| /* |
| Madge Horizon ATM Adapter driver. |
| Copyright (C) 1995-1999 Madge Networks Ltd. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| |
| The GNU GPL is contained in /usr/doc/copyright/GPL on a Debian |
| system and in the file COPYING in the Linux kernel source. |
| */ |
| |
| /* |
| IMPORTANT NOTE: Madge Networks no longer makes the adapters |
| supported by this driver and makes no commitment to maintain it. |
| */ |
| |
| /* too many macros - change to inline functions */ |
| |
| #ifndef DRIVER_ATM_HORIZON_H |
| #define DRIVER_ATM_HORIZON_H |
| |
| |
| #ifdef CONFIG_ATM_HORIZON_DEBUG |
| #define DEBUG_HORIZON |
| #endif |
| |
| #define DEV_LABEL "hrz" |
| |
| #ifndef PCI_VENDOR_ID_MADGE |
| #define PCI_VENDOR_ID_MADGE 0x10B6 |
| #endif |
| #ifndef PCI_DEVICE_ID_MADGE_HORIZON |
| #define PCI_DEVICE_ID_MADGE_HORIZON 0x1000 |
| #endif |
| |
| // diagnostic output |
| |
| #define PRINTK(severity,format,args...) \ |
| printk(severity DEV_LABEL ": " format "\n" , ## args) |
| |
| #ifdef DEBUG_HORIZON |
| |
| #define DBG_ERR 0x0001 |
| #define DBG_WARN 0x0002 |
| #define DBG_INFO 0x0004 |
| #define DBG_VCC 0x0008 |
| #define DBG_QOS 0x0010 |
| #define DBG_TX 0x0020 |
| #define DBG_RX 0x0040 |
| #define DBG_SKB 0x0080 |
| #define DBG_IRQ 0x0100 |
| #define DBG_FLOW 0x0200 |
| #define DBG_BUS 0x0400 |
| #define DBG_REGS 0x0800 |
| #define DBG_DATA 0x1000 |
| #define DBG_MASK 0x1fff |
| |
| /* the ## prevents the annoying double expansion of the macro arguments */ |
| /* KERN_INFO is used since KERN_DEBUG often does not make it to the console */ |
| #define PRINTDB(bits,format,args...) \ |
| ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format , ## args) : 1 ) |
| #define PRINTDM(bits,format,args...) \ |
| ( (debug & (bits)) ? printk (format , ## args) : 1 ) |
| #define PRINTDE(bits,format,args...) \ |
| ( (debug & (bits)) ? printk (format "\n" , ## args) : 1 ) |
| #define PRINTD(bits,format,args...) \ |
| ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format "\n" , ## args) : 1 ) |
| |
| #else |
| |
| #define PRINTD(bits,format,args...) |
| #define PRINTDB(bits,format,args...) |
| #define PRINTDM(bits,format,args...) |
| #define PRINTDE(bits,format,args...) |
| |
| #endif |
| |
| #define PRINTDD(sec,fmt,args...) |
| #define PRINTDDB(sec,fmt,args...) |
| #define PRINTDDM(sec,fmt,args...) |
| #define PRINTDDE(sec,fmt,args...) |
| |
| // fixed constants |
| |
| #define SPARE_BUFFER_POOL_SIZE MAX_VCS |
| #define HRZ_MAX_VPI 4 |
| #define MIN_PCI_LATENCY 48 // 24 IS TOO SMALL |
| |
| /* Horizon specific bits */ |
| /* Register offsets */ |
| |
| #define HRZ_IO_EXTENT 0x80 |
| |
| #define DATA_PORT_OFF 0x00 |
| #define TX_CHANNEL_PORT_OFF 0x04 |
| #define TX_DESCRIPTOR_PORT_OFF 0x08 |
| #define MEMORY_PORT_OFF 0x0C |
| #define MEM_WR_ADDR_REG_OFF 0x14 |
| #define MEM_RD_ADDR_REG_OFF 0x18 |
| #define CONTROL_0_REG 0x1C |
| #define INT_SOURCE_REG_OFF 0x20 |
