| /* |
| * DVB USB framework |
| * |
| * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@posteo.de> |
| * Copyright (C) 2012 Antti Palosaari <crope@iki.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| */ |
| |
| #ifndef DVB_USB_H |
| #define DVB_USB_H |
| |
| #include <linux/usb/input.h> |
| #include <linux/firmware.h> |
| #include <media/rc-core.h> |
| #include <media/media-device.h> |
| |
| #include "dvb_frontend.h" |
| #include "dvb_demux.h" |
| #include "dvb_net.h" |
| #include "dmxdev.h" |
| #include "dvb-usb-ids.h" |
| |
| /* |
| * device file: /dev/dvb/adapter[0-1]/frontend[0-2] |
| * |
| * |-- device |
| * | |-- adapter0 |
| * | | |-- frontend0 |
| * | | |-- frontend1 |
| * | | `-- frontend2 |
| * | `-- adapter1 |
| * | |-- frontend0 |
| * | |-- frontend1 |
| * | `-- frontend2 |
| * |
| * |
| * Commonly used variable names: |
| * d = pointer to device (struct dvb_usb_device *) |
| * adap = pointer to adapter (struct dvb_usb_adapter *) |
| * fe = pointer to frontend (struct dvb_frontend *) |
| * |
| * Use macros defined in that file to resolve needed pointers. |
| */ |
| |
| /* helper macros for every DVB USB driver use */ |
| #define adap_to_d(adap) (container_of(adap, struct dvb_usb_device, \ |
| adapter[adap->id])) |
| #define adap_to_priv(adap) (adap_to_d(adap)->priv) |
| #define fe_to_adap(fe) ((struct dvb_usb_adapter *) ((fe)->dvb->priv)) |
| #define fe_to_d(fe) (adap_to_d(fe_to_adap(fe))) |
| #define fe_to_priv(fe) (fe_to_d(fe)->priv) |
| #define d_to_priv(d) (d->priv) |
| |
| #define dvb_usb_dbg_usb_control_msg(udev, r, t, v, i, b, l) { \ |
| char *direction; \ |
| if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \ |
| direction = ">>>"; \ |
| else \ |
| direction = "<<<"; \ |
| dev_dbg(&udev->dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x " \ |
| "%s %*ph\n", __func__, t, r, v & 0xff, v >> 8, \ |
| i & 0xff, i >> 8, l & 0xff, l >> 8, direction, l, b); \ |
| } |
| |
| #define DVB_USB_STREAM_BULK(endpoint_, count_, size_) { \ |
| .type = USB_BULK, \ |
| .count = count_, \ |
| .endpoint = endpoint_, \ |
| .u = { \ |
| .bulk = { \ |
| .buffersize = size_, \ |
| } \ |
| } \ |
| } |
| |
| #define DVB_USB_STREAM_ISOC(endpoint_, count_, frames_, size_, interval_) { \ |
| .type = USB_ISOC, \ |
| .count = count_, \ |
| .endpoint = endpoint_, \ |
| .u = { \ |
| .isoc = { \ |
| .framesperurb = frames_, \ |
| .framesize = size_,\ |
| .interval = interval_, \ |
| } \ |
| } \ |
| } |
| |
| #define DVB_USB_DEVICE(vend, prod, props_, name_, rc) \ |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \ |
| .idVendor = (vend), \ |
| .idProduct = (prod), \ |
| .driver_info = (kernel_ulong_t) &((const struct dvb_usb_driver_info) { \ |
| .props = (props_), \ |
| .name = (name_), \ |
| .rc_map = (rc), \ |
| }) |
| |
| struct dvb_usb_device; |
| struct dvb_usb_adapter; |
| |
| /** |
| * structure for carrying all needed data from the device driver to the general |
| * dvb usb routines |
| * @name: device name |
| * @rc_map: name of rc codes table |
| * @props: structure containing all device properties |
| */ |
| struct dvb_usb_driver_info { |
| const char *name; |
| const char *rc_map; |
| const struct dvb_usb_device_properties *props; |
| }; |
| |
| /** |
| * structure for remote controller configuration |
| * @map_name: name of rc codes table |
| * @allowed_protos: protocol(s) supported by the driver |
| * @change_protocol: callback to change protocol |
