blob: 41b80ae2d5f8088cf703de6b74eacabcaebb2f3e [file] [log] [blame]
/******************************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 Intel Deutschland GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called COPYING.
*
* Contact Information:
* Intel Linux Wireless <linuxwifi@intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
* BSD LICENSE
*
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 Intel Deutschland GmbH
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __fw_api_h__
#define __fw_api_h__
#include "fw-api-rs.h"
#include "fw-api-rx.h"
#include "fw-api-tx.h"
#include "fw-api-sta.h"
#include "fw-api-mac.h"
#include "fw-api-power.h"
#include "fw-api-d3.h"
#include "fw-api-coex.h"
#include "fw-api-scan.h"
#include "fw-api-stats.h"
#include "fw-api-tof.h"
/* Tx queue numbers for non-DQA mode */
enum {
IWL_MVM_OFFCHANNEL_QUEUE = 8,
IWL_MVM_CMD_QUEUE = 9,
};
/*
* DQA queue numbers
*
* @IWL_MVM_DQA_CMD_QUEUE: a queue reserved for sending HCMDs to the FW
* @IWL_MVM_DQA_P2P_DEVICE_QUEUE: a queue reserved for P2P device frames
* @IWL_MVM_DQA_GCAST_QUEUE: a queue reserved for P2P GO/SoftAP GCAST frames
* @IWL_MVM_DQA_BSS_CLIENT_QUEUE: a queue reserved for BSS activity, to ensure
* that we are never left without the possibility to connect to an AP.
* @IWL_MVM_DQA_MIN_MGMT_QUEUE: first TXQ in pool for MGMT and non-QOS frames.
* Each MGMT queue is mapped to a single STA
* MGMT frames are frames that return true on ieee80211_is_mgmt()
* @IWL_MVM_DQA_MAX_MGMT_QUEUE: last TXQ in pool for MGMT frames
* @IWL_MVM_DQA_AP_PROBE_RESP_QUEUE: a queue reserved for P2P GO/SoftAP probe
* responses
* @IWL_MVM_DQA_MIN_DATA_QUEUE: first TXQ in pool for DATA frames.
* DATA frames are intended for !ieee80211_is_mgmt() frames, but if
* the MGMT TXQ pool is exhausted, mgmt frames can be sent on DATA queues
* as well
* @IWL_MVM_DQA_MAX_DATA_QUEUE: last TXQ in pool for DATA frames
*/
enum iwl_mvm_dqa_txq {
IWL_MVM_DQA_CMD_QUEUE = 0,
IWL_MVM_DQA_P2P_DEVICE_QUEUE = 2,
IWL_MVM_DQA_GCAST_QUEUE = 3,
IWL_MVM_DQA_BSS_CLIENT_QUEUE = 4,
IWL_MVM_DQA_MIN_MGMT_QUEUE = 5,
IWL_MVM_DQA_MAX_MGMT_QUEUE = 8,
IWL_MVM_DQA_AP_PROBE_RESP_QUEUE = 9,
IWL_MVM_DQA_MIN_DATA_QUEUE = 10,
IWL_MVM_DQA_MAX_DATA_QUEUE = 31,
};
enum iwl_mvm_tx_fifo {
IWL_MVM_TX_FIFO_BK = 0,
IWL_MVM_TX_FIFO_BE,
IWL_MVM_TX_FIFO_VI,
IWL_MVM_TX_FIFO_VO,
IWL_MVM_TX_FIFO_MCAST = 5,
IWL_MVM_TX_FIFO_CMD = 7,
};
#define IWL_MVM_STATION_COUNT 16
#define IWL_MVM_TDLS_STA_COUNT 4
/* commands */
enum {
MVM_ALIVE = 0x1,
REPLY_ERROR = 0x2,
ECHO_CMD = 0x3,
INIT_COMPLETE_NOTIF = 0x4,
/* PHY context commands */
PHY_CONTEXT_CMD = 0x8,
DBG_CFG = 0x9,
ANTENNA_COUPLING_NOTIFICATION = 0xa,
/* UMAC scan commands */
SCAN_ITERATION_COMPLETE_UMAC = 0xb5,
SCAN_CFG_CMD = 0xc,
SCAN_REQ_UMAC = 0xd,
SCAN_ABORT_UMAC = 0xe,
SCAN_COMPLETE_UMAC = 0xf,
BA_WINDOW_STATUS_NOTIFICATION_ID = 0x13,
/* station table */
ADD_STA_KEY = 0x17,
ADD_STA = 0x18,
REMOVE_STA = 0x19,
/* paging get item */
FW_GET_ITEM_CMD = 0x1a,
/* TX */
TX_CMD = 0x1c,
TXPATH_FLUSH = 0x1e,
MGMT_MCAST_KEY = 0x1f,
/* scheduler config */
SCD_QUEUE_CFG = 0x1d,
/* global key */
WEP_KEY = 0x20,
/* Memory */
SHARED_MEM_CFG = 0x25,
/* TDLS */
TDLS_CHANNEL_SWITCH_CMD = 0x27,
TDLS_CHANNEL_SWITCH_NOTIFICATION = 0xaa,
TDLS_CONFIG_CMD = 0xa7,
/* MAC and Binding commands */
MAC_CONTEXT_CMD = 0x28,
TIME_EVENT_CMD = 0x29, /* both CMD and response */
TIME_EVENT_NOTIFICATION = 0x2a,
BINDING_CONTEXT_CMD = 0x2b,
TIME_QUOTA_CMD = 0x2c,
NON_QOS_TX_COUNTER_CMD = 0x2d,
LQ_CMD = 0x4e,
/* paging block to FW cpu2 */
FW_PAGING_BLOCK_CMD = 0x4f,
/* Scan offload */
SCAN_OFFLOAD_REQUEST_CMD = 0x51,
SCAN_OFFLOAD_ABORT_CMD = 0x52,
HOT_SPOT_CMD = 0x53,
SCAN_OFFLOAD_COMPLETE = 0x6D,
SCAN_OFFLOAD_UPDATE_PROFILES_CMD = 0x6E,
SCAN_OFFLOAD_CONFIG_CMD = 0x6f,
MATCH_FOUND_NOTIFICATION = 0xd9,
SCAN_ITERATION_COMPLETE = 0xe7,
/* Phy */
PHY_CONFIGURATION_CMD = 0x6a,
CALIB_RES_NOTIF_PHY_DB = 0x6b,
/* PHY_DB_CMD = 0x6c, */
/* ToF - 802.11mc FTM */
TOF_CMD = 0x10,
TOF_NOTIFICATION = 0x11,
/* Power - legacy power table command */
POWER_TABLE_CMD = 0x77,
PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78,
LTR_CONFIG = 0xee,
/* Thermal Throttling*/
REPLY_THERMAL_MNG_BACKOFF = 0x7e,
/* Set/Get DC2DC frequency tune */
DC2DC_CONFIG_CMD = 0x83,
/* NVM */
NVM_ACCESS_CMD = 0x88,
SET_CALIB_DEFAULT_CMD = 0x8e,
BEACON_NOTIFICATION = 0x90,
BEACON_TEMPLATE_CMD = 0x91,
TX_ANT_CONFIGURATION_CMD = 0x98,
STATISTICS_CMD = 0x9c,
STATISTICS_NOTIFICATION = 0x9d,
EOSP_NOTIFICATION = 0x9e,
REDUCE_TX_POWER_CMD = 0x9f,
/* RF-KILL commands and notifications */
CARD_STATE_CMD = 0xa0,
CARD_STATE_NOTIFICATION = 0xa1,
MISSED_BEACONS_NOTIFICATION = 0xa2,
/* Power - new power table command */
MAC_PM_POWER_TABLE = 0xa9,
MFUART_LOAD_NOTIFICATION = 0xb1,
RSS_CONFIG_CMD = 0xb3,
REPLY_RX_PHY_CMD = 0xc0,
REPLY_RX_MPDU_CMD = 0xc1,
FRAME_RELEASE = 0xc3,
BA_NOTIF = 0xc5,
/* Location Aware Regulatory */
MCC_UPDATE_CMD = 0xc8,
MCC_CHUB_UPDATE_CMD = 0xc9,
MARKER_CMD = 0xcb,
/* BT Coex */
BT_COEX_PRIO_TABLE = 0xcc,
BT_COEX_PROT_ENV = 0xcd,
BT_PROFILE_NOTIFICATION = 0xce,
BT_CONFIG = 0x9b,
BT_COEX_UPDATE_SW_BOOST = 0x5a,
BT_COEX_UPDATE_CORUN_LUT = 0x5b,
BT_COEX_UPDATE_REDUCED_TXP = 0x5c,
BT_COEX_CI = 0x5d,
REPLY_SF_CFG_CMD = 0xd1,
REPLY_BEACON_FILTERING_CMD = 0xd2,
/* DTS measurements */
CMD_DTS_MEASUREMENT_TRIGGER = 0xdc,
DTS_MEASUREMENT_NOTIFICATION = 0xdd,
REPLY_DEBUG_CMD = 0xf0,
LDBG_CONFIG_CMD = 0xf6,
DEBUG_LOG_MSG = 0xf7,
BCAST_FILTER_CMD = 0xcf,
MCAST_FILTER_CMD = 0xd0,
/* D3 commands/notifications */
D3_CONFIG_CMD = 0xd3,
PROT_OFFLOAD_CONFIG_CMD = 0xd4,
OFFLOADS_QUERY_CMD = 0xd5,
REMOTE_WAKE_CONFIG_CMD = 0xd6,
D0I3_END_CMD = 0xed,
/* for WoWLAN in particular */
WOWLAN_PATTERNS = 0xe0,
WOWLAN_CONFIGURATION = 0xe1,
WOWLAN_TSC_RSC_PARAM = 0xe2,
WOWLAN_TKIP_PARAM = 0xe3,
WOWLAN_KEK_KCK_MATERIAL = 0xe4,
WOWLAN_GET_STATUSES = 0xe5,
WOWLAN_TX_POWER_PER_DB = 0xe6,
/* and for NetDetect */
SCAN_OFFLOAD_PROFILES_QUERY_CMD = 0x56,
SCAN_OFFLOAD_HOTSPOTS_CONFIG_CMD = 0x58,
SCAN_OFFLOAD_HOTSPOTS_QUERY_CMD = 0x59,
REPLY_MAX = 0xff,
};
/* Please keep this enum *SORTED* by hex value.
