| /* (C) 2015 Pengutronix, Alexander Aring <aar@pengutronix.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Authors: |
| * Alexander Aring <aar@pengutronix.de> |
| * Eric Anholt <eric@anholt.net> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_domain.h> |
| #include <dt-bindings/power/raspberrypi-power.h> |
| #include <soc/bcm2835/raspberrypi-firmware.h> |
| |
| /* |
| * Firmware indices for the old power domains interface. Only a few |
| * of them were actually implemented. |
| */ |
| #define RPI_OLD_POWER_DOMAIN_USB 3 |
| #define RPI_OLD_POWER_DOMAIN_V3D 10 |
| |
| struct rpi_power_domain { |
| u32 domain; |
| bool enabled; |
| bool old_interface; |
| struct generic_pm_domain base; |
| struct rpi_firmware *fw; |
| }; |
| |
| struct rpi_power_domains { |
| bool has_new_interface; |
| struct genpd_onecell_data xlate; |
| struct rpi_firmware *fw; |
| struct rpi_power_domain domains[RPI_POWER_DOMAIN_COUNT]; |
| }; |
| |
| /* |
| * Packet definition used by RPI_FIRMWARE_SET_POWER_STATE and |
| * RPI_FIRMWARE_SET_DOMAIN_STATE |
| */ |
| struct rpi_power_domain_packet { |
| u32 domain; |
| u32 on; |
| } __packet; |
| |
| /* |
| * Asks the firmware to enable or disable power on a specific power |
| * domain. |
| */ |
| static int rpi_firmware_set_power(struct rpi_power_domain *rpi_domain, bool on) |
| { |
| struct rpi_power_domain_packet packet; |
| |
| packet.domain = rpi_domain->domain; |
| packet.on = on; |
| return rpi_firmware_property(rpi_domain->fw, |
| rpi_domain->old_interface ? |
| RPI_FIRMWARE_SET_POWER_STATE : |
| RPI_FIRMWARE_SET_DOMAIN_STATE, |
| &packet, sizeof(packet)); |
| } |
| |
| static int rpi_domain_off(struct generic_pm_domain *domain) |
| { |
| struct rpi_power_domain *rpi_domain = |
| container_of(domain, struct rpi_power_domain, base); |
| |
| return rpi_firmware_set_power(rpi_domain, false); |
| } |
| |
| static int rpi_domain_on(struct generic_pm_domain *domain) |
| { |
| struct rpi_power_domain *rpi_domain = |
| container_of(domain, struct rpi_power_domain, base); |
| |
| return rpi_firmware_set_power(rpi_domain, true); |
| } |
| |
| static void rpi_common_init_power_domain(struct rpi_power_domains *rpi_domains, |
| int xlate_index, const char *name) |
| { |
| struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index]; |
| |
| dom->fw = rpi_domains->fw; |
| |
| dom->base.name = name; |
| dom->base.power_on = rpi_domain_on; |
| dom->base.power_off = rpi_domain_off; |
| |
| /* |
| * Treat all power domains as off at boot. |
| * |
| * The firmware itself may be keeping some domains on, but |
| * from Linux's perspective all we control is the refcounts |
| * that we give to the firmware, and we can't ask the firmware |
| * to turn off something that we haven't ourselves turned on. |
| */ |
| pm_genpd_init(&dom->base, NULL, true); |
| |
| rpi_domains->xlate.domains[xlate_index] = &dom->base; |
| } |
| |
| static void rpi_init_power_domain(struct rpi_power_domains *rpi_domains, |
| int xlate_index, const char *name) |
| { |
| struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index]; |
| |
| if (!rpi_domains->has_new_interface) |
| return; |
| |
| /* The DT binding index is the firmware's domain index minus one. */ |
| dom->domain = xlate_index + 1; |
| |
| rpi_common_init_power_domain(rpi_domains, xlate_index, name); |
| } |
| |
| static void rpi_init_old_power_domain(struct rpi_power_domains *rpi_domains, |
| int xlate_index, int domain, |
| const char *name) |
| { |
| struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index]; |
| |
| dom->old_interface = true; |
| dom->domain = domain; |
| |
| rpi_common_init_power_domain(rpi_domains, xlate_index, name); |
| } |
| |
| /* |
| * Detects whether the firmware supports the new power domains interface. |
| * |
| * The firmware doesn't actually return an error on an unknown tag, |
| * and just skips over it, so we do the detection by putting an |