| * @query: called to query an event from the device |
| * @interval: time in ms between two queries |
| * @driver_type: used to point if a device supports raw mode |
| * @bulk_mode: device supports bulk mode for rc (disable polling mode) |
| */ |
| struct dvb_usb_rc { |
| const char *map_name; |
| u64 allowed_protos; |
| int (*change_protocol)(struct rc_dev *dev, u64 *rc_type); |
| int (*query) (struct dvb_usb_device *d); |
| unsigned int interval; |
| enum rc_driver_type driver_type; |
| bool bulk_mode; |
| }; |
| |
| /** |
| * usb streaming configration for adapter |
| * @type: urb type |
| * @count: count of used urbs |
| * @endpoint: stream usb endpoint number |
| */ |
| struct usb_data_stream_properties { |
| #define USB_BULK 1 |
| #define USB_ISOC 2 |
| u8 type; |
| u8 count; |
| u8 endpoint; |
| |
| union { |
| struct { |
| unsigned int buffersize; /* per URB */ |
| } bulk; |
| struct { |
| int framesperurb; |
| int framesize; |
| int interval; |
| } isoc; |
| } u; |
| }; |
| |
| /** |
| * properties of dvb usb device adapter |
| * @caps: adapter capabilities |
| * @pid_filter_count: pid count of adapter pid-filter |
| * @pid_filter_ctrl: called to enable/disable pid-filter |
| * @pid_filter: called to set/unset pid for filtering |
| * @stream: adapter usb stream configuration |
| */ |
| #define MAX_NO_OF_FE_PER_ADAP 3 |
| struct dvb_usb_adapter_properties { |
| #define DVB_USB_ADAP_HAS_PID_FILTER 0x01 |
| #define DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF 0x02 |
| #define DVB_USB_ADAP_NEED_PID_FILTERING 0x04 |
| u8 caps; |
| |
| u8 pid_filter_count; |
| int (*pid_filter_ctrl) (struct dvb_usb_adapter *, int); |
| int (*pid_filter) (struct dvb_usb_adapter *, int, u16, int); |
| |
| struct usb_data_stream_properties stream; |
| }; |
| |
| /** |
| * struct dvb_usb_device_properties - properties of a dvb-usb-device |
| * @driver_name: name of the owning driver module |
| * @owner: owner of the dvb_adapter |
| * @adapter_nr: values from the DVB_DEFINE_MOD_OPT_ADAPTER_NR() macro |
| * @bInterfaceNumber: usb interface number driver binds |
| * @size_of_priv: bytes allocated for the driver private data |
| * @generic_bulk_ctrl_endpoint: bulk control endpoint number for sent |
| * @generic_bulk_ctrl_endpoint_response: bulk control endpoint number for |
| * receive |
| * @generic_bulk_ctrl_delay: delay between bulk control sent and receive message |
| * @identify_state: called to determine the firmware state (cold or warm) and |
| * return possible firmware file name to be loaded |
| * @firmware: name of the firmware file to be loaded |
| * @download_firmware: called to download the firmware |
| * @i2c_algo: i2c_algorithm if the device has i2c-adapter |
| * @num_adapters: dvb usb device adapter count |
| * @get_adapter_count: called to resolve adapter count |
| * @adapter: array of all adapter properties of device |
| * @power_ctrl: called to enable/disable power of the device |
| * @read_config: called to resolve device configuration |
| * @read_mac_address: called to resolve adapter mac-address |
| * @frontend_attach: called to attach the possible frontends |
| * @frontend_detach: called to detach the possible frontends |
| * @tuner_attach: called to attach the possible tuners |
| * @frontend_ctrl: called to power on/off active frontend |
| * @streaming_ctrl: called to start/stop the usb streaming of adapter |
