arch/arm/mach-pxa/am300epd.c - kernel/quantenna - Git at Google

 /*
  * am300epd.c -- Platform device for AM300 EPD kit
  *
  * Copyright (C) 2008, Jaya Kumar
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file COPYING in the main directory of this archive for
  * more details.
  *
  * This work was made possible by help and equipment support from E-Ink
  * Corporation. http://support.eink.com/community
  *
  * This driver is written to be used with the Broadsheet display controller.
  * on the AM300 EPD prototype kit/development kit with an E-Ink 800x600
  * Vizplex EPD on a Gumstix board using the Broadsheet interface board.
  *
  */

 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>

 #include "gumstix.h"
 #include "mfp-pxa25x.h"
 #include <mach/irqs.h>
 #include <linux/platform_data/video-pxafb.h>

 #include "generic.h"

 #include <video/broadsheetfb.h>

 static unsigned int panel_type = 6;
 static struct platform_device *am300_device;
 static struct broadsheet_board am300_board;

 static unsigned long am300_pin_config[] __initdata = {
 	GPIO16_GPIO,
 	GPIO17_GPIO,
 	GPIO32_GPIO,
 	GPIO48_GPIO,
 	GPIO49_GPIO,
 	GPIO51_GPIO,
 	GPIO74_GPIO,
 	GPIO75_GPIO,
 	GPIO76_GPIO,
 	GPIO77_GPIO,

 	/* this is the 16-bit hdb bus 58-73 */
 	GPIO58_GPIO,
 	GPIO59_GPIO,
 	GPIO60_GPIO,
 	GPIO61_GPIO,

 	GPIO62_GPIO,
 	GPIO63_GPIO,
 	GPIO64_GPIO,
 	GPIO65_GPIO,

 	GPIO66_GPIO,
 	GPIO67_GPIO,
 	GPIO68_GPIO,
 	GPIO69_GPIO,

 	GPIO70_GPIO,
 	GPIO71_GPIO,
 	GPIO72_GPIO,
 	GPIO73_GPIO,
 };

 /* register offsets for gpio control */
 #define PWR_GPIO_PIN	16
 #define CFG_GPIO_PIN	17
 #define RDY_GPIO_PIN	32
 #define DC_GPIO_PIN	48
 #define RST_GPIO_PIN	49
 #define LED_GPIO_PIN	51
 #define RD_GPIO_PIN	74
 #define WR_GPIO_PIN	75
 #define CS_GPIO_PIN	76
 #define IRQ_GPIO_PIN	77

 /* hdb bus */
 #define DB0_GPIO_PIN	58
 #define DB15_GPIO_PIN	73

 static int gpios[] = { PWR_GPIO_PIN, CFG_GPIO_PIN, RDY_GPIO_PIN, DC_GPIO_PIN,
 			RST_GPIO_PIN, RD_GPIO_PIN, WR_GPIO_PIN, CS_GPIO_PIN,
 			IRQ_GPIO_PIN, LED_GPIO_PIN };
 static char *gpio_names[] = { "PWR", "CFG", "RDY", "DC", "RST", "RD", "WR",
 				"CS", "IRQ", "LED" };

 static int am300_wait_event(struct broadsheetfb_par *par)
 {
 	/* todo: improve err recovery */
 	wait_event(par->waitq, gpio_get_value(RDY_GPIO_PIN));
 	return 0;
 }

 static int am300_init_gpio_regs(struct broadsheetfb_par *par)
 {
 	int i;
 	int err;
 	char dbname[8];

 	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
 		err = gpio_request(gpios[i], gpio_names[i]);
 		if (err) {
 			dev_err(&am300_device->dev, "failed requesting "
 				"gpio %s, err=%d\n", gpio_names[i], err);
 			goto err_req_gpio;
 		}
 	}

 	/* we also need to take care of the hdb bus */
 	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) {
 		sprintf(dbname, "DB%d", i);
 		err = gpio_request(i, dbname);
 		if (err) {
 			dev_err(&am300_device->dev, "failed requesting "
 				"gpio %d, err=%d\n", i, err);
 			goto err_req_gpio2;
 		}
 	}

 	/* setup the outputs and init values */
 	gpio_direction_output(PWR_GPIO_PIN, 0);
 	gpio_direction_output(CFG_GPIO_PIN, 1);
 	gpio_direction_output(DC_GPIO_PIN, 0);
 	gpio_direction_output(RD_GPIO_PIN, 1);
 	gpio_direction_output(WR_GPIO_PIN, 1);
 	gpio_direction_output(CS_GPIO_PIN, 1);
 	gpio_direction_output(RST_GPIO_PIN, 0);

