| /* |
| * Driver for the NXP SAA7164 PCIe bridge |
| * |
| * Copyright (c) 2009 Steven Toth <stoth@kernellabs.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/wait.h> |
| |
| #include "saa7164.h" |
| |
| int saa7164_api_transition_port(struct saa7164_tsport *port, u8 mode) |
| { |
| int ret; |
| |
| ret = saa7164_cmd_send(port->dev, port->hwcfg.unitid, SET_CUR, |
| SAA_STATE_CONTROL, sizeof(mode), &mode); |
| if (ret != SAA_OK) |
| printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| int saa7164_api_get_fw_version(struct saa7164_dev *dev, u32 *version) |
| { |
| int ret; |
| |
| ret = saa7164_cmd_send(dev, 0, GET_CUR, |
| GET_FW_VERSION_CONTROL, sizeof(u32), version); |
| if (ret != SAA_OK) |
| printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| int saa7164_api_read_eeprom(struct saa7164_dev *dev, u8 *buf, int buflen) |
| { |
| u8 reg[] = { 0x0f, 0x00 }; |
| |
| if (buflen < 128) |
| return -ENOMEM; |
| |
| /* Assumption: Hauppauge eeprom is at 0xa0 on on bus 0 */ |
| /* TODO: Pull the details from the boards struct */ |
| return saa7164_api_i2c_read(&dev->i2c_bus[0], 0xa0 >> 1, sizeof(reg), |
| ®[0], 128, buf); |
| } |
| |
| |
| int saa7164_api_configure_port_mpeg2ts(struct saa7164_dev *dev, |
| struct saa7164_tsport *port, |
| tmComResTSFormatDescrHeader_t *tsfmt) |
| { |
| dprintk(DBGLVL_API, " bFormatIndex = 0x%x\n", tsfmt->bFormatIndex); |
| dprintk(DBGLVL_API, " bDataOffset = 0x%x\n", tsfmt->bDataOffset); |
| dprintk(DBGLVL_API, " bPacketLength= 0x%x\n", tsfmt->bPacketLength); |
| dprintk(DBGLVL_API, " bStrideLength= 0x%x\n", tsfmt->bStrideLength); |
| dprintk(DBGLVL_API, " bguid = (....)\n"); |
| |
| /* Cache the hardware configuration in the port */ |
| |
| port->bufcounter = port->hwcfg.BARLocation; |
| port->pitch = port->hwcfg.BARLocation + (2 * sizeof(u32)); |
| port->bufsize = port->hwcfg.BARLocation + (3 * sizeof(u32)); |
| port->bufoffset = port->hwcfg.BARLocation + (4 * sizeof(u32)); |
| port->bufptr32l = port->hwcfg.BARLocation + |
| (4 * sizeof(u32)) + |
| (sizeof(u32) * port->hwcfg.buffercount) + sizeof(u32); |
| port->bufptr32h = port->hwcfg.BARLocation + |
| (4 * sizeof(u32)) + |
| (sizeof(u32) * port->hwcfg.buffercount); |
| port->bufptr64 = port->hwcfg.BARLocation + |
| (4 * sizeof(u32)) + |
| (sizeof(u32) * port->hwcfg.buffercount); |
| dprintk(DBGLVL_API, " = port->hwcfg.BARLocation = 0x%x\n", |
| port->hwcfg.BARLocation); |
| |
| dprintk(DBGLVL_API, " = VS_FORMAT_MPEGTS (becomes dev->ts[%d])\n", |
| port->nr); |
| |
| return 0; |
| } |
| |
| int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len) |
| { |
| struct saa7164_tsport *port = 0; |
| u32 idx, next_offset; |
| int i; |
| tmComResDescrHeader_t *hdr, *t; |
| tmComResExtDevDescrHeader_t *exthdr; |
| tmComResPathDescrHeader_t *pathhdr; |
| tmComResAntTermDescrHeader_t *anttermhdr; |