* Needed for binary search, otherwise a warning will be triggered.
*/
enum iwl_mac_conf_subcmd_ids {
LINK_QUALITY_MEASUREMENT_CMD = 0x1,
LINK_QUALITY_MEASUREMENT_COMPLETE_NOTIF = 0xFE,
};
enum iwl_phy_ops_subcmd_ids {
CMD_DTS_MEASUREMENT_TRIGGER_WIDE = 0x0,
CTDP_CONFIG_CMD = 0x03,
TEMP_REPORTING_THRESHOLDS_CMD = 0x04,
CT_KILL_NOTIFICATION = 0xFE,
DTS_MEASUREMENT_NOTIF_WIDE = 0xFF,
};
enum iwl_system_subcmd_ids {
SHARED_MEM_CFG_CMD = 0x0,
};
enum iwl_data_path_subcmd_ids {
UPDATE_MU_GROUPS_CMD = 0x1,
TRIGGER_RX_QUEUES_NOTIF_CMD = 0x2,
MU_GROUP_MGMT_NOTIF = 0xFE,
RX_QUEUES_NOTIFICATION = 0xFF,
};
enum iwl_prot_offload_subcmd_ids {
STORED_BEACON_NTF = 0xFF,
};
/* command groups */
enum {
LEGACY_GROUP = 0x0,
LONG_GROUP = 0x1,
SYSTEM_GROUP = 0x2,
MAC_CONF_GROUP = 0x3,
PHY_OPS_GROUP = 0x4,
DATA_PATH_GROUP = 0x5,
PROT_OFFLOAD_GROUP = 0xb,
};
/**
* struct iwl_cmd_response - generic response struct for most commands
* @status: status of the command asked, changes for each one
*/
struct iwl_cmd_response {
__le32 status;
};
/*
* struct iwl_tx_ant_cfg_cmd
* @valid: valid antenna configuration
*/
struct iwl_tx_ant_cfg_cmd {
__le32 valid;
} __packed;
/*
* Calibration control struct.
* Sent as part of the phy configuration command.
* @flow_trigger: bitmap for which calibrations to perform according to
* flow triggers.
* @event_trigger: bitmap for which calibrations to perform according to
* event triggers.
*/
struct iwl_calib_ctrl {
__le32 flow_trigger;
__le32 event_trigger;
} __packed;
/* This enum defines the bitmap of various calibrations to enable in both
* init ucode and runtime ucode through CALIBRATION_CFG_CMD.
*/
enum iwl_calib_cfg {
IWL_CALIB_CFG_XTAL_IDX = BIT(0),
IWL_CALIB_CFG_TEMPERATURE_IDX = BIT(1),
IWL_CALIB_CFG_VOLTAGE_READ_IDX = BIT(2),
IWL_CALIB_CFG_PAPD_IDX = BIT(3),
IWL_CALIB_CFG_TX_PWR_IDX = BIT(4),
IWL_CALIB_CFG_DC_IDX = BIT(5),
IWL_CALIB_CFG_BB_FILTER_IDX = BIT(6),
IWL_CALIB_CFG_LO_LEAKAGE_IDX = BIT(7),
IWL_CALIB_CFG_TX_IQ_IDX = BIT(8),
IWL_CALIB_CFG_TX_IQ_SKEW_IDX = BIT(9),
IWL_CALIB_CFG_RX_IQ_IDX = BIT(10),
IWL_CALIB_CFG_RX_IQ_SKEW_IDX = BIT(11),
IWL_CALIB_CFG_SENSITIVITY_IDX = BIT(12),
IWL_CALIB_CFG_CHAIN_NOISE_IDX = BIT(13),
IWL_CALIB_CFG_DISCONNECTED_ANT_IDX = BIT(14),
IWL_CALIB_CFG_ANT_COUPLING_IDX = BIT(15),
IWL_CALIB_CFG_DAC_IDX = BIT(16),
IWL_CALIB_CFG_ABS_IDX = BIT(17),
IWL_CALIB_CFG_AGC_IDX = BIT(18),
};
/*
* Phy configuration command.
*/
struct iwl_phy_cfg_cmd {
__le32 phy_cfg;
struct iwl_calib_ctrl calib_control;
} __packed;
#define PHY_CFG_RADIO_TYPE (BIT(0) | BIT(1))
#define PHY_CFG_RADIO_STEP (BIT(2) | BIT(3))
#define PHY_CFG_RADIO_DASH (BIT(4) | BIT(5))
#define PHY_CFG_PRODUCT_NUMBER (BIT(6) | BIT(7))
#define PHY_CFG_TX_CHAIN_A BIT(8)
#define PHY_CFG_TX_CHAIN_B BIT(9)
#define PHY_CFG_TX_CHAIN_C BIT(10)
#define PHY_CFG_RX_CHAIN_A BIT(12)
#define PHY_CFG_RX_CHAIN_B BIT(13)
#define PHY_CFG_RX_CHAIN_C BIT(14)
/* Target of the NVM_ACCESS_CMD */
enum {
NVM_ACCESS_TARGET_CACHE = 0,
NVM_ACCESS_TARGET_OTP = 1,
NVM_ACCESS_TARGET_EEPROM = 2,
};
/* Section types for NVM_ACCESS_CMD */
enum {
NVM_SECTION_TYPE_SW = 1,
NVM_SECTION_TYPE_REGULATORY = 3,
NVM_SECTION_TYPE_CALIBRATION = 4,
NVM_SECTION_TYPE_PRODUCTION = 5,
NVM_SECTION_TYPE_MAC_OVERRIDE = 11,
NVM_SECTION_TYPE_PHY_SKU = 12,
NVM_MAX_NUM_SECTIONS = 13,
};
/**
* struct iwl_nvm_access_cmd_ver2 - Request the device to send an NVM section
* @op_code: 0 - read, 1 - write
* @target: NVM_ACCESS_TARGET_*
* @type: NVM_SECTION_TYPE_*
* @offset: offset in bytes into the section
* @length: in bytes, to read/write
* @data: if write operation, the data to write. On read its empty
*/
struct iwl_nvm_access_cmd {
u8 op_code;
u8 target;
__le16 type;
__le16 offset;
__le16 length;
u8 data[];
} __packed; /* NVM_ACCESS_CMD_API_S_VER_2 */
#define NUM_OF_FW_PAGING_BLOCKS 33 /* 32 for data and 1 block for CSS */
/*
* struct iwl_fw_paging_cmd - paging layout
*
* (FW_PAGING_BLOCK_CMD = 0x4f)
*
* Send to FW the paging layout in the driver.
*
* @flags: various flags for the command
* @block_size: the block size in powers of 2
* @block_num: number of blocks specified in the command.
* @device_phy_addr: virtual addresses from device side
*/
struct iwl_fw_paging_cmd {
__le32 flags;
__le32 block_size;
__le32 block_num;
__le32 device_phy_addr[NUM_OF_FW_PAGING_BLOCKS];
} __packed; /* FW_PAGING_BLOCK_CMD_API_S_VER_1 */
/*
* Fw items ID's
*
* @IWL_FW_ITEM_ID_PAGING: Address of the pages that the FW will upload
* download
*/
enum iwl_fw_item_id {
IWL_FW_ITEM_ID_PAGING = 3,
};
/*
* struct iwl_fw_get_item_cmd - get an item from the fw
*/
struct iwl_fw_get_item_cmd {
__le32 item_id;
} __packed; /* FW_GET_ITEM_CMD_API_S_VER_1 */
#define CONT_REC_COMMAND_SIZE 80
#define ENABLE_CONT_RECORDING 0x15
#define DISABLE_CONT_RECORDING 0x16
/*
* struct iwl_continuous_record_mode - recording mode
*/
struct iwl_continuous_record_mode {
__le16 enable_recording;
} __packed;
/*
* struct iwl_continuous_record_cmd - enable/disable continuous recording
*/
struct iwl_continuous_record_cmd {
struct iwl_continuous_record_mode record_mode;
u8 pad[CONT_REC_COMMAND_SIZE -
sizeof(struct iwl_continuous_record_mode)];
} __packed;
struct iwl_fw_get_item_resp {
__le32 item_id;
__le32 item_byte_cnt;
__le32 item_val;
} __packed; /* FW_GET_ITEM_RSP_S_VER_1 */
/**
* struct iwl_nvm_access_resp_ver2 - response to NVM_ACCESS_CMD
* @offset: offset in bytes into the section
* @length: in bytes, either how much was written or read
* @type: NVM_SECTION_TYPE_*
* @status: 0 for success, fail otherwise
* @data: if read operation, the data returned. Empty on write.
