| /* |
| * Copyright (C) 2013 Fusion IO. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public |
| * License v2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public |
| * License along with this program; if not, write to the |
| * Free Software Foundation, Inc., 59 Temple Place - Suite 330, |
| * Boston, MA 021110-1307, USA. |
| */ |
| |
| #include <linux/slab.h> |
| #include "btrfs-tests.h" |
| #include "../ctree.h" |
| #include "../disk-io.h" |
| #include "../free-space-cache.h" |
| |
| #define BITS_PER_BITMAP (PAGE_SIZE * 8UL) |
| |
| /* |
| * This test just does basic sanity checking, making sure we can add an extent |
| * entry and remove space from either end and the middle, and make sure we can |
| * remove space that covers adjacent extent entries. |
| */ |
| static int test_extents(struct btrfs_block_group_cache *cache) |
| { |
| int ret = 0; |
| |
| test_msg("Running extent only tests\n"); |
| |
| /* First just make sure we can remove an entire entry */ |
| ret = btrfs_add_free_space(cache, 0, SZ_4M); |
| if (ret) { |
| test_msg("Error adding initial extents %d\n", ret); |
| return ret; |
| } |
| |
| ret = btrfs_remove_free_space(cache, 0, SZ_4M); |
| if (ret) { |
| test_msg("Error removing extent %d\n", ret); |
| return ret; |
| } |
| |
| if (test_check_exists(cache, 0, SZ_4M)) { |
| test_msg("Full remove left some lingering space\n"); |
| return -1; |
| } |
| |
| /* Ok edge and middle cases now */ |
| ret = btrfs_add_free_space(cache, 0, SZ_4M); |
| if (ret) { |
| test_msg("Error adding half extent %d\n", ret); |
| return ret; |
| } |
| |
| ret = btrfs_remove_free_space(cache, 3 * SZ_1M, SZ_1M); |
| if (ret) { |
| test_msg("Error removing tail end %d\n", ret); |
| return ret; |
| } |
| |
| ret = btrfs_remove_free_space(cache, 0, SZ_1M); |
| if (ret) { |
| test_msg("Error removing front end %d\n", ret); |
| return ret; |
| } |
| |
| ret = btrfs_remove_free_space(cache, SZ_2M, 4096); |
| if (ret) { |
| test_msg("Error removing middle piece %d\n", ret); |
| return ret; |
| } |
| |
| if (test_check_exists(cache, 0, SZ_1M)) { |
| test_msg("Still have space at the front\n"); |
| return -1; |
| } |
| |
| if (test_check_exists(cache, SZ_2M, 4096)) { |
| test_msg("Still have space in the middle\n"); |
| return -1; |
| } |
| |
| if (test_check_exists(cache, 3 * SZ_1M, SZ_1M)) { |
| test_msg("Still have space at the end\n"); |
| return -1; |
| } |
| |
| /* Cleanup */ |
| __btrfs_remove_free_space_cache(cache->free_space_ctl); |
| |
| return 0; |
| } |
| |
| static int test_bitmaps(struct btrfs_block_group_cache *cache, |
| u32 sectorsize) |
| { |
| u64 next_bitmap_offset; |
| int ret; |
| |
| test_msg("Running bitmap only tests\n"); |
| |
| ret = test_add_free_space_entry(cache, 0, SZ_4M, 1); |
| if (ret) { |
| test_msg("Couldn't create a bitmap entry %d\n", ret); |
| return ret; |
| } |
| |
| ret = btrfs_remove_free_space(cache, 0, SZ_4M); |
| if (ret) { |
| test_msg("Error removing bitmap full range %d\n", ret); |
| return ret; |
| } |
| |
| if (test_check_exists(cache, 0, SZ_4M)) { |
| test_msg("Left some space in bitmap\n"); |
| return -1; |
| } |
| |
| ret = test_add_free_space_entry(cache, 0, SZ_4M, 1); |
| if (ret) { |
| test_msg("Couldn't add to our bitmap entry %d\n", ret); |
| return ret; |
| } |
| |
| ret = btrfs_remove_free_space(cache, SZ_1M, SZ_2M); |
| if (ret) { |
| test_msg("Couldn't remove middle chunk %d\n", ret); |
