| /* |
| * Some of the code in this file has been gleaned from the 64 bit |
| * discontigmem support code base. |
| * |
| * Copyright (C) 2002, IBM Corp. |
| * |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Send feedback to Pat Gaughen <gone@us.ibm.com> |
| */ |
| #include <linux/mm.h> |
| #include <linux/bootmem.h> |
| #include <linux/mmzone.h> |
| #include <linux/acpi.h> |
| #include <linux/nodemask.h> |
| #include <asm/srat.h> |
| #include <asm/topology.h> |
| #include <asm/smp.h> |
| #include <asm/e820.h> |
| |
| /* |
| * proximity macros and definitions |
| */ |
| #define NODE_ARRAY_INDEX(x) ((x) / 8) /* 8 bits/char */ |
| #define NODE_ARRAY_OFFSET(x) ((x) % 8) /* 8 bits/char */ |
| #define BMAP_SET(bmap, bit) ((bmap)[NODE_ARRAY_INDEX(bit)] |= 1 << NODE_ARRAY_OFFSET(bit)) |
| #define BMAP_TEST(bmap, bit) ((bmap)[NODE_ARRAY_INDEX(bit)] & (1 << NODE_ARRAY_OFFSET(bit))) |
| /* bitmap length; _PXM is at most 255 */ |
| #define PXM_BITMAP_LEN (MAX_PXM_DOMAINS / 8) |
| static u8 __initdata pxm_bitmap[PXM_BITMAP_LEN]; /* bitmap of proximity domains */ |
| |
| #define MAX_CHUNKS_PER_NODE 3 |
| #define MAXCHUNKS (MAX_CHUNKS_PER_NODE * MAX_NUMNODES) |
| struct node_memory_chunk_s { |
| unsigned long start_pfn; |
| unsigned long end_pfn; |
| u8 pxm; // proximity domain of node |
| u8 nid; // which cnode contains this chunk? |
| u8 bank; // which mem bank on this node |
| }; |
| static struct node_memory_chunk_s __initdata node_memory_chunk[MAXCHUNKS]; |
| |
| static int __initdata num_memory_chunks; /* total number of memory chunks */ |
| static u8 __initdata apicid_to_pxm[MAX_APICID]; |
| |
| int numa_off __initdata; |
| int acpi_numa __initdata; |
| |
| static __init void bad_srat(void) |
| { |
| printk(KERN_ERR "SRAT: SRAT not used.\n"); |
| acpi_numa = -1; |
| num_memory_chunks = 0; |
| } |
| |
| static __init inline int srat_disabled(void) |
| { |
| return numa_off || acpi_numa < 0; |
| } |
| |
| /* Identify CPU proximity domains */ |
| void __init |
| acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *cpu_affinity) |
| { |
| if (srat_disabled()) |
| return; |
| if (cpu_affinity->header.length != |
| sizeof(struct acpi_srat_cpu_affinity)) { |
| bad_srat(); |
| return; |
| } |
| |
| if ((cpu_affinity->flags & ACPI_SRAT_CPU_ENABLED) == 0) |
| return; /* empty entry */ |
| |
| /* mark this node as "seen" in node bitmap */ |
| BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain_lo); |
| |
| apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo; |
| |
| printk(KERN_DEBUG "CPU %02x in proximity domain %02x\n", |
| cpu_affinity->apic_id, cpu_affinity->proximity_domain_lo); |
| } |
| |
| /* |
| * Identify memory proximity domains and hot-remove capabilities. |
| * Fill node memory chunk list structure. |
| */ |
| void __init |
| acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *memory_affinity) |
| { |
| unsigned long long paddr, size; |
| unsigned long start_pfn, end_pfn; |
| u8 pxm; |
| struct node_memory_chunk_s *p, *q, *pend; |
| |
| if (srat_disabled()) |
| return; |
| if (memory_affinity->header.length != |
| sizeof(struct acpi_srat_mem_affinity)) { |
| bad_srat(); |
| return; |
| } |
| |
| if ((memory_affinity->flags & ACPI_SRAT_MEM_ENABLED) == 0) |
| return; /* empty entry */ |
| |
| pxm = memory_affinity->proximity_domain & 0xff; |
| |
| /* mark this node as "seen" in node bitmap */ |
| BMAP_SET(pxm_bitmap, pxm); |
| |
| /* calculate info for memory chunk structure */ |
| paddr = memory_affinity->base_address; |
| size = memory_affinity->length; |
| |
| start_pfn = paddr >> PAGE_SHIFT; |
| end_pfn = (paddr + size) >> PAGE_SHIFT; |
| |
| |
| if (num_memory_chunks >= MAXCHUNKS) { |
| printk(KERN_WARNING "Too many mem chunks in SRAT." |
| " Ignoring %lld MBytes at %llx\n", |
| size/(1024*1024), paddr); |
| return; |
| } |
| |
| /* Insertion sort based on base address */ |
| pend = &node_memory_chunk[num_memory_chunks]; |
| for (p = &node_memory_chunk[0]; p < pend; p++) { |
| if (start_pfn < p->start_pfn) |
| break; |
| } |
| if (p < pend) { |
| for (q = pend; q >= p; q--) |