| tmComResTunerDescrHeader_t *tunerunithdr; |
| tmComResDMATermDescrHeader_t *vcoutputtermhdr; |
| tmComResTSFormatDescrHeader_t *tsfmt; |
| u32 currpath = 0; |
| |
| dprintk(DBGLVL_API, |
| "%s(?,?,%d) sizeof(tmComResDescrHeader_t) = %d bytes\n", |
| __func__, len, (u32)sizeof(tmComResDescrHeader_t)); |
| |
| for (idx = 0; idx < (len - sizeof(tmComResDescrHeader_t)); ) { |
| |
| hdr = (tmComResDescrHeader_t *)(buf + idx); |
| |
| if (hdr->type != CS_INTERFACE) |
| return SAA_ERR_NOT_SUPPORTED; |
| |
| dprintk(DBGLVL_API, "@ 0x%x = \n", idx); |
| switch (hdr->subtype) { |
| case GENERAL_REQUEST: |
| dprintk(DBGLVL_API, " GENERAL_REQUEST\n"); |
| break; |
| case VC_TUNER_PATH: |
| dprintk(DBGLVL_API, " VC_TUNER_PATH\n"); |
| pathhdr = (tmComResPathDescrHeader_t *)(buf + idx); |
| dprintk(DBGLVL_API, " pathid = 0x%x\n", |
| pathhdr->pathid); |
| currpath = pathhdr->pathid; |
| break; |
| case VC_INPUT_TERMINAL: |
| dprintk(DBGLVL_API, " VC_INPUT_TERMINAL\n"); |
| anttermhdr = |
| (tmComResAntTermDescrHeader_t *)(buf + idx); |
| dprintk(DBGLVL_API, " terminalid = 0x%x\n", |
| anttermhdr->terminalid); |
| dprintk(DBGLVL_API, " terminaltype = 0x%x\n", |
| anttermhdr->terminaltype); |
| switch (anttermhdr->terminaltype) { |
| case ITT_ANTENNA: |
| dprintk(DBGLVL_API, " = ITT_ANTENNA\n"); |
| break; |
| case LINE_CONNECTOR: |
| dprintk(DBGLVL_API, " = LINE_CONNECTOR\n"); |
| break; |
| case SPDIF_CONNECTOR: |
| dprintk(DBGLVL_API, " = SPDIF_CONNECTOR\n"); |
| break; |
| case COMPOSITE_CONNECTOR: |
| dprintk(DBGLVL_API, |
| " = COMPOSITE_CONNECTOR\n"); |
| break; |
| case SVIDEO_CONNECTOR: |
| dprintk(DBGLVL_API, " = SVIDEO_CONNECTOR\n"); |
| break; |
| case COMPONENT_CONNECTOR: |
| dprintk(DBGLVL_API, |
| " = COMPONENT_CONNECTOR\n"); |
| break; |
| case STANDARD_DMA: |
| dprintk(DBGLVL_API, " = STANDARD_DMA\n"); |
| break; |
| default: |
| dprintk(DBGLVL_API, " = undefined (0x%x)\n", |
| anttermhdr->terminaltype); |
| } |
| dprintk(DBGLVL_API, " assocterminal= 0x%x\n", |
| anttermhdr->assocterminal); |
| dprintk(DBGLVL_API, " iterminal = 0x%x\n", |
| anttermhdr->iterminal); |
| dprintk(DBGLVL_API, " controlsize = 0x%x\n", |
| anttermhdr->controlsize); |
| break; |
| case VC_OUTPUT_TERMINAL: |
| dprintk(DBGLVL_API, " VC_OUTPUT_TERMINAL\n"); |
| vcoutputtermhdr = |
| (tmComResDMATermDescrHeader_t *)(buf + idx); |
| dprintk(DBGLVL_API, " unitid = 0x%x\n", |
| vcoutputtermhdr->unitid); |
| dprintk(DBGLVL_API, " terminaltype = 0x%x\n", |
| vcoutputtermhdr->terminaltype); |
| switch (vcoutputtermhdr->terminaltype) { |
| case ITT_ANTENNA: |
| dprintk(DBGLVL_API, " = ITT_ANTENNA\n"); |
| break; |
| case LINE_CONNECTOR: |
| dprintk(DBGLVL_API, " = LINE_CONNECTOR\n"); |
| break; |
| case SPDIF_CONNECTOR: |
| dprintk(DBGLVL_API, " = SPDIF_CONNECTOR\n"); |
| break; |
| case COMPOSITE_CONNECTOR: |
| dprintk(DBGLVL_API, |
