| /* |
| * Copyright (C) 2012 Russell King |
| * Rewritten from the dovefb driver, and Armada510 manuals. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/clk.h> |
| #include <linux/component.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <drm/drmP.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_plane_helper.h> |
| #include "armada_crtc.h" |
| #include "armada_drm.h" |
| #include "armada_fb.h" |
| #include "armada_gem.h" |
| #include "armada_hw.h" |
| |
| struct armada_frame_work { |
| struct armada_plane_work work; |
| struct drm_pending_vblank_event *event; |
| struct armada_regs regs[4]; |
| struct drm_framebuffer *old_fb; |
| }; |
| |
| enum csc_mode { |
| CSC_AUTO = 0, |
| CSC_YUV_CCIR601 = 1, |
| CSC_YUV_CCIR709 = 2, |
| CSC_RGB_COMPUTER = 1, |
| CSC_RGB_STUDIO = 2, |
| }; |
| |
| static const uint32_t armada_primary_formats[] = { |
| DRM_FORMAT_UYVY, |
| DRM_FORMAT_YUYV, |
| DRM_FORMAT_VYUY, |
| DRM_FORMAT_YVYU, |
| DRM_FORMAT_ARGB8888, |
| DRM_FORMAT_ABGR8888, |
| DRM_FORMAT_XRGB8888, |
| DRM_FORMAT_XBGR8888, |
| DRM_FORMAT_RGB888, |
| DRM_FORMAT_BGR888, |
| DRM_FORMAT_ARGB1555, |
| DRM_FORMAT_ABGR1555, |
| DRM_FORMAT_RGB565, |
| DRM_FORMAT_BGR565, |
| }; |
| |
| /* |
| * A note about interlacing. Let's consider HDMI 1920x1080i. |
| * The timing parameters we have from X are: |
| * Hact HsyA HsyI Htot Vact VsyA VsyI Vtot |
| * 1920 2448 2492 2640 1080 1084 1094 1125 |
| * Which get translated to: |
| * Hact HsyA HsyI Htot Vact VsyA VsyI Vtot |
| * 1920 2448 2492 2640 540 542 547 562 |
| * |
| * This is how it is defined by CEA-861-D - line and pixel numbers are |
| * referenced to the rising edge of VSYNC and HSYNC. Total clocks per |
| * line: 2640. The odd frame, the first active line is at line 21, and |
| * the even frame, the first active line is 584. |
| * |
| * LN: 560 561 562 563 567 568 569 |
| * DE: ~~~|____________________________//__________________________ |
| * HSYNC: ____|~|_____|~|_____|~|_____|~|_//__|~|_____|~|_____|~|_____ |
| * VSYNC: _________________________|~~~~~~//~~~~~~~~~~~~~~~|__________ |
| * 22 blanking lines. VSYNC at 1320 (referenced to the HSYNC rising edge). |
| * |
| * LN: 1123 1124 1125 1 5 6 7 |
| * DE: ~~~|____________________________//__________________________ |
| * HSYNC: ____|~|_____|~|_____|~|_____|~|_//__|~|_____|~|_____|~|_____ |
| * VSYNC: ____________________|~~~~~~~~~~~//~~~~~~~~~~|_______________ |
| * 23 blanking lines |
| * |
| * The Armada LCD Controller line and pixel numbers are, like X timings, |
| * referenced to the top left of the active frame. |
| * |
| * So, translating these to our LCD controller: |
| * Odd frame, 563 total lines, VSYNC at line 543-548, pixel 1128. |
| * Even frame, 562 total lines, VSYNC at line 542-547, pixel 2448. |
| * Note: Vsync front porch remains constant! |
| * |
| * if (odd_frame) { |
| * vtotal = mode->crtc_vtotal + 1; |
| * vbackporch = mode->crtc_vsync_start - mode->crtc_vdisplay + 1; |
| * vhorizpos = mode->crtc_hsync_start - mode->crtc_htotal / 2 |
| * } else { |
| * vtotal = mode->crtc_vtotal; |
| * vbackporch = mode->crtc_vsync_start - mode->crtc_vdisplay; |
| * vhorizpos = mode->crtc_hsync_start; |
| * } |
| * vfrontporch = mode->crtc_vtotal - mode->crtc_vsync_end; |
| * |
| * So, we need to reprogram these registers on each vsync event: |
| * LCD_SPU_V_PORCH, LCD_SPU_ADV_REG, LCD_SPUT_V_H_TOTAL |
| * |
| * Note: we do not use the frame done interrupts because these appear |
| * to happen too early, and lead to jitter on the display (presumably |
| * they occur at the end of the last active line, before the vsync back |
| * porch, which we're reprogramming.) |
| */ |
| |
| void |
| armada_drm_crtc_update_regs(struct armada_crtc *dcrtc, struct armada_regs *regs) |
| { |
| while (regs->offset != ~0) { |
| void __iomem *reg = dcrtc->base + regs->offset; |
| uint32_t val; |
| |
| val = regs->mask; |
| if (val != 0) |
| val &= readl_relaxed(reg); |
| writel_relaxed(val | regs->val, reg); |
| ++regs; |
| } |
| } |
| |
| #define dpms_blanked(dpms) ((dpms) != DRM_MODE_DPMS_ON) |
| |
| static void armada_drm_crtc_update(struct armada_crtc *dcrtc) |
| { |
| uint32_t dumb_ctrl; |
| |
| dumb_ctrl = dcrtc->cfg_dumb_ctrl; |
| |
| if (!dpms_blanked(dcrtc->dpms)) |
| dumb_ctrl |= CFG_DUMB_ENA; |
| |
| /* |
| * When the dumb interface isn't in DUMB24_RGB888_0 mode, it might |
| * be using SPI or GPIO. If we set this to DUMB_BLANK, we will |
| * force LCD_D[23:0] to output blank color, overriding the GPIO or |
| * SPI usage. So leave it as-is unless in DUMB24_RGB888_0 mode. |
| */ |
| if (dpms_blanked(dcrtc->dpms) && |
| (dumb_ctrl & DUMB_MASK) == DUMB24_RGB888_0) { |
| dumb_ctrl &= ~DUMB_MASK; |
| dumb_ctrl |= DUMB_BLANK; |
| } |
| |
| /* |
| * The documentation doesn't indicate what the normal state of |
| * the sync signals are. Sebastian Hesselbart kindly probed |
| * these signals on his board to determine their state. |
| * |
| * The non-inverted state of the sync signals is active high. |
| * Setting these bits makes the appropriate signal active low. |
| */ |
| if (dcrtc->crtc.mode.flags & DRM_MODE_FLAG_NCSYNC) |