 	/* setup the inputs */
 	gpio_direction_input(RDY_GPIO_PIN);
 	gpio_direction_input(IRQ_GPIO_PIN);

 	/* start the hdb bus as an input */
 	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
 		gpio_direction_output(i, 0);

 	/* go into command mode */
 	gpio_set_value(CFG_GPIO_PIN, 1);
 	gpio_set_value(RST_GPIO_PIN, 0);
 	msleep(10);
 	gpio_set_value(RST_GPIO_PIN, 1);
 	msleep(10);
 	am300_wait_event(par);

 	return 0;

 err_req_gpio2:
 	while (--i >= DB0_GPIO_PIN)
 		gpio_free(i);
 	i = ARRAY_SIZE(gpios);
 err_req_gpio:
 	while (--i >= 0)
 		gpio_free(gpios[i]);

 	return err;
 }

 static int am300_init_board(struct broadsheetfb_par *par)
 {
 	return am300_init_gpio_regs(par);
 }

 static void am300_cleanup(struct broadsheetfb_par *par)
 {
 	int i;

 	free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);

 	for (i = 0; i < ARRAY_SIZE(gpios); i++)
 		gpio_free(gpios[i]);

 	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
 		gpio_free(i);

 }

 static u16 am300_get_hdb(struct broadsheetfb_par *par)
 {
 	u16 res = 0;
 	int i;

 	for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
 		res |= (gpio_get_value(DB0_GPIO_PIN + i)) ? (1 << i) : 0;

 	return res;
 }

 static void am300_set_hdb(struct broadsheetfb_par *par, u16 data)
 {
 	int i;

 	for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
 		gpio_set_value(DB0_GPIO_PIN + i, (data >> i) & 0x01);
 }


 static void am300_set_ctl(struct broadsheetfb_par *par, unsigned char bit,
 				u8 state)
 {
 	switch (bit) {
 	case BS_CS:
 		gpio_set_value(CS_GPIO_PIN, state);
 		break;
 	case BS_DC:
 		gpio_set_value(DC_GPIO_PIN, state);
 		break;
 	case BS_WR:
 		gpio_set_value(WR_GPIO_PIN, state);
 		break;
 	}
 }

 static int am300_get_panel_type(void)
 {
 	return panel_type;
 }

 static irqreturn_t am300_handle_irq(int irq, void *dev_id)
 {
 	struct broadsheetfb_par *par = dev_id;

 	wake_up(&par->waitq);
 	return IRQ_HANDLED;
 }

 static int am300_setup_irq(struct fb_info *info)
 {
 	int ret;
 	struct broadsheetfb_par *par = info->par;

 	ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am300_handle_irq,
 				IRQF_TRIGGER_RISING, "AM300", par);
 	if (ret)
 		dev_err(&am300_device->dev, "request_irq failed: %d\n", ret);

 	return ret;
 }

 static struct broadsheet_board am300_board = {
 	.owner			= THIS_MODULE,
 	.init			= am300_init_board,
 	.cleanup		= am300_cleanup,
 	.set_hdb		= am300_set_hdb,
 	.get_hdb		= am300_get_hdb,
 	.set_ctl		= am300_set_ctl,
 	.wait_for_rdy		= am300_wait_event,
 	.get_panel_type		= am300_get_panel_type,
 	.setup_irq		= am300_setup_irq,
 };

 int __init am300_init(void)
 {
 	int ret;

 	pxa2xx_mfp_config(ARRAY_AND_SIZE(am300_pin_config));

 	/* request our platform independent driver */
 	request_module("broadsheetfb");

 	am300_device = platform_device_alloc("broadsheetfb", -1);
 	if (!am300_device)
 		return -ENOMEM;

 	/* the am300_board that will be seen by broadsheetfb is a copy */
 	platform_device_add_data(am300_device, &am300_board,
 					sizeof(am300_board));

 	ret = platform_device_add(am300_device);

 	if (ret) {
 		platform_device_put(am300_device);
 		return ret;
 	}

 	return 0;
 }

 module_param(panel_type, uint, 0);
 MODULE_PARM_DESC(panel_type, "Select the panel type: 37, 6, 97");