| return ret; |
| } |
| |
| /* |
| * The first bitmap we have starts at offset 0 so the next one is just |
| * at the end of the first bitmap. |
| */ |
| next_bitmap_offset = (u64)(BITS_PER_BITMAP * sectorsize); |
| |
| /* Test a bit straddling two bitmaps */ |
| ret = test_add_free_space_entry(cache, next_bitmap_offset - SZ_2M, |
| SZ_4M, 1); |
| if (ret) { |
| test_msg("Couldn't add space that straddles two bitmaps %d\n", |
| ret); |
| return ret; |
| } |
| |
| ret = btrfs_remove_free_space(cache, next_bitmap_offset - SZ_1M, SZ_2M); |
| if (ret) { |
| test_msg("Couldn't remove overlapping space %d\n", ret); |
| return ret; |
| } |
| |
| if (test_check_exists(cache, next_bitmap_offset - SZ_1M, SZ_2M)) { |
| test_msg("Left some space when removing overlapping\n"); |
| return -1; |
| } |
| |
| __btrfs_remove_free_space_cache(cache->free_space_ctl); |
| |
| return 0; |
| } |
| |
| /* This is the high grade jackassery */ |
| static int test_bitmaps_and_extents(struct btrfs_block_group_cache *cache, |
| u32 sectorsize) |
| { |
| u64 bitmap_offset = (u64)(BITS_PER_BITMAP * sectorsize); |
| int ret; |
| |
| test_msg("Running bitmap and extent tests\n"); |
| |
| /* |
| * First let's do something simple, an extent at the same offset as the |
| * bitmap, but the free space completely in the extent and then |
| * completely in the bitmap. |
| */ |
| ret = test_add_free_space_entry(cache, SZ_4M, SZ_1M, 1); |
| if (ret) { |
| test_msg("Couldn't create bitmap entry %d\n", ret); |
| return ret; |
| } |
| |
| ret = test_add_free_space_entry(cache, 0, SZ_1M, 0); |
| if (ret) { |
| test_msg("Couldn't add extent entry %d\n", ret); |
| return ret; |
| } |
| |
| ret = btrfs_remove_free_space(cache, 0, SZ_1M); |
| if (ret) { |
| test_msg("Couldn't remove extent entry %d\n", ret); |
| return ret; |
| } |
| |
| if (test_check_exists(cache, 0, SZ_1M)) { |
| test_msg("Left remnants after our remove\n"); |
| return -1; |
| } |
| |
| /* Now to add back the extent entry and remove from the bitmap */ |
| ret = test_add_free_space_entry(cache, 0, SZ_1M, 0); |
| if (ret) { |
| test_msg("Couldn't re-add extent entry %d\n", ret); |
| return ret; |
| } |
| |
| ret = btrfs_remove_free_space(cache, SZ_4M, SZ_1M); |
| if (ret) { |
| test_msg("Couldn't remove from bitmap %d\n", ret); |
| return ret; |
| } |
| |
| if (test_check_exists(cache, SZ_4M, SZ_1M)) { |
| test_msg("Left remnants in the bitmap\n"); |
| return -1; |
| } |
| |
| /* |
| * Ok so a little more evil, extent entry and bitmap at the same offset, |
| * removing an overlapping chunk. |
| */ |
| ret = test_add_free_space_entry(cache, SZ_1M, SZ_4M, 1); |
| if (ret) { |
| test_msg("Couldn't add to a bitmap %d\n", ret); |
| return ret; |
| } |
| |
| ret = btrfs_remove_free_space(cache, SZ_512K, 3 * SZ_1M); |
| if (ret) { |
| test_msg("Couldn't remove overlapping space %d\n", ret); |
| return ret; |
| } |
| |
| if (test_check_exists(cache, SZ_512K, 3 * SZ_1M)) { |
| test_msg("Left over pieces after removing overlapping\n"); |
| return -1; |
| } |
| |
| __btrfs_remove_free_space_cache(cache->free_space_ctl); |
| |
| /* Now with the extent entry offset into the bitmap */ |
| ret = test_add_free_space_entry(cache, SZ_4M, SZ_4M, 1); |
| if (ret) { |
| test_msg("Couldn't add space to the bitmap %d\n", ret); |
| return ret; |
| } |
| |
| ret = test_add_free_space_entry(cache, SZ_2M, SZ_2M, 0); |
| if (ret) { |
