| /* |
| Samsung S5H1409 VSB/QAM demodulator driver |
| |
| Copyright (C) 2006 Steven Toth <stoth@linuxtv.org> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include "dvb_frontend.h" |
| #include "s5h1409.h" |
| |
| struct s5h1409_state { |
| |
| struct i2c_adapter *i2c; |
| |
| /* configuration settings */ |
| const struct s5h1409_config *config; |
| |
| struct dvb_frontend frontend; |
| |
| /* previous uncorrected block counter */ |
| enum fe_modulation current_modulation; |
| |
| u32 current_frequency; |
| int if_freq; |
| |
| u32 is_qam_locked; |
| |
| /* QAM tuning state goes through the following state transitions */ |
| #define QAM_STATE_UNTUNED 0 |
| #define QAM_STATE_TUNING_STARTED 1 |
| #define QAM_STATE_INTERLEAVE_SET 2 |
| #define QAM_STATE_QAM_OPTIMIZED_L1 3 |
| #define QAM_STATE_QAM_OPTIMIZED_L2 4 |
| #define QAM_STATE_QAM_OPTIMIZED_L3 5 |
| u8 qam_state; |
| }; |
| |
| static int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Enable verbose debug messages"); |
| |
| #define dprintk if (debug) printk |
| |
| /* Register values to initialise the demod, this will set VSB by default */ |
| static struct init_tab { |
| u8 reg; |
| u16 data; |
| } init_tab[] = { |
| { 0x00, 0x0071, }, |
| { 0x01, 0x3213, }, |
| { 0x09, 0x0025, }, |
| { 0x1c, 0x001d, }, |
| { 0x1f, 0x002d, }, |
| { 0x20, 0x001d, }, |
| { 0x22, 0x0022, }, |
| { 0x23, 0x0020, }, |
| { 0x29, 0x110f, }, |
| { 0x2a, 0x10b4, }, |
| { 0x2b, 0x10ae, }, |
| { 0x2c, 0x0031, }, |
| { 0x31, 0x010d, }, |
| { 0x32, 0x0100, }, |
| { 0x44, 0x0510, }, |
| { 0x54, 0x0104, }, |
| { 0x58, 0x2222, }, |
| { 0x59, 0x1162, }, |
| { 0x5a, 0x3211, }, |
| { 0x5d, 0x0370, }, |
| { 0x5e, 0x0296, }, |
| { 0x61, 0x0010, }, |
| { 0x63, 0x4a00, }, |
| { 0x65, 0x0800, }, |
| { 0x71, 0x0003, }, |
| { 0x72, 0x0470, }, |
| { 0x81, 0x0002, }, |
| { 0x82, 0x0600, }, |
| { 0x86, 0x0002, }, |
| { 0x8a, 0x2c38, }, |
| { 0x8b, 0x2a37, }, |
| { 0x92, 0x302f, }, |
| { 0x93, 0x3332, }, |
| { 0x96, 0x000c, }, |
| { 0x99, 0x0101, }, |
| { 0x9c, 0x2e37, }, |
| { 0x9d, 0x2c37, }, |
| { 0x9e, 0x2c37, }, |
| { 0xab, 0x0100, }, |
| { 0xac, 0x1003, }, |
| { 0xad, 0x103f, }, |
| { 0xe2, 0x0100, }, |
| { 0xe3, 0x1000, }, |
| { 0x28, 0x1010, }, |
| { 0xb1, 0x000e, }, |
| }; |
| |
| /* VSB SNR lookup table */ |
| static struct vsb_snr_tab { |
| u16 val; |
| u16 data; |
| } vsb_snr_tab[] = { |
| { 924, 300, }, |
| { 923, 300, }, |
| { 918, 295, }, |
| { 915, 290, }, |
| { 911, 285, }, |
| { 906, 280, }, |
| { 901, 275, }, |
| { 896, 270, }, |
| { 891, 265, }, |
| { 885, 260, }, |
| { 879, 255, }, |
| { 873, 250, }, |
| { 864, 245, }, |
| { 858, 240, }, |
| { 850, 235, }, |
| { 841, 230, }, |
| { 832, 225, }, |
| { 823, 220, }, |
| { 812, 215, }, |
| { 802, 210, }, |
| { 788, 205, }, |
| { 778, 200, }, |
| { 767, 195, }, |
| { 753, 190, }, |
| { 740, 185, }, |
| { 725, 180, }, |
| { 707, 175, }, |
| { 689, 170, }, |
| { 671, 165, }, |
| { 656, 160, }, |
| { 637, 155, }, |
| { 616, 150, }, |
| { 542, 145, }, |
| { 519, 140, }, |
| { 507, 135, }, |
| { 497, 130, }, |
| { 492, 125, }, |
| { 474, 120, }, |
| { 300, 111, }, |
| { 0, 0, }, |
| }; |
| |
| /* QAM64 SNR lookup table */ |
| static struct qam64_snr_tab { |
| u16 val; |