 MODULE_DESCRIPTION("board driver for am300 epd kit");
 MODULE_AUTHOR("Jaya Kumar");
 MODULE_LICENSE("GPL");
	/*
	* am300epd.c -- Platform device for AM300 EPD kit
	*
	* Copyright (C) 2008, Jaya Kumar
	*
	* This file is subject to the terms and conditions of the GNU General Public
	* License. See the file COPYING in the main directory of this archive for
	* more details.
	*
	* This work was made possible by help and equipment support from E-Ink
	* Corporation. http://support.eink.com/community
	*
	* This driver is written to be used with the Broadsheet display controller.
	* on the AM300 EPD prototype kit/development kit with an E-Ink 800x600
	* Vizplex EPD on a Gumstix board using the Broadsheet interface board.
	*
	*/

	#include <linux/module.h>
	#include <linux/kernel.h>
	#include <linux/errno.h>
	#include <linux/string.h>
	#include <linux/delay.h>
	#include <linux/interrupt.h>
	#include <linux/fb.h>
	#include <linux/init.h>
	#include <linux/platform_device.h>
	#include <linux/irq.h>
	#include <linux/gpio.h>

	#include "gumstix.h"
	#include "mfp-pxa25x.h"
	#include <mach/irqs.h>
	#include <linux/platform_data/video-pxafb.h>

	#include "generic.h"

	#include <video/broadsheetfb.h>

	static unsigned int panel_type = 6;
	static struct platform_device *am300_device;
	static struct broadsheet_board am300_board;

	static unsigned long am300_pin_config[] __initdata = {
	GPIO16_GPIO,
	GPIO17_GPIO,
	GPIO32_GPIO,
	GPIO48_GPIO,
	GPIO49_GPIO,
	GPIO51_GPIO,
	GPIO74_GPIO,
	GPIO75_GPIO,
	GPIO76_GPIO,
	GPIO77_GPIO,

	/* this is the 16-bit hdb bus 58-73 */
	GPIO58_GPIO,
	GPIO59_GPIO,
	GPIO60_GPIO,
	GPIO61_GPIO,

	GPIO62_GPIO,
	GPIO63_GPIO,
	GPIO64_GPIO,
	GPIO65_GPIO,

	GPIO66_GPIO,
	GPIO67_GPIO,
	GPIO68_GPIO,
	GPIO69_GPIO,

	GPIO70_GPIO,
	GPIO71_GPIO,
	GPIO72_GPIO,
	GPIO73_GPIO,
	};

	/* register offsets for gpio control */
	#define PWR_GPIO_PIN 16
	#define CFG_GPIO_PIN 17
	#define RDY_GPIO_PIN 32
	#define DC_GPIO_PIN 48
	#define RST_GPIO_PIN 49
	#define LED_GPIO_PIN 51
	#define RD_GPIO_PIN 74
	#define WR_GPIO_PIN 75
	#define CS_GPIO_PIN 76
	#define IRQ_GPIO_PIN 77

	/* hdb bus */
	#define DB0_GPIO_PIN 58
	#define DB15_GPIO_PIN 73

	static int gpios[] = { PWR_GPIO_PIN, CFG_GPIO_PIN, RDY_GPIO_PIN, DC_GPIO_PIN,
	RST_GPIO_PIN, RD_GPIO_PIN, WR_GPIO_PIN, CS_GPIO_PIN,
	IRQ_GPIO_PIN, LED_GPIO_PIN };
	static char *gpio_names[] = { "PWR", "CFG", "RDY", "DC", "RST", "RD", "WR",
	"CS", "IRQ", "LED" };

	static int am300_wait_event(struct broadsheetfb_par *par)
	{
	/* todo: improve err recovery */
	wait_event(par->waitq, gpio_get_value(RDY_GPIO_PIN));
	return 0;
	}

	static int am300_init_gpio_regs(struct broadsheetfb_par *par)
	{
	int i;
	int err;
	char dbname[8];

	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
	err = gpio_request(gpios[i], gpio_names[i]);
	if (err) {
	dev_err(&am300_device->dev, "failed requesting "
	"gpio %s, err=%d\n", gpio_names[i], err);
	goto err_req_gpio;
	}
	}

	/* we also need to take care of the hdb bus */
	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) {
	sprintf(dbname, "DB%d", i);
	err = gpio_request(i, dbname);
	if (err) {
	dev_err(&am300_device->dev, "failed requesting "
	"gpio %d, err=%d\n", i, err);
	goto err_req_gpio2;
	}
	}