| dumb_ctrl |= CFG_INV_CSYNC; |
| if (dcrtc->crtc.mode.flags & DRM_MODE_FLAG_NHSYNC) |
| dumb_ctrl |= CFG_INV_HSYNC; |
| if (dcrtc->crtc.mode.flags & DRM_MODE_FLAG_NVSYNC) |
| dumb_ctrl |= CFG_INV_VSYNC; |
| |
| if (dcrtc->dumb_ctrl != dumb_ctrl) { |
| dcrtc->dumb_ctrl = dumb_ctrl; |
| writel_relaxed(dumb_ctrl, dcrtc->base + LCD_SPU_DUMB_CTRL); |
| } |
| } |
| |
| static unsigned armada_drm_crtc_calc_fb(struct drm_framebuffer *fb, |
| int x, int y, struct armada_regs *regs, bool interlaced) |
| { |
| struct armada_gem_object *obj = drm_fb_obj(fb); |
| unsigned pitch = fb->pitches[0]; |
| unsigned offset = y * pitch + x * fb->bits_per_pixel / 8; |
| uint32_t addr_odd, addr_even; |
| unsigned i = 0; |
| |
| DRM_DEBUG_DRIVER("pitch %u x %d y %d bpp %d\n", |
| pitch, x, y, fb->bits_per_pixel); |
| |
| addr_odd = addr_even = obj->dev_addr + offset; |
| |
| if (interlaced) { |
| addr_even += pitch; |
| pitch *= 2; |
| } |
| |
| /* write offset, base, and pitch */ |
| armada_reg_queue_set(regs, i, addr_odd, LCD_CFG_GRA_START_ADDR0); |
| armada_reg_queue_set(regs, i, addr_even, LCD_CFG_GRA_START_ADDR1); |
| armada_reg_queue_mod(regs, i, pitch, 0xffff, LCD_CFG_GRA_PITCH); |
| |
| return i; |
| } |
| |
| static void armada_drm_plane_work_run(struct armada_crtc *dcrtc, |
| struct armada_plane *plane) |
| { |
| struct armada_plane_work *work = xchg(&plane->work, NULL); |
| |
| /* Handle any pending frame work. */ |
| if (work) { |
| work->fn(dcrtc, plane, work); |
| drm_vblank_put(dcrtc->crtc.dev, dcrtc->num); |
| } |
| |
| wake_up(&plane->frame_wait); |
| } |
| |
| int armada_drm_plane_work_queue(struct armada_crtc *dcrtc, |
| struct armada_plane *plane, struct armada_plane_work *work) |
| { |
| int ret; |
| |
| ret = drm_vblank_get(dcrtc->crtc.dev, dcrtc->num); |
| if (ret) { |
| DRM_ERROR("failed to acquire vblank counter\n"); |
| return ret; |
| } |
| |
| ret = cmpxchg(&plane->work, NULL, work) ? -EBUSY : 0; |
| if (ret) |
| drm_vblank_put(dcrtc->crtc.dev, dcrtc->num); |
| |
| return ret; |
| } |
| |
| int armada_drm_plane_work_wait(struct armada_plane *plane, long timeout) |
| { |
| return wait_event_timeout(plane->frame_wait, !plane->work, timeout); |
| } |
| |
| struct armada_plane_work *armada_drm_plane_work_cancel( |
| struct armada_crtc *dcrtc, struct armada_plane *plane) |
| { |
| struct armada_plane_work *work = xchg(&plane->work, NULL); |
| |
| if (work) |
| drm_vblank_put(dcrtc->crtc.dev, dcrtc->num); |
| |
| return work; |
| } |
| |
| static int armada_drm_crtc_queue_frame_work(struct armada_crtc *dcrtc, |
| struct armada_frame_work *work) |
| { |
| struct armada_plane *plane = drm_to_armada_plane(dcrtc->crtc.primary); |
| |
| return armada_drm_plane_work_queue(dcrtc, plane, &work->work); |
| } |
| |
| static void armada_drm_crtc_complete_frame_work(struct armada_crtc *dcrtc, |
| struct armada_plane *plane, struct armada_plane_work *work) |
| { |
| struct armada_frame_work *fwork = container_of(work, struct armada_frame_work, work); |
| struct drm_device *dev = dcrtc->crtc.dev; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dcrtc->irq_lock, flags); |
| armada_drm_crtc_update_regs(dcrtc, fwork->regs); |
| spin_unlock_irqrestore(&dcrtc->irq_lock, flags); |
| |
| if (fwork->event) { |
| spin_lock_irqsave(&dev->event_lock, flags); |
| drm_send_vblank_event(dev, dcrtc->num, fwork->event); |
| spin_unlock_irqrestore(&dev->event_lock, flags); |
| } |
| |
| /* Finally, queue the process-half of the cleanup. */ |
| __armada_drm_queue_unref_work(dcrtc->crtc.dev, fwork->old_fb); |
| kfree(fwork); |
| } |
| |
| static void armada_drm_crtc_finish_fb(struct armada_crtc *dcrtc, |
| struct drm_framebuffer *fb, bool force) |
| { |
| struct armada_frame_work *work; |
| |
| if (!fb) |
| return; |
| |
| if (force) { |
| /* Display is disabled, so just drop the old fb */ |
| drm_framebuffer_unreference(fb); |
| return; |
| } |
| |
| work = kmalloc(sizeof(*work), GFP_KERNEL); |
| if (work) { |
| int i = 0; |
| work->work.fn = armada_drm_crtc_complete_frame_work; |
| work->event = NULL; |
| work->old_fb = fb; |
| armada_reg_queue_end(work->regs, i); |
| |
| if (armada_drm_crtc_queue_frame_work(dcrtc, work) == 0) |
| return; |
| |
| kfree(work); |
| } |
| |
| /* |
| * Oops - just drop the reference immediately and hope for |
| * the best. The worst that will happen is the buffer gets |
| * reused before it has finished being displayed. |
| */ |
| drm_framebuffer_unreference(fb); |
| } |
| |
| static void armada_drm_vblank_off(struct armada_crtc *dcrtc) |
| { |
| struct armada_plane *plane = drm_to_armada_plane(dcrtc->crtc.primary); |
| |
| /* |
| * Tell the DRM core that vblank IRQs aren't going to happen for |
| * a while. This cleans up any pending vblank events for us. |
| */ |
| drm_crtc_vblank_off(&dcrtc->crtc); |
| armada_drm_plane_work_run(dcrtc, plane); |
| } |
| |
| void armada_drm_crtc_gamma_set(struct drm_crtc *crtc, u16 r, u16 g, u16 b, |
| int idx) |
| { |
| } |
| |
| void armada_drm_crtc_gamma_get(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, |
| int idx) |
| { |
| } |
| |
| /* The mode_config.mutex will be held for this call */ |