| " = COMPOSITE_CONNECTOR\n"); |
| break; |
| case SVIDEO_CONNECTOR: |
| dprintk(DBGLVL_API, " = SVIDEO_CONNECTOR\n"); |
| break; |
| case COMPONENT_CONNECTOR: |
| dprintk(DBGLVL_API, |
| " = COMPONENT_CONNECTOR\n"); |
| break; |
| case STANDARD_DMA: |
| dprintk(DBGLVL_API, " = STANDARD_DMA\n"); |
| break; |
| default: |
| dprintk(DBGLVL_API, " = undefined (0x%x)\n", |
| vcoutputtermhdr->terminaltype); |
| } |
| dprintk(DBGLVL_API, " assocterminal= 0x%x\n", |
| vcoutputtermhdr->assocterminal); |
| dprintk(DBGLVL_API, " sourceid = 0x%x\n", |
| vcoutputtermhdr->sourceid); |
| dprintk(DBGLVL_API, " iterminal = 0x%x\n", |
| vcoutputtermhdr->iterminal); |
| dprintk(DBGLVL_API, " BARLocation = 0x%x\n", |
| vcoutputtermhdr->BARLocation); |
| dprintk(DBGLVL_API, " flags = 0x%x\n", |
| vcoutputtermhdr->flags); |
| dprintk(DBGLVL_API, " interruptid = 0x%x\n", |
| vcoutputtermhdr->interruptid); |
| dprintk(DBGLVL_API, " buffercount = 0x%x\n", |
| vcoutputtermhdr->buffercount); |
| dprintk(DBGLVL_API, " metadatasize = 0x%x\n", |
| vcoutputtermhdr->metadatasize); |
| dprintk(DBGLVL_API, " controlsize = 0x%x\n", |
| vcoutputtermhdr->controlsize); |
| dprintk(DBGLVL_API, " numformats = 0x%x\n", |
| vcoutputtermhdr->numformats); |
| |
| t = (tmComResDescrHeader_t *) |
| ((tmComResDMATermDescrHeader_t *)(buf + idx)); |
| next_offset = idx + (vcoutputtermhdr->len); |
| for (i = 0; i < vcoutputtermhdr->numformats; i++) { |
| t = (tmComResDescrHeader_t *) |
| (buf + next_offset); |
| switch (t->subtype) { |
| case VS_FORMAT_MPEG2TS: |
| tsfmt = |
| (tmComResTSFormatDescrHeader_t *)t; |
| if (currpath == 1) |
| port = &dev->ts1; |
| else |
| port = &dev->ts2; |
| memcpy(&port->hwcfg, vcoutputtermhdr, |
| sizeof(*vcoutputtermhdr)); |
| saa7164_api_configure_port_mpeg2ts(dev, |
| port, tsfmt); |
| break; |
| case VS_FORMAT_MPEG2PS: |
| dprintk(DBGLVL_API, |
| " = VS_FORMAT_MPEG2PS\n"); |
| break; |
| case VS_FORMAT_VBI: |
| dprintk(DBGLVL_API, |
| " = VS_FORMAT_VBI\n"); |
| break; |
| case VS_FORMAT_RDS: |
| dprintk(DBGLVL_API, |
| " = VS_FORMAT_RDS\n"); |
| break; |
| case VS_FORMAT_UNCOMPRESSED: |
| dprintk(DBGLVL_API, |
| " = VS_FORMAT_UNCOMPRESSED\n"); |
| break; |
| case VS_FORMAT_TYPE: |
| dprintk(DBGLVL_API, |
| " = VS_FORMAT_TYPE\n"); |
| break; |
| default: |
| dprintk(DBGLVL_API, |
| " = undefined (0x%x)\n", |
| t->subtype); |
| } |
| next_offset += t->len; |
| } |
| |
| break; |
| case TUNER_UNIT: |
| dprintk(DBGLVL_API, " TUNER_UNIT\n"); |
| tunerunithdr = |
| (tmComResTunerDescrHeader_t *)(buf + idx); |
| dprintk(DBGLVL_API, " unitid = 0x%x\n", |
| tunerunithdr->unitid); |
| dprintk(DBGLVL_API, " sourceid = 0x%x\n", |
| tunerunithdr->sourceid); |
| dprintk(DBGLVL_API, " iunit = 0x%x\n", |
| tunerunithdr->iunit); |
| dprintk(DBGLVL_API, " tuningstandards = 0x%x\n", |
| tunerunithdr->tuningstandards); |
