| /* |
| * linux/arch/arm/mach-clps711x/p720t.c |
| * |
| * Copyright (C) 2000-2001 Deep Blue Solutions Ltd |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/string.h> |
| #include <linux/mm.h> |
| #include <linux/io.h> |
| #include <linux/gpio.h> |
| #include <linux/slab.h> |
| #include <linux/leds.h> |
| #include <linux/sizes.h> |
| #include <linux/backlight.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/platform_device.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/mtd/nand-gpio.h> |
| |
| #include <mach/hardware.h> |
| #include <asm/pgtable.h> |
| #include <asm/page.h> |
| #include <asm/setup.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| |
| #include <video/platform_lcd.h> |
| |
| #include "common.h" |
| #include "devices.h" |
| |
| #define P720T_USERLED CLPS711X_GPIO(3, 0) |
| #define P720T_NAND_CLE CLPS711X_GPIO(4, 0) |
| #define P720T_NAND_ALE CLPS711X_GPIO(4, 1) |
| #define P720T_NAND_NCE CLPS711X_GPIO(4, 2) |
| |
| #define P720T_NAND_BASE (CLPS711X_SDRAM1_BASE) |
| |
| #define P720T_MMGPIO_BASE (CLPS711X_NR_GPIO) |
| |
| #define SYSPLD_PHYS_BASE IOMEM(CS1_PHYS_BASE) |
| |
| #define PLD_INT (SYSPLD_PHYS_BASE + 0x000000) |
| #define PLD_INT_MMGPIO_BASE (P720T_MMGPIO_BASE + 0) |
| #define PLD_INT_PENIRQ (PLD_INT_MMGPIO_BASE + 5) |
| #define PLD_INT_UCB_IRQ (PLD_INT_MMGPIO_BASE + 1) |
| #define PLD_INT_KBD_ATN (PLD_INT_MMGPIO_BASE + 0) /* EINT1 */ |
| |
| #define PLD_PWR (SYSPLD_PHYS_BASE + 0x000004) |
| #define PLD_PWR_MMGPIO_BASE (P720T_MMGPIO_BASE + 8) |
| #define PLD_PWR_EXT (PLD_PWR_MMGPIO_BASE + 5) |
| #define PLD_PWR_MODE (PLD_PWR_MMGPIO_BASE + 4) /* 1 = PWM, 0 = PFM */ |
| #define PLD_S4_ON (PLD_PWR_MMGPIO_BASE + 3) /* LCD bias voltage enable */ |
| #define PLD_S3_ON (PLD_PWR_MMGPIO_BASE + 2) /* LCD backlight enable */ |
| #define PLD_S2_ON (PLD_PWR_MMGPIO_BASE + 1) /* LCD 3V3 supply enable */ |
| #define PLD_S1_ON (PLD_PWR_MMGPIO_BASE + 0) /* LCD 3V supply enable */ |
| |
| #define PLD_KBD (SYSPLD_PHYS_BASE + 0x000008) |
| #define PLD_KBD_MMGPIO_BASE (P720T_MMGPIO_BASE + 16) |
| #define PLD_KBD_WAKE (PLD_KBD_MMGPIO_BASE + 1) |
| #define PLD_KBD_EN (PLD_KBD_MMGPIO_BASE + 0) |
| |
| #define PLD_SPI (SYSPLD_PHYS_BASE + 0x00000c) |
| #define PLD_SPI_MMGPIO_BASE (P720T_MMGPIO_BASE + 24) |
| #define PLD_SPI_EN (PLD_SPI_MMGPIO_BASE + 0) |
| |
| #define PLD_IO (SYSPLD_PHYS_BASE + 0x000010) |
| #define PLD_IO_MMGPIO_BASE (P720T_MMGPIO_BASE + 32) |