*/
struct iwl_nvm_access_resp {
__le16 offset;
__le16 length;
__le16 type;
__le16 status;
u8 data[];
} __packed; /* NVM_ACCESS_CMD_RESP_API_S_VER_2 */
/* MVM_ALIVE 0x1 */
/* alive response is_valid values */
#define ALIVE_RESP_UCODE_OK BIT(0)
#define ALIVE_RESP_RFKILL BIT(1)
/* alive response ver_type values */
enum {
FW_TYPE_HW = 0,
FW_TYPE_PROT = 1,
FW_TYPE_AP = 2,
FW_TYPE_WOWLAN = 3,
FW_TYPE_TIMING = 4,
FW_TYPE_WIPAN = 5
};
/* alive response ver_subtype values */
enum {
FW_SUBTYPE_FULL_FEATURE = 0,
FW_SUBTYPE_BOOTSRAP = 1, /* Not valid */
FW_SUBTYPE_REDUCED = 2,
FW_SUBTYPE_ALIVE_ONLY = 3,
FW_SUBTYPE_WOWLAN = 4,
FW_SUBTYPE_AP_SUBTYPE = 5,
FW_SUBTYPE_WIPAN = 6,
FW_SUBTYPE_INITIALIZE = 9
};
#define IWL_ALIVE_STATUS_ERR 0xDEAD
#define IWL_ALIVE_STATUS_OK 0xCAFE
#define IWL_ALIVE_FLG_RFKILL BIT(0)
struct mvm_alive_resp_ver1 {
__le16 status;
__le16 flags;
u8 ucode_minor;
u8 ucode_major;
__le16 id;
u8 api_minor;
u8 api_major;
u8 ver_subtype;
u8 ver_type;
u8 mac;
u8 opt;
__le16 reserved2;
__le32 timestamp;
__le32 error_event_table_ptr; /* SRAM address for error log */
__le32 log_event_table_ptr; /* SRAM address for event log */
__le32 cpu_register_ptr;
__le32 dbgm_config_ptr;
__le32 alive_counter_ptr;
__le32 scd_base_ptr; /* SRAM address for SCD */
} __packed; /* ALIVE_RES_API_S_VER_1 */
struct mvm_alive_resp_ver2 {
__le16 status;
__le16 flags;
u8 ucode_minor;
u8 ucode_major;
__le16 id;
u8 api_minor;
u8 api_major;
u8 ver_subtype;
u8 ver_type;
u8 mac;
u8 opt;
__le16 reserved2;
__le32 timestamp;
__le32 error_event_table_ptr; /* SRAM address for error log */
__le32 log_event_table_ptr; /* SRAM address for LMAC event log */
__le32 cpu_register_ptr;
__le32 dbgm_config_ptr;
__le32 alive_counter_ptr;
__le32 scd_base_ptr; /* SRAM address for SCD */
__le32 st_fwrd_addr; /* pointer to Store and forward */
__le32 st_fwrd_size;
u8 umac_minor; /* UMAC version: minor */
u8 umac_major; /* UMAC version: major */
__le16 umac_id; /* UMAC version: id */
__le32 error_info_addr; /* SRAM address for UMAC error log */
__le32 dbg_print_buff_addr;
} __packed; /* ALIVE_RES_API_S_VER_2 */
struct mvm_alive_resp {
__le16 status;
__le16 flags;
__le32 ucode_minor;
__le32 ucode_major;
u8 ver_subtype;
u8 ver_type;
u8 mac;
u8 opt;
__le32 timestamp;
__le32 error_event_table_ptr; /* SRAM address for error log */
__le32 log_event_table_ptr; /* SRAM address for LMAC event log */
__le32 cpu_register_ptr;
__le32 dbgm_config_ptr;
__le32 alive_counter_ptr;
__le32 scd_base_ptr; /* SRAM address for SCD */
__le32 st_fwrd_addr; /* pointer to Store and forward */
__le32 st_fwrd_size;
__le32 umac_minor; /* UMAC version: minor */
__le32 umac_major; /* UMAC version: major */
__le32 error_info_addr; /* SRAM address for UMAC error log */
__le32 dbg_print_buff_addr;
} __packed; /* ALIVE_RES_API_S_VER_3 */
/* Error response/notification */
enum {
FW_ERR_UNKNOWN_CMD = 0x0,
FW_ERR_INVALID_CMD_PARAM = 0x1,
FW_ERR_SERVICE = 0x2,
FW_ERR_ARC_MEMORY = 0x3,
FW_ERR_ARC_CODE = 0x4,
FW_ERR_WATCH_DOG = 0x5,
FW_ERR_WEP_GRP_KEY_INDX = 0x10,
FW_ERR_WEP_KEY_SIZE = 0x11,
FW_ERR_OBSOLETE_FUNC = 0x12,
FW_ERR_UNEXPECTED = 0xFE,
FW_ERR_FATAL = 0xFF
};
/**
* struct iwl_error_resp - FW error indication
* ( REPLY_ERROR = 0x2 )
* @error_type: one of FW_ERR_*
* @cmd_id: the command ID for which the error occured
* @bad_cmd_seq_num: sequence number of the erroneous command
* @error_service: which service created the error, applicable only if
* error_type = 2, otherwise 0
* @timestamp: TSF in usecs.
*/
struct iwl_error_resp {
__le32 error_type;
u8 cmd_id;
u8 reserved1;
__le16 bad_cmd_seq_num;
__le32 error_service;
__le64 timestamp;
} __packed;
/* Common PHY, MAC and Bindings definitions */
#define MAX_MACS_IN_BINDING (3)
#define MAX_BINDINGS (4)
#define AUX_BINDING_INDEX (3)
#define MAX_PHYS (4)
/* Used to extract ID and color from the context dword */
#define FW_CTXT_ID_POS (0)
#define FW_CTXT_ID_MSK (0xff << FW_CTXT_ID_POS)
#define FW_CTXT_COLOR_POS (8)
#define FW_CTXT_COLOR_MSK (0xff << FW_CTXT_COLOR_POS)
#define FW_CTXT_INVALID (0xffffffff)
#define FW_CMD_ID_AND_COLOR(_id, _color) ((_id << FW_CTXT_ID_POS) |\
(_color << FW_CTXT_COLOR_POS))
/* Possible actions on PHYs, MACs and Bindings */
enum {
FW_CTXT_ACTION_STUB = 0,
FW_CTXT_ACTION_ADD,
FW_CTXT_ACTION_MODIFY,
FW_CTXT_ACTION_REMOVE,
FW_CTXT_ACTION_NUM
}; /* COMMON_CONTEXT_ACTION_API_E_VER_1 */
/* Time Events */
/* Time Event types, according to MAC type */
enum iwl_time_event_type {
/* BSS Station Events */
TE_BSS_STA_AGGRESSIVE_ASSOC,
TE_BSS_STA_ASSOC,
TE_BSS_EAP_DHCP_PROT,
TE_BSS_QUIET_PERIOD,
/* P2P Device Events */
TE_P2P_DEVICE_DISCOVERABLE,
TE_P2P_DEVICE_LISTEN,
TE_P2P_DEVICE_ACTION_SCAN,
TE_P2P_DEVICE_FULL_SCAN,
/* P2P Client Events */
TE_P2P_CLIENT_AGGRESSIVE_ASSOC,
TE_P2P_CLIENT_ASSOC,
TE_P2P_CLIENT_QUIET_PERIOD,
/* P2P GO Events */
TE_P2P_GO_ASSOC_PROT,
TE_P2P_GO_REPETITIVE_NOA,
TE_P2P_GO_CT_WINDOW,
/* WiDi Sync Events */
TE_WIDI_TX_SYNC,
/* Channel Switch NoA */
TE_CHANNEL_SWITCH_PERIOD,
TE_MAX
}; /* MAC_EVENT_TYPE_API_E_VER_1 */
/* Time event - defines for command API v1 */
/*
* @TE_V1_FRAG_NONE: fragmentation of the time event is NOT allowed.
* @TE_V1_FRAG_SINGLE: fragmentation of the time event is allowed, but only
* the first fragment is scheduled.
* @TE_V1_FRAG_DUAL: fragmentation of the time event is allowed, but only
* the first 2 fragments are scheduled.
* @TE_V1_FRAG_ENDLESS: fragmentation of the time event is allowed, and any
* number of fragments are valid.
*
* Other than the constant defined above, specifying a fragmentation value 'x'
* means that the event can be fragmented but only the first 'x' will be
* scheduled.
*/
enum {
TE_V1_FRAG_NONE = 0,
TE_V1_FRAG_SINGLE = 1,
TE_V1_FRAG_DUAL = 2,
TE_V1_FRAG_ENDLESS = 0xffffffff
};
/* If a Time Event can be fragmented, this is the max number of fragments */
#define TE_V1_FRAG_MAX_MSK 0x0fffffff
/* Repeat the time event endlessly (until removed) */
#define TE_V1_REPEAT_ENDLESS 0xffffffff
/* If a Time Event has bounded repetitions, this is the maximal value */
#define TE_V1_REPEAT_MAX_MSK_V1 0x0fffffff
/* Time Event dependencies: none, on another TE, or in a specific time */
enum {
TE_V1_INDEPENDENT = 0,
TE_V1_DEP_OTHER = BIT(0),
TE_V1_DEP_TSF = BIT(1),
TE_V1_EVENT_SOCIOPATHIC = BIT(2),
}; /* MAC_EVENT_DEPENDENCY_POLICY_API_E_VER_2 */
/*
* @TE_V1_NOTIF_NONE: no notifications
* @TE_V1_NOTIF_HOST_EVENT_START: request/receive notification on event start
* @TE_V1_NOTIF_HOST_EVENT_END:request/receive notification on event end
* @TE_V1_NOTIF_INTERNAL_EVENT_START: internal FW use
* @TE_V1_NOTIF_INTERNAL_EVENT_END: internal FW use.
* @TE_V1_NOTIF_HOST_FRAG_START: request/receive notification on frag start
* @TE_V1_NOTIF_HOST_FRAG_END:request/receive notification on frag end
* @TE_V1_NOTIF_INTERNAL_FRAG_START: internal FW use.
* @TE_V1_NOTIF_INTERNAL_FRAG_END: internal FW use.
*
* Supported Time event notifications configuration.
* A notification (both event and fragment) includes a status indicating weather
* the FW was able to schedule the event or not. For fragment start/end
* notification the status is always success. There is no start/end fragment
* notification for monolithic events.
*/
enum {
TE_V1_NOTIF_NONE = 0,
TE_V1_NOTIF_HOST_EVENT_START = BIT(0),
TE_V1_NOTIF_HOST_EVENT_END = BIT(1),
TE_V1_NOTIF_INTERNAL_EVENT_START = BIT(2),
TE_V1_NOTIF_INTERNAL_EVENT_END = BIT(3),
TE_V1_NOTIF_HOST_FRAG_START = BIT(4),
TE_V1_NOTIF_HOST_FRAG_END = BIT(5),
TE_V1_NOTIF_INTERNAL_FRAG_START = BIT(6),
TE_V1_NOTIF_INTERNAL_FRAG_END = BIT(7),
}; /* MAC_EVENT_ACTION_API_E_VER_2 */
/* Time event - defines for command API */
/*
* @TE_V2_FRAG_NONE: fragmentation of the time event is NOT allowed.
* @TE_V2_FRAG_SINGLE: fragmentation of the time event is allowed, but only
* the first fragment is scheduled.
* @TE_V2_FRAG_DUAL: fragmentation of the time event is allowed, but only
* the first 2 fragments are scheduled.
* @TE_V2_FRAG_ENDLESS: fragmentation of the time event is allowed, and any
* number of fragments are valid.
*
* Other than the constant defined above, specifying a fragmentation value 'x'
* means that the event can be fragmented but only the first 'x' will be
* scheduled.