	/* setup the outputs and init values */
	gpio_direction_output(PWR_GPIO_PIN, 0);
	gpio_direction_output(CFG_GPIO_PIN, 1);
	gpio_direction_output(DC_GPIO_PIN, 0);
	gpio_direction_output(RD_GPIO_PIN, 1);
	gpio_direction_output(WR_GPIO_PIN, 1);
	gpio_direction_output(CS_GPIO_PIN, 1);
	gpio_direction_output(RST_GPIO_PIN, 0);

	/* setup the inputs */
	gpio_direction_input(RDY_GPIO_PIN);
	gpio_direction_input(IRQ_GPIO_PIN);

	/* start the hdb bus as an input */
	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
	gpio_direction_output(i, 0);

	/* go into command mode */
	gpio_set_value(CFG_GPIO_PIN, 1);
	gpio_set_value(RST_GPIO_PIN, 0);
	msleep(10);
	gpio_set_value(RST_GPIO_PIN, 1);
	msleep(10);
	am300_wait_event(par);

	return 0;

	err_req_gpio2:
	while (--i >= DB0_GPIO_PIN)
	gpio_free(i);
	i = ARRAY_SIZE(gpios);
	err_req_gpio:
	while (--i >= 0)
	gpio_free(gpios[i]);

	return err;
	}

	static int am300_init_board(struct broadsheetfb_par *par)
	{
	return am300_init_gpio_regs(par);
	}

	static void am300_cleanup(struct broadsheetfb_par *par)
	{
	int i;

	free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);

	for (i = 0; i < ARRAY_SIZE(gpios); i++)
	gpio_free(gpios[i]);

	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
	gpio_free(i);

	}

	static u16 am300_get_hdb(struct broadsheetfb_par *par)
	{
	u16 res = 0;
	int i;

	for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
	res \|= (gpio_get_value(DB0_GPIO_PIN + i)) ? (1 << i) : 0;

	return res;
	}

	static void am300_set_hdb(struct broadsheetfb_par *par, u16 data)
	{
	int i;

	for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
	gpio_set_value(DB0_GPIO_PIN + i, (data >> i) & 0x01);
	}


	static void am300_set_ctl(struct broadsheetfb_par *par, unsigned char bit,
	u8 state)
	{
	switch (bit) {
	case BS_CS:
	gpio_set_value(CS_GPIO_PIN, state);
	break;
	case BS_DC:
	gpio_set_value(DC_GPIO_PIN, state);
	break;
	case BS_WR:
	gpio_set_value(WR_GPIO_PIN, state);
	break;
	}
	}

	static int am300_get_panel_type(void)
	{
	return panel_type;
	}

	static irqreturn_t am300_handle_irq(int irq, void *dev_id)
	{
	struct broadsheetfb_par *par = dev_id;

	wake_up(&par->waitq);
	return IRQ_HANDLED;
	}

	static int am300_setup_irq(struct fb_info *info)
	{
	int ret;
	struct broadsheetfb_par *par = info->par;

	ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am300_handle_irq,
	IRQF_TRIGGER_RISING, "AM300", par);
	if (ret)
	dev_err(&am300_device->dev, "request_irq failed: %d\n", ret);

	return ret;
	}

	static struct broadsheet_board am300_board = {
	.owner = THIS_MODULE,
	.init = am300_init_board,
	.cleanup = am300_cleanup,
	.set_hdb = am300_set_hdb,
	.get_hdb = am300_get_hdb,
	.set_ctl = am300_set_ctl,
	.wait_for_rdy = am300_wait_event,
	.get_panel_type = am300_get_panel_type,
	.setup_irq = am300_setup_irq,
	};

	int __init am300_init(void)
	{
	int ret;

	pxa2xx_mfp_config(ARRAY_AND_SIZE(am300_pin_config));

	/* request our platform independent driver */
	request_module("broadsheetfb");

	am300_device = platform_device_alloc("broadsheetfb", -1);
	if (!am300_device)
	return -ENOMEM;

	/* the am300_board that will be seen by broadsheetfb is a copy */
	platform_device_add_data(am300_device, &am300_board,
	sizeof(am300_board));

	ret = platform_device_add(am300_device);

	if (ret) {
	platform_device_put(am300_device);
	return ret;
	}

	return 0;
	}

	module_param(panel_type, uint, 0);
	MODULE_PARM_DESC(panel_type, "Select the panel type: 37, 6, 97");

	MODULE_DESCRIPTION("board driver for am300 epd kit");
	MODULE_AUTHOR("Jaya Kumar");
	MODULE_LICENSE("GPL");