| u16 data; |
| } qam64_snr_tab[] = { |
| { 1, 0, }, |
| { 12, 300, }, |
| { 15, 290, }, |
| { 18, 280, }, |
| { 22, 270, }, |
| { 23, 268, }, |
| { 24, 266, }, |
| { 25, 264, }, |
| { 27, 262, }, |
| { 28, 260, }, |
| { 29, 258, }, |
| { 30, 256, }, |
| { 32, 254, }, |
| { 33, 252, }, |
| { 34, 250, }, |
| { 35, 249, }, |
| { 36, 248, }, |
| { 37, 247, }, |
| { 38, 246, }, |
| { 39, 245, }, |
| { 40, 244, }, |
| { 41, 243, }, |
| { 42, 241, }, |
| { 43, 240, }, |
| { 44, 239, }, |
| { 45, 238, }, |
| { 46, 237, }, |
| { 47, 236, }, |
| { 48, 235, }, |
| { 49, 234, }, |
| { 50, 233, }, |
| { 51, 232, }, |
| { 52, 231, }, |
| { 53, 230, }, |
| { 55, 229, }, |
| { 56, 228, }, |
| { 57, 227, }, |
| { 58, 226, }, |
| { 59, 225, }, |
| { 60, 224, }, |
| { 62, 223, }, |
| { 63, 222, }, |
| { 65, 221, }, |
| { 66, 220, }, |
| { 68, 219, }, |
| { 69, 218, }, |
| { 70, 217, }, |
| { 72, 216, }, |
| { 73, 215, }, |
| { 75, 214, }, |
| { 76, 213, }, |
| { 78, 212, }, |
| { 80, 211, }, |
| { 81, 210, }, |
| { 83, 209, }, |
| { 84, 208, }, |
| { 85, 207, }, |
| { 87, 206, }, |
| { 89, 205, }, |
| { 91, 204, }, |
| { 93, 203, }, |
| { 95, 202, }, |
| { 96, 201, }, |
| { 104, 200, }, |
| { 255, 0, }, |
| }; |
| |
| /* QAM256 SNR lookup table */ |
| static struct qam256_snr_tab { |
| u16 val; |
| u16 data; |
| } qam256_snr_tab[] = { |
| { 1, 0, }, |
| { 12, 400, }, |
| { 13, 390, }, |
| { 15, 380, }, |
| { 17, 360, }, |
| { 19, 350, }, |
| { 22, 348, }, |
| { 23, 346, }, |
| { 24, 344, }, |
| { 25, 342, }, |
| { 26, 340, }, |
| { 27, 336, }, |
| { 28, 334, }, |
| { 29, 332, }, |
| { 30, 330, }, |
| { 31, 328, }, |
| { 32, 326, }, |
| { 33, 325, }, |
| { 34, 322, }, |
| { 35, 320, }, |
| { 37, 318, }, |
| { 39, 316, }, |
| { 40, 314, }, |
| { 41, 312, }, |
| { 42, 310, }, |
| { 43, 308, }, |
| { 46, 306, }, |
| { 47, 304, }, |
| { 49, 302, }, |
| { 51, 300, }, |
| { 53, 298, }, |
| { 54, 297, }, |
| { 55, 296, }, |
| { 56, 295, }, |
| { 57, 294, }, |
| { 59, 293, }, |
| { 60, 292, }, |
| { 61, 291, }, |
| { 63, 290, }, |
| { 64, 289, }, |
| { 65, 288, }, |
| { 66, 287, }, |
| { 68, 286, }, |
| { 69, 285, }, |
| { 71, 284, }, |
| { 72, 283, }, |
| { 74, 282, }, |
| { 75, 281, }, |
| { 76, 280, }, |
| { 77, 279, }, |
| { 78, 278, }, |
| { 81, 277, }, |
| { 83, 276, }, |
| { 84, 275, }, |
| { 86, 274, }, |
| { 87, 273, }, |
| { 89, 272, }, |
| { 90, 271, }, |
| { 92, 270, }, |
| { 93, 269, }, |
| { 95, 268, }, |
| { 96, 267, }, |
| { 98, 266, }, |
| { 100, 265, }, |
| { 102, 264, }, |
| { 104, 263, }, |
| { 105, 262, }, |
| { 106, 261, }, |
| { 110, 260, }, |
| { 255, 0, }, |
| }; |
| |
| /* 8 bit registers, 16 bit values */ |
| static int s5h1409_writereg(struct s5h1409_state *state, u8 reg, u16 data) |
| { |
| int ret; |
| u8 buf[] = { reg, data >> 8, data & 0xff }; |
| |
| struct i2c_msg msg = { .addr = state->config->demod_address, |
| .flags = 0, .buf = buf, .len = 3 }; |
| |
| ret = i2c_transfer(state->i2c, &msg, 1); |
| |
| if (ret != 1) |
| printk(KERN_ERR "%s: error (reg == 0x%02x, val == 0x%04x, " |
| "ret == %i)\n", __func__, reg, data, ret); |
| |
| return (ret != 1) ? -1 : 0; |
| } |
| |
| static u16 s5h1409_readreg(struct s5h1409_state *state, u8 reg) |
| { |