| * @init: called after adapters are created in order to finalize device |
| * configuration |
| * @exit: called when driver is unloaded |
| * @get_rc_config: called to resolve used remote controller configuration |
| * @get_stream_config: called to resolve input and output stream configuration |
| * of the adapter just before streaming is started. input stream is transport |
| * stream from the demodulator and output stream is usb stream to host. |
| */ |
| #define MAX_NO_OF_ADAPTER_PER_DEVICE 2 |
| struct dvb_usb_device_properties { |
| const char *driver_name; |
| struct module *owner; |
| short *adapter_nr; |
| |
| u8 bInterfaceNumber; |
| unsigned int size_of_priv; |
| u8 generic_bulk_ctrl_endpoint; |
| u8 generic_bulk_ctrl_endpoint_response; |
| unsigned int generic_bulk_ctrl_delay; |
| |
| #define WARM 0 |
| #define COLD 1 |
| int (*identify_state) (struct dvb_usb_device *, const char **); |
| const char *firmware; |
| #define RECONNECTS_USB 1 |
| int (*download_firmware) (struct dvb_usb_device *, |
| const struct firmware *); |
| |
| struct i2c_algorithm *i2c_algo; |
| |
| unsigned int num_adapters; |
| int (*get_adapter_count) (struct dvb_usb_device *); |
| struct dvb_usb_adapter_properties adapter[MAX_NO_OF_ADAPTER_PER_DEVICE]; |
| int (*power_ctrl) (struct dvb_usb_device *, int); |
| int (*read_config) (struct dvb_usb_device *d); |
| int (*read_mac_address) (struct dvb_usb_adapter *, u8 []); |
| int (*frontend_attach) (struct dvb_usb_adapter *); |
| int (*frontend_detach)(struct dvb_usb_adapter *); |
| int (*tuner_attach) (struct dvb_usb_adapter *); |
| int (*tuner_detach)(struct dvb_usb_adapter *); |
| int (*frontend_ctrl) (struct dvb_frontend *, int); |
| int (*streaming_ctrl) (struct dvb_frontend *, int); |
| int (*init) (struct dvb_usb_device *); |
| void (*exit) (struct dvb_usb_device *); |
| int (*get_rc_config) (struct dvb_usb_device *, struct dvb_usb_rc *); |
| #define DVB_USB_FE_TS_TYPE_188 0 |
| #define DVB_USB_FE_TS_TYPE_204 1 |
| #define DVB_USB_FE_TS_TYPE_RAW 2 |
| int (*get_stream_config) (struct dvb_frontend *, u8 *, |
| struct usb_data_stream_properties *); |
| }; |
| |
| /** |
| * generic object of an usb stream |
| * @buf_num: number of buffer allocated |
| * @buf_size: size of each buffer in buf_list |
| * @buf_list: array containing all allocate buffers for streaming |
| * @dma_addr: list of dma_addr_t for each buffer in buf_list |
| * |
| * @urbs_initialized: number of URBs initialized |
| * @urbs_submitted: number of URBs submitted |
| */ |
| #define MAX_NO_URBS_FOR_DATA_STREAM 10 |
| struct usb_data_stream { |
| struct usb_device *udev; |
| struct usb_data_stream_properties props; |
| |
| #define USB_STATE_INIT 0x00 |
| #define USB_STATE_URB_BUF 0x01 |
| u8 state; |
| |
| void (*complete) (struct usb_data_stream *, u8 *, size_t); |
| |
| struct urb *urb_list[MAX_NO_URBS_FOR_DATA_STREAM]; |
| int buf_num; |
| unsigned long buf_size; |
| u8 *buf_list[MAX_NO_URBS_FOR_DATA_STREAM]; |
| dma_addr_t dma_addr[MAX_NO_URBS_FOR_DATA_STREAM]; |
| |
| int urbs_initialized; |
| int urbs_submitted; |
| |
| void *user_priv; |
| }; |
| |
| /** |
| * dvb adapter object on dvb usb device |
| * @props: pointer to adapter properties |
| * @stream: adapter the usb data stream |
| * @id: index of this adapter (starting with 0) |
| * @ts_type: transport stream, input stream, type |
| * @suspend_resume_active: set when there is ongoing suspend / resume |