*/
enum {
TE_V2_FRAG_NONE = 0,
TE_V2_FRAG_SINGLE = 1,
TE_V2_FRAG_DUAL = 2,
TE_V2_FRAG_MAX = 0xfe,
TE_V2_FRAG_ENDLESS = 0xff
};
/* Repeat the time event endlessly (until removed) */
#define TE_V2_REPEAT_ENDLESS 0xff
/* If a Time Event has bounded repetitions, this is the maximal value */
#define TE_V2_REPEAT_MAX 0xfe
#define TE_V2_PLACEMENT_POS 12
#define TE_V2_ABSENCE_POS 15
/* Time event policy values
* A notification (both event and fragment) includes a status indicating weather
* the FW was able to schedule the event or not. For fragment start/end
* notification the status is always success. There is no start/end fragment
* notification for monolithic events.
*
* @TE_V2_DEFAULT_POLICY: independent, social, present, unoticable
* @TE_V2_NOTIF_HOST_EVENT_START: request/receive notification on event start
* @TE_V2_NOTIF_HOST_EVENT_END:request/receive notification on event end
* @TE_V2_NOTIF_INTERNAL_EVENT_START: internal FW use
* @TE_V2_NOTIF_INTERNAL_EVENT_END: internal FW use.
* @TE_V2_NOTIF_HOST_FRAG_START: request/receive notification on frag start
* @TE_V2_NOTIF_HOST_FRAG_END:request/receive notification on frag end
* @TE_V2_NOTIF_INTERNAL_FRAG_START: internal FW use.
* @TE_V2_NOTIF_INTERNAL_FRAG_END: internal FW use.
* @TE_V2_DEP_OTHER: depends on another time event
* @TE_V2_DEP_TSF: depends on a specific time
* @TE_V2_EVENT_SOCIOPATHIC: can't co-exist with other events of tha same MAC
* @TE_V2_ABSENCE: are we present or absent during the Time Event.
*/
enum {
TE_V2_DEFAULT_POLICY = 0x0,
/* notifications (event start/stop, fragment start/stop) */
TE_V2_NOTIF_HOST_EVENT_START = BIT(0),
TE_V2_NOTIF_HOST_EVENT_END = BIT(1),
TE_V2_NOTIF_INTERNAL_EVENT_START = BIT(2),
TE_V2_NOTIF_INTERNAL_EVENT_END = BIT(3),
TE_V2_NOTIF_HOST_FRAG_START = BIT(4),
TE_V2_NOTIF_HOST_FRAG_END = BIT(5),
TE_V2_NOTIF_INTERNAL_FRAG_START = BIT(6),
TE_V2_NOTIF_INTERNAL_FRAG_END = BIT(7),
T2_V2_START_IMMEDIATELY = BIT(11),
TE_V2_NOTIF_MSK = 0xff,
/* placement characteristics */
TE_V2_DEP_OTHER = BIT(TE_V2_PLACEMENT_POS),
TE_V2_DEP_TSF = BIT(TE_V2_PLACEMENT_POS + 1),
TE_V2_EVENT_SOCIOPATHIC = BIT(TE_V2_PLACEMENT_POS + 2),
/* are we present or absent during the Time Event. */
TE_V2_ABSENCE = BIT(TE_V2_ABSENCE_POS),
};
/**
* struct iwl_time_event_cmd_api - configuring Time Events
* with struct MAC_TIME_EVENT_DATA_API_S_VER_2 (see also
* with version 1. determined by IWL_UCODE_TLV_FLAGS)
* ( TIME_EVENT_CMD = 0x29 )
* @id_and_color: ID and color of the relevant MAC
* @action: action to perform, one of FW_CTXT_ACTION_*
* @id: this field has two meanings, depending on the action:
* If the action is ADD, then it means the type of event to add.
* For all other actions it is the unique event ID assigned when the
* event was added by the FW.
* @apply_time: When to start the Time Event (in GP2)
* @max_delay: maximum delay to event's start (apply time), in TU
* @depends_on: the unique ID of the event we depend on (if any)
* @interval: interval between repetitions, in TU
* @duration: duration of event in TU
* @repeat: how many repetitions to do, can be TE_REPEAT_ENDLESS
* @max_frags: maximal number of fragments the Time Event can be divided to
* @policy: defines whether uCode shall notify the host or other uCode modules
* on event and/or fragment start and/or end
* using one of TE_INDEPENDENT, TE_DEP_OTHER, TE_DEP_TSF
* TE_EVENT_SOCIOPATHIC
* using TE_ABSENCE and using TE_NOTIF_*
*/
struct iwl_time_event_cmd {
/* COMMON_INDEX_HDR_API_S_VER_1 */
__le32 id_and_color;
__le32 action;
__le32 id;
/* MAC_TIME_EVENT_DATA_API_S_VER_2 */
__le32 apply_time;
__le32 max_delay;
__le32 depends_on;
__le32 interval;
__le32 duration;
u8 repeat;
u8 max_frags;
__le16 policy;
} __packed; /* MAC_TIME_EVENT_CMD_API_S_VER_2 */
/**
* struct iwl_time_event_resp - response structure to iwl_time_event_cmd
* @status: bit 0 indicates success, all others specify errors
* @id: the Time Event type
* @unique_id: the unique ID assigned (in ADD) or given (others) to the TE
* @id_and_color: ID and color of the relevant MAC
*/
struct iwl_time_event_resp {
__le32 status;
__le32 id;
__le32 unique_id;
__le32 id_and_color;
} __packed; /* MAC_TIME_EVENT_RSP_API_S_VER_1 */
/**
* struct iwl_time_event_notif - notifications of time event start/stop
* ( TIME_EVENT_NOTIFICATION = 0x2a )
* @timestamp: action timestamp in GP2
* @session_id: session's unique id
* @unique_id: unique id of the Time Event itself
* @id_and_color: ID and color of the relevant MAC
* @action: one of TE_NOTIF_START or TE_NOTIF_END
* @status: true if scheduled, false otherwise (not executed)
*/
struct iwl_time_event_notif {
__le32 timestamp;
__le32 session_id;
__le32 unique_id;
__le32 id_and_color;
__le32 action;
__le32 status;
} __packed; /* MAC_TIME_EVENT_NTFY_API_S_VER_1 */
/* Bindings and Time Quota */
/**
* struct iwl_binding_cmd - configuring bindings
* ( BINDING_CONTEXT_CMD = 0x2b )
* @id_and_color: ID and color of the relevant Binding
* @action: action to perform, one of FW_CTXT_ACTION_*
* @macs: array of MAC id and colors which belong to the binding
* @phy: PHY id and color which belongs to the binding
*/
struct iwl_binding_cmd {
/* COMMON_INDEX_HDR_API_S_VER_1 */
__le32 id_and_color;
__le32 action;
/* BINDING_DATA_API_S_VER_1 */
__le32 macs[MAX_MACS_IN_BINDING];
__le32 phy;
} __packed; /* BINDING_CMD_API_S_VER_1 */
/* The maximal number of fragments in the FW's schedule session */
#define IWL_MVM_MAX_QUOTA 128
/**
* struct iwl_time_quota_data - configuration of time quota per binding
* @id_and_color: ID and color of the relevant Binding
* @quota: absolute time quota in TU. The scheduler will try to divide the
* remainig quota (after Time Events) according to this quota.
* @max_duration: max uninterrupted context duration in TU
*/
struct iwl_time_quota_data {
__le32 id_and_color;
__le32 quota;
__le32 max_duration;
} __packed; /* TIME_QUOTA_DATA_API_S_VER_1 */
/**
* struct iwl_time_quota_cmd - configuration of time quota between bindings
* ( TIME_QUOTA_CMD = 0x2c )
* @quotas: allocations per binding
*/
struct iwl_time_quota_cmd {
struct iwl_time_quota_data quotas[MAX_BINDINGS];
} __packed; /* TIME_QUOTA_ALLOCATION_CMD_API_S_VER_1 */
/* PHY context */
/* Supported bands */
#define PHY_BAND_5 (0)
#define PHY_BAND_24 (1)
/* Supported channel width, vary if there is VHT support */
#define PHY_VHT_CHANNEL_MODE20 (0x0)
#define PHY_VHT_CHANNEL_MODE40 (0x1)
#define PHY_VHT_CHANNEL_MODE80 (0x2)
#define PHY_VHT_CHANNEL_MODE160 (0x3)
/*
* Control channel position:
* For legacy set bit means upper channel, otherwise lower.
* For VHT - bit-2 marks if the control is lower/upper relative to center-freq
* bits-1:0 mark the distance from the center freq. for 20Mhz, offset is 0.
* center_freq
* |
* 40Mhz |_______|_______|
* 80Mhz |_______|_______|_______|_______|
* 160Mhz |_______|_______|_______|_______|_______|_______|_______|_______|
* code 011 010 001 000 | 100 101 110 111
*/
#define PHY_VHT_CTRL_POS_1_BELOW (0x0)
#define PHY_VHT_CTRL_POS_2_BELOW (0x1)
#define PHY_VHT_CTRL_POS_3_BELOW (0x2)
#define PHY_VHT_CTRL_POS_4_BELOW (0x3)
#define PHY_VHT_CTRL_POS_1_ABOVE (0x4)
#define PHY_VHT_CTRL_POS_2_ABOVE (0x5)
#define PHY_VHT_CTRL_POS_3_ABOVE (0x6)
#define PHY_VHT_CTRL_POS_4_ABOVE (0x7)
/*
* @band: PHY_BAND_*
* @channel: channel number
* @width: PHY_[VHT|LEGACY]_CHANNEL_*
* @ctrl channel: PHY_[VHT|LEGACY]_CTRL_*
*/
struct iwl_fw_channel_info {
u8 band;
u8 channel;
u8 width;
u8 ctrl_pos;
} __packed;
#define PHY_RX_CHAIN_DRIVER_FORCE_POS (0)
#define PHY_RX_CHAIN_DRIVER_FORCE_MSK \
(0x1 << PHY_RX_CHAIN_DRIVER_FORCE_POS)
#define PHY_RX_CHAIN_VALID_POS (1)
#define PHY_RX_CHAIN_VALID_MSK \
(0x7 << PHY_RX_CHAIN_VALID_POS)
#define PHY_RX_CHAIN_FORCE_SEL_POS (4)
#define PHY_RX_CHAIN_FORCE_SEL_MSK \
(0x7 << PHY_RX_CHAIN_FORCE_SEL_POS)
#define PHY_RX_CHAIN_FORCE_MIMO_SEL_POS (7)
#define PHY_RX_CHAIN_FORCE_MIMO_SEL_MSK \
(0x7 << PHY_RX_CHAIN_FORCE_MIMO_SEL_POS)
#define PHY_RX_CHAIN_CNT_POS (10)
#define PHY_RX_CHAIN_CNT_MSK \
(0x3 << PHY_RX_CHAIN_CNT_POS)
#define PHY_RX_CHAIN_MIMO_CNT_POS (12)
#define PHY_RX_CHAIN_MIMO_CNT_MSK \
(0x3 << PHY_RX_CHAIN_MIMO_CNT_POS)
#define PHY_RX_CHAIN_MIMO_FORCE_POS (14)
#define PHY_RX_CHAIN_MIMO_FORCE_MSK \
(0x1 << PHY_RX_CHAIN_MIMO_FORCE_POS)
/* TODO: fix the value, make it depend on firmware at runtime? */
#define NUM_PHY_CTX 3
/* TODO: complete missing documentation */
/**
* struct iwl_phy_context_cmd - config of the PHY context
* ( PHY_CONTEXT_CMD = 0x8 )
* @id_and_color: ID and color of the relevant Binding
* @action: action to perform, one of FW_CTXT_ACTION_*
* @apply_time: 0 means immediate apply and context switch.