| static void armada_drm_crtc_dpms(struct drm_crtc *crtc, int dpms) |
| { |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); |
| |
| if (dcrtc->dpms != dpms) { |
| dcrtc->dpms = dpms; |
| if (!IS_ERR(dcrtc->clk) && !dpms_blanked(dpms)) |
| WARN_ON(clk_prepare_enable(dcrtc->clk)); |
| armada_drm_crtc_update(dcrtc); |
| if (!IS_ERR(dcrtc->clk) && dpms_blanked(dpms)) |
| clk_disable_unprepare(dcrtc->clk); |
| if (dpms_blanked(dpms)) |
| armada_drm_vblank_off(dcrtc); |
| else |
| drm_crtc_vblank_on(&dcrtc->crtc); |
| } |
| } |
| |
| /* |
| * Prepare for a mode set. Turn off overlay to ensure that we don't end |
| * up with the overlay size being bigger than the active screen size. |
| * We rely upon X refreshing this state after the mode set has completed. |
| * |
| * The mode_config.mutex will be held for this call |
| */ |
| static void armada_drm_crtc_prepare(struct drm_crtc *crtc) |
| { |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); |
| struct drm_plane *plane; |
| |
| /* |
| * If we have an overlay plane associated with this CRTC, disable |
| * it before the modeset to avoid its coordinates being outside |
| * the new mode parameters. |
| */ |
| plane = dcrtc->plane; |
| if (plane) |
| drm_plane_force_disable(plane); |
| } |
| |
| /* The mode_config.mutex will be held for this call */ |
| static void armada_drm_crtc_commit(struct drm_crtc *crtc) |
| { |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); |
| |
| if (dcrtc->dpms != DRM_MODE_DPMS_ON) { |
| dcrtc->dpms = DRM_MODE_DPMS_ON; |
| armada_drm_crtc_update(dcrtc); |
| } |
| } |
| |
| /* The mode_config.mutex will be held for this call */ |
| static bool armada_drm_crtc_mode_fixup(struct drm_crtc *crtc, |
| const struct drm_display_mode *mode, struct drm_display_mode *adj) |
| { |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); |
| int ret; |
| |
| /* We can't do interlaced modes if we don't have the SPU_ADV_REG */ |
| if (!dcrtc->variant->has_spu_adv_reg && |
| adj->flags & DRM_MODE_FLAG_INTERLACE) |
| return false; |
| |
| /* Check whether the display mode is possible */ |
| ret = dcrtc->variant->compute_clock(dcrtc, adj, NULL); |
| if (ret) |
| return false; |
| |
| return true; |
| } |
| |
| static void armada_drm_crtc_irq(struct armada_crtc *dcrtc, u32 stat) |
| { |
| void __iomem *base = dcrtc->base; |
| struct drm_plane *ovl_plane; |
| |
| if (stat & DMA_FF_UNDERFLOW) |
| DRM_ERROR("video underflow on crtc %u\n", dcrtc->num); |
| if (stat & GRA_FF_UNDERFLOW) |
| DRM_ERROR("graphics underflow on crtc %u\n", dcrtc->num); |
| |
| if (stat & VSYNC_IRQ) |
| drm_handle_vblank(dcrtc->crtc.dev, dcrtc->num); |
| |
| spin_lock(&dcrtc->irq_lock); |
| ovl_plane = dcrtc->plane; |
| if (ovl_plane) { |
| struct armada_plane *plane = drm_to_armada_plane(ovl_plane); |
| armada_drm_plane_work_run(dcrtc, plane); |
| } |
| |
| if (stat & GRA_FRAME_IRQ && dcrtc->interlaced) { |
| int i = stat & GRA_FRAME_IRQ0 ? 0 : 1; |
| uint32_t val; |
| |
| writel_relaxed(dcrtc->v[i].spu_v_porch, base + LCD_SPU_V_PORCH); |
| writel_relaxed(dcrtc->v[i].spu_v_h_total, |
| base + LCD_SPUT_V_H_TOTAL); |
| |
| val = readl_relaxed(base + LCD_SPU_ADV_REG); |
| val &= ~(ADV_VSYNC_L_OFF | ADV_VSYNC_H_OFF | ADV_VSYNCOFFEN); |
| val |= dcrtc->v[i].spu_adv_reg; |
| writel_relaxed(val, base + LCD_SPU_ADV_REG); |
| } |
| |
| if (stat & DUMB_FRAMEDONE && dcrtc->cursor_update) { |
| writel_relaxed(dcrtc->cursor_hw_pos, |
| base + LCD_SPU_HWC_OVSA_HPXL_VLN); |
| writel_relaxed(dcrtc->cursor_hw_sz, |
| base + LCD_SPU_HWC_HPXL_VLN); |
| armada_updatel(CFG_HWC_ENA, |
| CFG_HWC_ENA | CFG_HWC_1BITMOD | CFG_HWC_1BITENA, |
| base + LCD_SPU_DMA_CTRL0); |
| dcrtc->cursor_update = false; |
| armada_drm_crtc_disable_irq(dcrtc, DUMB_FRAMEDONE_ENA); |
| } |
| |
| spin_unlock(&dcrtc->irq_lock); |
| |
| if (stat & GRA_FRAME_IRQ) { |
| struct armada_plane *plane = drm_to_armada_plane(dcrtc->crtc.primary); |
| armada_drm_plane_work_run(dcrtc, plane); |
| } |
| } |
| |
| static irqreturn_t armada_drm_irq(int irq, void *arg) |
| { |
| struct armada_crtc *dcrtc = arg; |
| u32 v, stat = readl_relaxed(dcrtc->base + LCD_SPU_IRQ_ISR); |
| |
| /* |
| * This is rediculous - rather than writing bits to clear, we |
| * have to set the actual status register value. This is racy. |
| */ |
| writel_relaxed(0, dcrtc->base + LCD_SPU_IRQ_ISR); |
| |
| /* Mask out those interrupts we haven't enabled */ |
| v = stat & dcrtc->irq_ena; |
| |
| if (v & (VSYNC_IRQ|GRA_FRAME_IRQ|DUMB_FRAMEDONE)) { |
| armada_drm_crtc_irq(dcrtc, stat); |
| return IRQ_HANDLED; |
| } |
| return IRQ_NONE; |
| } |
| |
| /* These are locked by dev->vbl_lock */ |
| void armada_drm_crtc_disable_irq(struct armada_crtc *dcrtc, u32 mask) |
| { |
| if (dcrtc->irq_ena & mask) { |
| dcrtc->irq_ena &= ~mask; |
| writel(dcrtc->irq_ena, dcrtc->base + LCD_SPU_IRQ_ENA); |
| } |
| } |
| |
| void armada_drm_crtc_enable_irq(struct armada_crtc *dcrtc, u32 mask) |
| { |
| if ((dcrtc->irq_ena & mask) != mask) { |
| dcrtc->irq_ena |= mask; |
| writel(dcrtc->irq_ena, dcrtc->base + LCD_SPU_IRQ_ENA); |
| if (readl_relaxed(dcrtc->base + LCD_SPU_IRQ_ISR) & mask) |