| * unexpected value in the return field and checking if it was |
| * unchanged. |
| */ |
| static bool |
| rpi_has_new_domain_support(struct rpi_power_domains *rpi_domains) |
| { |
| struct rpi_power_domain_packet packet; |
| int ret; |
| |
| packet.domain = RPI_POWER_DOMAIN_ARM; |
| packet.on = ~0; |
| |
| ret = rpi_firmware_property(rpi_domains->fw, |
| RPI_FIRMWARE_GET_DOMAIN_STATE, |
| &packet, sizeof(packet)); |
| |
| return ret == 0 && packet.on != ~0; |
| } |
| |
| static int rpi_power_probe(struct platform_device *pdev) |
| { |
| struct device_node *fw_np; |
| struct device *dev = &pdev->dev; |
| struct rpi_power_domains *rpi_domains; |
| |
| rpi_domains = devm_kzalloc(dev, sizeof(*rpi_domains), GFP_KERNEL); |
| if (!rpi_domains) |
| return -ENOMEM; |
| |
| rpi_domains->xlate.domains = |
| devm_kzalloc(dev, sizeof(*rpi_domains->xlate.domains) * |
| RPI_POWER_DOMAIN_COUNT, GFP_KERNEL); |
| if (!rpi_domains->xlate.domains) |
| return -ENOMEM; |
| |
| rpi_domains->xlate.num_domains = RPI_POWER_DOMAIN_COUNT; |
| |
| fw_np = of_parse_phandle(pdev->dev.of_node, "firmware", 0); |
| if (!fw_np) { |
| dev_err(&pdev->dev, "no firmware node\n"); |
| return -ENODEV; |
| } |
| |
| rpi_domains->fw = rpi_firmware_get(fw_np); |
| of_node_put(fw_np); |
| if (!rpi_domains->fw) |
| return -EPROBE_DEFER; |
| |
| rpi_domains->has_new_interface = |
| rpi_has_new_domain_support(rpi_domains); |
| |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C0, "I2C0"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C1, "I2C1"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C2, "I2C2"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VIDEO_SCALER, |
| "VIDEO_SCALER"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VPU1, "VPU1"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_HDMI, "HDMI"); |
| |
| /* |
| * Use the old firmware interface for USB power, so that we |
| * can turn it on even if the firmware hasn't been updated. |
| */ |
| rpi_init_old_power_domain(rpi_domains, RPI_POWER_DOMAIN_USB, |
| RPI_OLD_POWER_DOMAIN_USB, "USB"); |
| |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VEC, "VEC"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_JPEG, "JPEG"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_H264, "H264"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_V3D, "V3D"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_ISP, "ISP"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_UNICAM0, "UNICAM0"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_UNICAM1, "UNICAM1"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CCP2RX, "CCP2RX"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CSI2, "CSI2"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CPI, "CPI"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_DSI0, "DSI0"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_DSI1, "DSI1"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_TRANSPOSER, |
| "TRANSPOSER"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CCP2TX, "CCP2TX"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CDP, "CDP"); |
| rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_ARM, "ARM"); |
| |
| of_genpd_add_provider_onecell(dev->of_node, &rpi_domains->xlate); |
| |
| platform_set_drvdata(pdev, rpi_domains); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id rpi_power_of_match[] = { |
| { .compatible = "raspberrypi,bcm2835-power", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, rpi_power_of_match); |
| |
| static struct platform_driver rpi_power_driver = { |
| .driver = { |
| .name = "raspberrypi-power", |
| .of_match_table = rpi_power_of_match, |
| }, |
| .probe = rpi_power_probe, |
| }; |
| builtin_platform_driver(rpi_power_driver); |
| |
| MODULE_AUTHOR("Alexander Aring <aar@pengutronix.de>"); |
| MODULE_AUTHOR("Eric Anholt <eric@anholt.net>"); |
| MODULE_DESCRIPTION("Raspberry Pi power domain driver"); |
| MODULE_LICENSE("GPL v2"); |