| test_msg("Couldn't add extent to the cache %d\n", ret); |
| return ret; |
| } |
| |
| ret = btrfs_remove_free_space(cache, 3 * SZ_1M, SZ_4M); |
| if (ret) { |
| test_msg("Problem removing overlapping space %d\n", ret); |
| return ret; |
| } |
| |
| if (test_check_exists(cache, 3 * SZ_1M, SZ_4M)) { |
| test_msg("Left something behind when removing space"); |
| return -1; |
| } |
| |
| /* |
| * This has blown up in the past, the extent entry starts before the |
| * bitmap entry, but we're trying to remove an offset that falls |
| * completely within the bitmap range and is in both the extent entry |
| * and the bitmap entry, looks like this |
| * |
| * [ extent ] |
| * [ bitmap ] |
| * [ del ] |
| */ |
| __btrfs_remove_free_space_cache(cache->free_space_ctl); |
| ret = test_add_free_space_entry(cache, bitmap_offset + SZ_4M, SZ_4M, 1); |
| if (ret) { |
| test_msg("Couldn't add bitmap %d\n", ret); |
| return ret; |
| } |
| |
| ret = test_add_free_space_entry(cache, bitmap_offset - SZ_1M, |
| 5 * SZ_1M, 0); |
| if (ret) { |
| test_msg("Couldn't add extent entry %d\n", ret); |
| return ret; |
| } |
| |
| ret = btrfs_remove_free_space(cache, bitmap_offset + SZ_1M, 5 * SZ_1M); |
| if (ret) { |
| test_msg("Failed to free our space %d\n", ret); |
| return ret; |
| } |
| |
| if (test_check_exists(cache, bitmap_offset + SZ_1M, 5 * SZ_1M)) { |
| test_msg("Left stuff over\n"); |
| return -1; |
| } |
| |
| __btrfs_remove_free_space_cache(cache->free_space_ctl); |
| |
| /* |
| * This blew up before, we have part of the free space in a bitmap and |
| * then the entirety of the rest of the space in an extent. This used |
| * to return -EAGAIN back from btrfs_remove_extent, make sure this |
| * doesn't happen. |
| */ |
| ret = test_add_free_space_entry(cache, SZ_1M, SZ_2M, 1); |
| if (ret) { |
| test_msg("Couldn't add bitmap entry %d\n", ret); |
| return ret; |
| } |
| |
| ret = test_add_free_space_entry(cache, 3 * SZ_1M, SZ_1M, 0); |
| if (ret) { |
| test_msg("Couldn't add extent entry %d\n", ret); |
| return ret; |
| } |
| |
| ret = btrfs_remove_free_space(cache, SZ_1M, 3 * SZ_1M); |
| if (ret) { |
| test_msg("Error removing bitmap and extent overlapping %d\n", ret); |
| return ret; |
| } |
| |
| __btrfs_remove_free_space_cache(cache->free_space_ctl); |
| return 0; |
| } |
| |
| /* Used by test_steal_space_from_bitmap_to_extent(). */ |
| static bool test_use_bitmap(struct btrfs_free_space_ctl *ctl, |
| struct btrfs_free_space *info) |
| { |
| return ctl->free_extents > 0; |
| } |
| |
| /* Used by test_steal_space_from_bitmap_to_extent(). */ |
| static int |
| check_num_extents_and_bitmaps(const struct btrfs_block_group_cache *cache, |
| const int num_extents, |
| const int num_bitmaps) |
| { |
| if (cache->free_space_ctl->free_extents != num_extents) { |
| test_msg("Incorrect # of extent entries in the cache: %d, expected %d\n", |
| cache->free_space_ctl->free_extents, num_extents); |
| return -EINVAL; |
| } |
| if (cache->free_space_ctl->total_bitmaps != num_bitmaps) { |
| test_msg("Incorrect # of extent entries in the cache: %d, expected %d\n", |
| cache->free_space_ctl->total_bitmaps, num_bitmaps); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| /* Used by test_steal_space_from_bitmap_to_extent(). */ |
| static int check_cache_empty(struct btrfs_block_group_cache *cache) |
| { |
| u64 offset; |
| u64 max_extent_size; |
| |
| /* |
