| #ifndef _NB8800_H_ |
| #define _NB8800_H_ |
| |
| #include <linux/types.h> |
| #include <linux/skbuff.h> |
| #include <linux/phy.h> |
| #include <linux/clk.h> |
| #include <linux/bitops.h> |
| |
| #define RX_DESC_COUNT 256 |
| #define TX_DESC_COUNT 256 |
| |
| #define NB8800_DESC_LOW 4 |
| |
| #define RX_BUF_SIZE 1552 |
| |
| #define RX_COPYBREAK 256 |
| #define RX_COPYHDR 128 |
| |
| #define MAX_MDC_CLOCK 2500000 |
| |
| /* Stargate Solutions SSN8800 core registers */ |
| #define NB8800_TX_CTL1 0x000 |
| #define TX_TPD BIT(5) |
| #define TX_APPEND_FCS BIT(4) |
| #define TX_PAD_EN BIT(3) |
| #define TX_RETRY_EN BIT(2) |
| #define TX_EN BIT(0) |
| |
| #define NB8800_TX_CTL2 0x001 |
| |
| #define NB8800_RX_CTL 0x004 |
| #define RX_BC_DISABLE BIT(7) |
| #define RX_RUNT BIT(6) |
| #define RX_AF_EN BIT(5) |
| #define RX_PAUSE_EN BIT(3) |
| #define RX_SEND_CRC BIT(2) |
| #define RX_PAD_STRIP BIT(1) |
| #define RX_EN BIT(0) |
| |
| #define NB8800_RANDOM_SEED 0x008 |
| #define NB8800_TX_SDP 0x14 |
| #define NB8800_TX_TPDP1 0x18 |
| #define NB8800_TX_TPDP2 0x19 |
| #define NB8800_SLOT_TIME 0x1c |
| |
| #define NB8800_MDIO_CMD 0x020 |
| #define MDIO_CMD_GO BIT(31) |
| #define MDIO_CMD_WR BIT(26) |
| #define MDIO_CMD_ADDR(x) ((x) << 21) |
| #define MDIO_CMD_REG(x) ((x) << 16) |
| #define MDIO_CMD_DATA(x) ((x) << 0) |
| |
| #define NB8800_MDIO_STS 0x024 |
| #define MDIO_STS_ERR BIT(31) |
| |
| #define NB8800_MC_ADDR(i) (0x028 + (i)) |
| #define NB8800_MC_INIT 0x02e |
| #define NB8800_UC_ADDR(i) (0x03c + (i)) |
| |
| #define NB8800_MAC_MODE 0x044 |
| #define RGMII_MODE BIT(7) |
| #define HALF_DUPLEX BIT(4) |
| #define BURST_EN BIT(3) |
| #define LOOPBACK_EN BIT(2) |
| #define GMAC_MODE BIT(0) |
| |
| #define NB8800_IC_THRESHOLD 0x050 |
| #define NB8800_PE_THRESHOLD 0x051 |
| #define NB8800_PF_THRESHOLD 0x052 |
| #define NB8800_TX_BUFSIZE 0x054 |
| #define NB8800_FIFO_CTL 0x056 |
| #define NB8800_PQ1 0x060 |
| #define NB8800_PQ2 0x061 |
| #define NB8800_SRC_ADDR(i) (0x06a + (i)) |
| #define NB8800_STAT_DATA 0x078 |
| #define NB8800_STAT_INDEX 0x07c |
| #define NB8800_STAT_CLEAR 0x07d |
| |
| #define NB8800_SLEEP_MODE 0x07e |
| #define SLEEP_MODE BIT(0) |
| |
| #define NB8800_WAKEUP 0x07f |
| #define WAKEUP BIT(0) |
| |
| /* Aurora NB8800 host interface registers */ |
| #define NB8800_TXC_CR 0x100 |
| #define TCR_LK BIT(12) |
| #define TCR_DS BIT(11) |
| #define TCR_BTS(x) (((x) & 0x7) << 8) |
| #define TCR_DIE BIT(7) |
| #define TCR_TFI(x) (((x) & 0x7) << 4) |
| #define TCR_LE BIT(3) |
| #define TCR_RS BIT(2) |
| #define TCR_DM BIT(1) |
| #define TCR_EN BIT(0) |
| |
| #define NB8800_TXC_SR 0x104 |
| #define TSR_DE BIT(3) |
| #define TSR_DI BIT(2) |
| #define TSR_TO BIT(1) |
| #define TSR_TI BIT(0) |