| * @pid_filtering: is hardware pid_filtering used or not |
| * @feed_count: current feed count |
| * @max_feed_count: maimum feed count device can handle |
| * @dvb_adap: adapter dvb_adapter |
| * @dmxdev: adapter dmxdev |
| * @demux: adapter software demuxer |
| * @dvb_net: adapter dvb_net interfaces |
| * @sync_mutex: mutex used to sync control and streaming of the adapter |
| * @fe: adapter frontends |
| * @fe_init: rerouted frontend-init function |
| * @fe_sleep: rerouted frontend-sleep function |
| */ |
| struct dvb_usb_adapter { |
| const struct dvb_usb_adapter_properties *props; |
| struct usb_data_stream stream; |
| u8 id; |
| u8 ts_type; |
| bool suspend_resume_active; |
| bool pid_filtering; |
| u8 feed_count; |
| u8 max_feed_count; |
| s8 active_fe; |
| #define ADAP_INIT 0 |
| #define ADAP_SLEEP 1 |
| #define ADAP_STREAMING 2 |
| unsigned long state_bits; |
| |
| /* dvb */ |
| struct dvb_adapter dvb_adap; |
| struct dmxdev dmxdev; |
| struct dvb_demux demux; |
| struct dvb_net dvb_net; |
| |
| struct dvb_frontend *fe[MAX_NO_OF_FE_PER_ADAP]; |
| int (*fe_init[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *); |
| int (*fe_sleep[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *); |
| }; |
| |
| /** |
| * dvb usb device object |
| * @props: device properties |
| * @name: device name |
| * @rc_map: name of rc codes table |
| * @rc_polling_active: set when RC polling is active |
| * @intf: pointer to the device's struct usb_interface |
| * @udev: pointer to the device's struct usb_device |
| * @rc: remote controller configuration |
| * @powered: indicated whether the device is power or not |
| * @usb_mutex: mutex for usb control messages |
| * @i2c_mutex: mutex for i2c-transfers |
| * @i2c_adap: device's i2c-adapter |
| * @rc_dev: rc device for the remote control |
| * @rc_query_work: work for polling remote |
| * @priv: private data of the actual driver (allocate by dvb usb, size defined |
| * in size_of_priv of dvb_usb_properties). |
| */ |
| struct dvb_usb_device { |
| const struct dvb_usb_device_properties *props; |
| const char *name; |
| const char *rc_map; |
| bool rc_polling_active; |
| struct usb_interface *intf; |
| struct usb_device *udev; |
| struct dvb_usb_rc rc; |
| int powered; |
| |
| /* locking */ |
| struct mutex usb_mutex; |
| |
| /* i2c */ |
| struct mutex i2c_mutex; |
| struct i2c_adapter i2c_adap; |
| |
| struct dvb_usb_adapter adapter[MAX_NO_OF_ADAPTER_PER_DEVICE]; |
| |
| /* remote control */ |
| struct rc_dev *rc_dev; |
| char rc_phys[64]; |
| struct delayed_work rc_query_work; |
| |
| void *priv; |
| }; |
| |
| extern int dvb_usbv2_probe(struct usb_interface *, |
| const struct usb_device_id *); |
| extern void dvb_usbv2_disconnect(struct usb_interface *); |
| extern int dvb_usbv2_suspend(struct usb_interface *, pm_message_t); |
| extern int dvb_usbv2_resume(struct usb_interface *); |
| extern int dvb_usbv2_reset_resume(struct usb_interface *); |
| |
| /* the generic read/write method for device control */ |
| extern int dvb_usbv2_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16); |
| extern int dvb_usbv2_generic_write(struct dvb_usb_device *, u8 *, u16); |
| /* caller must hold lock when locked versions are called */ |
| extern int dvb_usbv2_generic_rw_locked(struct dvb_usb_device *, |
| u8 *, u16, u8 *, u16); |
| extern int dvb_usbv2_generic_write_locked(struct dvb_usb_device *, u8 *, u16); |
| |
| #endif |