| writel(0, dcrtc->base + LCD_SPU_IRQ_ISR); |
| } |
| } |
| |
| static uint32_t armada_drm_crtc_calculate_csc(struct armada_crtc *dcrtc) |
| { |
| struct drm_display_mode *adj = &dcrtc->crtc.mode; |
| uint32_t val = 0; |
| |
| if (dcrtc->csc_yuv_mode == CSC_YUV_CCIR709) |
| val |= CFG_CSC_YUV_CCIR709; |
| if (dcrtc->csc_rgb_mode == CSC_RGB_STUDIO) |
| val |= CFG_CSC_RGB_STUDIO; |
| |
| /* |
| * In auto mode, set the colorimetry, based upon the HDMI spec. |
| * 1280x720p, 1920x1080p and 1920x1080i use ITU709, others use |
| * ITU601. It may be more appropriate to set this depending on |
| * the source - but what if the graphic frame is YUV and the |
| * video frame is RGB? |
| */ |
| if ((adj->hdisplay == 1280 && adj->vdisplay == 720 && |
| !(adj->flags & DRM_MODE_FLAG_INTERLACE)) || |
| (adj->hdisplay == 1920 && adj->vdisplay == 1080)) { |
| if (dcrtc->csc_yuv_mode == CSC_AUTO) |
| val |= CFG_CSC_YUV_CCIR709; |
| } |
| |
| /* |
| * We assume we're connected to a TV-like device, so the YUV->RGB |
| * conversion should produce a limited range. We should set this |
| * depending on the connectors attached to this CRTC, and what |
| * kind of device they report being connected. |
| */ |
| if (dcrtc->csc_rgb_mode == CSC_AUTO) |
| val |= CFG_CSC_RGB_STUDIO; |
| |
| return val; |
| } |
| |
| /* The mode_config.mutex will be held for this call */ |
| static int armada_drm_crtc_mode_set(struct drm_crtc *crtc, |
| struct drm_display_mode *mode, struct drm_display_mode *adj, |
| int x, int y, struct drm_framebuffer *old_fb) |
| { |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); |
| struct armada_regs regs[17]; |
| uint32_t lm, rm, tm, bm, val, sclk; |
| unsigned long flags; |
| unsigned i; |
| bool interlaced; |
| |
| drm_framebuffer_reference(crtc->primary->fb); |
| |
| interlaced = !!(adj->flags & DRM_MODE_FLAG_INTERLACE); |
| |
| i = armada_drm_crtc_calc_fb(dcrtc->crtc.primary->fb, |
| x, y, regs, interlaced); |
| |
| rm = adj->crtc_hsync_start - adj->crtc_hdisplay; |
| lm = adj->crtc_htotal - adj->crtc_hsync_end; |
| bm = adj->crtc_vsync_start - adj->crtc_vdisplay; |
| tm = adj->crtc_vtotal - adj->crtc_vsync_end; |
| |
| DRM_DEBUG_DRIVER("H: %d %d %d %d lm %d rm %d\n", |
| adj->crtc_hdisplay, |
| adj->crtc_hsync_start, |
| adj->crtc_hsync_end, |
| adj->crtc_htotal, lm, rm); |
| DRM_DEBUG_DRIVER("V: %d %d %d %d tm %d bm %d\n", |
| adj->crtc_vdisplay, |
| adj->crtc_vsync_start, |
| adj->crtc_vsync_end, |
| adj->crtc_vtotal, tm, bm); |
| |
| /* Wait for pending flips to complete */ |
| armada_drm_plane_work_wait(drm_to_armada_plane(dcrtc->crtc.primary), |
| MAX_SCHEDULE_TIMEOUT); |
| |
| drm_crtc_vblank_off(crtc); |
| |
| val = dcrtc->dumb_ctrl & ~CFG_DUMB_ENA; |
| if (val != dcrtc->dumb_ctrl) { |
| dcrtc->dumb_ctrl = val; |
| writel_relaxed(val, dcrtc->base + LCD_SPU_DUMB_CTRL); |
| } |
| |
| /* |
| * If we are blanked, we would have disabled the clock. Re-enable |
| * it so that compute_clock() does the right thing. |
| */ |
| if (!IS_ERR(dcrtc->clk) && dpms_blanked(dcrtc->dpms)) |
| WARN_ON(clk_prepare_enable(dcrtc->clk)); |
| |
| /* Now compute the divider for real */ |
| dcrtc->variant->compute_clock(dcrtc, adj, &sclk); |
| |
| /* Ensure graphic fifo is enabled */ |
| armada_reg_queue_mod(regs, i, 0, CFG_PDWN64x66, LCD_SPU_SRAM_PARA1); |
| armada_reg_queue_set(regs, i, sclk, LCD_CFG_SCLK_DIV); |
| |
| if (interlaced ^ dcrtc->interlaced) { |
| if (adj->flags & DRM_MODE_FLAG_INTERLACE) |
| drm_vblank_get(dcrtc->crtc.dev, dcrtc->num); |
| else |
| drm_vblank_put(dcrtc->crtc.dev, dcrtc->num); |
| dcrtc->interlaced = interlaced; |
| } |
| |
| spin_lock_irqsave(&dcrtc->irq_lock, flags); |
| |
| /* Even interlaced/progressive frame */ |
| dcrtc->v[1].spu_v_h_total = adj->crtc_vtotal << 16 | |
| adj->crtc_htotal; |
| dcrtc->v[1].spu_v_porch = tm << 16 | bm; |
| val = adj->crtc_hsync_start; |
| dcrtc->v[1].spu_adv_reg = val << 20 | val | ADV_VSYNCOFFEN | |
| dcrtc->variant->spu_adv_reg; |
| |
| if (interlaced) { |
| /* Odd interlaced frame */ |
| dcrtc->v[0].spu_v_h_total = dcrtc->v[1].spu_v_h_total + |
| (1 << 16); |
| dcrtc->v[0].spu_v_porch = dcrtc->v[1].spu_v_porch + 1; |
| val = adj->crtc_hsync_start - adj->crtc_htotal / 2; |
| dcrtc->v[0].spu_adv_reg = val << 20 | val | ADV_VSYNCOFFEN | |
| dcrtc->variant->spu_adv_reg; |
| } else { |
| dcrtc->v[0] = dcrtc->v[1]; |
| } |
| |
| val = adj->crtc_vdisplay << 16 | adj->crtc_hdisplay; |
| |
| armada_reg_queue_set(regs, i, val, LCD_SPU_V_H_ACTIVE); |
| armada_reg_queue_set(regs, i, val, LCD_SPU_GRA_HPXL_VLN); |
| armada_reg_queue_set(regs, i, val, LCD_SPU_GZM_HPXL_VLN); |
| armada_reg_queue_set(regs, i, (lm << 16) | rm, LCD_SPU_H_PORCH); |
| armada_reg_queue_set(regs, i, dcrtc->v[0].spu_v_porch, LCD_SPU_V_PORCH); |
| armada_reg_queue_set(regs, i, dcrtc->v[0].spu_v_h_total, |
| LCD_SPUT_V_H_TOTAL); |
| |
| if (dcrtc->variant->has_spu_adv_reg) { |
| armada_reg_queue_mod(regs, i, dcrtc->v[0].spu_adv_reg, |
| ADV_VSYNC_L_OFF | ADV_VSYNC_H_OFF | |
| ADV_VSYNCOFFEN, LCD_SPU_ADV_REG); |
| } |
| |
| val = CFG_GRA_ENA | CFG_GRA_HSMOOTH; |