| * Now lets confirm that there's absolutely no free space left to |
| * allocate. |
| */ |
| if (cache->free_space_ctl->free_space != 0) { |
| test_msg("Cache free space is not 0\n"); |
| return -EINVAL; |
| } |
| |
| /* And any allocation request, no matter how small, should fail now. */ |
| offset = btrfs_find_space_for_alloc(cache, 0, 4096, 0, |
| &max_extent_size); |
| if (offset != 0) { |
| test_msg("Space allocation did not fail, returned offset: %llu", |
| offset); |
| return -EINVAL; |
| } |
| |
| /* And no extent nor bitmap entries in the cache anymore. */ |
| return check_num_extents_and_bitmaps(cache, 0, 0); |
| } |
| |
| /* |
| * Before we were able to steal free space from a bitmap entry to an extent |
| * entry, we could end up with 2 entries representing a contiguous free space. |
| * One would be an extent entry and the other a bitmap entry. Since in order |
| * to allocate space to a caller we use only 1 entry, we couldn't return that |
| * whole range to the caller if it was requested. This forced the caller to |
| * either assume ENOSPC or perform several smaller space allocations, which |
| * wasn't optimal as they could be spread all over the block group while under |
| * concurrency (extra overhead and fragmentation). |
| * |
| * This stealing approach is beneficial, since we always prefer to allocate |
| * from extent entries, both for clustered and non-clustered allocation |
| * requests. |
| */ |
| static int |
| test_steal_space_from_bitmap_to_extent(struct btrfs_block_group_cache *cache, |
| u32 sectorsize) |
| { |
| int ret; |
| u64 offset; |
| u64 max_extent_size; |
| const struct btrfs_free_space_op test_free_space_ops = { |
| .recalc_thresholds = cache->free_space_ctl->op->recalc_thresholds, |
| .use_bitmap = test_use_bitmap, |
| }; |
| const struct btrfs_free_space_op *orig_free_space_ops; |
| |
| test_msg("Running space stealing from bitmap to extent\n"); |
| |
| /* |
| * For this test, we want to ensure we end up with an extent entry |
| * immediately adjacent to a bitmap entry, where the bitmap starts |
| * at an offset where the extent entry ends. We keep adding and |
| * removing free space to reach into this state, but to get there |
| * we need to reach a point where marking new free space doesn't |
| * result in adding new extent entries or merging the new space |
| * with existing extent entries - the space ends up being marked |
| * in an existing bitmap that covers the new free space range. |
| * |
| * To get there, we need to reach the threshold defined set at |
| * cache->free_space_ctl->extents_thresh, which currently is |
| * 256 extents on a x86_64 system at least, and a few other |
| * conditions (check free_space_cache.c). Instead of making the |
| * test much longer and complicated, use a "use_bitmap" operation |
| * that forces use of bitmaps as soon as we have at least 1 |
| * extent entry. |
| */ |
| orig_free_space_ops = cache->free_space_ctl->op; |
| cache->free_space_ctl->op = &test_free_space_ops; |
| |
| /* |
| * Extent entry covering free space range [128Mb - 256Kb, 128Mb - 128Kb[ |
| */ |
| ret = test_add_free_space_entry(cache, SZ_128M - SZ_256K, SZ_128K, 0); |
| if (ret) { |
| test_msg("Couldn't add extent entry %d\n", ret); |
| return ret; |
| } |
| |
| /* Bitmap entry covering free space range [128Mb + 512Kb, 256Mb[ */ |
| ret = test_add_free_space_entry(cache, SZ_128M + SZ_512K, |
