| |
| #ifndef XILINX_LL_TEMAC_H |
| #define XILINX_LL_TEMAC_H |
| |
| #include <linux/netdevice.h> |
| #include <linux/of.h> |
| #include <linux/spinlock.h> |
| |
| #ifdef CONFIG_PPC_DCR |
| #include <asm/dcr.h> |
| #include <asm/dcr-regs.h> |
| #endif |
| |
| /* packet size info */ |
| #define XTE_HDR_SIZE 14 /* size of Ethernet header */ |
| #define XTE_TRL_SIZE 4 /* size of Ethernet trailer (FCS) */ |
| #define XTE_JUMBO_MTU 9000 |
| #define XTE_MAX_JUMBO_FRAME_SIZE (XTE_JUMBO_MTU + XTE_HDR_SIZE + XTE_TRL_SIZE) |
| |
| /* Configuration options */ |
| |
| /* Accept all incoming packets. |
| * This option defaults to disabled (cleared) */ |
| #define XTE_OPTION_PROMISC (1 << 0) |
| /* Jumbo frame support for Tx & Rx. |
| * This option defaults to disabled (cleared) */ |
| #define XTE_OPTION_JUMBO (1 << 1) |
| /* VLAN Rx & Tx frame support. |
| * This option defaults to disabled (cleared) */ |
| #define XTE_OPTION_VLAN (1 << 2) |
| /* Enable recognition of flow control frames on Rx |
| * This option defaults to enabled (set) */ |
| #define XTE_OPTION_FLOW_CONTROL (1 << 4) |
| /* Strip FCS and PAD from incoming frames. |
| * Note: PAD from VLAN frames is not stripped. |
| * This option defaults to disabled (set) */ |
| #define XTE_OPTION_FCS_STRIP (1 << 5) |
| /* Generate FCS field and add PAD automatically for outgoing frames. |
| * This option defaults to enabled (set) */ |
| #define XTE_OPTION_FCS_INSERT (1 << 6) |
| /* Enable Length/Type error checking for incoming frames. When this option is |
| set, the MAC will filter frames that have a mismatched type/length field |
| and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these |
| types of frames are encountered. When this option is cleared, the MAC will |
| allow these types of frames to be received. |
| This option defaults to enabled (set) */ |
| #define XTE_OPTION_LENTYPE_ERR (1 << 7) |
| /* Enable the transmitter. |
| * This option defaults to enabled (set) */ |
| #define XTE_OPTION_TXEN (1 << 11) |
| /* Enable the receiver |
| * This option defaults to enabled (set) */ |
| #define XTE_OPTION_RXEN (1 << 12) |
| |
| /* Default options set when device is initialized or reset */ |
| #define XTE_OPTION_DEFAULTS \ |
| (XTE_OPTION_TXEN | \ |
| XTE_OPTION_FLOW_CONTROL | \ |
| XTE_OPTION_RXEN) |
| |
| /* XPS_LL_TEMAC SDMA registers definition */ |
| |
| #define TX_NXTDESC_PTR 0x00 /* r */ |
| #define TX_CURBUF_ADDR 0x01 /* r */ |
| #define TX_CURBUF_LENGTH 0x02 /* r */ |
| #define TX_CURDESC_PTR 0x03 /* rw */ |
| #define TX_TAILDESC_PTR 0x04 /* rw */ |
| #define TX_CHNL_CTRL 0x05 /* rw */ |
| /* |
| 0:7 24:31 IRQTimeout |
| 8:15 16:23 IRQCount |
| 16:20 11:15 Reserved |
| 21 10 0 |
| 22 9 UseIntOnEnd |
| 23 8 LdIRQCnt |
| 24 7 IRQEn |
| 25:28 3:6 Reserved |
| 29 2 IrqErrEn |
| 30 1 IrqDlyEn |
| 31 0 IrqCoalEn |
| */ |
| #define CHNL_CTRL_IRQ_IOE (1 << 9) |
| #define CHNL_CTRL_IRQ_EN (1 << 7) |
| #define CHNL_CTRL_IRQ_ERR_EN (1 << 2) |
| #define CHNL_CTRL_IRQ_DLY_EN (1 << 1) |
| #define CHNL_CTRL_IRQ_COAL_EN (1 << 0) |
| #define TX_IRQ_REG 0x06 /* rw */ |
