blob: 71b4a8af9d4dcdf1dcec434b6be98636f468b2dd [file] [log] [blame]
# Makefile for the different targets used to generate full packages of a kernel
# It uses the generic clean infrastructure of kbuild
# RPM target
# ---------------------------------------------------------------------------
# The rpm target generates two rpm files:
# /usr/src/packages/SRPMS/kernel-2.6.7rc2-1.src.rpm
# /usr/src/packages/RPMS/i386/kernel-2.6.7rc2-1.<arch>.rpm
# The src.rpm files includes all source for the kernel being built
# The <arch>.rpm includes kernel configuration, modules etc.
#
# Process to create the rpm files
# a) clean the kernel
# b) Generate .spec file
# c) Build a tar ball, using symlink to make kernel version
# first entry in the path
# d) and pack the result to a tar.gz file
# e) generate the rpm files, based on kernel.spec
# - Use /. to avoid tar packing just the symlink
# Note that the rpm-pkg target cannot be used with KBUILD_OUTPUT,
# but the binrpm-pkg target can; for some reason O= gets ignored.
# Remove hyphens since they have special meaning in RPM filenames
KERNELPATH := kernel-$(subst -,_,$(KERNELRELEASE))
KDEB_SOURCENAME ?= linux-$(KERNELRELEASE)
export KDEB_SOURCENAME
# Include only those top-level files that are needed by make, plus the GPL copy
TAR_CONTENT := $(KBUILD_ALLDIRS) .config .scmversion Makefile \
Kbuild Kconfig COPYING $(wildcard localversion*)
MKSPEC := $(srctree)/scripts/package/mkspec
quiet_cmd_src_tar = TAR $(2).tar.gz
cmd_src_tar = \
if test "$(objtree)" != "$(srctree)"; then \
echo "Building source tarball is not possible outside the"; \
echo "kernel source tree. Don't set KBUILD_OUTPUT, or use the"; \
echo "binrpm-pkg or bindeb-pkg target instead."; \
false; \
fi ; \
$(srctree)/scripts/setlocalversion --save-scmversion; \
ln -sf $(srctree) $(2); \
tar -cz $(RCS_TAR_IGNORE) -f $(2).tar.gz \
$(addprefix $(2)/,$(TAR_CONTENT) $(3)); \
rm -f $(2) $(objtree)/.scmversion
# rpm-pkg
# ---------------------------------------------------------------------------
rpm-pkg rpm: FORCE
$(MAKE) clean
$(CONFIG_SHELL) $(MKSPEC) >$(objtree)/kernel.spec
$(call cmd,src_tar,$(KERNELPATH),kernel.spec)
$(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version
mv -f $(objtree)/.tmp_version $(objtree)/.version
rpmbuild $(RPMOPTS) --target $(UTS_MACHINE) -ta $(KERNELPATH).tar.gz
rm $(KERNELPATH).tar.gz kernel.spec
# binrpm-pkg
# ---------------------------------------------------------------------------
binrpm-pkg: FORCE
$(MAKE) KBUILD_SRC=
$(CONFIG_SHELL) $(MKSPEC) prebuilt > $(objtree)/binkernel.spec
$(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version
mv -f $(objtree)/.tmp_version $(objtree)/.version
rpmbuild $(RPMOPTS) --define "_builddir $(objtree)" --target \
$(UTS_MACHINE) -bb $(objtree)/binkernel.spec
rm binkernel.spec
# Deb target
# ---------------------------------------------------------------------------
quiet_cmd_builddeb = BUILDDEB
cmd_builddeb = set -e; \
test `id -u` = 0 || \
test -n "$(KBUILD_PKG_ROOTCMD)" || { \
which fakeroot >/dev/null 2>&1 && \
KBUILD_PKG_ROOTCMD="fakeroot -u"; \
} || { \
echo; \
echo "builddeb must be run as root (or using fakeroot)."; \
echo "KBUILD_PKG_ROOTCMD is unset and fakeroot not found."; \
echo "Try setting KBUILD_PKG_ROOTCMD to a command to acquire"; \
echo "root privileges (e.g., 'fakeroot -u' or 'sudo')."; \
false; \
} && \
\
$$KBUILD_PKG_ROOTCMD $(CONFIG_SHELL) \
$(srctree)/scripts/package/builddeb $@
deb-pkg: FORCE
$(MAKE) clean
$(call cmd,src_tar,$(KDEB_SOURCENAME))
$(MAKE) KBUILD_SRC=
+$(call cmd,builddeb)
bindeb-pkg: FORCE
$(MAKE) KBUILD_SRC=
+$(call cmd,builddeb)
clean-dirs += $(objtree)/debian/
# tarball targets
# ---------------------------------------------------------------------------
tar%pkg: FORCE
$(MAKE) KBUILD_SRC=
$(CONFIG_SHELL) $(srctree)/scripts/package/buildtar $@
clean-dirs += $(objtree)/tar-install/
# perf-pkg - generate a source tarball with perf source
# ---------------------------------------------------------------------------
perf-tar=perf-$(KERNELVERSION)
quiet_cmd_perf_tar = TAR
cmd_perf_tar = \
git --git-dir=$(srctree)/.git archive --prefix=$(perf-tar)/ \
HEAD^{tree} $$(cd $(srctree); \
echo $$(cat tools/perf/MANIFEST)) \
-o $(perf-tar).tar; \
mkdir -p $(perf-tar); \
git --git-dir=$(srctree)/.git rev-parse HEAD > $(perf-tar)/HEAD; \
(cd $(srctree)/tools/perf; \
util/PERF-VERSION-GEN $(CURDIR)/$(perf-tar)/); \
tar rf $(perf-tar).tar $(perf-tar)/HEAD $(perf-tar)/PERF-VERSION-FILE; \
rm -r $(perf-tar); \
$(if $(findstring tar-src,$@),, \
$(if $(findstring bz2,$@),bzip2, \
$(if $(findstring gz,$@),gzip, \
$(if $(findstring xz,$@),xz, \
$(error unknown target $@)))) \
-f -9 $(perf-tar).tar)
perf-%pkg: FORCE
$(call cmd,perf_tar)
# Help text displayed when executing 'make help'
# ---------------------------------------------------------------------------
help: FORCE
@echo ' rpm-pkg - Build both source and binary RPM kernel packages'
@echo ' binrpm-pkg - Build only the binary kernel RPM package'
@echo ' deb-pkg - Build both source and binary deb kernel packages'
@echo ' bindeb-pkg - Build only the binary kernel deb package'
@echo ' tar-pkg - Build the kernel as an uncompressed tarball'
@echo ' targz-pkg - Build the kernel as a gzip compressed tarball'
@echo ' tarbz2-pkg - Build the kernel as a bzip2 compressed tarball'
@echo ' tarxz-pkg - Build the kernel as a xz compressed tarball'
@echo ' perf-tar-src-pkg - Build $(perf-tar).tar source tarball'
@echo ' perf-targz-src-pkg - Build $(perf-tar).tar.gz source tarball'
@echo ' perf-tarbz2-src-pkg - Build $(perf-tar).tar.bz2 source tarball'
@echo ' perf-tarxz-src-pkg - Build $(perf-tar).tar.xz source tarball'