| |
| #define NB8800_TX_SAR 0x108 |
| #define NB8800_TX_DESC_ADDR 0x10c |
| |
| #define NB8800_TX_REPORT_ADDR 0x110 |
| #define TX_BYTES_TRANSFERRED(x) (((x) >> 16) & 0xffff) |
| #define TX_FIRST_DEFERRAL BIT(7) |
| #define TX_EARLY_COLLISIONS(x) (((x) >> 3) & 0xf) |
| #define TX_LATE_COLLISION BIT(2) |
| #define TX_PACKET_DROPPED BIT(1) |
| #define TX_FIFO_UNDERRUN BIT(0) |
| #define IS_TX_ERROR(r) ((r) & 0x07) |
| |
| #define NB8800_TX_FIFO_SR 0x114 |
| #define NB8800_TX_ITR 0x118 |
| |
| #define NB8800_RXC_CR 0x200 |
| #define RCR_FL BIT(13) |
| #define RCR_LK BIT(12) |
| #define RCR_DS BIT(11) |
| #define RCR_BTS(x) (((x) & 7) << 8) |
| #define RCR_DIE BIT(7) |
| #define RCR_RFI(x) (((x) & 7) << 4) |
| #define RCR_LE BIT(3) |
| #define RCR_RS BIT(2) |
| #define RCR_DM BIT(1) |
| #define RCR_EN BIT(0) |
| |
| #define NB8800_RXC_SR 0x204 |
| #define RSR_DE BIT(3) |
| #define RSR_DI BIT(2) |
| #define RSR_RO BIT(1) |
| #define RSR_RI BIT(0) |
| |
| #define NB8800_RX_SAR 0x208 |
| #define NB8800_RX_DESC_ADDR 0x20c |
| |
| #define NB8800_RX_REPORT_ADDR 0x210 |
| #define RX_BYTES_TRANSFERRED(x) (((x) >> 16) & 0xFFFF) |
| #define RX_MULTICAST_PKT BIT(9) |
| #define RX_BROADCAST_PKT BIT(8) |
| #define RX_LENGTH_ERR BIT(7) |
| #define RX_FCS_ERR BIT(6) |
| #define RX_RUNT_PKT BIT(5) |
| #define RX_FIFO_OVERRUN BIT(4) |
| #define RX_LATE_COLLISION BIT(3) |
| #define RX_ALIGNMENT_ERROR BIT(2) |
| #define RX_ERROR_MASK 0xfc |
| #define IS_RX_ERROR(r) ((r) & RX_ERROR_MASK) |
| |
| #define NB8800_RX_FIFO_SR 0x214 |
| #define NB8800_RX_ITR 0x218 |
| |
| /* Sigma Designs SMP86xx additional registers */ |
| #define NB8800_TANGOX_PAD_MODE 0x400 |
| #define PAD_MODE_MASK 0x7 |
| #define PAD_MODE_MII 0x0 |
| #define PAD_MODE_RGMII 0x1 |
| #define PAD_MODE_GTX_CLK_INV BIT(3) |
| #define PAD_MODE_GTX_CLK_DELAY BIT(4) |
| |
| #define NB8800_TANGOX_MDIO_CLKDIV 0x420 |
| #define NB8800_TANGOX_RESET 0x424 |
| |
| /* Hardware DMA descriptor */ |
| struct nb8800_dma_desc { |
| u32 s_addr; /* start address */ |
| u32 n_addr; /* next descriptor address */ |
| u32 r_addr; /* report address */ |
| u32 config; |
| } __aligned(8); |
| |
| #define DESC_ID BIT(23) |
| #define DESC_EOC BIT(22) |
| #define DESC_EOF BIT(21) |
| #define DESC_LK BIT(20) |
| #define DESC_DS BIT(19) |
| #define DESC_BTS(x) (((x) & 0x7) << 16) |
| |
| /* DMA descriptor and associated data for rx. |
| * Allocated from coherent memory. |
| */ |
| struct nb8800_rx_desc { |
| /* DMA descriptor */ |
| struct nb8800_dma_desc desc; |
| |
| /* Status report filled in by hardware */ |
| u32 report; |
| }; |
| |
| /* Address of buffer on rx ring */ |
| struct nb8800_rx_buf { |
| struct page *page; |
| unsigned long offset; |
| }; |
| |