* other value means apply new params after X usecs
* @tx_param_color: ???
* @channel_info:
* @txchain_info: ???
* @rxchain_info: ???
* @acquisition_data: ???
* @dsp_cfg_flags: set to 0
*/
struct iwl_phy_context_cmd {
/* COMMON_INDEX_HDR_API_S_VER_1 */
__le32 id_and_color;
__le32 action;
/* PHY_CONTEXT_DATA_API_S_VER_1 */
__le32 apply_time;
__le32 tx_param_color;
struct iwl_fw_channel_info ci;
__le32 txchain_info;
__le32 rxchain_info;
__le32 acquisition_data;
__le32 dsp_cfg_flags;
} __packed; /* PHY_CONTEXT_CMD_API_VER_1 */
/*
* Aux ROC command
*
* Command requests the firmware to create a time event for a certain duration
* and remain on the given channel. This is done by using the Aux framework in
* the FW.
* The command was first used for Hot Spot issues - but can be used regardless
* to Hot Spot.
*
* ( HOT_SPOT_CMD 0x53 )
*
* @id_and_color: ID and color of the MAC
* @action: action to perform, one of FW_CTXT_ACTION_*
* @event_unique_id: If the action FW_CTXT_ACTION_REMOVE then the
* event_unique_id should be the id of the time event assigned by ucode.
* Otherwise ignore the event_unique_id.
* @sta_id_and_color: station id and color, resumed during "Remain On Channel"
* activity.
* @channel_info: channel info
* @node_addr: Our MAC Address
* @reserved: reserved for alignment
* @apply_time: GP2 value to start (should always be the current GP2 value)
* @apply_time_max_delay: Maximum apply time delay value in TU. Defines max
* time by which start of the event is allowed to be postponed.
* @duration: event duration in TU To calculate event duration:
* timeEventDuration = min(duration, remainingQuota)
*/
struct iwl_hs20_roc_req {
/* COMMON_INDEX_HDR_API_S_VER_1 hdr */
__le32 id_and_color;
__le32 action;
__le32 event_unique_id;
__le32 sta_id_and_color;
struct iwl_fw_channel_info channel_info;
u8 node_addr[ETH_ALEN];
__le16 reserved;
__le32 apply_time;
__le32 apply_time_max_delay;
__le32 duration;
} __packed; /* HOT_SPOT_CMD_API_S_VER_1 */
/*
* values for AUX ROC result values
*/
enum iwl_mvm_hot_spot {
HOT_SPOT_RSP_STATUS_OK,
HOT_SPOT_RSP_STATUS_TOO_MANY_EVENTS,
HOT_SPOT_MAX_NUM_OF_SESSIONS,
};
/*
* Aux ROC command response
*
* In response to iwl_hs20_roc_req the FW sends this command to notify the
* driver the uid of the timevent.
*
* ( HOT_SPOT_CMD 0x53 )
*
* @event_unique_id: Unique ID of time event assigned by ucode
* @status: Return status 0 is success, all the rest used for specific errors
*/
struct iwl_hs20_roc_res {
__le32 event_unique_id;
__le32 status;
} __packed; /* HOT_SPOT_RSP_API_S_VER_1 */
/**
* struct iwl_radio_version_notif - information on the radio version
* ( RADIO_VERSION_NOTIFICATION = 0x68 )
* @radio_flavor:
* @radio_step:
* @radio_dash:
*/
struct iwl_radio_version_notif {
__le32 radio_flavor;
__le32 radio_step;
__le32 radio_dash;
} __packed; /* RADIO_VERSION_NOTOFICATION_S_VER_1 */
enum iwl_card_state_flags {
CARD_ENABLED = 0x00,
HW_CARD_DISABLED = 0x01,
SW_CARD_DISABLED = 0x02,
CT_KILL_CARD_DISABLED = 0x04,
HALT_CARD_DISABLED = 0x08,
CARD_DISABLED_MSK = 0x0f,
CARD_IS_RX_ON = 0x10,
};
/**
* struct iwl_radio_version_notif - information on the radio version
* ( CARD_STATE_NOTIFICATION = 0xa1 )
* @flags: %iwl_card_state_flags
*/
struct iwl_card_state_notif {
__le32 flags;
} __packed; /* CARD_STATE_NTFY_API_S_VER_1 */
/**
* struct iwl_missed_beacons_notif - information on missed beacons
* ( MISSED_BEACONS_NOTIFICATION = 0xa2 )
* @mac_id: interface ID
* @consec_missed_beacons_since_last_rx: number of consecutive missed
* beacons since last RX.
* @consec_missed_beacons: number of consecutive missed beacons
* @num_expected_beacons:
* @num_recvd_beacons:
*/
struct iwl_missed_beacons_notif {
__le32 mac_id;
__le32 consec_missed_beacons_since_last_rx;
__le32 consec_missed_beacons;
__le32 num_expected_beacons;
__le32 num_recvd_beacons;
} __packed; /* MISSED_BEACON_NTFY_API_S_VER_3 */
/**
* struct iwl_mfuart_load_notif - mfuart image version & status
* ( MFUART_LOAD_NOTIFICATION = 0xb1 )
* @installed_ver: installed image version
* @external_ver: external image version
* @status: MFUART loading status
* @duration: MFUART loading time
*/
struct iwl_mfuart_load_notif {
__le32 installed_ver;
__le32 external_ver;
__le32 status;
__le32 duration;
} __packed; /*MFU_LOADER_NTFY_API_S_VER_1*/
/**
* struct iwl_set_calib_default_cmd - set default value for calibration.
* ( SET_CALIB_DEFAULT_CMD = 0x8e )
* @calib_index: the calibration to set value for
* @length: of data
* @data: the value to set for the calibration result
*/
struct iwl_set_calib_default_cmd {
__le16 calib_index;
__le16 length;
u8 data[0];
} __packed; /* PHY_CALIB_OVERRIDE_VALUES_S */
#define MAX_PORT_ID_NUM 2
#define MAX_MCAST_FILTERING_ADDRESSES 256
/**
* struct iwl_mcast_filter_cmd - configure multicast filter.
* @filter_own: Set 1 to filter out multicast packets sent by station itself
* @port_id: Multicast MAC addresses array specifier. This is a strange way
* to identify network interface adopted in host-device IF.
* It is used by FW as index in array of addresses. This array has
* MAX_PORT_ID_NUM members.
* @count: Number of MAC addresses in the array
* @pass_all: Set 1 to pass all multicast packets.
* @bssid: current association BSSID.
* @addr_list: Place holder for array of MAC addresses.
* IMPORTANT: add padding if necessary to ensure DWORD alignment.
*/
struct iwl_mcast_filter_cmd {
u8 filter_own;
u8 port_id;
u8 count;
u8 pass_all;
u8 bssid[6];
u8 reserved[2];
u8 addr_list[0];
} __packed; /* MCAST_FILTERING_CMD_API_S_VER_1 */
#define MAX_BCAST_FILTERS 8
#define MAX_BCAST_FILTER_ATTRS 2
/**
* enum iwl_mvm_bcast_filter_attr_offset - written by fw for each Rx packet
* @BCAST_FILTER_OFFSET_PAYLOAD_START: offset is from payload start.
* @BCAST_FILTER_OFFSET_IP_END: offset is from ip header end (i.e.
* start of ip payload).
*/
enum iwl_mvm_bcast_filter_attr_offset {
BCAST_FILTER_OFFSET_PAYLOAD_START = 0,
BCAST_FILTER_OFFSET_IP_END = 1,
};
/**
* struct iwl_fw_bcast_filter_attr - broadcast filter attribute
* @offset_type: &enum iwl_mvm_bcast_filter_attr_offset.
* @offset: starting offset of this pattern.
* @val: value to match - big endian (MSB is the first
* byte to match from offset pos).
* @mask: mask to match (big endian).
*/
struct iwl_fw_bcast_filter_attr {
u8 offset_type;
u8 offset;
__le16 reserved1;
__be32 val;
__be32 mask;
} __packed; /* BCAST_FILTER_ATT_S_VER_1 */
/**
* enum iwl_mvm_bcast_filter_frame_type - filter frame type
* @BCAST_FILTER_FRAME_TYPE_ALL: consider all frames.
* @BCAST_FILTER_FRAME_TYPE_IPV4: consider only ipv4 frames
*/
enum iwl_mvm_bcast_filter_frame_type {
BCAST_FILTER_FRAME_TYPE_ALL = 0,
BCAST_FILTER_FRAME_TYPE_IPV4 = 1,
};
/**
* struct iwl_fw_bcast_filter - broadcast filter
* @discard: discard frame (1) or let it pass (0).
* @frame_type: &enum iwl_mvm_bcast_filter_frame_type.
* @num_attrs: number of valid attributes in this filter.
