blob: 40edad520770e335c1afc7a7af0463f159972ef4 [file] [log] [blame]
/*
* Interrupt controller driver for Xilinx Virtex FPGAs
*
* Copyright (C) 2007 Secret Lab Technologies Ltd.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*
*/
/*
* This is a driver for the interrupt controller typically found in
* Xilinx Virtex FPGA designs.
*
* The interrupt sense levels are hard coded into the FPGA design with
* typically a 1:1 relationship between irq lines and devices (no shared
* irq lines). Therefore, this driver does not attempt to handle edge
* and level interrupts differently.
*/
#undef DEBUG
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/i8259.h>
#include <asm/irq.h>
/*
* INTC Registers
*/
#define XINTC_ISR 0 /* Interrupt Status */
#define XINTC_IPR 4 /* Interrupt Pending */
#define XINTC_IER 8 /* Interrupt Enable */
#define XINTC_IAR 12 /* Interrupt Acknowledge */
#define XINTC_SIE 16 /* Set Interrupt Enable bits */
#define XINTC_CIE 20 /* Clear Interrupt Enable bits */
#define XINTC_IVR 24 /* Interrupt Vector */
#define XINTC_MER 28 /* Master Enable */
static struct irq_host *master_irqhost;
#define XILINX_INTC_MAXIRQS (32)
/* The following table allows the interrupt type, edge or level,
* to be cached after being read from the device tree until the interrupt
* is mapped
*/
static int xilinx_intc_typetable[XILINX_INTC_MAXIRQS];
/* Map the interrupt type from the device tree to the interrupt types
* used by the interrupt subsystem
*/
static unsigned char xilinx_intc_map_senses[] = {
IRQ_TYPE_EDGE_RISING,
IRQ_TYPE_EDGE_FALLING,
IRQ_TYPE_LEVEL_HIGH,
IRQ_TYPE_LEVEL_LOW,
};
/*
* The interrupt controller is setup such that it doesn't work well with
* the level interrupt handler in the kernel because the handler acks the
* interrupt before calling the application interrupt handler. To deal with
* that, we use 2 different irq chips so that different functions can be
* used for level and edge type interrupts.
*
* IRQ Chip common (across level and edge) operations
*/
static void xilinx_intc_mask(unsigned int virq)
{
int irq = virq_to_hw(virq);
void * regs = get_irq_chip_data(virq);
pr_debug("mask: %d\n", irq);
out_be32(regs + XINTC_CIE, 1 << irq);
}
static int xilinx_intc_set_type(unsigned int virq, unsigned int flow_type)
{
struct irq_desc *desc = get_irq_desc(virq);
desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
desc->status |= IRQ_LEVEL;
return 0;
}
/*
* IRQ Chip level operations
*/
static void xilinx_intc_level_unmask(unsigned int virq)
{
int irq = virq_to_hw(virq);
void * regs = get_irq_chip_data(virq);
pr_debug("unmask: %d\n", irq);
out_be32(regs + XINTC_SIE, 1 << irq);
/* ack level irqs because they can't be acked during
* ack function since the handle_level_irq function
* acks the irq before calling the inerrupt handler
*/
out_be32(regs + XINTC_IAR, 1 << irq);
}
static struct irq_chip xilinx_intc_level_irqchip = {
.typename = "Xilinx Level INTC",
.mask = xilinx_intc_mask,
.mask_ack = xilinx_intc_mask,
.unmask = xilinx_intc_level_unmask,
.set_type = xilinx_intc_set_type,
};
/*
* IRQ Chip edge operations
*/
static void xilinx_intc_edge_unmask(unsigned int virq)
{
int irq = virq_to_hw(virq);
void *regs = get_irq_chip_data(virq);
pr_debug("unmask: %d\n", irq);
out_be32(regs + XINTC_SIE, 1 << irq);
}
static void xilinx_intc_edge_ack(unsigned int virq)
{
int irq = virq_to_hw(virq);
void * regs = get_irq_chip_data(virq);
pr_debug("ack: %d\n", irq);
out_be32(regs + XINTC_IAR, 1 << irq);
}
static struct irq_chip xilinx_intc_edge_irqchip = {
.typename = "Xilinx Edge INTC",
.mask = xilinx_intc_mask,
.unmask = xilinx_intc_edge_unmask,
.ack = xilinx_intc_edge_ack,
.set_type = xilinx_intc_set_type,
};
/*
* IRQ Host operations
*/
/**