| /* |
| 0:7 24:31 DltTmrValue |
| 8:15 16:23 ClscCntrValue |
| 16:17 14:15 Reserved |
| 18:21 10:13 ClscCnt |
| 22:23 8:9 DlyCnt |
| 24:28 3::7 Reserved |
| 29 2 ErrIrq |
| 30 1 DlyIrq |
| 31 0 CoalIrq |
| */ |
| #define TX_CHNL_STS 0x07 /* r */ |
| /* |
| 0:9 22:31 Reserved |
| 10 21 TailPErr |
| 11 20 CmpErr |
| 12 19 AddrErr |
| 13 18 NxtPErr |
| 14 17 CurPErr |
| 15 16 BsyWr |
| 16:23 8:15 Reserved |
| 24 7 Error |
| 25 6 IOE |
| 26 5 SOE |
| 27 4 Cmplt |
| 28 3 SOP |
| 29 2 EOP |
| 30 1 EngBusy |
| 31 0 Reserved |
| */ |
| |
| #define RX_NXTDESC_PTR 0x08 /* r */ |
| #define RX_CURBUF_ADDR 0x09 /* r */ |
| #define RX_CURBUF_LENGTH 0x0a /* r */ |
| #define RX_CURDESC_PTR 0x0b /* rw */ |
| #define RX_TAILDESC_PTR 0x0c /* rw */ |
| #define RX_CHNL_CTRL 0x0d /* rw */ |
| /* |
| 0:7 24:31 IRQTimeout |
| 8:15 16:23 IRQCount |
| 16:20 11:15 Reserved |
| 21 10 0 |
| 22 9 UseIntOnEnd |
| 23 8 LdIRQCnt |
| 24 7 IRQEn |
| 25:28 3:6 Reserved |
| 29 2 IrqErrEn |
| 30 1 IrqDlyEn |
| 31 0 IrqCoalEn |
| */ |
| #define RX_IRQ_REG 0x0e /* rw */ |
| #define IRQ_COAL (1 << 0) |
| #define IRQ_DLY (1 << 1) |
| #define IRQ_ERR (1 << 2) |
| #define IRQ_DMAERR (1 << 7) /* this is not documented ??? */ |
| /* |
| 0:7 24:31 DltTmrValue |
| 8:15 16:23 ClscCntrValue |
| 16:17 14:15 Reserved |
| 18:21 10:13 ClscCnt |
| 22:23 8:9 DlyCnt |
| 24:28 3::7 Reserved |
| */ |
| #define RX_CHNL_STS 0x0f /* r */ |
| #define CHNL_STS_ENGBUSY (1 << 1) |
| #define CHNL_STS_EOP (1 << 2) |
| #define CHNL_STS_SOP (1 << 3) |
| #define CHNL_STS_CMPLT (1 << 4) |
| #define CHNL_STS_SOE (1 << 5) |
| #define CHNL_STS_IOE (1 << 6) |
| #define CHNL_STS_ERR (1 << 7) |
| |
| #define CHNL_STS_BSYWR (1 << 16) |
| #define CHNL_STS_CURPERR (1 << 17) |
| #define CHNL_STS_NXTPERR (1 << 18) |
| #define CHNL_STS_ADDRERR (1 << 19) |
| #define CHNL_STS_CMPERR (1 << 20) |
| #define CHNL_STS_TAILERR (1 << 21) |
| /* |
| 0:9 22:31 Reserved |
| 10 21 TailPErr |
| 11 20 CmpErr |
| 12 19 AddrErr |
| 13 18 NxtPErr |
| 14 17 CurPErr |
| 15 16 BsyWr |
| 16:23 8:15 Reserved |
| 24 7 Error |
| 25 6 IOE |
| 26 5 SOE |
| 27 4 Cmplt |
| 28 3 SOP |
| 29 2 EOP |
| 30 1 EngBusy |
| 31 0 Reserved |
| */ |
| |
| #define DMA_CONTROL_REG 0x10 /* rw */ |
| #define DMA_CONTROL_RST (1 << 0) |
| #define DMA_TAIL_ENABLE (1 << 2) |
| |
| /* XPS_LL_TEMAC direct registers definition */ |
| |
| #define XTE_RAF0_OFFSET 0x00 |
| #define RAF0_RST (1 << 0) |
| #define RAF0_MCSTREJ (1 << 1) |
| #define RAF0_BCSTREJ (1 << 2) |
| #define XTE_TPF0_OFFSET 0x04 |
| #define XTE_IFGP0_OFFSET 0x08 |
| #define XTE_ISR0_OFFSET 0x0c |
| #define ISR0_HARDACSCMPLT (1 << 0) |
| #define ISR0_AUTONEG (1 << 1) |
| #define ISR0_RXCMPLT (1 << 2) |
| #define ISR0_RXREJ (1 << 3) |
| #define ISR0_RXFIFOOVR (1 << 4) |
| #define ISR0_TXCMPLT (1 << 5) |
| #define ISR0_RXDCMLCK (1 << 6) |
| |
| #define XTE_IPR0_OFFSET 0x10 |
| #define XTE_IER0_OFFSET 0x14 |
| |
| #define XTE_MSW0_OFFSET 0x20 |
| #define XTE_LSW0_OFFSET 0x24 |
| #define XTE_CTL0_OFFSET 0x28 |
| #define XTE_RDY0_OFFSET 0x2c |
| |
| #define XTE_RSE_MIIM_RR_MASK 0x0002 |