| val |= CFG_GRA_FMT(drm_fb_to_armada_fb(dcrtc->crtc.primary->fb)->fmt); |
| val |= CFG_GRA_MOD(drm_fb_to_armada_fb(dcrtc->crtc.primary->fb)->mod); |
| |
| if (drm_fb_to_armada_fb(dcrtc->crtc.primary->fb)->fmt > CFG_420) |
| val |= CFG_PALETTE_ENA; |
| |
| if (interlaced) |
| val |= CFG_GRA_FTOGGLE; |
| |
| armada_reg_queue_mod(regs, i, val, CFG_GRAFORMAT | |
| CFG_GRA_MOD(CFG_SWAPRB | CFG_SWAPUV | |
| CFG_SWAPYU | CFG_YUV2RGB) | |
| CFG_PALETTE_ENA | CFG_GRA_FTOGGLE, |
| LCD_SPU_DMA_CTRL0); |
| |
| val = adj->flags & DRM_MODE_FLAG_NVSYNC ? CFG_VSYNC_INV : 0; |
| armada_reg_queue_mod(regs, i, val, CFG_VSYNC_INV, LCD_SPU_DMA_CTRL1); |
| |
| val = dcrtc->spu_iopad_ctrl | armada_drm_crtc_calculate_csc(dcrtc); |
| armada_reg_queue_set(regs, i, val, LCD_SPU_IOPAD_CONTROL); |
| armada_reg_queue_end(regs, i); |
| |
| armada_drm_crtc_update_regs(dcrtc, regs); |
| spin_unlock_irqrestore(&dcrtc->irq_lock, flags); |
| |
| armada_drm_crtc_update(dcrtc); |
| |
| drm_crtc_vblank_on(crtc); |
| armada_drm_crtc_finish_fb(dcrtc, old_fb, dpms_blanked(dcrtc->dpms)); |
| |
| return 0; |
| } |
| |
| /* The mode_config.mutex will be held for this call */ |
| static int armada_drm_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, |
| struct drm_framebuffer *old_fb) |
| { |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); |
| struct armada_regs regs[4]; |
| unsigned i; |
| |
| i = armada_drm_crtc_calc_fb(crtc->primary->fb, crtc->x, crtc->y, regs, |
| dcrtc->interlaced); |
| armada_reg_queue_end(regs, i); |
| |
| /* Wait for pending flips to complete */ |
| armada_drm_plane_work_wait(drm_to_armada_plane(dcrtc->crtc.primary), |
| MAX_SCHEDULE_TIMEOUT); |
| |
| /* Take a reference to the new fb as we're using it */ |
| drm_framebuffer_reference(crtc->primary->fb); |
| |
| /* Update the base in the CRTC */ |
| armada_drm_crtc_update_regs(dcrtc, regs); |
| |
| /* Drop our previously held reference */ |
| armada_drm_crtc_finish_fb(dcrtc, old_fb, dpms_blanked(dcrtc->dpms)); |
| |
| return 0; |
| } |
| |
| void armada_drm_crtc_plane_disable(struct armada_crtc *dcrtc, |
| struct drm_plane *plane) |
| { |
| u32 sram_para1, dma_ctrl0_mask; |
| |
| /* |
| * Drop our reference on any framebuffer attached to this plane. |
| * We don't need to NULL this out as drm_plane_force_disable(), |
| * and __setplane_internal() will do so for an overlay plane, and |
| * __drm_helper_disable_unused_functions() will do so for the |
| * primary plane. |
| */ |
| if (plane->fb) |
| drm_framebuffer_unreference(plane->fb); |
| |
| /* Power down the Y/U/V FIFOs */ |
| sram_para1 = CFG_PDWN16x66 | CFG_PDWN32x66; |
| |
| /* Power down most RAMs and FIFOs if this is the primary plane */ |
| if (plane->type == DRM_PLANE_TYPE_PRIMARY) { |
| sram_para1 |= CFG_PDWN256x32 | CFG_PDWN256x24 | CFG_PDWN256x8 | |
| CFG_PDWN32x32 | CFG_PDWN64x66; |
| dma_ctrl0_mask = CFG_GRA_ENA; |
| } else { |
| dma_ctrl0_mask = CFG_DMA_ENA; |
| } |
| |
| spin_lock_irq(&dcrtc->irq_lock); |
| armada_updatel(0, dma_ctrl0_mask, dcrtc->base + LCD_SPU_DMA_CTRL0); |
| spin_unlock_irq(&dcrtc->irq_lock); |
| |
| armada_updatel(sram_para1, 0, dcrtc->base + LCD_SPU_SRAM_PARA1); |
| } |
| |
| /* The mode_config.mutex will be held for this call */ |
| static void armada_drm_crtc_disable(struct drm_crtc *crtc) |
| { |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); |
| |
| armada_drm_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); |
| armada_drm_crtc_plane_disable(dcrtc, crtc->primary); |
| } |
| |
| static const struct drm_crtc_helper_funcs armada_crtc_helper_funcs = { |
| .dpms = armada_drm_crtc_dpms, |
| .prepare = armada_drm_crtc_prepare, |
| .commit = armada_drm_crtc_commit, |
| .mode_fixup = armada_drm_crtc_mode_fixup, |
| .mode_set = armada_drm_crtc_mode_set, |
| .mode_set_base = armada_drm_crtc_mode_set_base, |
| .disable = armada_drm_crtc_disable, |
| }; |
| |
| static void armada_load_cursor_argb(void __iomem *base, uint32_t *pix, |
| unsigned stride, unsigned width, unsigned height) |
| { |
| uint32_t addr; |
| unsigned y; |
| |
| addr = SRAM_HWC32_RAM1; |
| for (y = 0; y < height; y++) { |
| uint32_t *p = &pix[y * stride]; |
| unsigned x; |
| |
| for (x = 0; x < width; x++, p++) { |
| uint32_t val = *p; |
| |
| val = (val & 0xff00ff00) | |
| (val & 0x000000ff) << 16 | |
| (val & 0x00ff0000) >> 16; |
| |
| writel_relaxed(val, |
| base + LCD_SPU_SRAM_WRDAT); |
| writel_relaxed(addr | SRAM_WRITE, |
| base + LCD_SPU_SRAM_CTRL); |
| readl_relaxed(base + LCD_SPU_HWC_OVSA_HPXL_VLN); |
| addr += 1; |
| if ((addr & 0x00ff) == 0) |
| addr += 0xf00; |
| if ((addr & 0x30ff) == 0) |
| addr = SRAM_HWC32_RAM2; |
| } |
| } |
| } |
| |
| static void armada_drm_crtc_cursor_tran(void __iomem *base) |
| { |
| unsigned addr; |
| |
| for (addr = 0; addr < 256; addr++) { |
| /* write the default value */ |
| writel_relaxed(0x55555555, base + LCD_SPU_SRAM_WRDAT); |
| writel_relaxed(addr | SRAM_WRITE | SRAM_HWC32_TRAN, |
| base + LCD_SPU_SRAM_CTRL); |
| } |
| } |
| |
| static int armada_drm_crtc_cursor_update(struct armada_crtc *dcrtc, bool reload) |
| { |
| uint32_t xoff, xscr, w = dcrtc->cursor_w, s; |
