drivers/staging/fbtft/fb_tls8204.c

/*
 * FB driver for the TLS8204 LCD Controller
 *
 * The display is monochrome and the video memory is RGB565.
 * Any pixel value except 0 turns the pixel on.
 *
 * Copyright (C) 2013 Noralf Tronnes
 * Copyright (C) 2014 Michael Hope (adapted for the TLS8204)
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>

#include "fbtft.h"

#define DRVNAME		"fb_tls8204"
#define WIDTH		84
#define HEIGHT		48
#define TXBUFLEN	WIDTH

/* gamma is used to control contrast in this driver */
#define DEFAULT_GAMMA	"40"

static unsigned bs = 4;
module_param(bs, uint, 0);
MODULE_PARM_DESC(bs, "BS[2:0] Bias voltage level: 0-7 (default: 4)");

static int init_display(struct fbtft_par *par)
{
	par->fbtftops.reset(par);

	/* Enter extended command mode */
	write_reg(par, 0x21); /* 5:1  1
				 2:0  PD - Powerdown control: chip is active
				 1:0  V  - Entry mode: horizontal addressing
				 0:1  H  - Extended instruction set control:
						extended
			      */

	/* H=1 Bias system */
	write_reg(par, 0x10 | (bs & 0x7)); /*
				 4:1  1
				 3:0  0
				 2:x  BS2 - Bias System
				 1:x  BS1
				 0:x  BS0
			      */

	/* Set the address of the first display line. */
	write_reg(par, 0x04 | (64 >> 6));
	write_reg(par, 0x40 | (64 & 0x3F));

	/* Enter H=0 standard command mode */
	write_reg(par, 0x20);

	/* H=0 Display control */
	write_reg(par, 0x08 | 4); /*
				 3:1  1
				 2:1  D  - DE: 10=normal mode
				 1:0  0
				 0:0  E
			      */

	return 0;
}

static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
{
	/* H=0 Set X address of RAM */
	write_reg(par, 0x80); /* 7:1  1
				 6-0: X[6:0] - 0x00
			      */

	/* H=0 Set Y address of RAM */
	write_reg(par, 0x40); /* 7:0  0
				 6:1  1
				 2-0: Y[2:0] - 0x0
			      */
}

static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
{
	u16 *vmem16 = (u16 *)par->info->screen_buffer;
	int x, y, i;
	int ret = 0;

	for (y = 0; y < HEIGHT / 8; y++) {
		u8 *buf = par->txbuf.buf;
		/* The display is 102x68 but the LCD is 84x48.  Set
		   the write pointer at the start of each row. */
		gpio_set_value(par->gpio.dc, 0);
		write_reg(par, 0x80 | 0);
		write_reg(par, 0x40 | y);

		for (x = 0; x < WIDTH; x++) {
			u8 ch = 0;

			for (i = 0; i < 8 * WIDTH; i += WIDTH) {
				ch >>= 1;
				if (vmem16[(y * 8 * WIDTH) + i + x])
					ch |= 0x80;
			}
			*buf++ = ch;
		}
		/* Write the row */
		gpio_set_value(par->gpio.dc, 1);
		ret = par->fbtftops.write(par, par->txbuf.buf, WIDTH);
		if (ret < 0) {
			dev_err(par->info->device,
				"write failed and returned: %d\n", ret);
			break;
		}
	}

	return ret;
}

static int set_gamma(struct fbtft_par *par, unsigned long *curves)
{
	/* apply mask */
	curves[0] &= 0x7F;

	write_reg(par, 0x21); /* turn on extended instruction set */
	write_reg(par, 0x80 | curves[0]);
	write_reg(par, 0x20); /* turn off extended instruction set */

	return 0;
}

static struct fbtft_display display = {
	.regwidth = 8,
	.width = WIDTH,
	.height = HEIGHT,
	.txbuflen = TXBUFLEN,
	.gamma_num = 1,
	.gamma_len = 1,
	.gamma = DEFAULT_GAMMA,
	.fbtftops = {
		.init_display = init_display,
		.set_addr_win = set_addr_win,
		.write_vmem = write_vmem,
		.set_gamma = set_gamma,
	},
	.backlight = 1,
};

FBTFT_REGISTER_DRIVER(DRVNAME, "teralane,tls8204", &display);

MODULE_ALIAS("spi:" DRVNAME);
MODULE_ALIAS("spi:tls8204");

MODULE_DESCRIPTION("FB driver for the TLS8204 LCD Controller");
MODULE_AUTHOR("Michael Hope");
MODULE_LICENSE("GPL");