| #define PLD_IO_BOOTSEL (PLD_IO_MMGPIO_BASE + 6) /* Boot sel switch */ |
| #define PLD_IO_USER (PLD_IO_MMGPIO_BASE + 5) /* User defined switch */ |
| #define PLD_IO_LED3 (PLD_IO_MMGPIO_BASE + 4) |
| #define PLD_IO_LED2 (PLD_IO_MMGPIO_BASE + 3) |
| #define PLD_IO_LED1 (PLD_IO_MMGPIO_BASE + 2) |
| #define PLD_IO_LED0 (PLD_IO_MMGPIO_BASE + 1) |
| #define PLD_IO_LEDEN (PLD_IO_MMGPIO_BASE + 0) |
| |
| #define PLD_IRDA (SYSPLD_PHYS_BASE + 0x000014) |
| #define PLD_IRDA_MMGPIO_BASE (P720T_MMGPIO_BASE + 40) |
| #define PLD_IRDA_EN (PLD_IRDA_MMGPIO_BASE + 0) |
| |
| #define PLD_COM2 (SYSPLD_PHYS_BASE + 0x000018) |
| #define PLD_COM2_MMGPIO_BASE (P720T_MMGPIO_BASE + 48) |
| #define PLD_COM2_EN (PLD_COM2_MMGPIO_BASE + 0) |
| |
| #define PLD_COM1 (SYSPLD_PHYS_BASE + 0x00001c) |
| #define PLD_COM1_MMGPIO_BASE (P720T_MMGPIO_BASE + 56) |
| #define PLD_COM1_EN (PLD_COM1_MMGPIO_BASE + 0) |
| |
| #define PLD_AUD (SYSPLD_PHYS_BASE + 0x000020) |
| #define PLD_AUD_MMGPIO_BASE (P720T_MMGPIO_BASE + 64) |
| #define PLD_AUD_DIV1 (PLD_AUD_MMGPIO_BASE + 6) |
| #define PLD_AUD_DIV0 (PLD_AUD_MMGPIO_BASE + 5) |
| #define PLD_AUD_CLK_SEL1 (PLD_AUD_MMGPIO_BASE + 4) |
| #define PLD_AUD_CLK_SEL0 (PLD_AUD_MMGPIO_BASE + 3) |
| #define PLD_AUD_MIC_PWR (PLD_AUD_MMGPIO_BASE + 2) |
| #define PLD_AUD_MIC_GAIN (PLD_AUD_MMGPIO_BASE + 1) |
| #define PLD_AUD_CODEC_EN (PLD_AUD_MMGPIO_BASE + 0) |
| |
| #define PLD_CF (SYSPLD_PHYS_BASE + 0x000024) |
| #define PLD_CF_MMGPIO_BASE (P720T_MMGPIO_BASE + 72) |
| #define PLD_CF2_SLEEP (PLD_CF_MMGPIO_BASE + 5) |
| #define PLD_CF1_SLEEP (PLD_CF_MMGPIO_BASE + 4) |
| #define PLD_CF2_nPDREQ (PLD_CF_MMGPIO_BASE + 3) |
| #define PLD_CF1_nPDREQ (PLD_CF_MMGPIO_BASE + 2) |
| #define PLD_CF2_nIRQ (PLD_CF_MMGPIO_BASE + 1) |
| #define PLD_CF1_nIRQ (PLD_CF_MMGPIO_BASE + 0) |
| |
| #define PLD_SDC (SYSPLD_PHYS_BASE + 0x000028) |
| #define PLD_SDC_MMGPIO_BASE (P720T_MMGPIO_BASE + 80) |
| #define PLD_SDC_INT_EN (PLD_SDC_MMGPIO_BASE + 2) |
| #define PLD_SDC_WP (PLD_SDC_MMGPIO_BASE + 1) |
| #define PLD_SDC_CD (PLD_SDC_MMGPIO_BASE + 0) |
| |
| #define PLD_CODEC (SYSPLD_PHYS_BASE + 0x400000) |
| #define PLD_CODEC_MMGPIO_BASE (P720T_MMGPIO_BASE + 88) |
| #define PLD_CODEC_IRQ3 (PLD_CODEC_MMGPIO_BASE + 4) |
| #define PLD_CODEC_IRQ2 (PLD_CODEC_MMGPIO_BASE + 3) |
| #define PLD_CODEC_IRQ1 (PLD_CODEC_MMGPIO_BASE + 2) |
| #define PLD_CODEC_EN (PLD_CODEC_MMGPIO_BASE + 0) |
| |
| #define PLD_BRITE (SYSPLD_PHYS_BASE + 0x400004) |