| #define INT_ENABLE_REG_OFF 0x24 |
| #define MASTER_RX_ADDR_REG_OFF 0x28 |
| #define MASTER_RX_COUNT_REG_OFF 0x2C |
| #define MASTER_TX_ADDR_REG_OFF 0x30 |
| #define MASTER_TX_COUNT_REG_OFF 0x34 |
| #define TX_DESCRIPTOR_REG_OFF 0x38 |
| #define TX_CHANNEL_CONFIG_COMMAND_OFF 0x40 |
| #define TX_CHANNEL_CONFIG_DATA_OFF 0x44 |
| #define TX_FREE_BUFFER_COUNT_OFF 0x48 |
| #define RX_FREE_BUFFER_COUNT_OFF 0x4C |
| #define TX_CONFIG_OFF 0x50 |
| #define TX_STATUS_OFF 0x54 |
| #define RX_CONFIG_OFF 0x58 |
| #define RX_LINE_CONFIG_OFF 0x5C |
| #define RX_QUEUE_RD_PTR_OFF 0x60 |
| #define RX_QUEUE_WR_PTR_OFF 0x64 |
| #define MAX_AAL5_CELL_COUNT_OFF 0x68 |
| #define RX_CHANNEL_PORT_OFF 0x6C |
| #define TX_CELL_COUNT_OFF 0x70 |
| #define RX_CELL_COUNT_OFF 0x74 |
| #define HEC_ERROR_COUNT_OFF 0x78 |
| #define UNASSIGNED_CELL_COUNT_OFF 0x7C |
| |
| /* Register bit definitions */ |
| |
| /* Control 0 register */ |
| |
| #define SEEPROM_DO 0x00000001 |
| #define SEEPROM_DI 0x00000002 |
| #define SEEPROM_SK 0x00000004 |
| #define SEEPROM_CS 0x00000008 |
| #define DEBUG_BIT_0 0x00000010 |
| #define DEBUG_BIT_1 0x00000020 |
| #define DEBUG_BIT_2 0x00000040 |
| // RESERVED 0x00000080 |
| #define DEBUG_BIT_0_OE 0x00000100 |
| #define DEBUG_BIT_1_OE 0x00000200 |
| #define DEBUG_BIT_2_OE 0x00000400 |
| // RESERVED 0x00000800 |
| #define DEBUG_BIT_0_STATE 0x00001000 |
| #define DEBUG_BIT_1_STATE 0x00002000 |
| #define DEBUG_BIT_2_STATE 0x00004000 |
| // RESERVED 0x00008000 |
| #define GENERAL_BIT_0 0x00010000 |
| #define GENERAL_BIT_1 0x00020000 |
| #define GENERAL_BIT_2 0x00040000 |
| #define GENERAL_BIT_3 0x00080000 |
| #define RESET_HORIZON 0x00100000 |
| #define RESET_ATM 0x00200000 |
| #define RESET_RX 0x00400000 |
| #define RESET_TX 0x00800000 |
| #define RESET_HOST 0x01000000 |
| // RESERVED 0x02000000 |
| #define TARGET_RETRY_DISABLE 0x04000000 |
| #define ATM_LAYER_SELECT 0x08000000 |
| #define ATM_LAYER_STATUS 0x10000000 |
| // RESERVED 0xE0000000 |
| |
| /* Interrupt source and enable registers */ |
| |
| #define RX_DATA_AV 0x00000001 |
| #define RX_DISABLED 0x00000002 |
| #define TIMING_MARKER 0x00000004 |
| #define FORCED 0x00000008 |
| #define RX_BUS_MASTER_COMPLETE 0x00000010 |
| #define TX_BUS_MASTER_COMPLETE 0x00000020 |
| #define ABR_TX_CELL_COUNT_INT 0x00000040 |
| #define DEBUG_INT 0x00000080 |
| // RESERVED 0xFFFFFF00 |
| |
| /* PIO and Bus Mastering */ |
| |
| #define MAX_PIO_COUNT 0x000000ff // 255 - make tunable? |
| // 8188 is a hard limit for bus mastering |
| #define MAX_TRANSFER_COUNT 0x00001ffc // 8188 |
| #define MASTER_TX_AUTO_APPEND_DESC 0x80000000 |
| |
| /* TX channel config command port */ |
| |
| #define PCR_TIMER_ACCESS 0x0000 |
| #define SCR_TIMER_ACCESS 0x0001 |
| #define BUCKET_CAPACITY_ACCESS 0x0002 |
| #define BUCKET_FULLNESS_ACCESS 0x0003 |
| #define RATE_TYPE_ACCESS 0x0004 |
| // UNUSED 0x00F8 |
| #define TX_CHANNEL_CONFIG_MULT 0x0100 |
| // UNUSED 0xF800 |