| uint32_t yoff, yscr, h = dcrtc->cursor_h; |
| uint32_t para1; |
| |
| /* |
| * Calculate the visible width and height of the cursor, |
| * screen position, and the position in the cursor bitmap. |
| */ |
| if (dcrtc->cursor_x < 0) { |
| xoff = -dcrtc->cursor_x; |
| xscr = 0; |
| w -= min(xoff, w); |
| } else if (dcrtc->cursor_x + w > dcrtc->crtc.mode.hdisplay) { |
| xoff = 0; |
| xscr = dcrtc->cursor_x; |
| w = max_t(int, dcrtc->crtc.mode.hdisplay - dcrtc->cursor_x, 0); |
| } else { |
| xoff = 0; |
| xscr = dcrtc->cursor_x; |
| } |
| |
| if (dcrtc->cursor_y < 0) { |
| yoff = -dcrtc->cursor_y; |
| yscr = 0; |
| h -= min(yoff, h); |
| } else if (dcrtc->cursor_y + h > dcrtc->crtc.mode.vdisplay) { |
| yoff = 0; |
| yscr = dcrtc->cursor_y; |
| h = max_t(int, dcrtc->crtc.mode.vdisplay - dcrtc->cursor_y, 0); |
| } else { |
| yoff = 0; |
| yscr = dcrtc->cursor_y; |
| } |
| |
| /* On interlaced modes, the vertical cursor size must be halved */ |
| s = dcrtc->cursor_w; |
| if (dcrtc->interlaced) { |
| s *= 2; |
| yscr /= 2; |
| h /= 2; |
| } |
| |
| if (!dcrtc->cursor_obj || !h || !w) { |
| spin_lock_irq(&dcrtc->irq_lock); |
| armada_drm_crtc_disable_irq(dcrtc, DUMB_FRAMEDONE_ENA); |
| dcrtc->cursor_update = false; |
| armada_updatel(0, CFG_HWC_ENA, dcrtc->base + LCD_SPU_DMA_CTRL0); |
| spin_unlock_irq(&dcrtc->irq_lock); |
| return 0; |
| } |
| |
| para1 = readl_relaxed(dcrtc->base + LCD_SPU_SRAM_PARA1); |
| armada_updatel(CFG_CSB_256x32, CFG_CSB_256x32 | CFG_PDWN256x32, |
| dcrtc->base + LCD_SPU_SRAM_PARA1); |
| |
| /* |
| * Initialize the transparency if the SRAM was powered down. |
| * We must also reload the cursor data as well. |
| */ |
| if (!(para1 & CFG_CSB_256x32)) { |
| armada_drm_crtc_cursor_tran(dcrtc->base); |
| reload = true; |
| } |
| |
| if (dcrtc->cursor_hw_sz != (h << 16 | w)) { |
| spin_lock_irq(&dcrtc->irq_lock); |
| armada_drm_crtc_disable_irq(dcrtc, DUMB_FRAMEDONE_ENA); |
| dcrtc->cursor_update = false; |
| armada_updatel(0, CFG_HWC_ENA, dcrtc->base + LCD_SPU_DMA_CTRL0); |
| spin_unlock_irq(&dcrtc->irq_lock); |
| reload = true; |
| } |
| if (reload) { |
| struct armada_gem_object *obj = dcrtc->cursor_obj; |
| uint32_t *pix; |
| /* Set the top-left corner of the cursor image */ |
| pix = obj->addr; |
| pix += yoff * s + xoff; |
| armada_load_cursor_argb(dcrtc->base, pix, s, w, h); |
| } |
| |
| /* Reload the cursor position, size and enable in the IRQ handler */ |
| spin_lock_irq(&dcrtc->irq_lock); |
| dcrtc->cursor_hw_pos = yscr << 16 | xscr; |
| dcrtc->cursor_hw_sz = h << 16 | w; |
| dcrtc->cursor_update = true; |
| armada_drm_crtc_enable_irq(dcrtc, DUMB_FRAMEDONE_ENA); |
| spin_unlock_irq(&dcrtc->irq_lock); |
| |
| return 0; |
| } |
| |
| static void cursor_update(void *data) |
| { |
| armada_drm_crtc_cursor_update(data, true); |
| } |
| |
| static int armada_drm_crtc_cursor_set(struct drm_crtc *crtc, |
| struct drm_file *file, uint32_t handle, uint32_t w, uint32_t h) |
| { |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); |
| struct armada_gem_object *obj = NULL; |
| int ret; |
| |
| /* If no cursor support, replicate drm's return value */ |
| if (!dcrtc->variant->has_spu_adv_reg) |
| return -ENXIO; |
| |
| if (handle && w > 0 && h > 0) { |
| /* maximum size is 64x32 or 32x64 */ |
| if (w > 64 || h > 64 || (w > 32 && h > 32)) |
| return -ENOMEM; |
| |
| obj = armada_gem_object_lookup(file, handle); |
| if (!obj) |
| return -ENOENT; |
| |
| /* Must be a kernel-mapped object */ |
| if (!obj->addr) { |
| drm_gem_object_unreference_unlocked(&obj->obj); |
| return -EINVAL; |
| } |
| |
| if (obj->obj.size < w * h * 4) { |
| DRM_ERROR("buffer is too small\n"); |
| drm_gem_object_unreference_unlocked(&obj->obj); |
| return -ENOMEM; |
| } |
| } |
| |
| if (dcrtc->cursor_obj) { |
| dcrtc->cursor_obj->update = NULL; |
| dcrtc->cursor_obj->update_data = NULL; |
| drm_gem_object_unreference_unlocked(&dcrtc->cursor_obj->obj); |
| } |
| dcrtc->cursor_obj = obj; |
| dcrtc->cursor_w = w; |
| dcrtc->cursor_h = h; |
| ret = armada_drm_crtc_cursor_update(dcrtc, true); |
| if (obj) { |
| obj->update_data = dcrtc; |
| obj->update = cursor_update; |
| } |
| |
| return ret; |
| } |
| |
| static int armada_drm_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) |
| { |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); |
| int ret; |
| |
| /* If no cursor support, replicate drm's return value */ |
| if (!dcrtc->variant->has_spu_adv_reg) |
| return -EFAULT; |
| |
| dcrtc->cursor_x = x; |
| dcrtc->cursor_y = y; |
| ret = armada_drm_crtc_cursor_update(dcrtc, false); |
| |
| return ret; |
| } |
| |
| static void armada_drm_crtc_destroy(struct drm_crtc *crtc) |
| { |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); |
| struct armada_private *priv = crtc->dev->dev_private; |
| |
| if (dcrtc->cursor_obj) |
| drm_gem_object_unreference_unlocked(&dcrtc->cursor_obj->obj); |
| |
| priv->dcrtc[dcrtc->num] = NULL; |
| drm_crtc_cleanup(&dcrtc->crtc); |
| |
| if (!IS_ERR(dcrtc->clk)) |
| clk_disable_unprepare(dcrtc->clk); |
| |
| writel_relaxed(0, dcrtc->base + LCD_SPU_IRQ_ENA); |
| |
| of_node_put(dcrtc->crtc.port); |
| |
| kfree(dcrtc); |