| dprintk(DBGLVL_API, " controlsize = 0x%x\n", |
| tunerunithdr->controlsize); |
| dprintk(DBGLVL_API, " controls = 0x%x\n", |
| tunerunithdr->controls); |
| break; |
| case VC_SELECTOR_UNIT: |
| dprintk(DBGLVL_API, " VC_SELECTOR_UNIT\n"); |
| break; |
| case VC_PROCESSING_UNIT: |
| dprintk(DBGLVL_API, " VC_PROCESSING_UNIT\n"); |
| break; |
| case FEATURE_UNIT: |
| dprintk(DBGLVL_API, " FEATURE_UNIT\n"); |
| break; |
| case ENCODER_UNIT: |
| dprintk(DBGLVL_API, " ENCODER_UNIT\n"); |
| break; |
| case EXTENSION_UNIT: |
| dprintk(DBGLVL_API, " EXTENSION_UNIT\n"); |
| exthdr = (tmComResExtDevDescrHeader_t *)(buf + idx); |
| dprintk(DBGLVL_API, " unitid = 0x%x\n", |
| exthdr->unitid); |
| dprintk(DBGLVL_API, " deviceid = 0x%x\n", |
| exthdr->deviceid); |
| dprintk(DBGLVL_API, " devicetype = 0x%x\n", |
| exthdr->devicetype); |
| if (exthdr->devicetype & 0x1) |
| dprintk(DBGLVL_API, " = Decoder Device\n"); |
| if (exthdr->devicetype & 0x2) |
| dprintk(DBGLVL_API, " = GPIO Source\n"); |
| if (exthdr->devicetype & 0x4) |
| dprintk(DBGLVL_API, " = Video Decoder\n"); |
| if (exthdr->devicetype & 0x8) |
| dprintk(DBGLVL_API, " = Audio Decoder\n"); |
| if (exthdr->devicetype & 0x20) |
| dprintk(DBGLVL_API, " = Crossbar\n"); |
| if (exthdr->devicetype & 0x40) |
| dprintk(DBGLVL_API, " = Tuner\n"); |
| if (exthdr->devicetype & 0x80) |
| dprintk(DBGLVL_API, " = IF PLL\n"); |
| if (exthdr->devicetype & 0x100) |
| dprintk(DBGLVL_API, " = Demodulator\n"); |
| if (exthdr->devicetype & 0x200) |
| dprintk(DBGLVL_API, " = RDS Decoder\n"); |
| if (exthdr->devicetype & 0x400) |
| dprintk(DBGLVL_API, " = Encoder\n"); |
| if (exthdr->devicetype & 0x800) |
| dprintk(DBGLVL_API, " = IR Decoder\n"); |
| if (exthdr->devicetype & 0x1000) |
| dprintk(DBGLVL_API, " = EEPROM\n"); |
| if (exthdr->devicetype & 0x2000) |
| dprintk(DBGLVL_API, |
| " = VBI Decoder\n"); |
| if (exthdr->devicetype & 0x10000) |
| dprintk(DBGLVL_API, |
| " = Streaming Device\n"); |
| if (exthdr->devicetype & 0x20000) |
| dprintk(DBGLVL_API, |
| " = DRM Device\n"); |
| if (exthdr->devicetype & 0x40000000) |
| dprintk(DBGLVL_API, |
| " = Generic Device\n"); |
| if (exthdr->devicetype & 0x80000000) |
| dprintk(DBGLVL_API, |
| " = Config Space Device\n"); |
| dprintk(DBGLVL_API, " numgpiopins = 0x%x\n", |
| exthdr->numgpiopins); |
| dprintk(DBGLVL_API, " numgpiogroups = 0x%x\n", |
| exthdr->numgpiogroups); |
| dprintk(DBGLVL_API, " controlsize = 0x%x\n", |
| exthdr->controlsize); |
| break; |
| case PVC_INFRARED_UNIT: |
| dprintk(DBGLVL_API, " PVC_INFRARED_UNIT\n"); |
| break; |
| case DRM_UNIT: |
| dprintk(DBGLVL_API, " DRM_UNIT\n"); |
| break; |
| default: |
| dprintk(DBGLVL_API, "default %d\n", hdr->subtype); |
| } |
| |
| dprintk(DBGLVL_API, " 1.%x\n", hdr->len); |
| dprintk(DBGLVL_API, " 2.%x\n", hdr->type); |
| dprintk(DBGLVL_API, " 3.%x\n", hdr->subtype); |