| #define PLD_BRITE_MMGPIO_BASE (P720T_MMGPIO_BASE + 96) |
| #define PLD_BRITE_UP (PLD_BRITE_MMGPIO_BASE + 1) |
| #define PLD_BRITE_DN (PLD_BRITE_MMGPIO_BASE + 0) |
| |
| #define PLD_LCDEN (SYSPLD_PHYS_BASE + 0x400008) |
| #define PLD_LCDEN_MMGPIO_BASE (P720T_MMGPIO_BASE + 104) |
| #define PLD_LCDEN_EN (PLD_LCDEN_MMGPIO_BASE + 0) |
| |
| #define PLD_TCH (SYSPLD_PHYS_BASE + 0x400010) |
| #define PLD_TCH_MMGPIO_BASE (P720T_MMGPIO_BASE + 112) |
| #define PLD_TCH_PENIRQ (PLD_TCH_MMGPIO_BASE + 1) |
| #define PLD_TCH_EN (PLD_TCH_MMGPIO_BASE + 0) |
| |
| #define PLD_GPIO (SYSPLD_PHYS_BASE + 0x400014) |
| #define PLD_GPIO_MMGPIO_BASE (P720T_MMGPIO_BASE + 120) |
| #define PLD_GPIO2 (PLD_GPIO_MMGPIO_BASE + 2) |
| #define PLD_GPIO1 (PLD_GPIO_MMGPIO_BASE + 1) |
| #define PLD_GPIO0 (PLD_GPIO_MMGPIO_BASE + 0) |
| |
| static struct gpio p720t_gpios[] __initconst = { |
| { PLD_S1_ON, GPIOF_OUT_INIT_LOW, "PLD_S1_ON" }, |
| { PLD_S2_ON, GPIOF_OUT_INIT_LOW, "PLD_S2_ON" }, |
| { PLD_S3_ON, GPIOF_OUT_INIT_LOW, "PLD_S3_ON" }, |
| { PLD_S4_ON, GPIOF_OUT_INIT_LOW, "PLD_S4_ON" }, |
| { PLD_KBD_EN, GPIOF_OUT_INIT_LOW, "PLD_KBD_EN" }, |
| { PLD_SPI_EN, GPIOF_OUT_INIT_LOW, "PLD_SPI_EN" }, |
| { PLD_IO_USER, GPIOF_OUT_INIT_LOW, "PLD_IO_USER" }, |
| { PLD_IO_LED0, GPIOF_OUT_INIT_LOW, "PLD_IO_LED0" }, |
| { PLD_IO_LED1, GPIOF_OUT_INIT_LOW, "PLD_IO_LED1" }, |
| { PLD_IO_LED2, GPIOF_OUT_INIT_LOW, "PLD_IO_LED2" }, |
| { PLD_IO_LED3, GPIOF_OUT_INIT_LOW, "PLD_IO_LED3" }, |
| { PLD_IO_LEDEN, GPIOF_OUT_INIT_LOW, "PLD_IO_LEDEN" }, |
| { PLD_IRDA_EN, GPIOF_OUT_INIT_LOW, "PLD_IRDA_EN" }, |
| { PLD_COM1_EN, GPIOF_OUT_INIT_HIGH, "PLD_COM1_EN" }, |
| { PLD_COM2_EN, GPIOF_OUT_INIT_HIGH, "PLD_COM2_EN" }, |
| { PLD_CODEC_EN, GPIOF_OUT_INIT_LOW, "PLD_CODEC_EN" }, |
| { PLD_LCDEN_EN, GPIOF_OUT_INIT_LOW, "PLD_LCDEN_EN" }, |
| { PLD_TCH_EN, GPIOF_OUT_INIT_LOW, "PLD_TCH_EN" }, |
| { P720T_USERLED,GPIOF_OUT_INIT_LOW, "USER_LED" }, |
| }; |
| |
| static struct resource p720t_mmgpio_resource[] __initdata = { |
| DEFINE_RES_MEM_NAMED(0, 4, "dat"), |
| }; |
| |
| static struct bgpio_pdata p720t_mmgpio_pdata = { |
| .ngpio = 8, |
| }; |
| |
| static struct platform_device p720t_mmgpio __initdata = { |
| .name = "basic-mmio-gpio", |
| .id = -1, |
| .resource = p720t_mmgpio_resource, |
| .num_resources = ARRAY_SIZE(p720t_mmgpio_resource), |
| .dev = { |
| .platform_data = &p720t_mmgpio_pdata, |
| }, |
| }; |
| |
| static void __init p720t_mmgpio_init(void __iomem *addrbase, int gpiobase) |