| #define XTE_RSE_MIIM_WR_MASK 0x0004 |
| #define XTE_RSE_CFG_RR_MASK 0x0020 |
| #define XTE_RSE_CFG_WR_MASK 0x0040 |
| #define XTE_RDY0_HARD_ACS_RDY_MASK (0x10000) |
| |
| /* XPS_LL_TEMAC indirect registers offset definition */ |
| |
| #define XTE_RXC0_OFFSET 0x00000200 /* Rx configuration word 0 */ |
| #define XTE_RXC1_OFFSET 0x00000240 /* Rx configuration word 1 */ |
| #define XTE_RXC1_RXRST_MASK (1 << 31) /* Receiver reset */ |
| #define XTE_RXC1_RXJMBO_MASK (1 << 30) /* Jumbo frame enable */ |
| #define XTE_RXC1_RXFCS_MASK (1 << 29) /* FCS not stripped */ |
| #define XTE_RXC1_RXEN_MASK (1 << 28) /* Receiver enable */ |
| #define XTE_RXC1_RXVLAN_MASK (1 << 27) /* VLAN enable */ |
| #define XTE_RXC1_RXHD_MASK (1 << 26) /* Half duplex */ |
| #define XTE_RXC1_RXLT_MASK (1 << 25) /* Length/type check disable */ |
| |
| #define XTE_TXC_OFFSET 0x00000280 /* Tx configuration */ |
| #define XTE_TXC_TXRST_MASK (1 << 31) /* Transmitter reset */ |
| #define XTE_TXC_TXJMBO_MASK (1 << 30) /* Jumbo frame enable */ |
| #define XTE_TXC_TXFCS_MASK (1 << 29) /* Generate FCS */ |
| #define XTE_TXC_TXEN_MASK (1 << 28) /* Transmitter enable */ |
| #define XTE_TXC_TXVLAN_MASK (1 << 27) /* VLAN enable */ |
| #define XTE_TXC_TXHD_MASK (1 << 26) /* Half duplex */ |
| |
| #define XTE_FCC_OFFSET 0x000002C0 /* Flow control config */ |
| #define XTE_FCC_RXFLO_MASK (1 << 29) /* Rx flow control enable */ |
| #define XTE_FCC_TXFLO_MASK (1 << 30) /* Tx flow control enable */ |
| |
| #define XTE_EMCFG_OFFSET 0x00000300 /* EMAC configuration */ |
| #define XTE_EMCFG_LINKSPD_MASK 0xC0000000 /* Link speed */ |
| #define XTE_EMCFG_HOSTEN_MASK (1 << 26) /* Host interface enable */ |
| #define XTE_EMCFG_LINKSPD_10 0x00000000 /* 10 Mbit LINKSPD_MASK */ |
| #define XTE_EMCFG_LINKSPD_100 (1 << 30) /* 100 Mbit LINKSPD_MASK */ |
| #define XTE_EMCFG_LINKSPD_1000 (1 << 31) /* 1000 Mbit LINKSPD_MASK */ |
| |
| #define XTE_GMIC_OFFSET 0x00000320 /* RGMII/SGMII config */ |
| #define XTE_MC_OFFSET 0x00000340 /* MDIO configuration */ |
| #define XTE_UAW0_OFFSET 0x00000380 /* Unicast address word 0 */ |
| #define XTE_UAW1_OFFSET 0x00000384 /* Unicast address word 1 */ |
| |
| #define XTE_MAW0_OFFSET 0x00000388 /* Multicast addr word 0 */ |
| #define XTE_MAW1_OFFSET 0x0000038C /* Multicast addr word 1 */ |
| #define XTE_AFM_OFFSET 0x00000390 /* Promiscuous mode */ |
| #define XTE_AFM_EPPRM_MASK (1 << 31) /* Promiscuous mode enable */ |
| |
| /* Interrupt Request status */ |
| #define XTE_TIS_OFFSET 0x000003A0 |
| #define TIS_FRIS (1 << 0) |
| #define TIS_MRIS (1 << 1) |
| #define TIS_MWIS (1 << 2) |
| #define TIS_ARIS (1 << 3) |
| #define TIS_AWIS (1 << 4) |
| #define TIS_CRIS (1 << 5) |
| #define TIS_CWIS (1 << 6) |
| |
| #define XTE_TIE_OFFSET 0x000003A4 /* Interrupt enable */ |
| |
| /** MII Mamagement Control register (MGTCR) */ |
| #define XTE_MGTDR_OFFSET 0x000003B0 /* MII data */ |
| #define XTE_MIIMAI_OFFSET 0x000003B4 /* MII control */ |
| |
| #define CNTLREG_WRITE_ENABLE_MASK 0x8000 |
| #define CNTLREG_EMAC1SEL_MASK 0x0400 |
| #define CNTLREG_ADDRESSCODE_MASK 0x03ff |