| /* DMA descriptors and associated data for tx. |
| * Allocated from coherent memory. |
| */ |
| struct nb8800_tx_desc { |
| /* DMA descriptor. The second descriptor is used if packet |
| * data is unaligned. |
| */ |
| struct nb8800_dma_desc desc[2]; |
| |
| /* Status report filled in by hardware */ |
| u32 report; |
| |
| /* Bounce buffer for initial unaligned part of packet */ |
| u8 buf[8] __aligned(8); |
| }; |
| |
| /* Packet in tx queue */ |
| struct nb8800_tx_buf { |
| /* Currently queued skb */ |
| struct sk_buff *skb; |
| |
| /* DMA address of the first descriptor */ |
| dma_addr_t dma_desc; |
| |
| /* DMA address of packet data */ |
| dma_addr_t dma_addr; |
| |
| /* Length of DMA mapping, less than skb->len if alignment |
| * buffer is used. |
| */ |
| unsigned int dma_len; |
| |
| /* Number of packets in chain starting here */ |
| unsigned int chain_len; |
| |
| /* Packet chain ready to be submitted to hardware */ |
| bool ready; |
| }; |
| |
| struct nb8800_priv { |
| struct napi_struct napi; |
| |
| void __iomem *base; |
| |
| /* RX DMA descriptors */ |
| struct nb8800_rx_desc *rx_descs; |
| |
| /* RX buffers referenced by DMA descriptors */ |
| struct nb8800_rx_buf *rx_bufs; |
| |
| /* Current end of chain */ |
| u32 rx_eoc; |
| |
| /* Value for rx interrupt time register in NAPI interrupt mode */ |
| u32 rx_itr_irq; |
| |
| /* Value for rx interrupt time register in NAPI poll mode */ |
| u32 rx_itr_poll; |
| |
| /* Value for config field of rx DMA descriptors */ |
| u32 rx_dma_config; |
| |
| /* TX DMA descriptors */ |
| struct nb8800_tx_desc *tx_descs; |
| |
| /* TX packet queue */ |
| struct nb8800_tx_buf *tx_bufs; |
| |
| /* Number of free tx queue entries */ |
| atomic_t tx_free; |
| |
| /* First free tx queue entry */ |
| u32 tx_next; |
| |
| /* Next buffer to transmit */ |
| u32 tx_queue; |
| |
| /* Start of current packet chain */ |
| struct nb8800_tx_buf *tx_chain; |
| |
| /* Next buffer to reclaim */ |
| u32 tx_done; |
| |
| /* Lock for DMA activation */ |
| spinlock_t tx_lock; |
| |
| struct mii_bus *mii_bus; |
| struct device_node *phy_node; |
| struct phy_device *phydev; |
| |
| /* PHY connection type from DT */ |
| int phy_mode; |
| |
| /* Current link status */ |
| int speed; |
| int duplex; |
| int link; |
| |
| /* Pause settings */ |
| bool pause_aneg; |
| bool pause_rx; |
| bool pause_tx; |
| |
| /* DMA base address of rx descriptors, see rx_descs above */ |
| dma_addr_t rx_desc_dma; |
| |
| /* DMA base address of tx descriptors, see tx_descs above */ |
| dma_addr_t tx_desc_dma; |
| |
| struct clk *clk; |
| }; |
| |
| struct nb8800_ops { |
| int (*init)(struct net_device *dev); |
| int (*reset)(struct net_device *dev); |
| }; |
| |
| #endif /* _NB8800_H_ */ |