| SZ_128M - SZ_512K, 1); |
| if (ret) { |
| test_msg("Couldn't add bitmap entry %d\n", ret); |
| return ret; |
| } |
| |
| ret = check_num_extents_and_bitmaps(cache, 2, 1); |
| if (ret) |
| return ret; |
| |
| /* |
| * Now make only the first 256Kb of the bitmap marked as free, so that |
| * we end up with only the following ranges marked as free space: |
| * |
| * [128Mb - 256Kb, 128Mb - 128Kb[ |
| * [128Mb + 512Kb, 128Mb + 768Kb[ |
| */ |
| ret = btrfs_remove_free_space(cache, |
| SZ_128M + 768 * SZ_1K, |
| SZ_128M - 768 * SZ_1K); |
| if (ret) { |
| test_msg("Failed to free part of bitmap space %d\n", ret); |
| return ret; |
| } |
| |
| /* Confirm that only those 2 ranges are marked as free. */ |
| if (!test_check_exists(cache, SZ_128M - SZ_256K, SZ_128K)) { |
| test_msg("Free space range missing\n"); |
| return -ENOENT; |
| } |
| if (!test_check_exists(cache, SZ_128M + SZ_512K, SZ_256K)) { |
| test_msg("Free space range missing\n"); |
| return -ENOENT; |
| } |
| |
| /* |
| * Confirm that the bitmap range [128Mb + 768Kb, 256Mb[ isn't marked |
| * as free anymore. |
| */ |
| if (test_check_exists(cache, SZ_128M + 768 * SZ_1K, |
| SZ_128M - 768 * SZ_1K)) { |
| test_msg("Bitmap region not removed from space cache\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Confirm that the region [128Mb + 256Kb, 128Mb + 512Kb[, which is |
| * covered by the bitmap, isn't marked as free. |
| */ |
| if (test_check_exists(cache, SZ_128M + SZ_256K, SZ_256K)) { |
| test_msg("Invalid bitmap region marked as free\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Confirm that the region [128Mb, 128Mb + 256Kb[, which is covered |
| * by the bitmap too, isn't marked as free either. |
| */ |
| if (test_check_exists(cache, SZ_128M, SZ_256K)) { |
| test_msg("Invalid bitmap region marked as free\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Now lets mark the region [128Mb, 128Mb + 512Kb[ as free too. But, |
| * lets make sure the free space cache marks it as free in the bitmap, |
| * and doesn't insert a new extent entry to represent this region. |
| */ |
| ret = btrfs_add_free_space(cache, SZ_128M, SZ_512K); |
| if (ret) { |
| test_msg("Error adding free space: %d\n", ret); |
| return ret; |
| } |
| /* Confirm the region is marked as free. */ |
| if (!test_check_exists(cache, SZ_128M, SZ_512K)) { |
| test_msg("Bitmap region not marked as free\n"); |
| return -ENOENT; |
| } |
| |
| /* |
| * Confirm that no new extent entries or bitmap entries were added to |
| * the cache after adding that free space region. |
| */ |
| ret = check_num_extents_and_bitmaps(cache, 2, 1); |
| if (ret) |
| return ret; |
| |
| /* |
| * Now lets add a small free space region to the right of the previous |
| * one, which is not contiguous with it and is part of the bitmap too. |
| * The goal is to test that the bitmap entry space stealing doesn't |
| * steal this space region. |
| */ |
| ret = btrfs_add_free_space(cache, SZ_128M + SZ_16M, sectorsize); |
| if (ret) { |
| test_msg("Error adding free space: %d\n", ret); |
| return ret; |
| } |
| |
| /* |
| * Confirm that no new extent entries or bitmap entries were added to |
| * the cache after adding that free space region. |
| */ |
| ret = check_num_extents_and_bitmaps(cache, 2, 1); |
| if (ret) |
| return ret; |
| |
| /* |
| * Now mark the region [128Mb - 128Kb, 128Mb[ as free too. This will |