| int ret; |
| u8 b0[] = { reg }; |
| u8 b1[] = { 0, 0 }; |
| |
| struct i2c_msg msg[] = { |
| { .addr = state->config->demod_address, .flags = 0, |
| .buf = b0, .len = 1 }, |
| { .addr = state->config->demod_address, .flags = I2C_M_RD, |
| .buf = b1, .len = 2 } }; |
| |
| ret = i2c_transfer(state->i2c, msg, 2); |
| |
| if (ret != 2) |
| printk("%s: readreg error (ret == %i)\n", __func__, ret); |
| return (b1[0] << 8) | b1[1]; |
| } |
| |
| static int s5h1409_softreset(struct dvb_frontend *fe) |
| { |
| struct s5h1409_state *state = fe->demodulator_priv; |
| |
| dprintk("%s()\n", __func__); |
| |
| s5h1409_writereg(state, 0xf5, 0); |
| s5h1409_writereg(state, 0xf5, 1); |
| state->is_qam_locked = 0; |
| state->qam_state = QAM_STATE_UNTUNED; |
| return 0; |
| } |
| |
| #define S5H1409_VSB_IF_FREQ 5380 |
| #define S5H1409_QAM_IF_FREQ (state->config->qam_if) |
| |
| static int s5h1409_set_if_freq(struct dvb_frontend *fe, int KHz) |
| { |
| struct s5h1409_state *state = fe->demodulator_priv; |
| |
| dprintk("%s(%d KHz)\n", __func__, KHz); |
| |
| switch (KHz) { |
| case 4000: |
| s5h1409_writereg(state, 0x87, 0x014b); |
| s5h1409_writereg(state, 0x88, 0x0cb5); |
| s5h1409_writereg(state, 0x89, 0x03e2); |
| break; |
| case 5380: |
| case 44000: |
| default: |
| s5h1409_writereg(state, 0x87, 0x01be); |
| s5h1409_writereg(state, 0x88, 0x0436); |
| s5h1409_writereg(state, 0x89, 0x054d); |
| break; |
| } |
| state->if_freq = KHz; |
| |
| return 0; |
| } |
| |
| static int s5h1409_set_spectralinversion(struct dvb_frontend *fe, int inverted) |
| { |
| struct s5h1409_state *state = fe->demodulator_priv; |
| |
| dprintk("%s(%d)\n", __func__, inverted); |
| |
| if (inverted == 1) |
| return s5h1409_writereg(state, 0x1b, 0x1101); /* Inverted */ |
| else |
| return s5h1409_writereg(state, 0x1b, 0x0110); /* Normal */ |
| } |
| |
| static int s5h1409_enable_modulation(struct dvb_frontend *fe, |
| enum fe_modulation m) |
| { |
| struct s5h1409_state *state = fe->demodulator_priv; |
| |
| dprintk("%s(0x%08x)\n", __func__, m); |
| |
| switch (m) { |
| case VSB_8: |
| dprintk("%s() VSB_8\n", __func__); |
| if (state->if_freq != S5H1409_VSB_IF_FREQ) |
| s5h1409_set_if_freq(fe, S5H1409_VSB_IF_FREQ); |
| s5h1409_writereg(state, 0xf4, 0); |
| break; |
| case QAM_64: |
| case QAM_256: |
| case QAM_AUTO: |
| dprintk("%s() QAM_AUTO (64/256)\n", __func__); |
| if (state->if_freq != S5H1409_QAM_IF_FREQ) |
| s5h1409_set_if_freq(fe, S5H1409_QAM_IF_FREQ); |
| s5h1409_writereg(state, 0xf4, 1); |
| s5h1409_writereg(state, 0x85, 0x110); |
| break; |
| default: |
| dprintk("%s() Invalid modulation\n", __func__); |
| return -EINVAL; |
| } |
| |
| state->current_modulation = m; |
| s5h1409_softreset(fe); |
| |
| return 0; |
| } |
| |
| static int s5h1409_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) |
| { |
| struct s5h1409_state *state = fe->demodulator_priv; |
| |
| dprintk("%s(%d)\n", __func__, enable); |
| |
| if (enable) |
| return s5h1409_writereg(state, 0xf3, 1); |
| else |
| return s5h1409_writereg(state, 0xf3, 0); |
| } |
| |
| static int s5h1409_set_gpio(struct dvb_frontend *fe, int enable) |
| { |
| struct s5h1409_state *state = fe->demodulator_priv; |
| |