| #define BUCKET_MAX_SIZE 0x003f |
| |
| /* TX channel config data port */ |
| |
| #define CLOCK_SELECT_SHIFT 4 |
| #define CLOCK_DISABLE 0x00ff |
| |
| #define IDLE_RATE_TYPE 0x0 |
| #define ABR_RATE_TYPE 0x1 |
| #define VBR_RATE_TYPE 0x2 |
| #define CBR_RATE_TYPE 0x3 |
| |
| /* TX config register */ |
| |
| #define DRVR_DRVRBAR_ENABLE 0x0001 |
| #define TXCLK_MUX_SELECT_RCLK 0x0002 |
| #define TRANSMIT_TIMING_MARKER 0x0004 |
| #define LOOPBACK_TIMING_MARKER 0x0008 |
| #define TX_TEST_MODE_16MHz 0x0000 |
| #define TX_TEST_MODE_8MHz 0x0010 |
| #define TX_TEST_MODE_5_33MHz 0x0020 |
| #define TX_TEST_MODE_4MHz 0x0030 |
| #define TX_TEST_MODE_3_2MHz 0x0040 |
| #define TX_TEST_MODE_2_66MHz 0x0050 |
| #define TX_TEST_MODE_2_29MHz 0x0060 |
| #define TX_NORMAL_OPERATION 0x0070 |
| #define ABR_ROUND_ROBIN 0x0080 |
| |
| /* TX status register */ |
| |
| #define IDLE_CHANNELS_MASK 0x00FF |
| #define ABR_CELL_COUNT_REACHED_MULT 0x0100 |
| #define ABR_CELL_COUNT_REACHED_MASK 0xFF |
| |
| /* RX config register */ |
| |
| #define NON_USER_CELLS_IN_ONE_CHANNEL 0x0008 |
| #define RX_ENABLE 0x0010 |
| #define IGNORE_UNUSED_VPI_VCI_BITS_SET 0x0000 |
| #define NON_USER_UNUSED_VPI_VCI_BITS_SET 0x0020 |
| #define DISCARD_UNUSED_VPI_VCI_BITS_SET 0x0040 |
| |
| /* RX line config register */ |
| |
| #define SIGNAL_LOSS 0x0001 |
| #define FREQUENCY_DETECT_ERROR 0x0002 |
| #define LOCK_DETECT_ERROR 0x0004 |
| #define SELECT_INTERNAL_LOOPBACK 0x0008 |
| #define LOCK_DETECT_ENABLE 0x0010 |
| #define FREQUENCY_DETECT_ENABLE 0x0020 |
| #define USER_FRAQ 0x0040 |
| #define GXTALOUT_SELECT_DIV4 0x0080 |
| #define GXTALOUT_SELECT_NO_GATING 0x0100 |
| #define TIMING_MARKER_RECEIVED 0x0200 |
| |
| /* RX channel port */ |
| |
| #define RX_CHANNEL_MASK 0x03FF |
| // UNUSED 0x3C00 |
| #define FLUSH_CHANNEL 0x4000 |
| #define RX_CHANNEL_UPDATE_IN_PROGRESS 0x8000 |
| |
| /* Receive queue entry */ |
| |
| #define RX_Q_ENTRY_LENGTH_MASK 0x0000FFFF |
| #define RX_Q_ENTRY_CHANNEL_SHIFT 16 |
| #define SIMONS_DODGEY_MARKER 0x08000000 |
| #define RX_CONGESTION_EXPERIENCED 0x10000000 |
| #define RX_CRC_10_OK 0x20000000 |
| #define RX_CRC_32_OK 0x40000000 |
| #define RX_COMPLETE_FRAME 0x80000000 |
| |
| /* Offsets and constants for use with the buffer memory */ |
| |
| /* Buffer pointers and channel types */ |
| |
| #define BUFFER_PTR_MASK 0x0000FFFF |
| #define RX_INT_THRESHOLD_MULT 0x00010000 |
| #define RX_INT_THRESHOLD_MASK 0x07FF |
| #define INT_EVERY_N_CELLS 0x08000000 |
| #define CONGESTION_EXPERIENCED 0x10000000 |
| #define FIRST_CELL_OF_AAL5_FRAME 0x20000000 |
| #define CHANNEL_TYPE_AAL5 0x00000000 |
| #define CHANNEL_TYPE_RAW_CELLS 0x40000000 |
| #define CHANNEL_TYPE_AAL3_4 0x80000000 |
| |
| /* Buffer status stuff */ |
| |
| #define BUFF_STATUS_MASK 0x00030000 |
| #define BUFF_STATUS_EMPTY 0x00000000 |
| #define BUFF_STATUS_CELL_AV 0x00010000 |
| #define BUFF_STATUS_LAST_CELL_AV 0x00020000 |
| |
| /* Transmit channel stuff */ |