* @attrs: attributes of this filter. a filter is considered matched
* only when all its attributes are matched (i.e. AND relationship)
*/
struct iwl_fw_bcast_filter {
u8 discard;
u8 frame_type;
u8 num_attrs;
u8 reserved1;
struct iwl_fw_bcast_filter_attr attrs[MAX_BCAST_FILTER_ATTRS];
} __packed; /* BCAST_FILTER_S_VER_1 */
#define BA_WINDOW_STREAMS_MAX 16
#define BA_WINDOW_STATUS_TID_MSK 0x000F
#define BA_WINDOW_STATUS_STA_ID_POS 4
#define BA_WINDOW_STATUS_STA_ID_MSK 0x01F0
#define BA_WINDOW_STATUS_VALID_MSK BIT(9)
/**
* struct iwl_ba_window_status_notif - reordering window's status notification
* @bitmap: bitmap of received frames [start_seq_num + 0]..[start_seq_num + 63]
* @ra_tid: bit 3:0 - TID, bit 8:4 - STA_ID, bit 9 - valid
* @start_seq_num: the start sequence number of the bitmap
* @mpdu_rx_count: the number of received MPDUs since entering D0i3
*/
struct iwl_ba_window_status_notif {
__le64 bitmap[BA_WINDOW_STREAMS_MAX];
__le16 ra_tid[BA_WINDOW_STREAMS_MAX];
__le32 start_seq_num[BA_WINDOW_STREAMS_MAX];
__le16 mpdu_rx_count[BA_WINDOW_STREAMS_MAX];
} __packed; /* BA_WINDOW_STATUS_NTFY_API_S_VER_1 */
/**
* struct iwl_fw_bcast_mac - per-mac broadcast filtering configuration.
* @default_discard: default action for this mac (discard (1) / pass (0)).
* @attached_filters: bitmap of relevant filters for this mac.
*/
struct iwl_fw_bcast_mac {
u8 default_discard;
u8 reserved1;
__le16 attached_filters;
} __packed; /* BCAST_MAC_CONTEXT_S_VER_1 */
/**
* struct iwl_bcast_filter_cmd - broadcast filtering configuration
* @disable: enable (0) / disable (1)
* @max_bcast_filters: max number of filters (MAX_BCAST_FILTERS)
* @max_macs: max number of macs (NUM_MAC_INDEX_DRIVER)
* @filters: broadcast filters
* @macs: broadcast filtering configuration per-mac
*/
struct iwl_bcast_filter_cmd {
u8 disable;
u8 max_bcast_filters;
u8 max_macs;
u8 reserved1;
struct iwl_fw_bcast_filter filters[MAX_BCAST_FILTERS];
struct iwl_fw_bcast_mac macs[NUM_MAC_INDEX_DRIVER];
} __packed; /* BCAST_FILTERING_HCMD_API_S_VER_1 */
/*
* enum iwl_mvm_marker_id - maker ids
*
* The ids for different type of markers to insert into the usniffer logs
*/
enum iwl_mvm_marker_id {
MARKER_ID_TX_FRAME_LATENCY = 1,
}; /* MARKER_ID_API_E_VER_1 */
/**
* struct iwl_mvm_marker - mark info into the usniffer logs
*
* (MARKER_CMD = 0xcb)
*
* Mark the UTC time stamp into the usniffer logs together with additional
* metadata, so the usniffer output can be parsed.
* In the command response the ucode will return the GP2 time.
*
* @dw_len: The amount of dwords following this byte including this byte.
* @marker_id: A unique marker id (iwl_mvm_marker_id).
* @reserved: reserved.
* @timestamp: in milliseconds since 1970-01-01 00:00:00 UTC
* @metadata: additional meta data that will be written to the unsiffer log
*/
struct iwl_mvm_marker {
u8 dwLen;
u8 markerId;
__le16 reserved;
__le64 timestamp;
__le32 metadata[0];
} __packed; /* MARKER_API_S_VER_1 */
/*
* enum iwl_dc2dc_config_id - flag ids
*
* Ids of dc2dc configuration flags
*/
enum iwl_dc2dc_config_id {
DCDC_LOW_POWER_MODE_MSK_SET = 0x1, /* not used */
DCDC_FREQ_TUNE_SET = 0x2,
}; /* MARKER_ID_API_E_VER_1 */
/**
* struct iwl_dc2dc_config_cmd - configure dc2dc values
*
* (DC2DC_CONFIG_CMD = 0x83)
*
* Set/Get & configure dc2dc values.
* The command always returns the current dc2dc values.
*
* @flags: set/get dc2dc
* @enable_low_power_mode: not used.
* @dc2dc_freq_tune0: frequency divider - digital domain
* @dc2dc_freq_tune1: frequency divider - analog domain
*/
struct iwl_dc2dc_config_cmd {
__le32 flags;
__le32 enable_low_power_mode; /* not used */
__le32 dc2dc_freq_tune0;
__le32 dc2dc_freq_tune1;
} __packed; /* DC2DC_CONFIG_CMD_API_S_VER_1 */
/**
* struct iwl_dc2dc_config_resp - response for iwl_dc2dc_config_cmd
*
* Current dc2dc values returned by the FW.
*
* @dc2dc_freq_tune0: frequency divider - digital domain
* @dc2dc_freq_tune1: frequency divider - analog domain
*/
struct iwl_dc2dc_config_resp {
__le32 dc2dc_freq_tune0;
__le32 dc2dc_freq_tune1;
} __packed; /* DC2DC_CONFIG_RESP_API_S_VER_1 */
/***********************************
* Smart Fifo API
***********************************/
/* Smart Fifo state */
enum iwl_sf_state {
SF_LONG_DELAY_ON = 0, /* should never be called by driver */
SF_FULL_ON,
SF_UNINIT,
SF_INIT_OFF,
SF_HW_NUM_STATES
};
/* Smart Fifo possible scenario */
enum iwl_sf_scenario {
SF_SCENARIO_SINGLE_UNICAST,
SF_SCENARIO_AGG_UNICAST,
SF_SCENARIO_MULTICAST,
SF_SCENARIO_BA_RESP,
SF_SCENARIO_TX_RESP,
SF_NUM_SCENARIO
};
#define SF_TRANSIENT_STATES_NUMBER 2 /* SF_LONG_DELAY_ON and SF_FULL_ON */
#define SF_NUM_TIMEOUT_TYPES 2 /* Aging timer and Idle timer */
/* smart FIFO default values */
#define SF_W_MARK_SISO 6144
#define SF_W_MARK_MIMO2 8192
#define SF_W_MARK_MIMO3 6144
#define SF_W_MARK_LEGACY 4096
#define SF_W_MARK_SCAN 4096
/* SF Scenarios timers for default configuration (aligned to 32 uSec) */
#define SF_SINGLE_UNICAST_IDLE_TIMER_DEF 160 /* 150 uSec */
#define SF_SINGLE_UNICAST_AGING_TIMER_DEF 400 /* 0.4 mSec */
#define SF_AGG_UNICAST_IDLE_TIMER_DEF 160 /* 150 uSec */
#define SF_AGG_UNICAST_AGING_TIMER_DEF 400 /* 0.4 mSec */
#define SF_MCAST_IDLE_TIMER_DEF 160 /* 150 mSec */
#define SF_MCAST_AGING_TIMER_DEF 400 /* 0.4 mSec */
#define SF_BA_IDLE_TIMER_DEF 160 /* 150 uSec */
#define SF_BA_AGING_TIMER_DEF 400 /* 0.4 mSec */
#define SF_TX_RE_IDLE_TIMER_DEF 160 /* 150 uSec */
#define SF_TX_RE_AGING_TIMER_DEF 400 /* 0.4 mSec */
/* SF Scenarios timers for BSS MAC configuration (aligned to 32 uSec) */
#define SF_SINGLE_UNICAST_IDLE_TIMER 320 /* 300 uSec */
#define SF_SINGLE_UNICAST_AGING_TIMER 2016 /* 2 mSec */
#define SF_AGG_UNICAST_IDLE_TIMER 320 /* 300 uSec */
#define SF_AGG_UNICAST_AGING_TIMER 2016 /* 2 mSec */
#define SF_MCAST_IDLE_TIMER 2016 /* 2 mSec */
#define SF_MCAST_AGING_TIMER 10016 /* 10 mSec */
#define SF_BA_IDLE_TIMER 320 /* 300 uSec */
#define SF_BA_AGING_TIMER 2016 /* 2 mSec */
#define SF_TX_RE_IDLE_TIMER 320 /* 300 uSec */
#define SF_TX_RE_AGING_TIMER 2016 /* 2 mSec */
#define SF_LONG_DELAY_AGING_TIMER 1000000 /* 1 Sec */
#define SF_CFG_DUMMY_NOTIF_OFF BIT(16)
/**
* Smart Fifo configuration command.
* @state: smart fifo state, types listed in enum %iwl_sf_sate.
* @watermark: Minimum allowed availabe free space in RXF for transient state.
* @long_delay_timeouts: aging and idle timer values for each scenario
* in long delay state.
* @full_on_timeouts: timer values for each scenario in full on state.
*/
struct iwl_sf_cfg_cmd {
__le32 state;
__le32 watermark[SF_TRANSIENT_STATES_NUMBER];
__le32 long_delay_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
__le32 full_on_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
} __packed; /* SF_CFG_API_S_VER_2 */
/***********************************
* Location Aware Regulatory (LAR) API - MCC updates
***********************************/
/**
* struct iwl_mcc_update_cmd_v1 - Request the device to update geographic
* regulatory profile according to the given MCC (Mobile Country Code).
* The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
* 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
* MCC in the cmd response will be the relevant MCC in the NVM.
* @mcc: given mobile country code
* @source_id: the source from where we got the MCC, see iwl_mcc_source
* @reserved: reserved for alignment
*/
struct iwl_mcc_update_cmd_v1 {
__le16 mcc;
u8 source_id;
u8 reserved;
} __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_1 */
/**
* struct iwl_mcc_update_cmd - Request the device to update geographic
* regulatory profile according to the given MCC (Mobile Country Code).
* The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
* 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
* MCC in the cmd response will be the relevant MCC in the NVM.
* @mcc: given mobile country code
* @source_id: the source from where we got the MCC, see iwl_mcc_source
* @reserved: reserved for alignment
* @key: integrity key for MCC API OEM testing
* @reserved2: reserved
*/
struct iwl_mcc_update_cmd {
__le16 mcc;
u8 source_id;
u8 reserved;
__le32 key;
__le32 reserved2[5];
} __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_2 */
/**
* iwl_mcc_update_resp_v1 - response to MCC_UPDATE_CMD.