| } |
| |
| /* |
| * The mode_config lock is held here, to prevent races between this |
| * and a mode_set. |
| */ |
| static int armada_drm_crtc_page_flip(struct drm_crtc *crtc, |
| struct drm_framebuffer *fb, struct drm_pending_vblank_event *event, uint32_t page_flip_flags) |
| { |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); |
| struct armada_frame_work *work; |
| unsigned i; |
| int ret; |
| |
| /* We don't support changing the pixel format */ |
| if (fb->pixel_format != crtc->primary->fb->pixel_format) |
| return -EINVAL; |
| |
| work = kmalloc(sizeof(*work), GFP_KERNEL); |
| if (!work) |
| return -ENOMEM; |
| |
| work->work.fn = armada_drm_crtc_complete_frame_work; |
| work->event = event; |
| work->old_fb = dcrtc->crtc.primary->fb; |
| |
| i = armada_drm_crtc_calc_fb(fb, crtc->x, crtc->y, work->regs, |
| dcrtc->interlaced); |
| armada_reg_queue_end(work->regs, i); |
| |
| /* |
| * Ensure that we hold a reference on the new framebuffer. |
| * This has to match the behaviour in mode_set. |
| */ |
| drm_framebuffer_reference(fb); |
| |
| ret = armada_drm_crtc_queue_frame_work(dcrtc, work); |
| if (ret) { |
| /* Undo our reference above */ |
| drm_framebuffer_unreference(fb); |
| kfree(work); |
| return ret; |
| } |
| |
| /* |
| * Don't take a reference on the new framebuffer; |
| * drm_mode_page_flip_ioctl() has already grabbed a reference and |
| * will _not_ drop that reference on successful return from this |
| * function. Simply mark this new framebuffer as the current one. |
| */ |
| dcrtc->crtc.primary->fb = fb; |
| |
| /* |
| * Finally, if the display is blanked, we won't receive an |
| * interrupt, so complete it now. |
| */ |
| if (dpms_blanked(dcrtc->dpms)) |
| armada_drm_plane_work_run(dcrtc, drm_to_armada_plane(dcrtc->crtc.primary)); |
| |
| return 0; |
| } |
| |
| static int |
| armada_drm_crtc_set_property(struct drm_crtc *crtc, |
| struct drm_property *property, uint64_t val) |
| { |
| struct armada_private *priv = crtc->dev->dev_private; |
| struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); |
| bool update_csc = false; |
| |
| if (property == priv->csc_yuv_prop) { |
| dcrtc->csc_yuv_mode = val; |
| update_csc = true; |
| } else if (property == priv->csc_rgb_prop) { |
| dcrtc->csc_rgb_mode = val; |
| update_csc = true; |
| } |
| |
| if (update_csc) { |
| uint32_t val; |
| |
| val = dcrtc->spu_iopad_ctrl | |
| armada_drm_crtc_calculate_csc(dcrtc); |
| writel_relaxed(val, dcrtc->base + LCD_SPU_IOPAD_CONTROL); |
| } |
| |
| return 0; |
| } |
| |
| static const struct drm_crtc_funcs armada_crtc_funcs = { |
| .cursor_set = armada_drm_crtc_cursor_set, |
| .cursor_move = armada_drm_crtc_cursor_move, |
| .destroy = armada_drm_crtc_destroy, |
| .set_config = drm_crtc_helper_set_config, |
| .page_flip = armada_drm_crtc_page_flip, |
| .set_property = armada_drm_crtc_set_property, |
| }; |
| |
| static const struct drm_plane_funcs armada_primary_plane_funcs = { |
| .update_plane = drm_primary_helper_update, |
| .disable_plane = drm_primary_helper_disable, |
| .destroy = drm_primary_helper_destroy, |
| }; |
| |
| int armada_drm_plane_init(struct armada_plane *plane) |
| { |
| init_waitqueue_head(&plane->frame_wait); |
| |
| return 0; |
| } |
| |
| static struct drm_prop_enum_list armada_drm_csc_yuv_enum_list[] = { |
| { CSC_AUTO, "Auto" }, |
| { CSC_YUV_CCIR601, "CCIR601" }, |
| { CSC_YUV_CCIR709, "CCIR709" }, |
| }; |
| |
| static struct drm_prop_enum_list armada_drm_csc_rgb_enum_list[] = { |
| { CSC_AUTO, "Auto" }, |
| { CSC_RGB_COMPUTER, "Computer system" }, |
| { CSC_RGB_STUDIO, "Studio" }, |
| }; |
| |
| static int armada_drm_crtc_create_properties(struct drm_device *dev) |
| { |
| struct armada_private *priv = dev->dev_private; |
| |
| if (priv->csc_yuv_prop) |
| return 0; |
| |
| priv->csc_yuv_prop = drm_property_create_enum(dev, 0, |
| "CSC_YUV", armada_drm_csc_yuv_enum_list, |
| ARRAY_SIZE(armada_drm_csc_yuv_enum_list)); |
| priv->csc_rgb_prop = drm_property_create_enum(dev, 0, |
| "CSC_RGB", armada_drm_csc_rgb_enum_list, |
| ARRAY_SIZE(armada_drm_csc_rgb_enum_list)); |
| |
| if (!priv->csc_yuv_prop || !priv->csc_rgb_prop) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| static int armada_drm_crtc_create(struct drm_device *drm, struct device *dev, |
| struct resource *res, int irq, const struct armada_variant *variant, |
| struct device_node *port) |
| { |
| struct armada_private *priv = drm->dev_private; |
| struct armada_crtc *dcrtc; |
| struct armada_plane *primary; |
| void __iomem *base; |
| int ret; |
| |
| ret = armada_drm_crtc_create_properties(drm); |
| if (ret) |
| return ret; |
| |
| base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| dcrtc = kzalloc(sizeof(*dcrtc), GFP_KERNEL); |
| if (!dcrtc) { |
| DRM_ERROR("failed to allocate Armada crtc\n"); |
| return -ENOMEM; |
| } |
| |
| if (dev != drm->dev) |
| dev_set_drvdata(dev, dcrtc); |
| |
| dcrtc->variant = variant; |
| dcrtc->base = base; |
| dcrtc->num = drm->mode_config.num_crtc; |
| dcrtc->clk = ERR_PTR(-EINVAL); |
| dcrtc->csc_yuv_mode = CSC_AUTO; |
| dcrtc->csc_rgb_mode = CSC_AUTO; |
