| ; Windows USB CDC ACM Setup File |
| |
| ; Based on INF template which was: |
| ; Copyright (c) 2000 Microsoft Corporation |
| ; Copyright (c) 2007 Microchip Technology Inc. |
| ; likely to be covered by the MLPL as found at: |
| ; <http://msdn.microsoft.com/en-us/cc300389.aspx#MLPL>. |
| ; For use only on Windows operating systems. |
| |
| [Version] |
| Signature="$Windows NT$" |
| Class=Ports |
| ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} |
| Provider=%Linux% |
| DriverVer=11/15/2007,5.1.2600.0 |
| |
| [Manufacturer] |
| %Linux%=DeviceList, NTamd64 |
| |
| [DestinationDirs] |
| DefaultDestDir=12 |
| |
| |
| ;------------------------------------------------------------------------------ |
| ; Windows 2000/XP/Vista-32bit Sections |
| ;------------------------------------------------------------------------------ |
| |
| [DriverInstall.nt] |
| include=mdmcpq.inf |
| CopyFiles=DriverCopyFiles.nt |
| AddReg=DriverInstall.nt.AddReg |
| |
| [DriverCopyFiles.nt] |
| usbser.sys,,,0x20 |
| |
| [DriverInstall.nt.AddReg] |
| HKR,,DevLoader,,*ntkern |
| HKR,,NTMPDriver,,USBSER.sys |
| HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" |
| |
| [DriverInstall.nt.Services] |
| AddService=usbser, 0x00000002, DriverService.nt |
| |
| [DriverService.nt] |
| DisplayName=%SERVICE% |
| ServiceType=1 |
| StartType=3 |
| ErrorControl=1 |
| ServiceBinary=%12%\USBSER.sys |
| |
| ;------------------------------------------------------------------------------ |
| ; Vista-64bit Sections |
| ;------------------------------------------------------------------------------ |
| |
| [DriverInstall.NTamd64] |
| include=mdmcpq.inf |
| CopyFiles=DriverCopyFiles.NTamd64 |
| AddReg=DriverInstall.NTamd64.AddReg |
| |
| [DriverCopyFiles.NTamd64] |
| USBSER.sys,,,0x20 |
| |
| [DriverInstall.NTamd64.AddReg] |
| HKR,,DevLoader,,*ntkern |
| HKR,,NTMPDriver,,USBSER.sys |
| HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" |
| |
| [DriverInstall.NTamd64.Services] |
| AddService=usbser, 0x00000002, DriverService.NTamd64 |
| |
| [DriverService.NTamd64] |
| DisplayName=%SERVICE% |
| ServiceType=1 |
| StartType=3 |
| ErrorControl=1 |
| ServiceBinary=%12%\USBSER.sys |
| |
| |
| ;------------------------------------------------------------------------------ |
| ; Vendor and Product ID Definitions |
| ;------------------------------------------------------------------------------ |
| ; When developing your USB device, the VID and PID used in the PC side |
| ; application program and the firmware on the microcontroller must match. |
| ; Modify the below line to use your VID and PID. Use the format as shown |
| ; below. |
| ; Note: One INF file can be used for multiple devices with different |
| ; VID and PIDs. For each supported device, append |
| ; ",USB\VID_xxxx&PID_yyyy" to the end of the line. |
| ;------------------------------------------------------------------------------ |
| [SourceDisksFiles] |
| [SourceDisksNames] |
| [DeviceList] |
| %DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02, USB\VID_1D6B&PID_0106&MI_00 |
| |
| [DeviceList.NTamd64] |
| %DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02, USB\VID_1D6B&PID_0106&MI_00 |
| |
| |
| ;------------------------------------------------------------------------------ |
| ; String Definitions |
| ;------------------------------------------------------------------------------ |
| ;Modify these strings to customize your device |
| ;------------------------------------------------------------------------------ |
| [Strings] |
| Linux = "Linux Developer Community" |
| DESCRIPTION = "Gadget Serial" |
| SERVICE = "USB RS-232 Emulation Driver" |