| dprintk("%s(%d)\n", __func__, enable); |
| |
| if (enable) |
| return s5h1409_writereg(state, 0xe3, |
| s5h1409_readreg(state, 0xe3) | 0x1100); |
| else |
| return s5h1409_writereg(state, 0xe3, |
| s5h1409_readreg(state, 0xe3) & 0xfeff); |
| } |
| |
| static int s5h1409_sleep(struct dvb_frontend *fe, int enable) |
| { |
| struct s5h1409_state *state = fe->demodulator_priv; |
| |
| dprintk("%s(%d)\n", __func__, enable); |
| |
| return s5h1409_writereg(state, 0xf2, enable); |
| } |
| |
| static int s5h1409_register_reset(struct dvb_frontend *fe) |
| { |
| struct s5h1409_state *state = fe->demodulator_priv; |
| |
| dprintk("%s()\n", __func__); |
| |
| return s5h1409_writereg(state, 0xfa, 0); |
| } |
| |
| static void s5h1409_set_qam_amhum_mode(struct dvb_frontend *fe) |
| { |
| struct s5h1409_state *state = fe->demodulator_priv; |
| u16 reg; |
| |
| if (state->qam_state < QAM_STATE_INTERLEAVE_SET) { |
| /* We should not perform amhum optimization until |
| the interleave mode has been configured */ |
| return; |
| } |
| |
| if (state->qam_state == QAM_STATE_QAM_OPTIMIZED_L3) { |
| /* We've already reached the maximum optimization level, so |
| dont bother banging on the status registers */ |
| return; |
| } |
| |
| /* QAM EQ lock check */ |
| reg = s5h1409_readreg(state, 0xf0); |
| |
| if ((reg >> 13) & 0x1) { |
| reg &= 0xff; |
| |
| s5h1409_writereg(state, 0x96, 0x000c); |
| if (reg < 0x68) { |
| if (state->qam_state < QAM_STATE_QAM_OPTIMIZED_L3) { |
| dprintk("%s() setting QAM state to OPT_L3\n", |
| __func__); |
| s5h1409_writereg(state, 0x93, 0x3130); |
| s5h1409_writereg(state, 0x9e, 0x2836); |
| state->qam_state = QAM_STATE_QAM_OPTIMIZED_L3; |
| } |
| } else { |
| if (state->qam_state < QAM_STATE_QAM_OPTIMIZED_L2) { |
| dprintk("%s() setting QAM state to OPT_L2\n", |
| __func__); |
| s5h1409_writereg(state, 0x93, 0x3332); |
| s5h1409_writereg(state, 0x9e, 0x2c37); |
| state->qam_state = QAM_STATE_QAM_OPTIMIZED_L2; |
| } |
| } |
| |
| } else { |
| if (state->qam_state < QAM_STATE_QAM_OPTIMIZED_L1) { |
| dprintk("%s() setting QAM state to OPT_L1\n", __func__); |
| s5h1409_writereg(state, 0x96, 0x0008); |
| s5h1409_writereg(state, 0x93, 0x3332); |
| s5h1409_writereg(state, 0x9e, 0x2c37); |
| state->qam_state = QAM_STATE_QAM_OPTIMIZED_L1; |
| } |
| } |
| } |
| |
| static void s5h1409_set_qam_amhum_mode_legacy(struct dvb_frontend *fe) |
| { |
| struct s5h1409_state *state = fe->demodulator_priv; |
| u16 reg; |
| |
| if (state->is_qam_locked) |
| return; |
| |
| /* QAM EQ lock check */ |
| reg = s5h1409_readreg(state, 0xf0); |
| |
| if ((reg >> 13) & 0x1) { |
| |
| state->is_qam_locked = 1; |
| reg &= 0xff; |
| |
| s5h1409_writereg(state, 0x96, 0x00c); |
| if ((reg < 0x38) || (reg > 0x68)) { |
| s5h1409_writereg(state, 0x93, 0x3332); |
| s5h1409_writereg(state, 0x9e, 0x2c37); |
| } else { |
| s5h1409_writereg(state, 0x93, 0x3130); |
| s5h1409_writereg(state, 0x9e, 0x2836); |
| } |
| |
| } else { |
| s5h1409_writereg(state, 0x96, 0x0008); |
| s5h1409_writereg(state, 0x93, 0x3332); |
| s5h1409_writereg(state, 0x9e, 0x2c37); |
| } |
| } |
| |
| static void s5h1409_set_qam_interleave_mode(struct dvb_frontend *fe) |
| { |
| struct s5h1409_state *state = fe->demodulator_priv; |