| * expand the range covered by the existing extent entry that represents |
| * the free space [128Mb - 256Kb, 128Mb - 128Kb[. |
| */ |
| ret = btrfs_add_free_space(cache, SZ_128M - SZ_128K, SZ_128K); |
| if (ret) { |
| test_msg("Error adding free space: %d\n", ret); |
| return ret; |
| } |
| /* Confirm the region is marked as free. */ |
| if (!test_check_exists(cache, SZ_128M - SZ_128K, SZ_128K)) { |
| test_msg("Extent region not marked as free\n"); |
| return -ENOENT; |
| } |
| |
| /* |
| * Confirm that our extent entry didn't stole all free space from the |
| * bitmap, because of the small 4Kb free space region. |
| */ |
| ret = check_num_extents_and_bitmaps(cache, 2, 1); |
| if (ret) |
| return ret; |
| |
| /* |
| * So now we have the range [128Mb - 256Kb, 128Mb + 768Kb[ as free |
| * space. Without stealing bitmap free space into extent entry space, |
| * we would have all this free space represented by 2 entries in the |
| * cache: |
| * |
| * extent entry covering range: [128Mb - 256Kb, 128Mb[ |
| * bitmap entry covering range: [128Mb, 128Mb + 768Kb[ |
| * |
| * Attempting to allocate the whole free space (1Mb) would fail, because |
| * we can't allocate from multiple entries. |
| * With the bitmap free space stealing, we get a single extent entry |
| * that represents the 1Mb free space, and therefore we're able to |
| * allocate the whole free space at once. |
| */ |
| if (!test_check_exists(cache, SZ_128M - SZ_256K, SZ_1M)) { |
| test_msg("Expected region not marked as free\n"); |
| return -ENOENT; |
| } |
| |
| if (cache->free_space_ctl->free_space != (SZ_1M + sectorsize)) { |
| test_msg("Cache free space is not 1Mb + %u\n", sectorsize); |
| return -EINVAL; |
| } |
| |
| offset = btrfs_find_space_for_alloc(cache, |
| 0, SZ_1M, 0, |
| &max_extent_size); |
| if (offset != (SZ_128M - SZ_256K)) { |
| test_msg("Failed to allocate 1Mb from space cache, returned offset is: %llu\n", |
| offset); |
| return -EINVAL; |
| } |
| |
| /* |
| * All that remains is a sectorsize free space region in a bitmap. |
| * Confirm. |
| */ |
| ret = check_num_extents_and_bitmaps(cache, 1, 1); |
| if (ret) |
| return ret; |
| |
| if (cache->free_space_ctl->free_space != sectorsize) { |
| test_msg("Cache free space is not %u\n", sectorsize); |
| return -EINVAL; |
| } |
| |
| offset = btrfs_find_space_for_alloc(cache, |
| 0, sectorsize, 0, |
| &max_extent_size); |
| if (offset != (SZ_128M + SZ_16M)) { |
| test_msg("Failed to allocate %u, returned offset : %llu\n", |
| sectorsize, offset); |
| return -EINVAL; |
| } |
| |
| ret = check_cache_empty(cache); |
| if (ret) |
| return ret; |
| |
| __btrfs_remove_free_space_cache(cache->free_space_ctl); |
| |
| /* |
| * Now test a similar scenario, but where our extent entry is located |
| * to the right of the bitmap entry, so that we can check that stealing |
| * space from a bitmap to the front of an extent entry works. |
| */ |
| |
| /* |
| * Extent entry covering free space range [128Mb + 128Kb, 128Mb + 256Kb[ |
| */ |
| ret = test_add_free_space_entry(cache, SZ_128M + SZ_128K, SZ_128K, 0); |
| if (ret) { |
| test_msg("Couldn't add extent entry %d\n", ret); |
| return ret; |
| } |
| |
| /* Bitmap entry covering free space range [0, 128Mb - 512Kb[ */ |
| ret = test_add_free_space_entry(cache, 0, SZ_128M - SZ_512K, 1); |
| if (ret) { |
| test_msg("Couldn't add bitmap entry %d\n", ret); |
| return ret; |
| } |
| |