| dprintk(DBGLVL_API, " 4.%x\n", hdr->unitid); |
| |
| idx += hdr->len; |
| } |
| |
| return 0; |
| } |
| |
| int saa7164_api_enum_subdevs(struct saa7164_dev *dev) |
| { |
| int ret; |
| u32 buflen = 0; |
| u8 *buf; |
| |
| dprintk(DBGLVL_API, "%s()\n", __func__); |
| |
| /* Get the total descriptor length */ |
| ret = saa7164_cmd_send(dev, 0, GET_LEN, |
| GET_DESCRIPTORS_CONTROL, sizeof(buflen), &buflen); |
| if (ret != SAA_OK) |
| printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| |
| dprintk(DBGLVL_API, "%s() total descriptor size = %d bytes.\n", |
| __func__, buflen); |
| |
| /* Allocate enough storage for all of the descs */ |
| buf = kzalloc(buflen, GFP_KERNEL); |
| if (buf == NULL) |
| return SAA_ERR_NO_RESOURCES; |
| |
| /* Retrieve them */ |
| ret = saa7164_cmd_send(dev, 0, GET_CUR, |
| GET_DESCRIPTORS_CONTROL, buflen, buf); |
| if (ret != SAA_OK) { |
| printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| goto out; |
| } |
| |
| if (saa_debug & DBGLVL_API) |
| saa7164_dumphex16(dev, buf, (buflen/16)*16); |
| |
| saa7164_api_dump_subdevs(dev, buf, buflen); |
| |
| out: |
| kfree(buf); |
| return ret; |
| } |
| |
| int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg, |
| u32 datalen, u8 *data) |
| { |
| struct saa7164_dev *dev = bus->dev; |
| u16 len = 0; |
| int unitid; |
| u32 regval; |
| u8 buf[256]; |
| int ret; |
| |
| dprintk(DBGLVL_API, "%s()\n", __func__); |
| |
| if (reglen > 4) |
| return -EIO; |
| |
| if (reglen == 1) |
| regval = *(reg); |
| else |
| if (reglen == 2) |
| regval = ((*(reg) << 8) || *(reg+1)); |
| else |
| if (reglen == 3) |
| regval = ((*(reg) << 16) | (*(reg+1) << 8) | *(reg+2)); |
| else |
| if (reglen == 4) |
| regval = ((*(reg) << 24) | (*(reg+1) << 16) | |
| (*(reg+2) << 8) | *(reg+3)); |
| |
| /* Prepare the send buffer */ |
| /* Bytes 00-03 source register length |
| * 04-07 source bytes to read |
| * 08... register address |
| */ |
| memset(buf, 0, sizeof(buf)); |
| memcpy((buf + 2 * sizeof(u32) + 0), reg, reglen); |
| *((u32 *)(buf + 0 * sizeof(u32))) = reglen; |
| *((u32 *)(buf + 1 * sizeof(u32))) = datalen; |
| |
| unitid = saa7164_i2caddr_to_unitid(bus, addr); |
| if (unitid < 0) { |
| printk(KERN_ERR |
| "%s() error, cannot translate regaddr 0x%x to unitid\n", |
| __func__, addr); |
| return -EIO; |
| } |
| |
| ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN, |
| EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len); |
| if (ret != SAA_OK) { |
| printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); |
| return -EIO; |
| } |
| |
| dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len); |
| |
| if (saa_debug & DBGLVL_I2C) |
| saa7164_dumphex16(dev, buf, 2 * 16); |
| |
| ret = saa7164_cmd_send(bus->dev, unitid, GET_CUR, |
| EXU_REGISTER_ACCESS_CONTROL, len, &buf); |
| if (ret != SAA_OK) |
| printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); |