| |
| /* CDMAC descriptor status bit definitions */ |
| |
| #define STS_CTRL_APP0_ERR (1 << 31) |
| #define STS_CTRL_APP0_IRQONEND (1 << 30) |
| /* undoccumented */ |
| #define STS_CTRL_APP0_STOPONEND (1 << 29) |
| #define STS_CTRL_APP0_CMPLT (1 << 28) |
| #define STS_CTRL_APP0_SOP (1 << 27) |
| #define STS_CTRL_APP0_EOP (1 << 26) |
| #define STS_CTRL_APP0_ENGBUSY (1 << 25) |
| /* undocumented */ |
| #define STS_CTRL_APP0_ENGRST (1 << 24) |
| |
| #define TX_CONTROL_CALC_CSUM_MASK 1 |
| |
| #define MULTICAST_CAM_TABLE_NUM 4 |
| |
| /* TEMAC Synthesis features */ |
| #define TEMAC_FEATURE_RX_CSUM (1 << 0) |
| #define TEMAC_FEATURE_TX_CSUM (1 << 1) |
| |
| /* TX/RX CURDESC_PTR points to first descriptor */ |
| /* TX/RX TAILDESC_PTR points to last descriptor in linked list */ |
| |
| /** |
| * struct cdmac_bd - LocalLink buffer descriptor format |
| * |
| * app0 bits: |
| * 0 Error |
| * 1 IrqOnEnd generate an interrupt at completion of DMA op |
| * 2 reserved |
| * 3 completed Current descriptor completed |
| * 4 SOP TX - marks first desc/ RX marks first desct |
| * 5 EOP TX marks last desc/RX marks last desc |
| * 6 EngBusy DMA is processing |
| * 7 reserved |
| * 8:31 application specific |
| */ |
| struct cdmac_bd { |
| u32 next; /* Physical address of next buffer descriptor */ |
| u32 phys; |
| u32 len; |
| u32 app0; |
| u32 app1; /* TX start << 16 | insert */ |
| u32 app2; /* TX csum */ |
| u32 app3; |
| u32 app4; /* skb for TX length for RX */ |
| }; |
| |
| struct temac_local { |
| struct net_device *ndev; |
| struct device *dev; |
| |
| /* Connection to PHY device */ |
| struct phy_device *phy_dev; /* Pointer to PHY device */ |
| struct device_node *phy_node; |
| |
| /* MDIO bus data */ |
| struct mii_bus *mii_bus; /* MII bus reference */ |
| |
| /* IO registers, dma functions and IRQs */ |
| void __iomem *regs; |
| void __iomem *sdma_regs; |
| #ifdef CONFIG_PPC_DCR |
| dcr_host_t sdma_dcrs; |
| #endif |
| u32 (*dma_in)(struct temac_local *, int); |
| void (*dma_out)(struct temac_local *, int, u32); |
| |
| int tx_irq; |
| int rx_irq; |
| int emac_num; |
| |
| struct sk_buff **rx_skb; |
| spinlock_t rx_lock; |
| struct mutex indirect_mutex; |
| u32 options; /* Current options word */ |
| int last_link; |
| unsigned int temac_features; |
| |
| /* Buffer descriptors */ |
| struct cdmac_bd *tx_bd_v; |
| dma_addr_t tx_bd_p; |
| struct cdmac_bd *rx_bd_v; |
| dma_addr_t rx_bd_p; |
| int tx_bd_ci; |
| int tx_bd_next; |
| int tx_bd_tail; |
| int rx_bd_ci; |
| }; |
| |
| /* xilinx_temac.c */ |
| u32 temac_ior(struct temac_local *lp, int offset); |
| void temac_iow(struct temac_local *lp, int offset, u32 value); |
| int temac_indirect_busywait(struct temac_local *lp); |
| u32 temac_indirect_in32(struct temac_local *lp, int reg); |
| void temac_indirect_out32(struct temac_local *lp, int reg, u32 value); |
| |
| |
| /* xilinx_temac_mdio.c */ |
| int temac_mdio_setup(struct temac_local *lp, struct device_node *np); |
| void temac_mdio_teardown(struct temac_local *lp); |
| |
| #endif /* XILINX_LL_TEMAC_H */ |