| |
| /* Receive channel stuff */ |
| |
| #define RX_CHANNEL_DISABLED 0x00000000 |
| #define RX_CHANNEL_IDLE 0x00000001 |
| |
| /* General things */ |
| |
| #define INITIAL_CRC 0xFFFFFFFF |
| |
| // A Horizon u32, a byte! Really nasty. Horizon pointers are (32 bit) |
| // word addresses and so standard C pointer operations break (as they |
| // assume byte addresses); so we pretend that Horizon words (and word |
| // pointers) are bytes (and byte pointers) for the purposes of having |
| // a memory map that works. |
| |
| typedef u8 HDW; |
| |
| typedef struct cell_buf { |
| HDW payload[12]; |
| HDW next; |
| HDW cell_count; // AAL5 rx bufs |
| HDW res; |
| union { |
| HDW partial_crc; // AAL5 rx bufs |
| HDW cell_header; // RAW bufs |
| } u; |
| } cell_buf; |
| |
| typedef struct tx_ch_desc { |
| HDW rd_buf_type; |
| HDW wr_buf_type; |
| HDW partial_crc; |
| HDW cell_header; |
| } tx_ch_desc; |
| |
| typedef struct rx_ch_desc { |
| HDW wr_buf_type; |
| HDW rd_buf_type; |
| } rx_ch_desc; |
| |
| typedef struct rx_q_entry { |
| HDW entry; |
| } rx_q_entry; |
| |
| #define TX_CHANS 8 |
| #define RX_CHANS 1024 |
| #define RX_QS 1024 |
| #define MAX_VCS RX_CHANS |
| |
| /* Horizon buffer memory map */ |
| |
| // TX Channel Descriptors 2 |
| // TX Initial Buffers 8 // TX_CHANS |
| #define BUFN1_SIZE 118 // (126 - TX_CHANS) |
| // RX/TX Start/End Buffers 4 |
| #define BUFN2_SIZE 124 |
| // RX Queue Entries 64 |
| #define BUFN3_SIZE 192 |
| // RX Channel Descriptors 128 |
| #define BUFN4_SIZE 1408 |
| // TOTAL cell_buff chunks 2048 |
| |
| // cell_buf bufs[2048]; |
| // HDW dws[32768]; |
| |
| typedef struct MEMMAP { |
| tx_ch_desc tx_descs[TX_CHANS]; // 8 * 4 = 32 , 0x0020 |
| cell_buf inittxbufs[TX_CHANS]; // these are really |
| cell_buf bufn1[BUFN1_SIZE]; // part of this pool |
| cell_buf txfreebufstart; |
| cell_buf txfreebufend; |
| cell_buf rxfreebufstart; |
| cell_buf rxfreebufend; // 8+118+1+1+1+1+124 = 254 |
| cell_buf bufn2[BUFN2_SIZE]; // 16 * 254 = 4064 , 0x1000 |
| rx_q_entry rx_q_entries[RX_QS]; // 1 * 1024 = 1024 , 0x1400 |
| cell_buf bufn3[BUFN3_SIZE]; // 16 * 192 = 3072 , 0x2000 |
| rx_ch_desc rx_descs[MAX_VCS]; // 2 * 1024 = 2048 , 0x2800 |
| cell_buf bufn4[BUFN4_SIZE]; // 16 * 1408 = 22528 , 0x8000 |
| } MEMMAP; |
| |
| #define memmap ((MEMMAP *)0) |
| |
| /* end horizon specific bits */ |
| |
| typedef enum { |
| aal0, |
| aal34, |
| aal5 |
| } hrz_aal; |
| |
| typedef enum { |
| tx_busy, |
| rx_busy, |
| ultra |
| } hrz_flags; |
| |
| // a single struct pointed to by atm_vcc->dev_data |
| |
| typedef struct { |
| unsigned int tx_rate; |
| unsigned int rx_rate; |
| u16 channel; |
| u16 tx_xbr_bits; |
| u16 tx_pcr_bits; |
| #if 0 |
| u16 tx_scr_bits; |
| u16 tx_bucket_bits; |
| #endif |
| hrz_aal aal; |
| } hrz_vcc; |
| |
| struct hrz_dev { |
| |
| u32 iobase; |
| u32 * membase; |
| |
| struct sk_buff * rx_skb; // skb being RXed |