| else { |
| if (saa_debug & DBGLVL_I2C) |
| saa7164_dumphex16(dev, buf, sizeof(buf)); |
| memcpy(data, (buf + 2 * sizeof(u32) + reglen), datalen); |
| } |
| |
| return ret == SAA_OK ? 0 : -EIO; |
| } |
| |
| /* For a given 8 bit i2c address device, write the buffer */ |
| int saa7164_api_i2c_write(struct saa7164_i2c *bus, u8 addr, u32 datalen, |
| u8 *data) |
| { |
| struct saa7164_dev *dev = bus->dev; |
| u16 len = 0; |
| int unitid; |
| int reglen; |
| u8 buf[256]; |
| int ret; |
| |
| dprintk(DBGLVL_API, "%s()\n", __func__); |
| |
| if ((datalen == 0) || (datalen > 232)) |
| return -EIO; |
| |
| memset(buf, 0, sizeof(buf)); |
| |
| unitid = saa7164_i2caddr_to_unitid(bus, addr); |
| if (unitid < 0) { |
| printk(KERN_ERR |
| "%s() error, cannot translate regaddr 0x%x to unitid\n", |
| __func__, addr); |
| return -EIO; |
| } |
| |
| reglen = saa7164_i2caddr_to_reglen(bus, addr); |
| if (unitid < 0) { |
| printk(KERN_ERR |
| "%s() error, cannot translate regaddr to reglen\n", |
| __func__); |
| return -EIO; |
| } |
| |
| ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN, |
| EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len); |
| if (ret != SAA_OK) { |
| printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); |
| return -EIO; |
| } |
| |
| dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len); |
| |
| /* Prepare the send buffer */ |
| /* Bytes 00-03 dest register length |
| * 04-07 dest bytes to write |
| * 08... register address |
| */ |
| *((u32 *)(buf + 0 * sizeof(u32))) = reglen; |
| *((u32 *)(buf + 1 * sizeof(u32))) = datalen - reglen; |
| memcpy((buf + 2 * sizeof(u32)), data, datalen); |
| |
| if (saa_debug & DBGLVL_I2C) |
| saa7164_dumphex16(dev, buf, sizeof(buf)); |
| |
| ret = saa7164_cmd_send(bus->dev, unitid, SET_CUR, |
| EXU_REGISTER_ACCESS_CONTROL, len, &buf); |
| if (ret != SAA_OK) |
| printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); |
| |
| return ret == SAA_OK ? 0 : -EIO; |
| } |
| |
| |
| int saa7164_api_modify_gpio(struct saa7164_dev *dev, u8 unitid, |
| u8 pin, u8 state) |
| { |
| int ret; |
| tmComResGPIO_t t; |
| |
| dprintk(DBGLVL_API, "%s(0x%x, %d, %d)\n", |
| __func__, unitid, pin, state); |
| |
| if ((pin > 7) || (state > 2)) |
| return SAA_ERR_BAD_PARAMETER; |
| |
| t.pin = pin; |
| t.state = state; |
| |
| ret = saa7164_cmd_send(dev, unitid, SET_CUR, |
| EXU_GPIO_CONTROL, sizeof(t), &t); |
| if (ret != SAA_OK) |
| printk(KERN_ERR "%s() error, ret = 0x%x\n", |
| __func__, ret); |
| |
| return ret; |
| } |
| |
| int saa7164_api_set_gpiobit(struct saa7164_dev *dev, u8 unitid, |
| u8 pin) |
| { |
| return saa7164_api_modify_gpio(dev, unitid, pin, 1); |
| } |
| |
| int saa7164_api_clear_gpiobit(struct saa7164_dev *dev, u8 unitid, |
| u8 pin) |
| { |
| return saa7164_api_modify_gpio(dev, unitid, pin, 0); |
| } |
| |
| |
| |