| u16 reg, reg1, reg2; |
| |
| if (state->qam_state >= QAM_STATE_INTERLEAVE_SET) { |
| /* We've done the optimization already */ |
| return; |
| } |
| |
| reg = s5h1409_readreg(state, 0xf1); |
| |
| /* Master lock */ |
| if ((reg >> 15) & 0x1) { |
| if (state->qam_state == QAM_STATE_UNTUNED || |
| state->qam_state == QAM_STATE_TUNING_STARTED) { |
| dprintk("%s() setting QAM state to INTERLEAVE_SET\n", |
| __func__); |
| reg1 = s5h1409_readreg(state, 0xb2); |
| reg2 = s5h1409_readreg(state, 0xad); |
| |
| s5h1409_writereg(state, 0x96, 0x0020); |
| s5h1409_writereg(state, 0xad, |
| (((reg1 & 0xf000) >> 4) | (reg2 & 0xf0ff))); |
| state->qam_state = QAM_STATE_INTERLEAVE_SET; |
| } |
| } else { |
| if (state->qam_state == QAM_STATE_UNTUNED) { |
| dprintk("%s() setting QAM state to TUNING_STARTED\n", |
| __func__); |
| s5h1409_writereg(state, 0x96, 0x08); |
| s5h1409_writereg(state, 0xab, |
| s5h1409_readreg(state, 0xab) | 0x1001); |
| state->qam_state = QAM_STATE_TUNING_STARTED; |
| } |
| } |
| } |
| |
| static void s5h1409_set_qam_interleave_mode_legacy(struct dvb_frontend *fe) |
| { |
| struct s5h1409_state *state = fe->demodulator_priv; |
| u16 reg, reg1, reg2; |
| |
| reg = s5h1409_readreg(state, 0xf1); |
| |
| /* Master lock */ |
| if ((reg >> 15) & 0x1) { |
| if (state->qam_state != 2) { |
| state->qam_state = 2; |
| reg1 = s5h1409_readreg(state, 0xb2); |
| reg2 = s5h1409_readreg(state, 0xad); |
| |
| s5h1409_writereg(state, 0x96, 0x20); |
| s5h1409_writereg(state, 0xad, |
| (((reg1 & 0xf000) >> 4) | (reg2 & 0xf0ff))); |
| s5h1409_writereg(state, 0xab, |
| s5h1409_readreg(state, 0xab) & 0xeffe); |
| } |
| } else { |
| if (state->qam_state != 1) { |
| state->qam_state = 1; |
| s5h1409_writereg(state, 0x96, 0x08); |
| s5h1409_writereg(state, 0xab, |
| s5h1409_readreg(state, 0xab) | 0x1001); |
| } |
| } |
| } |
| |
| /* Talk to the demod, set the FEC, GUARD, QAM settings etc */ |
| static int s5h1409_set_frontend(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| struct s5h1409_state *state = fe->demodulator_priv; |
| |
| dprintk("%s(frequency=%d)\n", __func__, p->frequency); |
| |
| s5h1409_softreset(fe); |
| |
| state->current_frequency = p->frequency; |
| |
| s5h1409_enable_modulation(fe, p->modulation); |
| |
| if (fe->ops.tuner_ops.set_params) { |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| fe->ops.tuner_ops.set_params(fe); |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| } |
| |
| /* Issue a reset to the demod so it knows to resync against the |
| newly tuned frequency */ |
| s5h1409_softreset(fe); |
| |
| /* Optimize the demod for QAM */ |
| if (state->current_modulation != VSB_8) { |
| /* This almost certainly applies to all boards, but for now |
| only do it for the HVR-1600. Once the other boards are |
| tested, the "legacy" versions can just go away */ |
| if (state->config->hvr1600_opt == S5H1409_HVR1600_OPTIMIZE) { |
| s5h1409_set_qam_interleave_mode(fe); |
| s5h1409_set_qam_amhum_mode(fe); |
| } else { |
| s5h1409_set_qam_amhum_mode_legacy(fe); |
| s5h1409_set_qam_interleave_mode_legacy(fe); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int s5h1409_set_mpeg_timing(struct dvb_frontend *fe, int mode) |
| { |