| unsigned int rx_bytes; // bytes remaining to RX within region |
| void * rx_addr; // addr to send bytes to (for PIO) |
| unsigned int rx_channel; // channel that the skb is going out on |
| |
| struct sk_buff * tx_skb; // skb being TXed |
| unsigned int tx_bytes; // bytes remaining to TX within region |
| void * tx_addr; // addr to send bytes from (for PIO) |
| struct iovec * tx_iovec; // remaining regions |
| unsigned int tx_regions; // number of remaining regions |
| |
| spinlock_t mem_lock; |
| wait_queue_head_t tx_queue; |
| |
| u8 irq; |
| unsigned long flags; |
| u8 tx_last; |
| u8 tx_idle; |
| |
| rx_q_entry * rx_q_reset; |
| rx_q_entry * rx_q_entry; |
| rx_q_entry * rx_q_wrap; |
| |
| struct atm_dev * atm_dev; |
| |
| u32 last_vc; |
| |
| int noof_spare_buffers; |
| u16 spare_buffers[SPARE_BUFFER_POOL_SIZE]; |
| |
| u16 tx_channel_record[TX_CHANS]; |
| |
| // this is what we follow when we get incoming data |
| u32 txer[MAX_VCS/32]; |
| struct atm_vcc * rxer[MAX_VCS]; |
| |
| // cell rate allocation |
| spinlock_t rate_lock; |
| unsigned int rx_avail; |
| unsigned int tx_avail; |
| |
| // dev stats |
| unsigned long tx_cell_count; |
| unsigned long rx_cell_count; |
| unsigned long hec_error_count; |
| unsigned long unassigned_cell_count; |
| |
| struct pci_dev * pci_dev; |
| struct timer_list housekeeping; |
| }; |
| |
| typedef struct hrz_dev hrz_dev; |
| |
| /* macros for use later */ |
| |
| #define BUF_PTR(cbptr) ((cbptr) - (cell_buf *) 0) |
| |
| #define INTERESTING_INTERRUPTS \ |
| (RX_DATA_AV | RX_DISABLED | TX_BUS_MASTER_COMPLETE | RX_BUS_MASTER_COMPLETE) |
| |
| // 190 cells by default (192 TX buffers - 2 elbow room, see docs) |
| #define TX_AAL5_LIMIT (190*ATM_CELL_PAYLOAD-ATM_AAL5_TRAILER) // 9112 |
| |
| // Have enough RX buffers (unless we allow other buffer splits) |
| #define RX_AAL5_LIMIT ATM_MAX_AAL5_PDU |
| |
| /* multi-statement macro protector */ |
| #define DW(x) do{ x } while(0) |
| |
| #define HRZ_DEV(atm_dev) ((hrz_dev *) (atm_dev)->dev_data) |
| #define HRZ_VCC(atm_vcc) ((hrz_vcc *) (atm_vcc)->dev_data) |
| |
| /* Turn the LEDs on and off */ |
| // The LEDs bits are upside down in that setting the bit in the debug |
| // register will turn the appropriate LED off. |
| |
| #define YELLOW_LED DEBUG_BIT_0 |
| #define GREEN_LED DEBUG_BIT_1 |
| #define YELLOW_LED_OE DEBUG_BIT_0_OE |
| #define GREEN_LED_OE DEBUG_BIT_1_OE |
| |
| #define GREEN_LED_OFF(dev) \ |
| wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) | GREEN_LED) |
| #define GREEN_LED_ON(dev) \ |
| wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) &~ GREEN_LED) |
| #define YELLOW_LED_OFF(dev) \ |
| wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) | YELLOW_LED) |
| #define YELLOW_LED_ON(dev) \ |
| wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) &~ YELLOW_LED) |
| |
| typedef enum { |
| round_up, |
| round_down, |
| round_nearest |
| } rounding; |
| |
| #endif /* DRIVER_ATM_HORIZON_H */ |
