page_or_retry() in |
| * mm/filemap.c. |
| */ |
| goto retry; |
| } |
| } |
| |
| up_read(&mm->mmap_sem); |
| return; |
| |
| /* |
| * Something tried to access memory that isn't in our memory |
| * map. Fix it, but check if it's kernel or user first... |
| */ |
| bad_area: |
| up_read(&mm->mmap_sem); |
| |
| if (user_mode(regs)) { |
| if (exception_trace && printk_ratelimit()) |
| printk("%s%s[%d]: segfault at %08lx pc %08lx " |
| "sp %08lx ecr %lu\n", |
| is_global_init(tsk) ? KERN_EMERG : KERN_INFO, |
| tsk->comm, tsk->pid, address, regs->pc, |
| regs->sp, ecr); |
| _exception(SIGSEGV, regs, code, address); |
| return; |
| } |
| |
| no_context: |
| /* Are we prepared to handle this kernel fault? */ |
| fixup = search_exception_tables(regs->pc); |
| if (fixup) { |
| regs->pc = fixup->fixup; |
| return; |
| } |
| |
| /* |
| * Oops. The kernel tried to access some bad page. We'll have |
| * to terminate things with extreme prejudice. |
| */ |
| if (address < PAGE_SIZE) |
| printk(KERN_ALERT |
| "Unable to handle kernel NULL pointer dereference"); |
| else |
| printk(KERN_ALERT |
| "Unable to handle kernel paging request"); |
| printk(" at virtual address %08lx\n", address); |
| |
| page = sysreg_read(PTBR); |
| printk(KERN_ALERT "ptbr = %08lx", page); |
| if (address >= TASK_SIZE) |
| page = (unsigned long)swapper_pg_dir; |
| if (page) { |
| page = ((unsigned long *)page)[address >> 22]; |
| printk(" pgd = %08lx", page); |
| if (page & _PAGE_PRESENT) { |
| page &= PAGE_MASK; |
| address &= 0x003ff000; |
| page = ((unsigned long *)__va(page))[address >> PAGE_SHIFT]; |
| printk(" pte = %08lx", page); |
| } |
| } |
| printk("\n"); |
| die("Kernel access of bad area", regs, signr); |
| return; |
| |
| /* |
| * We ran out of memory, or some other thing happened to us |
| * that made us unable to handle the page fault gracefully. |
| */ |
| out_of_memory: |
| up_read(&mm->mmap_sem); |
| if (!user_mode(regs)) |
| goto no_context; |
| pagefault_out_of_memory(); |
| return; |
| |
| do_sigbus: |
| up_read(&mm->mmap_sem); |
| |
| /* Kernel mode? Handle exceptions or die */ |
| signr = SIGBUS; |
| code = BUS_ADRERR; |
| if (!user_mode(regs)) |
| goto no_context; |
| |
| if (exception_trace) |
| printk("%s%s[%d]: bus error at %08lx pc %08lx " |
| "sp %08lx ecr %lu\n", |
| is_global_init(tsk) ? KERN_EMERG : KERN_INFO, |
| tsk->comm, tsk->pid, address, regs->pc, |
| regs->sp, ecr); |
| |
| _exception(SIGBUS, regs, BUS_ADRERR, address); |
| } |
| |
| asmlinkage void do_bus_error(unsigned long addr, int write_access, |
| struct pt_regs *regs) |
| { |
| printk(KERN_ALERT |
| "Bus error at physical address 0x%08lx (%s access)\n", |
| addr, write_access ? "write" : "read"); |
| printk(KERN_INFO "DTLB dump:\n"); |
| dump_dtlb(); |
| die("Bus Error", regs, SIGKILL); |
| } |