| struct s5h1409_state *state = fe->demodulator_priv; |
| u16 val; |
| |
| dprintk("%s(%d)\n", __func__, mode); |
| |
| val = s5h1409_readreg(state, 0xac) & 0xcfff; |
| switch (mode) { |
| case S5H1409_MPEGTIMING_CONTINOUS_INVERTING_CLOCK: |
| val |= 0x0000; |
| break; |
| case S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK: |
| dprintk("%s(%d) Mode1 or Defaulting\n", __func__, mode); |
| val |= 0x1000; |
| break; |
| case S5H1409_MPEGTIMING_NONCONTINOUS_INVERTING_CLOCK: |
| val |= 0x2000; |
| break; |
| case S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK: |
| val |= 0x3000; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* Configure MPEG Signal Timing charactistics */ |
| return s5h1409_writereg(state, 0xac, val); |
| } |
| |
| /* Reset the demod hardware and reset all of the configuration registers |
| to a default state. */ |
| static int s5h1409_init(struct dvb_frontend *fe) |
| { |
| int i; |
| |
| struct s5h1409_state *state = fe->demodulator_priv; |
| dprintk("%s()\n", __func__); |
| |
| s5h1409_sleep(fe, 0); |
| s5h1409_register_reset(fe); |
| |
| for (i = 0; i < ARRAY_SIZE(init_tab); i++) |
| s5h1409_writereg(state, init_tab[i].reg, init_tab[i].data); |
| |
| /* The datasheet says that after initialisation, VSB is default */ |
| state->current_modulation = VSB_8; |
| |
| /* Optimize for the HVR-1600 if appropriate. Note that some of these |
| may get folded into the generic case after testing with other |
| devices */ |
| if (state->config->hvr1600_opt == S5H1409_HVR1600_OPTIMIZE) { |
| /* VSB AGC REF */ |
| s5h1409_writereg(state, 0x09, 0x0050); |
| |
| /* Unknown but Windows driver does it... */ |
| s5h1409_writereg(state, 0x21, 0x0001); |
| s5h1409_writereg(state, 0x50, 0x030e); |
| |
| /* QAM AGC REF */ |
| s5h1409_writereg(state, 0x82, 0x0800); |
| } |
| |
| if (state->config->output_mode == S5H1409_SERIAL_OUTPUT) |
| s5h1409_writereg(state, 0xab, |
| s5h1409_readreg(state, 0xab) | 0x100); /* Serial */ |
| else |
| s5h1409_writereg(state, 0xab, |
| s5h1409_readreg(state, 0xab) & 0xfeff); /* Parallel */ |
| |
| s5h1409_set_spectralinversion(fe, state->config->inversion); |
| s5h1409_set_if_freq(fe, state->if_freq); |
| s5h1409_set_gpio(fe, state->config->gpio); |
| s5h1409_set_mpeg_timing(fe, state->config->mpeg_timing); |
| s5h1409_softreset(fe); |
| |
| /* Note: Leaving the I2C gate closed. */ |
| s5h1409_i2c_gate_ctrl(fe, 0); |
| |
| return 0; |
| } |
| |
| static int s5h1409_read_status(struct dvb_frontend *fe, enum fe_status *status) |
| { |
| struct s5h1409_state *state = fe->demodulator_priv; |
| u16 reg; |
| u32 tuner_status = 0; |
| |
| *status = 0; |
| |
| /* Optimize the demod for QAM */ |
| if (state->current_modulation != VSB_8) { |
| /* This almost certainly applies to all boards, but for now |
| only do it for the HVR-1600. Once the other boards are |
| tested, the "legacy" versions can just go away */ |
| if (state->config->hvr1600_opt == S5H1409_HVR1600_OPTIMIZE) { |
| s5h1409_set_qam_interleave_mode(fe); |
| s5h1409_set_qam_amhum_mode(fe); |
| } |
| } |
| |
| /* Get the demodulator status */ |
| reg = s5h1409_readreg(state, 0xf1); |
| if (reg & 0x1000) |
| *status |= FE_HAS_VITERBI; |
| if (reg & 0x8000) |