| { |
| p720t_mmgpio_resource[0].start = (unsigned long)addrbase; |
| p720t_mmgpio_pdata.base = gpiobase; |
| |
| platform_device_register(&p720t_mmgpio); |
| } |
| |
| static struct { |
| void __iomem *addrbase; |
| int gpiobase; |
| } mmgpios[] __initconst = { |
| { PLD_INT, PLD_INT_MMGPIO_BASE }, |
| { PLD_PWR, PLD_PWR_MMGPIO_BASE }, |
| { PLD_KBD, PLD_KBD_MMGPIO_BASE }, |
| { PLD_SPI, PLD_SPI_MMGPIO_BASE }, |
| { PLD_IO, PLD_IO_MMGPIO_BASE }, |
| { PLD_IRDA, PLD_IRDA_MMGPIO_BASE }, |
| { PLD_COM2, PLD_COM2_MMGPIO_BASE }, |
| { PLD_COM1, PLD_COM1_MMGPIO_BASE }, |
| { PLD_AUD, PLD_AUD_MMGPIO_BASE }, |
| { PLD_CF, PLD_CF_MMGPIO_BASE }, |
| { PLD_SDC, PLD_SDC_MMGPIO_BASE }, |
| { PLD_CODEC, PLD_CODEC_MMGPIO_BASE }, |
| { PLD_BRITE, PLD_BRITE_MMGPIO_BASE }, |
| { PLD_LCDEN, PLD_LCDEN_MMGPIO_BASE }, |
| { PLD_TCH, PLD_TCH_MMGPIO_BASE }, |
| { PLD_GPIO, PLD_GPIO_MMGPIO_BASE }, |
| }; |
| |
| static struct resource p720t_nand_resource[] __initdata = { |
| DEFINE_RES_MEM(P720T_NAND_BASE, SZ_4), |
| }; |
| |
| static struct mtd_partition p720t_nand_parts[] __initdata = { |
| { |
| .name = "Flash partition 1", |
| .offset = 0, |
| .size = SZ_2M, |
| }, |
| { |
| .name = "Flash partition 2", |
| .offset = MTDPART_OFS_APPEND, |
| .size = MTDPART_SIZ_FULL, |
| }, |
| }; |
| |
| static struct gpio_nand_platdata p720t_nand_pdata __initdata = { |
| .gpio_rdy = -1, |
| .gpio_nce = P720T_NAND_NCE, |
| .gpio_ale = P720T_NAND_ALE, |
| .gpio_cle = P720T_NAND_CLE, |
| .gpio_nwp = -1, |
| .chip_delay = 15, |
| .parts = p720t_nand_parts, |
| .num_parts = ARRAY_SIZE(p720t_nand_parts), |
| }; |
| |
| static struct platform_device p720t_nand_pdev __initdata = { |
| .name = "gpio-nand", |
| .id = -1, |
| .resource = p720t_nand_resource, |
| .num_resources = ARRAY_SIZE(p720t_nand_resource), |
| .dev = { |
| .platform_data = &p720t_nand_pdata, |
| }, |
| }; |
| |
| static void p720t_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) |
| { |
| if (power) { |
| gpio_set_value(PLD_LCDEN_EN, 1); |
| gpio_set_value(PLD_S1_ON, 1); |
| gpio_set_value(PLD_S2_ON, 1); |
| gpio_set_value(PLD_S4_ON, 1); |
| } else { |
| gpio_set_value(PLD_S1_ON, 0); |
| gpio_set_value(PLD_S2_ON, 0); |
| gpio_set_value(PLD_S4_ON, 0); |
| gpio_set_value(PLD_LCDEN_EN, 0); |
| } |
| } |
| |
| static struct plat_lcd_data p720t_lcd_power_pdata = { |
| .set_power = p720t_lcd_power_set, |
| }; |
| |
| static void p720t_lcd_backlight_set_intensity(int intensity) |