| *(q + 1) = *q; |
| } |
| p->start_pfn = start_pfn; |
| p->end_pfn = end_pfn; |
| p->pxm = pxm; |
| |
| num_memory_chunks++; |
| |
| printk(KERN_DEBUG "Memory range %08lx to %08lx" |
| " in proximity domain %02x %s\n", |
| start_pfn, end_pfn, |
| pxm, |
| ((memory_affinity->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) ? |
| "enabled and removable" : "enabled" ) ); |
| } |
| |
| /* Callback for SLIT parsing */ |
| void __init acpi_numa_slit_init(struct acpi_table_slit *slit) |
| { |
| } |
| |
| void acpi_numa_arch_fixup(void) |
| { |
| } |
| /* |
| * The SRAT table always lists ascending addresses, so can always |
| * assume that the first "start" address that you see is the real |
| * start of the node, and that the current "end" address is after |
| * the previous one. |
| */ |
| static __init int node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk) |
| { |
| /* |
| * Only add present memory as told by the e820. |
| * There is no guarantee from the SRAT that the memory it |
| * enumerates is present at boot time because it represents |
| * *possible* memory hotplug areas the same as normal RAM. |
| */ |
| if (memory_chunk->start_pfn >= max_pfn) { |
| printk(KERN_INFO "Ignoring SRAT pfns: %08lx - %08lx\n", |
| memory_chunk->start_pfn, memory_chunk->end_pfn); |
| return -1; |
| } |
| if (memory_chunk->nid != nid) |
| return -1; |
| |
| if (!node_has_online_mem(nid)) |
| node_start_pfn[nid] = memory_chunk->start_pfn; |
| |
| if (node_start_pfn[nid] > memory_chunk->start_pfn) |
| node_start_pfn[nid] = memory_chunk->start_pfn; |
| |
| if (node_end_pfn[nid] < memory_chunk->end_pfn) |
| node_end_pfn[nid] = memory_chunk->end_pfn; |
| |
| return 0; |
| } |
| |
| int __init get_memcfg_from_srat(void) |
| { |
| int i, j, nid; |
| |
| |
| if (srat_disabled()) |
| goto out_fail; |
| |
| if (num_memory_chunks == 0) { |
| printk(KERN_DEBUG |
| "could not find any ACPI SRAT memory areas.\n"); |
| goto out_fail; |
| } |
| |
| /* Calculate total number of nodes in system from PXM bitmap and create |
| * a set of sequential node IDs starting at zero. (ACPI doesn't seem |
| * to specify the range of _PXM values.) |
| */ |
| /* |
| * MCD - we no longer HAVE to number nodes sequentially. PXM domain |
| * numbers could go as high as 256, and MAX_NUMNODES for i386 is typically |
| * 32, so we will continue numbering them in this manner until MAX_NUMNODES |
| * approaches MAX_PXM_DOMAINS for i386. |
| */ |
| nodes_clear(node_online_map); |
| for (i = 0; i < MAX_PXM_DOMAINS; i++) { |
| if (BMAP_TEST(pxm_bitmap, i)) { |
| int nid = acpi_map_pxm_to_node(i); |
| node_set_online(nid); |
| } |
| } |
| BUG_ON(num_online_nodes() == 0); |
| |
| /* set cnode id in memory chunk structure */ |
| for (i = 0; i < num_memory_chunks; i++) |
| node_memory_chunk[i].nid = pxm_to_node(node_memory_chunk[i].pxm); |
| |
| printk(KERN_DEBUG "pxm bitmap: "); |
| for (i = 0; i < sizeof(pxm_bitmap); i++) { |
| printk(KERN_CONT "%02x ", pxm_bitmap[i]); |
| } |
| printk(KERN_CONT "\n"); |
| printk(KERN_DEBUG "Number of logical nodes in system = %d\n", |
| num_online_nodes()); |
| printk(KERN_DEBUG "Number of memory chunks in system = %d\n", |
| num_memory_chunks); |
| |
| for (i = 0; i < MAX_APICID; i++) |
| apicid_2_node[i] = pxm_to_node(apicid_to_pxm[i]); |
| |
| for (j = 0; j < num_memory_chunks; j++){ |
| struct node_memory_chunk_s * chunk = &node_memory_chunk[j]; |
| printk(KERN_DEBUG |
| "chunk %d nid %d start_pfn %08lx end_pfn %08lx\n", |
| j, chunk->nid, chunk->start_pfn, chunk->end_pfn); |
| if (node_read_chunk(chunk->nid, chunk)) |
| continue; |
| |
| e820_register_active_regions(chunk->nid, chunk->start_pfn, |
| min(chunk->end_pfn, max_pfn)); |
| } |
| |
| for_each_online_node(nid) { |
| unsigned long start = node_start_pfn[nid]; |
| unsigned long end = min(node_end_pfn[nid], max_pfn); |
| |
| memory_present(nid, start, end); |
| node_remap_size[nid] = node_memmap_size_bytes(nid, start, end); |
| } |
| return 1; |
| out_fail: |
| printk(KERN_DEBUG "failed to get NUMA memory information from SRAT" |
| " table\n"); |
| return 0; |
| } |