| *status |= FE_HAS_LOCK | FE_HAS_SYNC; |
| |
| switch (state->config->status_mode) { |
| case S5H1409_DEMODLOCKING: |
| if (*status & FE_HAS_VITERBI) |
| *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; |
| break; |
| case S5H1409_TUNERLOCKING: |
| /* Get the tuner status */ |
| if (fe->ops.tuner_ops.get_status) { |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| |
| fe->ops.tuner_ops.get_status(fe, &tuner_status); |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| } |
| if (tuner_status) |
| *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; |
| break; |
| } |
| |
| dprintk("%s() status 0x%08x\n", __func__, *status); |
| |
| return 0; |
| } |
| |
| static int s5h1409_qam256_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v) |
| { |
| int i, ret = -EINVAL; |
| dprintk("%s()\n", __func__); |
| |
| for (i = 0; i < ARRAY_SIZE(qam256_snr_tab); i++) { |
| if (v < qam256_snr_tab[i].val) { |
| *snr = qam256_snr_tab[i].data; |
| ret = 0; |
| break; |
| } |
| } |
| return ret; |
| } |
| |
| static int s5h1409_qam64_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v) |
| { |
| int i, ret = -EINVAL; |
| dprintk("%s()\n", __func__); |
| |
| for (i = 0; i < ARRAY_SIZE(qam64_snr_tab); i++) { |
| if (v < qam64_snr_tab[i].val) { |
| *snr = qam64_snr_tab[i].data; |
| ret = 0; |
| break; |
| } |
| } |
| return ret; |
| } |
| |
| static int s5h1409_vsb_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v) |
| { |
| int i, ret = -EINVAL; |
| dprintk("%s()\n", __func__); |
| |
| for (i = 0; i < ARRAY_SIZE(vsb_snr_tab); i++) { |
| if (v > vsb_snr_tab[i].val) { |
| *snr = vsb_snr_tab[i].data; |
| ret = 0; |
| break; |
| } |
| } |
| dprintk("%s() snr=%d\n", __func__, *snr); |
| return ret; |
| } |
| |
| static int s5h1409_read_snr(struct dvb_frontend *fe, u16 *snr) |
| { |
| struct s5h1409_state *state = fe->demodulator_priv; |
| u16 reg; |
| dprintk("%s()\n", __func__); |
| |
| switch (state->current_modulation) { |
| case QAM_64: |
| reg = s5h1409_readreg(state, 0xf0) & 0xff; |
| return s5h1409_qam64_lookup_snr(fe, snr, reg); |
| case QAM_256: |
| reg = s5h1409_readreg(state, 0xf0) & 0xff; |
| return s5h1409_qam256_lookup_snr(fe, snr, reg); |
| case VSB_8: |
| reg = s5h1409_readreg(state, 0xf1) & 0x3ff; |
| return s5h1409_vsb_lookup_snr(fe, snr, reg); |
| default: |
| break; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int s5h1409_read_signal_strength(struct dvb_frontend *fe, |
| u16 *signal_strength) |
| { |
| /* borrowed from lgdt330x.c |
| * |
| * Calculate strength from SNR up to 35dB |
| * Even though the SNR can go higher than 35dB, |
| * there is some comfort factor in having a range of |
| * strong signals that can show at 100% |
| */ |
| u16 snr; |
| u32 tmp; |
| int ret = s5h1409_read_snr(fe, &snr); |
| |
| *signal_strength = 0; |
| |
| if (0 == ret) { |
| /* The following calculation method was chosen |
| * purely for the sake of code re-use from the |
| * other demod drivers that use this method */ |
| |
| /* Convert from SNR in dB * 10 to 8.24 fixed-point */ |
| tmp = (snr * ((1 << 24) / 10)); |
| |
| /* Convert from 8.24 fixed-point to |
| * scale the range 0 - 35*2^24 into 0 - 65535*/ |
| if (tmp >= 8960 * 0x10000) |