| { |
| gpio_set_value(PLD_S3_ON, intensity); |
| } |
| |
| static struct generic_bl_info p720t_lcd_backlight_pdata = { |
| .name = "lcd-backlight.0", |
| .default_intensity = 0x01, |
| .max_intensity = 0x01, |
| .set_bl_intensity = p720t_lcd_backlight_set_intensity, |
| }; |
| |
| static void __init |
| fixup_p720t(struct tag *tag, char **cmdline) |
| { |
| /* |
| * Our bootloader doesn't setup any tags (yet). |
| */ |
| if (tag->hdr.tag != ATAG_CORE) { |
| tag->hdr.tag = ATAG_CORE; |
| tag->hdr.size = tag_size(tag_core); |
| tag->u.core.flags = 0; |
| tag->u.core.pagesize = PAGE_SIZE; |
| tag->u.core.rootdev = 0x0100; |
| |
| tag = tag_next(tag); |
| tag->hdr.tag = ATAG_MEM; |
| tag->hdr.size = tag_size(tag_mem32); |
| tag->u.mem.size = 4096; |
| tag->u.mem.start = PHYS_OFFSET; |
| |
| tag = tag_next(tag); |
| tag->hdr.tag = ATAG_NONE; |
| tag->hdr.size = 0; |
| } |
| } |
| |
| static struct gpio_led p720t_gpio_leds[] = { |
| { |
| .name = "User LED", |
| .default_trigger = "heartbeat", |
| .gpio = P720T_USERLED, |
| }, |
| }; |
| |
| static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = { |
| .leds = p720t_gpio_leds, |
| .num_leds = ARRAY_SIZE(p720t_gpio_leds), |
| }; |
| |
| static void __init p720t_init(void) |
| { |
| int i; |
| |
| clps711x_devices_init(); |
| |
| for (i = 0; i < ARRAY_SIZE(mmgpios); i++) |
| p720t_mmgpio_init(mmgpios[i].addrbase, mmgpios[i].gpiobase); |
| |
| platform_device_register(&p720t_nand_pdev); |
| } |
| |
| static void __init p720t_init_late(void) |
| { |
| WARN_ON(gpio_request_array(p720t_gpios, ARRAY_SIZE(p720t_gpios))); |
| |
| platform_device_register_data(NULL, "platform-lcd", 0, |
| &p720t_lcd_power_pdata, |
| sizeof(p720t_lcd_power_pdata)); |
| platform_device_register_data(NULL, "generic-bl", 0, |
| &p720t_lcd_backlight_pdata, |
| sizeof(p720t_lcd_backlight_pdata)); |
| platform_device_register_simple("video-clps711x", 0, NULL, 0); |
| platform_device_register_data(NULL, "leds-gpio", 0, |
| &p720t_gpio_led_pdata, |
| sizeof(p720t_gpio_led_pdata)); |
| } |
| |
| MACHINE_START(P720T, "ARM-Prospector720T") |
| /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ |
| .atag_offset = 0x100, |
| .fixup = fixup_p720t, |
| .map_io = clps711x_map_io, |
| .init_irq = clps711x_init_irq, |
| .init_time = clps711x_timer_init, |
| .init_machine = p720t_init, |
| .init_late = p720t_init_late, |
| .restart = clps711x_restart, |
| MACHINE_END |