* Contains the new channel control profile map, if changed, and the new MCC
* (mobile country code).
* The new MCC may be different than what was requested in MCC_UPDATE_CMD.
* @status: see &enum iwl_mcc_update_status
* @mcc: the new applied MCC
* @cap: capabilities for all channels which matches the MCC
* @source_id: the MCC source, see iwl_mcc_source
* @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51
* channels, depending on platform)
* @channels: channel control data map, DWORD for each channel. Only the first
* 16bits are used.
*/
struct iwl_mcc_update_resp_v1 {
__le32 status;
__le16 mcc;
u8 cap;
u8 source_id;
__le32 n_channels;
__le32 channels[0];
} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_1 */
/**
* iwl_mcc_update_resp - response to MCC_UPDATE_CMD.
* Contains the new channel control profile map, if changed, and the new MCC
* (mobile country code).
* The new MCC may be different than what was requested in MCC_UPDATE_CMD.
* @status: see &enum iwl_mcc_update_status
* @mcc: the new applied MCC
* @cap: capabilities for all channels which matches the MCC
* @source_id: the MCC source, see iwl_mcc_source
* @time: time elapsed from the MCC test start (in 30 seconds TU)
* @reserved: reserved.
* @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51
* channels, depending on platform)
* @channels: channel control data map, DWORD for each channel. Only the first
* 16bits are used.
*/
struct iwl_mcc_update_resp {
__le32 status;
__le16 mcc;
u8 cap;
u8 source_id;
__le16 time;
__le16 reserved;
__le32 n_channels;
__le32 channels[0];
} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_2 */
/**
* struct iwl_mcc_chub_notif - chub notifies of mcc change
* (MCC_CHUB_UPDATE_CMD = 0xc9)
* The Chub (Communication Hub, CommsHUB) is a HW component that connects to
* the cellular and connectivity cores that gets updates of the mcc, and
* notifies the ucode directly of any mcc change.
* The ucode requests the driver to request the device to update geographic
* regulatory profile according to the given MCC (Mobile Country Code).
* The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
* 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
* MCC in the cmd response will be the relevant MCC in the NVM.
* @mcc: given mobile country code
* @source_id: identity of the change originator, see iwl_mcc_source
* @reserved1: reserved for alignment
*/
struct iwl_mcc_chub_notif {
u16 mcc;
u8 source_id;
u8 reserved1;
} __packed; /* LAR_MCC_NOTIFY_S */
enum iwl_mcc_update_status {
MCC_RESP_NEW_CHAN_PROFILE,
MCC_RESP_SAME_CHAN_PROFILE,
MCC_RESP_INVALID,
MCC_RESP_NVM_DISABLED,
MCC_RESP_ILLEGAL,
MCC_RESP_LOW_PRIORITY,
MCC_RESP_TEST_MODE_ACTIVE,
MCC_RESP_TEST_MODE_NOT_ACTIVE,
MCC_RESP_TEST_MODE_DENIAL_OF_SERVICE,
};
enum iwl_mcc_source {
MCC_SOURCE_OLD_FW = 0,
MCC_SOURCE_ME = 1,
MCC_SOURCE_BIOS = 2,
MCC_SOURCE_3G_LTE_HOST = 3,
MCC_SOURCE_3G_LTE_DEVICE = 4,
MCC_SOURCE_WIFI = 5,
MCC_SOURCE_RESERVED = 6,
MCC_SOURCE_DEFAULT = 7,
MCC_SOURCE_UNINITIALIZED = 8,
MCC_SOURCE_MCC_API = 9,
MCC_SOURCE_GET_CURRENT = 0x10,
MCC_SOURCE_GETTING_MCC_TEST_MODE = 0x11,
};
/* DTS measurements */
enum iwl_dts_measurement_flags {
DTS_TRIGGER_CMD_FLAGS_TEMP = BIT(0),
DTS_TRIGGER_CMD_FLAGS_VOLT = BIT(1),
};
/**
* iwl_dts_measurement_cmd - request DTS temperature and/or voltage measurements
*
* @flags: indicates which measurements we want as specified in &enum
* iwl_dts_measurement_flags
*/
struct iwl_dts_measurement_cmd {
__le32 flags;
} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_CMD_S */
/**
* enum iwl_dts_control_measurement_mode - DTS measurement type
* @DTS_AUTOMATIC: Automatic mode (full SW control). Provide temperature read
* back (latest value. Not waiting for new value). Use automatic
* SW DTS configuration.
* @DTS_REQUEST_READ: Request DTS read. Configure DTS with manual settings,
* trigger DTS reading and provide read back temperature read
* when available.
* @DTS_OVER_WRITE: over-write the DTS temperatures in the SW until next read
* @DTS_DIRECT_WITHOUT_MEASURE: DTS returns its latest temperature result,
* without measurement trigger.
*/
enum iwl_dts_control_measurement_mode {
DTS_AUTOMATIC = 0,
DTS_REQUEST_READ = 1,
DTS_OVER_WRITE = 2,
DTS_DIRECT_WITHOUT_MEASURE = 3,
};
/**
* enum iwl_dts_used - DTS to use or used for measurement in the DTS request
* @DTS_USE_TOP: Top
* @DTS_USE_CHAIN_A: chain A
* @DTS_USE_CHAIN_B: chain B
* @DTS_USE_CHAIN_C: chain C
* @XTAL_TEMPERATURE - read temperature from xtal
*/
enum iwl_dts_used {
DTS_USE_TOP = 0,
DTS_USE_CHAIN_A = 1,
DTS_USE_CHAIN_B = 2,
DTS_USE_CHAIN_C = 3,
XTAL_TEMPERATURE = 4,
};
/**
* enum iwl_dts_bit_mode - bit-mode to use in DTS request read mode
* @DTS_BIT6_MODE: bit 6 mode
* @DTS_BIT8_MODE: bit 8 mode
*/
enum iwl_dts_bit_mode {
DTS_BIT6_MODE = 0,
DTS_BIT8_MODE = 1,
};
/**
* iwl_ext_dts_measurement_cmd - request extended DTS temperature measurements
* @control_mode: see &enum iwl_dts_control_measurement_mode
* @temperature: used when over write DTS mode is selected
* @sensor: set temperature sensor to use. See &enum iwl_dts_used
* @avg_factor: average factor to DTS in request DTS read mode
* @bit_mode: value defines the DTS bit mode to use. See &enum iwl_dts_bit_mode
* @step_duration: step duration for the DTS
*/
struct iwl_ext_dts_measurement_cmd {
__le32 control_mode;
__le32 temperature;
__le32 sensor;
__le32 avg_factor;
__le32 bit_mode;
__le32 step_duration;
} __packed; /* XVT_FW_DTS_CONTROL_MEASUREMENT_REQUEST_API_S */
/**
* struct iwl_dts_measurement_notif_v1 - measurements notification
*
* @temp: the measured temperature
* @voltage: the measured voltage
*/
struct iwl_dts_measurement_notif_v1 {
__le32 temp;
__le32 voltage;
} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_1*/
/**
* struct iwl_dts_measurement_notif_v2 - measurements notification
*
* @temp: the measured temperature
* @voltage: the measured voltage
* @threshold_idx: the trip index that was crossed
*/
struct iwl_dts_measurement_notif_v2 {
__le32 temp;
__le32 voltage;
__le32 threshold_idx;
} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_2 */
/**
* struct ct_kill_notif - CT-kill entry notification
*
* @temperature: the current temperature in celsius
* @reserved: reserved
*/
struct ct_kill_notif {
__le16 temperature;
__le16 reserved;
} __packed; /* GRP_PHY_CT_KILL_NTF */
/**
* enum ctdp_cmd_operation - CTDP command operations
* @CTDP_CMD_OPERATION_START: update the current budget
* @CTDP_CMD_OPERATION_STOP: stop ctdp
* @CTDP_CMD_OPERATION_REPORT: get the avgerage budget
*/
enum iwl_mvm_ctdp_cmd_operation {
CTDP_CMD_OPERATION_START = 0x1,
CTDP_CMD_OPERATION_STOP = 0x2,
CTDP_CMD_OPERATION_REPORT = 0x4,
};/* CTDP_CMD_OPERATION_TYPE_E */
/**
* struct iwl_mvm_ctdp_cmd - track and manage the FW power consumption budget
*
* @operation: see &enum iwl_mvm_ctdp_cmd_operation
* @budget: the budget in milliwatt
* @window_size: defined in API but not used
*/
struct iwl_mvm_ctdp_cmd {
__le32 operation;
__le32 budget;
__le32 window_size;
} __packed;
#define IWL_MAX_DTS_TRIPS 8
/**
* struct iwl_temp_report_ths_cmd - set temperature thresholds
*
* @num_temps: number of temperature thresholds passed
* @thresholds: array with the thresholds to be configured
*/
struct temp_report_ths_cmd {
__le32 num_temps;
__le16 thresholds[IWL_MAX_DTS_TRIPS];
} __packed; /* GRP_PHY_TEMP_REPORTING_THRESHOLDS_CMD */
/***********************************
* TDLS API
***********************************/
/* Type of TDLS request */
enum iwl_tdls_channel_switch_type {
TDLS_SEND_CHAN_SW_REQ = 0,
TDLS_SEND_CHAN_SW_RESP_AND_MOVE_CH,
TDLS_MOVE_CH,
}; /* TDLS_STA_CHANNEL_SWITCH_CMD_TYPE_API_E_VER_1 */
/**
* Switch timing sub-element in a TDLS channel-switch command
* @frame_timestamp: GP2 timestamp of channel-switch request/response packet
* received from peer
* @max_offchan_duration: What amount of microseconds out of a DTIM is given
* to the TDLS off-channel communication. For instance if the DTIM is
* 200TU and the TDLS peer is to be given 25% of the time, the value
* given will be 50TU, or 50 * 1024 if translated into microseconds.