| dcrtc->cfg_dumb_ctrl = DUMB24_RGB888_0; |
| dcrtc->spu_iopad_ctrl = CFG_VSCALE_LN_EN | CFG_IOPAD_DUMB24; |
| spin_lock_init(&dcrtc->irq_lock); |
| dcrtc->irq_ena = CLEAN_SPU_IRQ_ISR; |
| |
| /* Initialize some registers which we don't otherwise set */ |
| writel_relaxed(0x00000001, dcrtc->base + LCD_CFG_SCLK_DIV); |
| writel_relaxed(0x00000000, dcrtc->base + LCD_SPU_BLANKCOLOR); |
| writel_relaxed(dcrtc->spu_iopad_ctrl, |
| dcrtc->base + LCD_SPU_IOPAD_CONTROL); |
| writel_relaxed(0x00000000, dcrtc->base + LCD_SPU_SRAM_PARA0); |
| writel_relaxed(CFG_PDWN256x32 | CFG_PDWN256x24 | CFG_PDWN256x8 | |
| CFG_PDWN32x32 | CFG_PDWN16x66 | CFG_PDWN32x66 | |
| CFG_PDWN64x66, dcrtc->base + LCD_SPU_SRAM_PARA1); |
| writel_relaxed(0x2032ff81, dcrtc->base + LCD_SPU_DMA_CTRL1); |
| writel_relaxed(0x00000000, dcrtc->base + LCD_SPU_GRA_OVSA_HPXL_VLN); |
| writel_relaxed(dcrtc->irq_ena, dcrtc->base + LCD_SPU_IRQ_ENA); |
| writel_relaxed(0, dcrtc->base + LCD_SPU_IRQ_ISR); |
| |
| ret = devm_request_irq(dev, irq, armada_drm_irq, 0, "armada_drm_crtc", |
| dcrtc); |
| if (ret < 0) { |
| kfree(dcrtc); |
| return ret; |
| } |
| |
| if (dcrtc->variant->init) { |
| ret = dcrtc->variant->init(dcrtc, dev); |
| if (ret) { |
| kfree(dcrtc); |
| return ret; |
| } |
| } |
| |
| /* Ensure AXI pipeline is enabled */ |
| armada_updatel(CFG_ARBFAST_ENA, 0, dcrtc->base + LCD_SPU_DMA_CTRL0); |
| |
| priv->dcrtc[dcrtc->num] = dcrtc; |
| |
| dcrtc->crtc.port = port; |
| |
| primary = kzalloc(sizeof(*primary), GFP_KERNEL); |
| if (!primary) |
| return -ENOMEM; |
| |
| ret = armada_drm_plane_init(primary); |
| if (ret) { |
| kfree(primary); |
| return ret; |
| } |
| |
| ret = drm_universal_plane_init(drm, &primary->base, 0, |
| &armada_primary_plane_funcs, |
| armada_primary_formats, |
| ARRAY_SIZE(armada_primary_formats), |
| DRM_PLANE_TYPE_PRIMARY, NULL); |
| if (ret) { |
| kfree(primary); |
| return ret; |
| } |
| |
| ret = drm_crtc_init_with_planes(drm, &dcrtc->crtc, &primary->base, NULL, |
| &armada_crtc_funcs, NULL); |
| if (ret) |
| goto err_crtc_init; |
| |
| drm_crtc_helper_add(&dcrtc->crtc, &armada_crtc_helper_funcs); |
| |
| drm_object_attach_property(&dcrtc->crtc.base, priv->csc_yuv_prop, |
| dcrtc->csc_yuv_mode); |
| drm_object_attach_property(&dcrtc->crtc.base, priv->csc_rgb_prop, |
| dcrtc->csc_rgb_mode); |
| |
| return armada_overlay_plane_create(drm, 1 << dcrtc->num); |
| |
| err_crtc_init: |
| primary->base.funcs->destroy(&primary->base); |
| return ret; |
| } |
| |
| static int |
| armada_lcd_bind(struct device *dev, struct device *master, void *data) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct drm_device *drm = data; |
| struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| int irq = platform_get_irq(pdev, 0); |
| const struct armada_variant *variant; |
| struct device_node *port = NULL; |
| |
| if (irq < 0) |
| return irq; |
| |
| if (!dev->of_node) { |
| const struct platform_device_id *id; |
| |
| id = platform_get_device_id(pdev); |
| if (!id) |
| return -ENXIO; |
| |
| variant = (const struct armada_variant *)id->driver_data; |
| } else { |
| const struct of_device_id *match; |
| struct device_node *np, *parent = dev->of_node; |
| |
| match = of_match_device(dev->driver->of_match_table, dev); |
| if (!match) |
| return -ENXIO; |
| |
| np = of_get_child_by_name(parent, "ports"); |
| if (np) |
| parent = np; |
| port = of_get_child_by_name(parent, "port"); |
| of_node_put(np); |
| if (!port) { |
| dev_err(dev, "no port node found in %s\n", |
| parent->full_name); |
| return -ENXIO; |
| } |
| |
| variant = match->data; |
| } |
| |
| return armada_drm_crtc_create(drm, dev, res, irq, variant, port); |
| } |
| |
| static void |
| armada_lcd_unbind(struct device *dev, struct device *master, void *data) |
| { |
| struct armada_crtc *dcrtc = dev_get_drvdata(dev); |
| |
| armada_drm_crtc_destroy(&dcrtc->crtc); |
| } |
| |
| static const struct component_ops armada_lcd_ops = { |
| .bind = armada_lcd_bind, |
| .unbind = armada_lcd_unbind, |
| }; |
| |
| static int armada_lcd_probe(struct platform_device *pdev) |
| { |
| return component_add(&pdev->dev, &armada_lcd_ops); |
| } |
| |
| static int armada_lcd_remove(struct platform_device *pdev) |
| { |
| component_del(&pdev->dev, &armada_lcd_ops); |
| return 0; |
| } |
| |
| static struct of_device_id armada_lcd_of_match[] = { |
| { |
| .compatible = "marvell,dove-lcd", |
| .data = &armada510_ops, |
| }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, armada_lcd_of_match); |
| |
| static const struct platform_device_id armada_lcd_platform_ids[] = { |
| { |
| .name = "armada-lcd", |
| .driver_data = (unsigned long)&armada510_ops, |
| }, { |
| .name = "armada-510-lcd", |
| .driver_data = (unsigned long)&armada510_ops, |
| }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(platform, armada_lcd_platform_ids); |
| |
| struct platform_driver armada_lcd_platform_driver = { |
| .probe = armada_lcd_probe, |
| .remove = armada_lcd_remove, |
| .driver = { |
| .name = "armada-lcd", |
| .owner = THIS_MODULE, |
| .of_match_table = armada_lcd_of_match, |
| }, |
| .id_table = armada_lcd_platform_ids, |
| }; |