| ret = check_num_extents_and_bitmaps(cache, 2, 1); |
| if (ret) |
| return ret; |
| |
| /* |
| * Now make only the last 256Kb of the bitmap marked as free, so that |
| * we end up with only the following ranges marked as free space: |
| * |
| * [128Mb + 128b, 128Mb + 256Kb[ |
| * [128Mb - 768Kb, 128Mb - 512Kb[ |
| */ |
| ret = btrfs_remove_free_space(cache, 0, SZ_128M - 768 * SZ_1K); |
| if (ret) { |
| test_msg("Failed to free part of bitmap space %d\n", ret); |
| return ret; |
| } |
| |
| /* Confirm that only those 2 ranges are marked as free. */ |
| if (!test_check_exists(cache, SZ_128M + SZ_128K, SZ_128K)) { |
| test_msg("Free space range missing\n"); |
| return -ENOENT; |
| } |
| if (!test_check_exists(cache, SZ_128M - 768 * SZ_1K, SZ_256K)) { |
| test_msg("Free space range missing\n"); |
| return -ENOENT; |
| } |
| |
| /* |
| * Confirm that the bitmap range [0, 128Mb - 768Kb[ isn't marked |
| * as free anymore. |
| */ |
| if (test_check_exists(cache, 0, SZ_128M - 768 * SZ_1K)) { |
| test_msg("Bitmap region not removed from space cache\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Confirm that the region [128Mb - 512Kb, 128Mb[, which is |
| * covered by the bitmap, isn't marked as free. |
| */ |
| if (test_check_exists(cache, SZ_128M - SZ_512K, SZ_512K)) { |
| test_msg("Invalid bitmap region marked as free\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Now lets mark the region [128Mb - 512Kb, 128Mb[ as free too. But, |
| * lets make sure the free space cache marks it as free in the bitmap, |
| * and doesn't insert a new extent entry to represent this region. |
| */ |
| ret = btrfs_add_free_space(cache, SZ_128M - SZ_512K, SZ_512K); |
| if (ret) { |
| test_msg("Error adding free space: %d\n", ret); |
| return ret; |
| } |
| /* Confirm the region is marked as free. */ |
| if (!test_check_exists(cache, SZ_128M - SZ_512K, SZ_512K)) { |
| test_msg("Bitmap region not marked as free\n"); |
| return -ENOENT; |
| } |
| |
| /* |
| * Confirm that no new extent entries or bitmap entries were added to |
| * the cache after adding that free space region. |
| */ |
| ret = check_num_extents_and_bitmaps(cache, 2, 1); |
| if (ret) |
| return ret; |
| |
| /* |
| * Now lets add a small free space region to the left of the previous |
| * one, which is not contiguous with it and is part of the bitmap too. |
| * The goal is to test that the bitmap entry space stealing doesn't |
| * steal this space region. |
| */ |
| ret = btrfs_add_free_space(cache, SZ_32M, 2 * sectorsize); |
| if (ret) { |
| test_msg("Error adding free space: %d\n", ret); |
| return ret; |
| } |
| |
| /* |
| * Now mark the region [128Mb, 128Mb + 128Kb[ as free too. This will |
| * expand the range covered by the existing extent entry that represents |
| * the free space [128Mb + 128Kb, 128Mb + 256Kb[. |
| */ |
| ret = btrfs_add_free_space(cache, SZ_128M, SZ_128K); |
| if (ret) { |
| test_msg("Error adding free space: %d\n", ret); |
| return ret; |
| } |
| /* Confirm the region is marked as free. */ |
| if (!test_check_exists(cache, SZ_128M, SZ_128K)) { |
| test_msg("Extent region not marked as free\n"); |
| return -ENOENT; |
| } |
| |
| /* |
| * Confirm that our extent entry didn't stole all free space from the |
| * bitmap, because of the small 2 * sectorsize free space region. |
| */ |
| ret = check_num_extents_and_bitmaps(cache, 2, 1); |
| if (ret) |
| return ret; |
| |
| /* |