* @switch_time: switch time the peer sent in its channel switch timing IE
* @switch_timout: switch timeout the peer sent in its channel switch timing IE
*/
struct iwl_tdls_channel_switch_timing {
__le32 frame_timestamp; /* GP2 time of peer packet Rx */
__le32 max_offchan_duration; /* given in micro-seconds */
__le32 switch_time; /* given in micro-seconds */
__le32 switch_timeout; /* given in micro-seconds */
} __packed; /* TDLS_STA_CHANNEL_SWITCH_TIMING_DATA_API_S_VER_1 */
#define IWL_TDLS_CH_SW_FRAME_MAX_SIZE 200
/**
* TDLS channel switch frame template
*
* A template representing a TDLS channel-switch request or response frame
*
* @switch_time_offset: offset to the channel switch timing IE in the template
* @tx_cmd: Tx parameters for the frame
* @data: frame data
*/
struct iwl_tdls_channel_switch_frame {
__le32 switch_time_offset;
struct iwl_tx_cmd tx_cmd;
u8 data[IWL_TDLS_CH_SW_FRAME_MAX_SIZE];
} __packed; /* TDLS_STA_CHANNEL_SWITCH_FRAME_API_S_VER_1 */
/**
* TDLS channel switch command
*
* The command is sent to initiate a channel switch and also in response to
* incoming TDLS channel-switch request/response packets from remote peers.
*
* @switch_type: see &enum iwl_tdls_channel_switch_type
* @peer_sta_id: station id of TDLS peer
* @ci: channel we switch to
* @timing: timing related data for command
* @frame: channel-switch request/response template, depending to switch_type
*/
struct iwl_tdls_channel_switch_cmd {
u8 switch_type;
__le32 peer_sta_id;
struct iwl_fw_channel_info ci;
struct iwl_tdls_channel_switch_timing timing;
struct iwl_tdls_channel_switch_frame frame;
} __packed; /* TDLS_STA_CHANNEL_SWITCH_CMD_API_S_VER_1 */
/**
* TDLS channel switch start notification
*
* @status: non-zero on success
* @offchannel_duration: duration given in microseconds
* @sta_id: peer currently performing the channel-switch with
*/
struct iwl_tdls_channel_switch_notif {
__le32 status;
__le32 offchannel_duration;
__le32 sta_id;
} __packed; /* TDLS_STA_CHANNEL_SWITCH_NTFY_API_S_VER_1 */
/**
* TDLS station info
*
* @sta_id: station id of the TDLS peer
* @tx_to_peer_tid: TID reserved vs. the peer for FW based Tx
* @tx_to_peer_ssn: initial SSN the FW should use for Tx on its TID vs the peer
* @is_initiator: 1 if the peer is the TDLS link initiator, 0 otherwise
*/
struct iwl_tdls_sta_info {
u8 sta_id;
u8 tx_to_peer_tid;
__le16 tx_to_peer_ssn;
__le32 is_initiator;
} __packed; /* TDLS_STA_INFO_VER_1 */
/**
* TDLS basic config command
*
* @id_and_color: MAC id and color being configured
* @tdls_peer_count: amount of currently connected TDLS peers
* @tx_to_ap_tid: TID reverved vs. the AP for FW based Tx
* @tx_to_ap_ssn: initial SSN the FW should use for Tx on its TID vs. the AP
* @sta_info: per-station info. Only the first tdls_peer_count entries are set
* @pti_req_data_offset: offset of network-level data for the PTI template
* @pti_req_tx_cmd: Tx parameters for PTI request template
* @pti_req_template: PTI request template data
*/
struct iwl_tdls_config_cmd {
__le32 id_and_color; /* mac id and color */
u8 tdls_peer_count;
u8 tx_to_ap_tid;
__le16 tx_to_ap_ssn;
struct iwl_tdls_sta_info sta_info[IWL_MVM_TDLS_STA_COUNT];
__le32 pti_req_data_offset;
struct iwl_tx_cmd pti_req_tx_cmd;
u8 pti_req_template[0];
} __packed; /* TDLS_CONFIG_CMD_API_S_VER_1 */
/**
* TDLS per-station config information from FW
*
* @sta_id: station id of the TDLS peer
* @tx_to_peer_last_seq: last sequence number used by FW during FW-based Tx to
* the peer
*/
struct iwl_tdls_config_sta_info_res {
__le16 sta_id;
__le16 tx_to_peer_last_seq;
} __packed; /* TDLS_STA_INFO_RSP_VER_1 */
/**
* TDLS config information from FW
*
* @tx_to_ap_last_seq: last sequence number used by FW during FW-based Tx to AP
* @sta_info: per-station TDLS config information
*/
struct iwl_tdls_config_res {
__le32 tx_to_ap_last_seq;
struct iwl_tdls_config_sta_info_res sta_info[IWL_MVM_TDLS_STA_COUNT];
} __packed; /* TDLS_CONFIG_RSP_API_S_VER_1 */
#define TX_FIFO_MAX_NUM 8
#define RX_FIFO_MAX_NUM 2
#define TX_FIFO_INTERNAL_MAX_NUM 6
/**
* Shared memory configuration information from the FW
*
* @shared_mem_addr: shared memory addr (pre 8000 HW set to 0x0 as MARBH is not
* accessible)
* @shared_mem_size: shared memory size
* @sample_buff_addr: internal sample (mon/adc) buff addr (pre 8000 HW set to
* 0x0 as accessible only via DBGM RDAT)
* @sample_buff_size: internal sample buff size
* @txfifo_addr: start addr of TXF0 (excluding the context table 0.5KB), (pre
* 8000 HW set to 0x0 as not accessible)
* @txfifo_size: size of TXF0 ... TXF7
* @rxfifo_size: RXF1, RXF2 sizes. If there is no RXF2, it'll have a value of 0
* @page_buff_addr: used by UMAC and performance debug (page miss analysis),
* when paging is not supported this should be 0
* @page_buff_size: size of %page_buff_addr
* @rxfifo_addr: Start address of rxFifo
* @internal_txfifo_addr: start address of internalFifo
* @internal_txfifo_size: internal fifos' size
*
* NOTE: on firmware that don't have IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG
* set, the last 3 members don't exist.
*/
struct iwl_shared_mem_cfg {
__le32 shared_mem_addr;
__le32 shared_mem_size;
__le32 sample_buff_addr;
__le32 sample_buff_size;
__le32 txfifo_addr;
__le32 txfifo_size[TX_FIFO_MAX_NUM];
__le32 rxfifo_size[RX_FIFO_MAX_NUM];
__le32 page_buff_addr;
__le32 page_buff_size;
__le32 rxfifo_addr;
__le32 internal_txfifo_addr;
__le32 internal_txfifo_size[TX_FIFO_INTERNAL_MAX_NUM];
} __packed; /* SHARED_MEM_ALLOC_API_S_VER_2 */
/**
* VHT MU-MIMO group configuration
*
* @membership_status: a bitmap of MU groups
* @user_position:the position of station in a group. If the station is in the
* group then bits (group * 2) is the position -1
*/
struct iwl_mu_group_mgmt_cmd {
__le32 reserved;
__le32 membership_status[2];
__le32 user_position[4];
} __packed; /* MU_GROUP_ID_MNG_TABLE_API_S_VER_1 */
/**
* struct iwl_mu_group_mgmt_notif - VHT MU-MIMO group id notification
*
* @membership_status: a bitmap of MU groups
* @user_position: the position of station in a group. If the station is in the
* group then bits (group * 2) is the position -1
*/
struct iwl_mu_group_mgmt_notif {
__le32 membership_status[2];
__le32 user_position[4];
} __packed; /* MU_GROUP_MNG_NTFY_API_S_VER_1 */
#define MAX_STORED_BEACON_SIZE 600
/**
* Stored beacon notification
*
* @system_time: system time on air rise
* @tsf: TSF on air rise
* @beacon_timestamp: beacon on air rise
* @phy_flags: general phy flags: band, modulation, etc.
* @channel: channel this beacon was received on
* @rates: rate in ucode internal format
* @byte_count: frame's byte count
*/
struct iwl_stored_beacon_notif {
__le32 system_time;
__le64 tsf;
__le32 beacon_timestamp;
__le16 phy_flags;
__le16 channel;
__le32 rates;
__le32 byte_count;
u8 data[MAX_STORED_BEACON_SIZE];
} __packed; /* WOWLAN_STROED_BEACON_INFO_S_VER_1 */
#define LQM_NUMBER_OF_STATIONS_IN_REPORT 16
enum iwl_lqm_cmd_operatrions {
LQM_CMD_OPERATION_START_MEASUREMENT = 0x01,
LQM_CMD_OPERATION_STOP_MEASUREMENT = 0x02,
};
enum iwl_lqm_status {
LQM_STATUS_SUCCESS = 0,
LQM_STATUS_TIMEOUT = 1,
LQM_STATUS_ABORT = 2,
};
/**
* Link Quality Measurement command
* @cmd_operatrion: command operation to be performed (start or stop)
* as defined above.
* @mac_id: MAC ID the measurement applies to.
* @measurement_time: time of the total measurement to be performed, in uSec.
* @timeout: maximum time allowed until a response is sent, in uSec.
*/
struct iwl_link_qual_msrmnt_cmd {
__le32 cmd_operation;
__le32 mac_id;
__le32 measurement_time;
__le32 timeout;
} __packed /* LQM_CMD_API_S_VER_1 */;
/**
* Link Quality Measurement notification
*
* @frequent_stations_air_time: an array containing the total air time
* (in uSec) used by the most frequently transmitting stations.
* @number_of_stations: the number of uniqe stations included in the array
* (a number between 0 to 16)
* @total_air_time_other_stations: the total air time (uSec) used by all the
* stations which are not included in the above report.
* @time_in_measurement_window: the total time in uSec in which a measurement
* took place.
* @tx_frame_dropped: the number of TX frames dropped due to retry limit during
* measurement
* @mac_id: MAC ID the measurement applies to.
* @status: return status. may be one of the LQM_STATUS_* defined above.
* @reserved: reserved.
*/
struct iwl_link_qual_msrmnt_notif {
__le32 frequent_stations_air_time[LQM_NUMBER_OF_STATIONS_IN_REPORT];
__le32 number_of_stations;
__le32 total_air_time_other_stations;
__le32 time_in_measurement_window;
__le32 tx_frame_dropped;
__le32 mac_id;
__le32 status;
__le32 reserved[3];
} __packed; /* LQM_MEASUREMENT_COMPLETE_NTF_API_S_VER1 */
#endif /* __fw_api_h__ */