* xilinx_intc_xlate - translate virq# from device tree interrupts property
*/
static int xilinx_intc_xlate(struct irq_host *h, struct device_node *ct,
u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq,
unsigned int *out_flags)
{
if ((intsize < 2) || (intspec[0] >= XILINX_INTC_MAXIRQS))
return -EINVAL;
/* keep a copy of the interrupt type til the interrupt is mapped
*/
xilinx_intc_typetable[intspec[0]] = xilinx_intc_map_senses[intspec[1]];
/* Xilinx uses 2 interrupt entries, the 1st being the h/w
* interrupt number, the 2nd being the interrupt type, edge or level
*/
*out_hwirq = intspec[0];
*out_flags = xilinx_intc_map_senses[intspec[1]];
return 0;
}
static int xilinx_intc_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t irq)
{
set_irq_chip_data(virq, h->host_data);
if (xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_HIGH ||
xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_LOW) {
set_irq_chip_and_handler(virq, &xilinx_intc_level_irqchip,
handle_level_irq);
} else {
set_irq_chip_and_handler(virq, &xilinx_intc_edge_irqchip,
handle_edge_irq);
}
return 0;
}
static struct irq_host_ops xilinx_intc_ops = {
.map = xilinx_intc_map,
.xlate = xilinx_intc_xlate,
};
struct irq_host * __init
xilinx_intc_init(struct device_node *np)
{
struct irq_host * irq;
void * regs;
/* Find and map the intc registers */
regs = of_iomap(np, 0);
if (!regs) {
pr_err("xilinx_intc: could not map registers\n");
return NULL;
}
/* Setup interrupt controller */
out_be32(regs + XINTC_IER, 0); /* disable all irqs */
out_be32(regs + XINTC_IAR, ~(u32) 0); /* Acknowledge pending irqs */
out_be32(regs + XINTC_MER, 0x3UL); /* Turn on the Master Enable. */
/* Allocate and initialize an irq_host structure. */
irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, XILINX_INTC_MAXIRQS,
&xilinx_intc_ops, -1);
if (!irq)
panic(__FILE__ ": Cannot allocate IRQ host\n");
irq->host_data = regs;
return irq;
}
int xilinx_intc_get_irq(void)
{
void * regs = master_irqhost->host_data;
pr_debug("get_irq:\n");
return irq_linear_revmap(master_irqhost, in_be32(regs + XINTC_IVR));
}
#if defined(CONFIG_PPC_I8259)
/*
* Support code for cascading to 8259 interrupt controllers
*/
static void xilinx_i8259_cascade(unsigned int irq, struct irq_desc *desc)
{
unsigned int cascade_irq = i8259_irq();
if (cascade_irq)
generic_handle_irq(cascade_irq);
/* Let xilinx_intc end the interrupt */
desc->chip->unmask(irq);
}
static void __init xilinx_i8259_setup_cascade(void)
{
struct device_node *cascade_node;
int cascade_irq;
/* Initialize i8259 controller */
cascade_node = of_find_compatible_node(NULL, NULL, "chrp,iic");
if (!cascade_node)
return;
cascade_irq = irq_of_parse_and_map(cascade_node, 0);
if (!cascade_irq) {
pr_err("virtex_ml510: Failed to map cascade interrupt\n");
goto out;
}
i8259_init(cascade_node, 0);
set_irq_chained_handler(cascade_irq, xilinx_i8259_cascade);
/* Program irq 7 (usb/audio), 14/15 (ide) to level sensitive */
/* This looks like a dirty hack to me --gcl */
outb(0xc0, 0x4d0);
outb(0xc0, 0x4d1);
out:
of_node_put(cascade_node);
}
#else
static inline void xilinx_i8259_setup_cascade(void) { return; }
#endif /* defined(CONFIG_PPC_I8259) */
static struct of_device_id xilinx_intc_match[] __initconst = {
{ .compatible = "xlnx,opb-intc-1.00.c", },
{ .compatible = "xlnx,xps-intc-1.00.a", },
{}
};
/*
* Initialize master Xilinx interrupt controller
*/
void __init xilinx_intc_init_tree(void)
{
struct device_node *np;
/* find top level interrupt controller */
for_each_matching_node(np, xilinx_intc_match) {
if (!of_get_property(np, "interrupts", NULL))
break;
}
BUG_ON(!np);
master_irqhost = xilinx_intc_init(np);
BUG_ON(!master_irqhost);
irq_set_default_host(master_irqhost);
of_node_put(np);
xilinx_i8259_setup_cascade();
}