| * So now we have the range [128Mb - 768Kb, 128Mb + 256Kb[ as free |
| * space. Without stealing bitmap free space into extent entry space, |
| * we would have all this free space represented by 2 entries in the |
| * cache: |
| * |
| * extent entry covering range: [128Mb, 128Mb + 256Kb[ |
| * bitmap entry covering range: [128Mb - 768Kb, 128Mb[ |
| * |
| * Attempting to allocate the whole free space (1Mb) would fail, because |
| * we can't allocate from multiple entries. |
| * With the bitmap free space stealing, we get a single extent entry |
| * that represents the 1Mb free space, and therefore we're able to |
| * allocate the whole free space at once. |
| */ |
| if (!test_check_exists(cache, SZ_128M - 768 * SZ_1K, SZ_1M)) { |
| test_msg("Expected region not marked as free\n"); |
| return -ENOENT; |
| } |
| |
| if (cache->free_space_ctl->free_space != (SZ_1M + 2 * sectorsize)) { |
| test_msg("Cache free space is not 1Mb + %u\n", 2 * sectorsize); |
| return -EINVAL; |
| } |
| |
| offset = btrfs_find_space_for_alloc(cache, 0, SZ_1M, 0, |
| &max_extent_size); |
| if (offset != (SZ_128M - 768 * SZ_1K)) { |
| test_msg("Failed to allocate 1Mb from space cache, returned offset is: %llu\n", |
| offset); |
| return -EINVAL; |
| } |
| |
| /* |
| * All that remains is 2 * sectorsize free space region |
| * in a bitmap. Confirm. |
| */ |
| ret = check_num_extents_and_bitmaps(cache, 1, 1); |
| if (ret) |
| return ret; |
| |
| if (cache->free_space_ctl->free_space != 2 * sectorsize) { |
| test_msg("Cache free space is not %u\n", 2 * sectorsize); |
| return -EINVAL; |
| } |
| |
| offset = btrfs_find_space_for_alloc(cache, |
| 0, 2 * sectorsize, 0, |
| &max_extent_size); |
| if (offset != SZ_32M) { |
| test_msg("Failed to allocate %u, offset: %llu\n", |
| 2 * sectorsize, |
| offset); |
| return -EINVAL; |
| } |
| |
| ret = check_cache_empty(cache); |
| if (ret) |
| return ret; |
| |
| cache->free_space_ctl->op = orig_free_space_ops; |
| __btrfs_remove_free_space_cache(cache->free_space_ctl); |
| |
| return 0; |
| } |
| |
| int btrfs_test_free_space_cache(u32 sectorsize, u32 nodesize) |
| { |
| struct btrfs_block_group_cache *cache; |
| struct btrfs_root *root = NULL; |
| int ret = -ENOMEM; |
| |
| test_msg("Running btrfs free space cache tests\n"); |
| |
| /* |
| * For ppc64 (with 64k page size), bytes per bitmap might be |
| * larger than 1G. To make bitmap test available in ppc64, |
| * alloc dummy block group whose size cross bitmaps. |
| */ |
| cache = btrfs_alloc_dummy_block_group(BITS_PER_BITMAP * sectorsize |
| + PAGE_SIZE, sectorsize); |
| if (!cache) { |
| test_msg("Couldn't run the tests\n"); |
| return 0; |
| } |
| |
| root = btrfs_alloc_dummy_root(sectorsize, nodesize); |
| if (IS_ERR(root)) { |
| ret = PTR_ERR(root); |
| goto out; |
| } |
| |
| root->fs_info = btrfs_alloc_dummy_fs_info(); |
| if (!root->fs_info) |
| goto out; |
| |
| root->fs_info->extent_root = root; |
| cache->fs_info = root->fs_info; |
| |
| ret = test_extents(cache); |
| if (ret) |
| goto out; |
| ret = test_bitmaps(cache, sectorsize); |
| if (ret) |
| goto out; |
| ret = test_bitmaps_and_extents(cache, sectorsize); |
| if (ret) |
| goto out; |
| |
| ret = test_steal_space_from_bitmap_to_extent(cache, sectorsize); |
| out: |
| btrfs_free_dummy_block_group(cache); |
| btrfs_free_dummy_root(root); |
| test_msg("Free space cache tests finished\n"); |
| return ret; |
| } |