| *signal_strength = 0xffff; |
| else |
| *signal_strength = tmp / 8960; |
| } |
| |
| return ret; |
| } |
| |
| static int s5h1409_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) |
| { |
| struct s5h1409_state *state = fe->demodulator_priv; |
| |
| *ucblocks = s5h1409_readreg(state, 0xb5); |
| |
| return 0; |
| } |
| |
| static int s5h1409_read_ber(struct dvb_frontend *fe, u32 *ber) |
| { |
| return s5h1409_read_ucblocks(fe, ber); |
| } |
| |
| static int s5h1409_get_frontend(struct dvb_frontend *fe, |
| struct dtv_frontend_properties *p) |
| { |
| struct s5h1409_state *state = fe->demodulator_priv; |
| |
| p->frequency = state->current_frequency; |
| p->modulation = state->current_modulation; |
| |
| return 0; |
| } |
| |
| static int s5h1409_get_tune_settings(struct dvb_frontend *fe, |
| struct dvb_frontend_tune_settings *tune) |
| { |
| tune->min_delay_ms = 1000; |
| return 0; |
| } |
| |
| static void s5h1409_release(struct dvb_frontend *fe) |
| { |
| struct s5h1409_state *state = fe->demodulator_priv; |
| kfree(state); |
| } |
| |
| static struct dvb_frontend_ops s5h1409_ops; |
| |
| struct dvb_frontend *s5h1409_attach(const struct s5h1409_config *config, |
| struct i2c_adapter *i2c) |
| { |
| struct s5h1409_state *state = NULL; |
| u16 reg; |
| |
| /* allocate memory for the internal state */ |
| state = kzalloc(sizeof(struct s5h1409_state), GFP_KERNEL); |
| if (state == NULL) |
| goto error; |
| |
| /* setup the state */ |
| state->config = config; |
| state->i2c = i2c; |
| state->current_modulation = 0; |
| state->if_freq = S5H1409_VSB_IF_FREQ; |
| |
| /* check if the demod exists */ |
| reg = s5h1409_readreg(state, 0x04); |
| if ((reg != 0x0066) && (reg != 0x007f)) |
| goto error; |
| |
| /* create dvb_frontend */ |
| memcpy(&state->frontend.ops, &s5h1409_ops, |
| sizeof(struct dvb_frontend_ops)); |
| state->frontend.demodulator_priv = state; |
| |
| if (s5h1409_init(&state->frontend) != 0) { |
| printk(KERN_ERR "%s: Failed to initialize correctly\n", |
| __func__); |
| goto error; |
| } |
| |
| /* Note: Leaving the I2C gate open here. */ |
| s5h1409_i2c_gate_ctrl(&state->frontend, 1); |
| |
| return &state->frontend; |
| |
| error: |
| kfree(state); |
| return NULL; |
| } |
| EXPORT_SYMBOL(s5h1409_attach); |
| |
| static struct dvb_frontend_ops s5h1409_ops = { |
| .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B }, |
| .info = { |
| .name = "Samsung S5H1409 QAM/8VSB Frontend", |
| .frequency_min = 54000000, |
| .frequency_max = 858000000, |
| .frequency_stepsize = 62500, |
| .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB |
| }, |
| |
| .init = s5h1409_init, |
| .i2c_gate_ctrl = s5h1409_i2c_gate_ctrl, |
| .set_frontend = s5h1409_set_frontend, |
| .get_frontend = s5h1409_get_frontend, |
| .get_tune_settings = s5h1409_get_tune_settings, |
| .read_status = s5h1409_read_status, |
| .read_ber = s5h1409_read_ber, |
| .read_signal_strength = s5h1409_read_signal_strength, |
| .read_snr = s5h1409_read_snr, |
| .read_ucblocks = s5h1409_read_ucblocks, |
| .release = s5h1409_release, |
| }; |
| |
| MODULE_DESCRIPTION("Samsung S5H1409 QAM-B/ATSC Demodulator driver"); |
| MODULE_AUTHOR("Steven Toth"); |
| MODULE_LICENSE("GPL"); |